PDADMAC flocculation of Chinese hamster ovary cells: Enabling a centrifuge-less harvest process for monoclonal antibodies

High titer (>10 g/L) monoclonal antibody (mAb) cell culture processes are typically achieved by maintaining high viable cell densities over longer culture durations. A corresponding increase in the solids and sub-micron cellular debris particle levels are also observed. This higher burden of solids (≥15%) and sub-micron particles typically exceeds the capabilities of a continuous centrifuge to effectively remove the solids without a substantial loss of product and/or the capacity of the harvest filtration train (depth filter followed by membrane filter) used to clarify the centrate. We discuss here the use of a novel and simple two-polymer flocculation method used to harvest mAb from high cell mass cell culture processes. The addition of the polycationic polymer, poly diallyldimethylammonium chloride (PDADMAC) to the cell culture broth flocculates negatively-charged cells and cellular debris via an ionic interaction mechanism. Incorporation of a non-ionic polymer such as polyethylene glycol (PEG) into the PDADMAC flocculation results in larger flocculated particles with faster settling rate compared to PDADMAC-only flocculation. PDADMAC also flocculates the negatively-charged sub-micron particles to produce a feed stream with a significantly higher harvest filter train throughput compared to a typical centrifuged harvest feed stream. Cell culture process variability such as lactate production, cellular debris and cellular densities were investigated to determine the effect on flocculation. Since PDADMAC is cytotoxic, purification process clearance and toxicity assessment were performed.     

Pretreatments for enhancing clarification efficiency of depth filtration during production of monoclonal antibody therapeutics

High cell density, high product titer mammalian cell culture is the new paradigm for production of recombinant proteins. While the typical motivation is to get a high product titer, additional undesirable outcomes often include an increase in percentage solids in the cell culture fluid (cellular debris and sub-micron colloids), thereby offering new challenges to downstream processing. This article focuses on scouting and comparison of different approaches used for clarification of cell culture fluid. The approaches include centrifugation followed by depth filtration, direct depth filtration without centrifugation and feed pretreatment with use of specially designed density gradient filtration to improve efficiency of clarification and removal of process contaminants from feed stream. The work also evaluates impact of three different pretreatment approaches, namely pH adjustment to acidic condition, metal cation (calcium phosphate) flocculation, and polycationic polymer flocculation (using polymer-I and polymer-II). The results obtained indicate that the use of pretreatment significantly improves the clarification efficiency of depth filtration. Pretreatment options like polycationic polymer-I based flocculation resulted in a >5 fold reduction in filter area requirement as well as >6 fold reduction in HCDNA while retaining acceptable recovery of the IgG (>98%). Thus, pretreatment offers a significant reduction in the depth filtration footprint (~5–6 fold decrease in filter area requirement). However, one must take into consideration the process development time required, capital cost, consumable cost, cost of the pretreatment chemical, cost of testing to demonstrate clearance of treatment agent, ease of scale-ability, and process robustness when finalizing the optimal clarification approach.     

Development of a novel and efficient cell culture flocculation process using a stimulus responsive polymer to streamline antibody purification processes

Recent advances in mammalian cell culture processes have significantly increased product titers, but have also resulted in substantial increases in cell density and cellular debris as well as process and product related impurities. As such, with improvements in titer, corresponding improvements in downstream processing are essential. In this study we have developed an alternative antibody harvest process that incorporates flocculation using a novel stimulus responsive polymer, benzylated poly(allylamine), followed by depth filtration. As tested on multiple antibodies, this process demonstrates high process yield, improved clearance of cells and cell debris, and efficient reduction of aggregates, host cell proteins (HCP) and DNA. A wide operating window was established for this novel flocculation process through design of experiments condition screening and optimization. Residual levels of impurities in the Protein A eluate were achieved that potentially meet requirements of drug substance and thus alleviate the burden for further impurities removal in subsequent chromatography steps. In addition, efficient clearance of residual polymer was demonstrated using a fluorescence tagged polymer in the presence of a stimulus reagent. The mechanism of HCP and aggregates removal during flocculation was also explored. This novel and efficient process can be easily integrated into current mAb purification platforms, and may overcome downstream processing challenges. Biotechnol. Bioeng. 2013;110: 2928–2937. © 2013 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.     

Compact Cell Settlers for Perfusion Cultures of Microbial (and Mammalian) Cells

As microbial secretory expression systems have become well developed for microbial yeast cells, such as Saccharomyces cerevisiae and Pichia pastoris, it is advantageous to develop high cell density continuous perfusion cultures of microbial yeast cells to retain the live and productive yeast cells inside the perfusion bioreactor while removing the dead cells and cell debris along with the secreted product protein in the harvest stream. While the previously demonstrated inclined or lamellar settlers can be used for such perfusion bioreactors for microbial cells, the size and footprint requirements of such inefficiently scaled up devices can be quite large in comparison to the bioreactor size. Faced with this constraint, we have now developed novel, patent‐pending compact cell settlers that can be used more efficiently with microbial perfusion bioreactors to achieve high cell densities and bioreactor productivities. Reproducible results from numerous month‐long perfusion culture experiments using these devices attached to the 5 L perfusion bioreactor demonstrate very high cell densities due to substantial sedimentation of the larger live yeast cells which are returned to the bioreactor, while the harvest stream from the top of these cell settlers is a significantly clarified liquid, containing less than 30% and more typically less than 10% of the bioreactor cell concentration. Size of cells in the harvest is smaller than that of the cells in the bioreactor. Accumulated protein collected from the harvest and rate of protein accumulation is significantly (> 6x) higher than the protein produced in repeated fed‐batch cultures over the same culture duration. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:913–922, 2017     

Depth filter material process interaction in the harvest of mammalian cells

Upstream advances have led to increased mAb titers above 5 g/L in 14-day fed-batch cultures. This is accompanied by higher cell densities and process-related impurities such as DNA and Host Cell Protein (HCP), which have caused challenges for downstream operations. Depth filtration remains a popular choice for harvesting CHO cell culture, and there is interest in utilizing these to remove process-related impurities at the harvest stage. Operation of the harvest stage has also been shown to affect the performance of the Protein A chromatography step. In addition, manufacturers are looking to move away from natural materials such as cellulose and Diatomaceous Earth (DE) for better filter consistency and security of supply. Therefore, there is an increased need for further understanding and knowledge of depth filtration. This study investigates the effect of depth filter material and loading on the Protein A resin lifetime with an industrially relevant high cell density feed material (40 million cells/ml). It focuses on the retention of process-related impurities such as DNA and HCP through breakthrough studies and a novel confocal microscopy method for imaging foulant in-situ. An increase in loading of the primary-synthetic filter by a third, led to earlier DNA breakthrough in the secondary filter, with DNA concentration at a throughput of 50 L/m² being more than double. Confocal imaging of the depth filters showed that the foulant was pushed forward into the filter structure with higher loading. The additional two layers in the primary-synthetic filter led to better pressure profiles in both primary and secondary filters but did not help to retain HCP or DNA. Reduced filtrate clarity, as measured by OD600, was 1.6 fold lower in the final filtrate where a synthetic filter train was used. This was also associated with precipitation in the Protein A column feed. Confocal imaging of resin after 100 cycles showed that DNA build-up around the outside of the bead was associated with synthetic filter trains, leading to potential mass transfer problems.     

Clarification of recombinant proteins from high cell density mammalian cell culture systems using new improved depth filters

Increasingly high cell density, high product titer cell cultures containing mammalian cells are being used for the production of recombinant proteins. These high productivity cultures are placing a larger burden on traditional downstream clarification and purification operations due to higher product and impurity levels. Controlled flocculation and precipitation of mammalian cell culture suspensions by acidification or using polymeric flocculants have been employed to enhance clarification throughput and downstream filtration operations. While flocculation is quite effective in agglomerating cell debris and process related impurities such as (host cell) proteins and DNA, the resulting suspension is generally not easily separable solely using conventional depth filtration techniques. As a result, centrifugation is often used for clarification of cells and cell debris before filtration, which can limit process configurations and flexibility due to the investment and fixed nature of a centrifuge. To address this challenge, novel depth filter designs were designed which results in improved primary and secondary direct depth filtration of flocculated high cell density mammalian cell cultures systems feeds, thereby providing single‐use clarification solution. A framework is presented here for optimizing the particle size distribution of the mammalian cell culture systems with the pore size distribution of the gradient depth filter using various pre‐treatment conditions resulting in increased depth filter media utilization and improved clarification capacity. Feed conditions were optimized either by acidification or by polymer flocculation which resulted in the increased average feed particle‐size and improvements in throughput with improved depth filters for several mammalian systems. Biotechnol. Bioeng. 2013; 110: 1964–1972. © 2013 Wiley Periodicals, Inc.     

Analysis of fouling and breakthrough of process related impurities during depth filtration using confocal microscopy

Titer improvement has driven process intensification in mAb manufacture. However, this has come with the drawback of high cell densities and associated process related impurities such as cell debris, host cell protein (HCP), and DNA. This affects the capacity of depth filters and can lead to carryover of impurities to protein A chromatography leading to early resin fouling. New depth filter materials provide the opportunity to remove more process related impurities at this early stage in the process. Hence, there is a need to understand the mechanism of impurity removal within these filters. In this work, the secondary depth filter Millistak+ X0HC (cellulose and diatomaceous earth) is compared with the X0SP (synthetic), by examining the breakthrough of DNA and HCP. Additionally, a novel method was developed to image the location of key impurities within the depth filter structure under a confocal microscope. Flux, tested at 75, 100, and 250 LMH was found to affect the maximal throughput based on the max pressure of 30 psi, but no significant changes were seen in the HCP and DNA breakthrough. However, a drop in cell culture viability, from 87% to 37%, lead to the DNA breakthrough at 10% decreasing from 81 to 55 L/m² for X0HC and from 105 to 47 L/m² for X0SP. The HCP breakthrough was not affected by cell culture viability or filter type. The X0SP filter has a 30%–50% higher max throughput depending on viability, which can be explained by the confocal imaging where the debris and DNA are distributed differently in the layers of the filter pods, with more of the second tighter layer being utilized in the X0SP.     

Application of calcium phosphate flocculation in high-density cell culture fluid with high product titer of monoclonal antibody

The calcium phosphate [Ca₃(PO4)₂] precipitation was used for improving the clarification efficiency in harvest process of the monoclonal antibody (mAb) containing cell culture fluid (CCF) with high turbidity and product titer. The flocculation conditions (concentration, addition order of flocculants, pH, and operation time), and the effect of flocculants on the mAb physical chemical properties (such as distribution of charge variants and aggregates) and process-related impurities removal (such as DNA and CHOP) were evaluated in this study. The results showed that the turbidity of CCF supernatant was significantly reduced at pH 7, 120 min with addition of phosphate ions first, while a high mAb recovery yield was kept in the CCF supernatant after flocculation. Addition of calcium ions at 15–60 mM was sufficient for flocculation in this study. A relationship between turbidity/mAb recovery yield and the concentration of calcium ions was established. More than 85% DNA in the CCF were effectively removed by the addition of optimal concentration of flocculants. Flocculation process of Ca₃(PO4)₂ is an effective pretreatment method in purification processes of mAbs from the CCF with high turbidity and product titer.

     

Single-stage chromatographic clarification of Chinese Hamster Ovary cell harvest reduces cost of protein production

A single-stage clarification was developed using a single-use chromatographic clarification device (CCD) to recover a recombinant protein from Chinese Hamster Ovary (CHO) harvest cell culture fluid (HCCF). Clarification of a CHO HCCF is a complex and costly process, involving multiple stages of centrifugation and/or depth filtration to remove cells and debris and to reduce process-related impurities such as host cell protein (HCP), nucleic acids, and lipids. When using depth filtration, the filter train consists of multiple filters of varying ratios, layers, pore sizes, and adsorptive properties. The depth filters, in combination with a 0.2-micron membrane filter, clarify the HCCF based on size-exclusion, adsorptive, and charge-based mechanisms, and provide robust bioburden control. Each stage of the clarification process requires time, labor, and utilities, with product loss at each step. Here, use of the 3M™ Harvest RC Chromatographic Clarifier, a single-stage CCD, is identified as an alternative strategy to a three-stage filtration train. The CCD results in less overall filter area, less volume for flushing, and higher yield. Using bioprocess cost modeling, the single-stage clarification process was compared to a three-stage filtration process. By compressing the CHO HCCF clarification to a single chromatographic stage, the overall cost of the clarification process was reduced by 17%–30%, depending on bioreactor scale. The main drivers for the cost reduction were reduced total filtration area, labor, time, and utilities. The benefits of the single-stage harvest process extended throughout the downstream process, resulting in a 25% relative increase in cumulative yield with comparable impurity clearance.     

Perfusion culture of hybridoma cells for hyperproduction of IgG(2a) monoclonal antibody in a wave bioreactor-perfusion culture system

A novel wave bioreactor-perfusion culture system was developed for highly efficient production of monoclonal antibody IgG2a (mAb) by hybridoma cells. The system consists of a wave bioreactor, a floating membrane cell-retention filter, and a weight-based perfusion controller. A polyethylene membrane filter with a pore size of 7 microm was floating on the surface of the culture broth for cell retention, eliminating the need for traditional pump around flow loops and external cell separators. A weight-based perfusion controller was designed to balance the medium renewal rate and the harvest rate during perfusion culture. BD Cell mAb Medium (BD Biosciences, CA) was identified to be the optimal basal medium for mAb production during batch culture. A control strategy for perfusion rate (volume of fresh medium/working volume of reactor/day, vvd) was identified as a key factor affecting cell growth and mAb accumulation during perfusion culture, and the optimal control strategy was increasing perfusion rate by 0.15 vvd per day. Average specific mAb production rate was linearly corrected with increasing perfusion rate within the range of investigation. The maximum viable cell density reached 22.3 x 105 and 200.5 x 105 cells/mL in the batch and perfusion culture, respectively, while the corresponding maximum mAb concentration reached 182.4 and 463.6 mg/L and the corresponding maximum total mAb amount was 182.4 and 1406.5 mg, respectively. Not only the yield of viable cell per liter of medium (32.9 x 105 cells/mL per liter medium) and the mAb yield per liter of medium (230.6 mg/L medium) but also the mAb volumetric productivity (33.1 mg/L.day) in perfusion culture were much higher than those (i.e., 22.3 x 105 cells/mL per liter medium, 182.4 mg/L medium, and 20.3 mg/L.day) in batch culture. Relatively fast cell growth and the perfusion culture approach warrant that high biomass and mAb productivity may be obtained in such a novel perfusion culture system (1 L working volume), which offers an alternative approach for producing gram quantity of proteins from industrial cell lines in a liter-size cell culture. The fundamental information obtained in this study may be useful for perfusion culture of hybridoma cells on a large scale.     

Ultra scale-down to define and improve the relationship between flocculation and disc-stack centrifugation

The recovery of intracellular recombinant proteins produced in microbial systems typically requires physical, chemical or thermal treatment of the cells post-harvest to release the product into the broth, followed by removal of the cell debris using centrifugation or tangential flow filtration. Often a precipitation or flocculation step is introduced to facilitate the liquid-solid separation. Due to the complex nature of the cell materials and the unit operations, it is difficult to obtain data at laboratory scale that closely reflect the performance of these operations on larger scales (pilot or manufacturing). This study uses a predictive scale-down model that enables rapid optimization of the operating conditions for a flocculation followed with a centrifugation step using only small volumes (20 mL) of a high solids ( approximately 20% w/w) E. coli heat extract. Results obtained show that, with proper theoretical and experimental consideration to account for high cell density, conditions could be found that improve the beneficial interaction between flocculation and centrifugation. These experiments suggested that adding a higher level of a cationic polymer could substantially increase the strength of the flocculated particles produced, thereby enhancing overall clarification performance in a large scale centrifuge. This was subsequently validated at pilot scale.     

Development and application of an analytical approach to assess an antibody's potential for disulfide reduction

Monoclonal antibody (mAb) interchain disulfide bond reduction has been observed in a recent large-scale clinical manufacturing operation. A massive reduction/precipitation at post-clarification steps has occurred. This note presents the development of a novel analytical approach to identify the “potential reduction”—a unique approach to predict the propensity of a monomeric-profiled mAb to be reduced in the post-harvest stage, such as harvest clarification and/or purification steps. The core of this new approach includes comparing the non-reducing capillary electrophoresis profiles of pre- and post-vacuum treated mAb in harvest cell culture fluid (HCCF). Using this approach, the potential reductions of two in-house mAbs in the unclarified and clarified cell culture harvest were assessed.     

Exploitation of the adsorptive properties of depth filters for host cell protein removal during monoclonal antibody purification

Depth filtration has been widely used during process scale clarification of cell culture supernatants for the removal of cells and cell debris. However, in addition to their filtration capabilities, depth filters also possess the ability to adsorb soluble species. This aspect of depth filtration has largely not been exploited in process scale separations and is usually ignored during cell culture harvest development. Here, we report on the ability of depth filters to adsorptively remove host cell protein contaminants from a recombinant monoclonal antibody process stream and characterize some of the underlying interactions behind the binding phenomenon. Following centrifugation, filtration through a depth filter prior to Protein A chromatographic capture was shown to significantly reduce the level of turbidity observed in the Protein A column eluate of the monoclonal antibody. The Protein A eluate turbidity was shown to be linked to host cell protein contaminant levels in the Protein A column load and not to the DNA content. Analogous to flowthrough chromatography in which residence time/bed height and column loading are key parameters, both the number of passes through the depth filter and the amount of centrifuge centrate loaded on the filter were seen to be important operational parameters governing the adsorptive removal of host cell protein contaminants. Adsorption of proteins to the depth filter was shown to be due to a combination of electrostatic and hydrophobic adsorptive interactions. These results demonstrate the ability to employ depth filtration as an integrative unit operation combining filtration for particulate removal with adsorptive binding for contaminant removal.     

Effects of solution environment on mammalian cell fermentation broth properties: Enhanced impurity removal and clarification performance

The processing of recombinant proteins from high cell density, high product titer cell cultures containing mammalian cells is commonly performed using tangential flow microfiltration (MF). However, the increased cellular debris present in these complex feed streams can prematurely foul the membrane, adversely impacting MF capacity and throughput. In addition, high cell density cell culture streams introduce elevated levels of process‐related impurities, which increase the burden on subsequent purification operations to remove these complex media components and impurities. To address this challenge, an evaluation of mammalian cell culture broth buffer properties was examined to determine if enhanced impurity removal and clarification performance could be achieved. A framework is presented here for establishing optimized mammalian cell culture buffer conditions, involving trade‐offs between product recovery and purification and improved clarification at manufacturing‐scale production. A reduction in cell culture broth pH to 4.7–5.0 induced flocculation and impurity precipitation which increased the average feed particle‐size. These conditions led to enhanced impurity removal and improved MF throughput and filter capacity for several mammalian systems. Feed conditions were further optimized by controlling ionic composition along with pH to improve product recovery from high cell density/high product titer cell cultures. Biotechnol. Bioeng. 2011; 108:50–58. © 2010 Wiley Periodicals, Inc.     

Selective flocculation and precipitation for the improvement of virus-like particle recovery from yeast homogenate

The purification of an intracellular product from a complex mixture of contaminants after cell disruption is a common problem in processes downstream of fermentation systems. This is particularly challenging for the recovery of particulate (80 nm in diameter) multimeric protein products, named virus-like particles (VLPs), from cell debris and other intracellular components. Selective flocculation for debris removal followed by selective precipitation of the target protein can be used as a preclarification step to aid purification. In this paper, selective borax flocculation of cell debris in yeast homogenate, followed by selective poly(ethylene glycol) precipitation of VLPs are defined with a view to demonstrating their potential in aiding the initial clarification stages of the purification sequence. The translation from laboratory scale to pilot scale operation is addressed, demonstrating the challenge of scale-up of solid-liquid separation stages for biological particle processing.     

A scale‐down mimic for mapping the process performance of centrifugation,depth and sterile filtration

In the production of biopharmaceuticals disk‐stack centrifugation is widely used as a harvest step for the removal of cells and cellular debris. Depth filters followed by sterile filters are often then employed to remove residual solids remaining in the centrate. Process development of centrifugation is usually conducted at pilot‐scale so as to mimic the commercial scale equipment but this method requires large quantities of cell culture and significant levels of effort for successful characterization. A scale‐down approach based upon the use of a shear device and a bench‐top centrifuge has been extended in this work towards a preparative methodology that successfully predicts the performance of the continuous centrifuge and polishing filters. The use of this methodology allows the effects of cell culture conditions and large‐scale centrifugal process parameters on subsequent filtration performance to be assessed at an early stage of process development where material availability is limited. Biotechnol. Bioeng. 2016;113: 1934–1941. © 2016 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.     

Near-infrared spectroscopy for bioprocess monitoring and control.

This article describes the calibration of a spectroscopic scanning instrument for the measurement of selected contaminants in a complex biological process stream. Its use is for the monitoring of a process in which contaminants are to be removed selectively by flocculation from yeast cell homogenate. The main contaminants are cell debris, protein, and RNA. A low-cost instrument has been developed for sensitivity in the region of the NIR spectrum (from 1900 to 2500 nm) where preliminary work found NIR signatures from cell debris, protein, and RNA. Calibration models have been derived using a multivariate method for concentrations of these contaminants, such as would be found after the flocculation process. Two strategies were compared for calibrating the NIR instrument. In one case, samples were prepared by adding materials representative of the contaminants to clarified yeast homogenate so the contaminant levels were well known but outside the range of interest. In the other case, where samples were like those from the process stream after flocculation and floc removal, there was uncertainty of analysis of contaminant level, but the calibration was in the range of interest. Calibration using process stream samples gave results close to those derived from traditional assays. When the calibration models were used to predict the contaminant concentrations in previously unseen samples, the correlation coefficients between measurements and predictions were above 90% in all cases but one. The prediction errors were similar to the errors in the traditional assays.     

Kinetics and mechanisms of dissolved organic carbon retention in a headwater stream

Freeze-dried aqueous extracts of autumn-shed maple leaves, birch leaves, and spruce needles were added to a third-order reach of Bear Brook, New Hampshire at concentrations similar to those predicted to occur during peak leaf fall. Leachate from each species was rapidly removed from solution. With initial concentrations of added leachate of approximately 5 mgl^–1, dissolved organics (DOC) uptake ranged from 73 to 130 mg m^–2 h^–1 for the first five hours of travel downstream from the point of addition. There was no preferential removal of DOC of low molecular weight, or of monomeric carbohydrates relative to phenolics or unidentified DOC.Stream sediments and organic debris rapidly removed DOC from solution in laboratory experiments. No significant flocculation or microbial assimilation of sugar maple leachate occurred in stream water alone. Stream sediments showed small increases in respiration with addition of leaf leachate, but no increase in respiration occurred upon addition of leachate to organic debris. Abiotic adsorption due to the high concentrations of exchangeable iron and aluminium in stream sediments may be responsible for much of the rapid removal of leaf leachate observed in field experiments. Abiotic processes appear to retain DOC within the stream, thereby allowing subsequent metabolism of dissolved organic carbon by stream microflora.     

A single-use purification process for the production of a monoclonal antibody produced in a PER.C6 human cell line

Advances in single-use technologies can enable greater speed, flexibility, and a smaller footprint for multi-product production facilities, such as at a contract manufacturer. Recent efforts in the area of cell line and media optimization have resulted in bioreactor productivities that exceed 8 g/L in fed-batch processes or 25 g/L in high-density cell culture processes. In combination with the development of single-use stirred tank bioreactors with larger working volumes, these intensified upstream processes can now be fit into a single-use manufacturing setting. Contrary to these upstream advances, downstream single-use technologies have been slower to follow, mostly limited by low capacity, high cost, and poor scalability. In this study we describe a downstream process based solely on single-use technologies that meets the challenges posed by expression of a mAb (IgG(1)) in a high-density suspension culture of PER.C6 cells. The cell culture harvest was clarified by enhanced cell settling (ECS) and depth filtration. Precipitation was used for crude purification of the mAb. A high capacity chromatographic membrane was then used in bind/elute mode, followed by two membranes in flow-through (FT) mode for polishing. A proof of concept of the entire disposable process was completed for two different scales of the purification train.