Thermal Inactivation Characteristics of Bacterial Spores at Ultrahigh Temperatures

The thermal inactivation characteristics of Bacillus stearothermophilus (1518) spores and putrefactive anaerobe (PA) 3679 (NCA) spores suspended in skim milk were determined after treatment in pilot-plant ultrahigh-temperature (UHT) processing equipment. Temperature-survivor curves were constructed from survival data to emphasize the critical nature of temperature control in process evaluation. Time-survivor curves for PA 3679 spores were concave upward, and decimal reduction time (DRT) curves for these spores supported the observation of a protective response occurring at the longest exposure times. However, exposure time did not markedly affect the extremely high z(D) value obtained for PA 3679 spores. The substitution of Gelysate for Trypticase and Thiotone as the peptone in the sporulation medium increased the relative heat resistance of B. stearothermophilus spores, but lowered the z(D) value from 16 F to 12 F. The DRT curves in all cases were linear, but the z(D) values observed in this study differed considerably from those reported by other workers.     

Heat Injury of Bacillus subtilis Spores at Ultrahigh Temperatures

The following three criteria indicated that Bacillus subtilis A spores were injured, but not completely inactivated, by ultrahigh temperature treatment. (i) Significant reductions in survivors were observed when spores were enumerated with a standard medium but not when the medium contained added CaCl(2) and sodium dipicolinate. (ii) After a damaging heat treatment, more survivors were enumerated with the standard medium after incubation at 32 C than at 45 C, which was opposite to the result with untreated or slightly heated spores. (iii) Apparent numbers of survivors increased during the initial period of 3 C storage when enumerated with the standard medium at 45 C. No injury was evident when survivors were enumerated at either incubation temperature with the medium containing added CaCl(2) and sodium dipicolinate. Heat activation of the spores did not significantly influence the appearance of heat injury. The data suggested that the heat injury occurred in a germination system which was required in the absence of CaCl(2) and sodium dipicolinate.     

超高静压协同中温对凝结芽孢杆菌芽孢灭活动力学规律的研究

研究了超高静压协同中温对凝结芽孢杆菌芽孢在磷酸缓冲液和牛奶(经超高温灭菌)中灭活的动力学规律,并对超高静压的升压过程及相应的灭活效果进行了研究.结果表明,升压过程对凝结芽孢杆菌芽孢灭活的影响不能忽略,且随压力增加这种效果越强,最高使其下降1.77个数量级;凝结芽孢杆菌芽孢在牛奶中比在磷酸缓冲液中有更高的抗性;在3种拟合模型(线性、Weibull和Log-logistic模型)中,线性模型不适合模拟这些存活曲线,而Log-logistic模型能更好地模拟这些存活曲线,其次是Weibull模型.     

超高静压协同中温对凝结芽孢杆菌芽孢灭活动力学规律的研究

研究了超高静压协同中温对凝结芽孢杆菌芽孢在磷酸缓冲液和牛奶(经超高温灭菌)中灭活的动力学规律, 并对超高静压的升压过程及相应的灭活效果进行了研究。结果表明, 升压过程对凝结芽孢杆菌芽孢灭活的影响不能忽略, 且随压力增加这种效果越强, 最高使其下降1.77个数量级; 凝结芽孢杆菌芽孢在牛奶中比在磷酸缓冲液中有更高的抗性; 在3种拟合模型(线性、Weibull和Log-logistic模型)中, 线性模型不适合模拟这些存活曲线, 而Log-logistic模型能更好地模拟这些存活曲线, 其次是Weibull模型。     

Thermal inactivation of ileal loop-reactive Clostridium perfringens type A strains in phosphate buffer and beef gravy.

The thermal resistance of spore crops produced from each of two ileal loop-reactive strains of Clostridium perfringens type A was determined in two suspending vehicles consisting of 0.067 M (pH 7.0) phosphate buffer and a commercial beef gravy. D115.6 values obtained in buffer and enumerated after pretreatment with sodium ethylenediaminetetraacetate and recovery in plating medium containing lysozyme were two- to threefold greater than those obtained without this treatment. D115.6 values obtained with beef gravy were less than those obtained in buffer with or without lysozyme; however, the D98.9 and D104.4 values were 1.3 to 2 times greater than those obtained in buffer with lysozyme. The z values were within the ranges reported by previous investigators.     

Thermal inactivation of ileal loop-reactive Clostridium perfringens type A strains in phosphate buffer and beef gravy.

The thermal resistance of spore crops produced from each of two ileal loop-reactive strains of Clostridium perfringens type A was determined in two suspending vehicles consisting of 0.067 M (pH 7.0) phosphate buffer and a commercial beef gravy. D115.6 values obtained in buffer and enumerated after pretreatment with sodium ethylenediaminetetraacetate and recovery in plating medium containing lysozyme were two- to threefold greater than those obtained without this treatment. D115.6 values obtained with beef gravy were less than those obtained in buffer with or without lysozyme; however, the D98.9 and D104.4 values were 1.3 to 2 times greater than those obtained in buffer with lysozyme. The z values were within the ranges reported by previous investigators.     

Influence of pH on the Heat Inactivation of Staphylococcal Enterotoxin A as Determined by Monkey Feeding and Serological Assay

The effect of pH on the thermal inactivation of staphylococcal enterotoxin A was investigated. Analysis of heated toxin by immunodiffusion in gel indicated that enterotoxin A in beef bouillon was inactivated faster at pH 5.3 than at pH 6.2. The z values (slopes) for the heat inactivation curves at pH 6.2 and 5.3 were 49.5 and 55 F (about 27 and 30 C), respectively. Enterotoxin produced and heated in dialyzed Casamino Acids medium and assayed by monkey feeding was more easily inactivated by heat at pH 5.3 than at pH 7.8. Thermal inactivation curves for enterotoxin A in beef bouillon (5 mug/ml, pH 5.3) were determined by two methods, monkey feeding and serological assay. The z values for the curves obtained by these two methods were both 55 F, although loss of biological or toxic activity of the enterotoxin occurred before loss of serological activity.     

Thermal inactivation of foot-and-mouth disease viruses in suspension

The heat resistance of foot-and-mouth disease virus (FMDV) strains isolated from outbreaks in Thailand was investigated in phosphate-buffered saline (PBS) at 50, 60, 70, 80, 90, and 100 degrees C. The first-order kinetic model fitted most of the observed linear inactivation curves. The ranges of decimal-reduction time (D value) of FMDV strains at 50, 60, 70, 80, 90, and 100 degrees C were 732 to 1,275 s, 16.37 to 42.00 s, 6.06 to 10.87 s, 2.84 to 5.99 s, 1.65 to 3.18 s, and 1.90 to 2.94 s, respectively. The heat resistances of FMDV strains at lower temperature (50 degrees C) were not serotype specific. The effective inactivating temperature is approximately 60 degrees C. Heat resistances of FMDV strains at 90 and 100 degrees C were not statistically different (P > 0.05), while the FMDV serotype O (OPN) appeared to be the most heat resistant at 60 to 80 degrees C. The other observed inactivation curves were linear with shoulder or tailing (biphasic curves). The shoulder effect was mostly observed at 90 and 100 degrees C, while the tailing effect was mostly observed at 50 to 80 degrees C. The adjusted D values in the case of shoulder and tailing effects did not affect the overall estimated heat resistance of these FMDV strains, so even unadjusted D values of deviant inactivation curves were legitimate. The z values of FMDV serotypes O, A, and Asia 1 were 21.78 to 23.26, 20.75 to 22.79, and 19.87 degrees C, respectively. The z values of FMDV strains studied were not statistically significantly different (P > 0.05). The results of this study indicated that the heat resistance in PBS of FMDV strains from Thailand was much less than had been reported for foreign epidemic FMDV strains.     

Thermal inactivation of susceptible and multiantimicrobial-resistant salmonella strains grown in the absence or presence of glucose

The heat resistance of susceptible and multiantimicrobial-resistant Salmonella strains grown to stationary phase in glucose-free tryptic soy broth supplemented with 0.6% yeast extract (TSBYE-G; nonadapted), in regular (0.25% glucose) TSBYE, or in TSBYE-G with 1.00% added glucose (TSBYE+G; acid adapted) was determined at 55, 57, 59, and 61 degrees C. Cultures were heated in sterile 0.1% buffered peptone water (50 microl) in heat-sealed capillary tubes immersed in a thermostatically controlled circulating-water bath. Decimal reduction times (D values) were calculated from survival curves having r(2) values of >0.90 as a means of comparing thermal tolerance among variables. D(59 degrees C) values increased (P < 0.05) from 0.50 to 0.58 to 0.66 min for TSBYE-G, TSBYE, and TSBYE+G cultures, respectively. D(61 degrees C) values of antimicrobial-susceptible Salmonella strains increased (P < 0.05) from 0.14 to 0.19 as the glucose concentration increased from 0.00 to 1.00%, respectively, while D(61 degrees C) values of multiantimicrobial-resistant Salmonella strains did not differ (P > 0.05) between TSBYE-G and TSBYE+G cultures. When averaged across glucose levels and temperatures, there were no differences (P > 0.05) between the D values of susceptible and multiantimicrobial-resistant inocula. Collectively, D values ranged from 4.23 to 5.39, 1.47 to 1.81, 0.50 to 0.66, and 0.16 to 0.20 min for Salmonella strains inactivated at 55, 57, 59, and 61 degrees C, respectively. z(D) values were 1.20, 1.48, and 1.49 degrees C for Salmonella strains grown in TSBYE+G, TSBYE, and TSBYE-G, respectively, while the corresponding activation energies of inactivation were 497, 493, and 494 kJ/mol. Study results suggested a cross-protective effect of acid adaptation on thermal inactivation but no association between antimicrobial susceptibility and the ability of salmonellae to survive heat stress.     

Factors to consider in performing survival studies with insect cells

Summary Insect cell lines are not well-suited to colony formation in liquid medium following low-density cell plating. The present studies demonstrate that the time of addition of fetal bovine serum to the culture medium and the number of γ-irradiated feeder cells added to each plate are important factors in developing a useful colony formation assay. TN-368 lepidopteran and WR69-DM-1 dipteran cell lines were used for these experiments. Both cell types display increased plating efficiencies if serum is added to the medium one or more days prior to plating as compared to adding serum immediately before plating. Growth curves obtained by seeding cells at higher densities also indicate that cell growth is slightly better if serum is added one or more days before seeding. These findings are especially important for survival and toxicity studies because the results demonstrate that even seemingly minor factors involved in cell survival assays may benefit treated cells to a greater degree than untreated control cells, thus providing an erroneous assessment of cell survival. This work was supported by USPHS grant R01-CA34158, awarded by the National Cancer Institute, DHHS, Bethesda, MD.     

Heat Resistance of Spores of Marine and Terrestrial Strains of Clostridium botulinum Type C

Resistance to heat of spores of marine and terrestrial strains of Clostridium botulinum type C in 0.067 m phosphate buffer (pH 7.0) was determined. The marine strains were 6812, 6813, 6814, and 6816; the terrestrial strains were 468 and 571. The inoculum level equaled 10(6) spores/tube with 10 replicate tubes for each time-temperature variable. Heating times were run at three or more temperatures to permit survival of some fraction of the inoculum. Survivors were recovered at 85 F (30 C) in beef infusion broth containing 1% glucose, 0.10% l-cysteine hydrochloride, and 0.14% sodium bicarbonate. D values were calculated for each fractional survivor end point after 6 months of incubation. Thermal resistance curves were constructed from the D value data. D(220) (104 C) values for spores of 468 and 571 equaled 0.90 and 0.40 min, respectively. The corresponding values for spores of 6812, 6813, 6814, and 6816 were 0.12, 0.04, 0.02, and 0.08 min. The z values for the thermal resistance curves ranged from 9.0 to 11.5 F (5.0 to 6.2 C).     

Killer toxin for sake yeast: properties and effects of adenosine 5''-diphosphate and calcium ion on killing action.

The killer character of strain isolated from the main mash of sake brewing which produces a killer substance for sake yeast was transmitted to hybrids of the strain and a standard strain of Saccharomyces cerevisiae through a cytoplasmic determinant. The character was eliminated at 41 degrees C by incubation followed by growth at 30 degrees C. The killer strain produced the killer toxin in a growth-associated manner. A preparation of crude killer toxin extract showed first-order inactivation and a linear Arrhenius plot between 25 and 40 degrees C, with an activation of energy of 55.0 kcal/mol. Addition of 1% of synthetic polymer protected the toxin from inactivation by agitation but not by heat. Enhancement of the killer action toward sensitive yeast cells by only the nucleotide adenosine 5'-diphosphate (ADP) was observed after plating on agar medium as well as after incubation in liquid medium. The addition of CaCl2 reversed the enhancing effect of ADP on killing activity. This action of CaCl2 was inhibited by cycloheximide, suggesting that protein synthesis is required for recovery of toxin-induced cells in the presence of CaCl2. Further, CaCl2 overcame the decrease in the intracellular level of adenosine 5'-triphosphate (ATP) enhanced by ADP in killer-treated cells and also inhibited leakage of ATP from the cells with immediate response. The mode of killing action is discussed in terms of a transient state of the cells and the action of ADP and CaCl2.     

Thermal inactivation of infectious pancreatic necrosis virus in a peptone-salt medium mimicking the water-soluble phase of hydrolyzed fish by-products

Infectious pancreatic necrosis virus (IPNV) (serotype Sp) was exposed to temperatures between 60 and 90°C in a medium mimicking the water-soluble phase of hydrolyzed fish by-products. D values ranged from 290 to 0.5 min, and the z value was approximately 9.8°C. Addition of formic acid to create a pH 4 medium did not enhance heat inactivation. Predicted inactivation effects at different temperature-time combinations are provided.     

Protection of Normal, Lysogenic, and Pyocinogenic Strains Against Ultraviolet Radiation by Bound Acriflavine

The presence of bound acriflavine protects bacteria against the lethal effects of ultraviolet (UV) light, presumably because pyrimidine dimer formation is inhibited. Although acriflavine present in plating medium usually results in reduced viable counts from irradiated bacteria, no enhancement of lethal effects is observed when acriflavine is added to irradiated bacteria left in suspending buffer for 45 min before plating. Acriflavine remaining bound to the deoxyribonucleic acid of irradiated bacteria at the time they are plated likewise does not affect their survival. Protection is precisely dose-modifying unless some killing of bacteria by UV results from induction of prophage, against which bound acriflavine is less protective, or from induction of pyocin, against which there is no protection at all. It is inferred that prophage induction proceeds in part, and pyocin induction wholly, by virtue of effects of UV other than pyrimidine dimerization. The response of Escherichia coli strain B to radiation has been postulated to be attributable in part to induction of a prophage or a lethal protein; but exact dose modification was observed for this strain, to about the same extent, whether or not the irradiated organisms were grown in conditions thought to enhance the expected contribution to killing if such a mechanism were involved. Our results support the hypothesis that the inhibition by acriflavine of dimer formation is attributable to energy transfer mechanisms. They fail to support the hypothesis that shapes of survival curves (in particular the manifestation of "shoulders") can be attributed to inactivation by radiation of repair enzymes.     

Influence of the incubation temperature after heat treatment upon the estimated heat resistance values of spores of Bacillus subtilis

S. CONDÓN, A. PALOP, J. RASO AND F.J. SALA. 1996. The influence of the incubation temperature on the estimated heat resistance for survivors after heat treatment was investigated. The survival curves and the D _t values of spores of Bacillus subtilis heated at different temperatures in pH 7 buffer, obtained after incubating survivors at different temperatures (30, 37, 44 or 51°C), were compared. The incubation temperature influenced the profile of survival curves. Lower incubation temperatures led to bigger D _t values and longer shoulders. D _t values obtained after incubating at 30°C were higher (x3 approx.) than those obtained by incubating at 51°C. The incubation temperature did not modify z values ( z = 9.1). These results show that shoulders are not only due to the activation of dormant spores but also to heat damage repair mechanisms. From the profile of survival curves at different incubation temperatures it would seem that heat damage is accumulative. Cells can repair the initial heat injury, but the accumulation of injuries would eventually make the damage irreversible.     

Identification of a Germination System Involved in the Heat Injury of Bacillus Subtilis Spores

Bacillus subtilis A spores were injured by exposure to heat treatments of 110 to 132 C. Injury was demonstrated by the inability to form colonies on fortified nutrient agar (FNA) unless the medium was supplemented with CaCl(2) and Na(2) dipicolinate (CNA). A preliminary heat treatment fully heat-activated the spores, was not lethal, and did not prevent injury by subsequent secondary heat treatment. Exposure of heat-activated spores to 122 C reduced germination in FNA. The primary germination agents in FNA were identified, and a defined germination medium of glucose, NaCl, l-alanine, and sodium phosphate (GNAP) was developed. Germination of heat-activated spores in GNAP was equivalent to germination in FNA. Injury measured by colony formation on FNA and CNA was correlated to injury measured by reduced germination in both FNA and GNAP. Inactivation of the FNA and GNAP germination systems by secondary treatment exhibited similar kinetics. Therefore, injury expressed as the inability to form colonies on FNA involved alteration of the GNAP germination system.     

Heat inactivation of Salmonella typhimurium DT104 in beef as affected by fat content

The heat resistance of an eight-strain cocktail of Salmonella typhimurium DT104 was determined at 58-65 degrees C in beef containing 7, 12, 18 or 24% fat. Inoculated beef was packaged in bags completely immersed in a circulating water bath and held at 58, 60, 62.5 and 65 degrees C for a predetermined length of time. The surviving cell population was enumerated by spiral plating heat-treated samples onto tryptic soy agar supplemented with 0.6% yeast extract and 1% sodium pyruvate. Preliminary studies on thermal inactivation of the Salmonellae isolates in chicken broth indicated no correlation between heat resistance and origin of the isolates. While linear survival curves were observed in chicken broth, inactivation kinetics in beef showed deviations from the first order kinetics, represented by an initial lag period or shoulder before any death occurred with time. Overall, increased fat levels in beef resulted in longer lag periods and lower D-values, suggesting that the lag periods must be taken into account and added to the D-values for calculating the time required at a specific temperature for achieving a specific lethality for Salm. typhimurium DT104 in beef. Thermal death times from this study will assist the retail food industry to design cooking regimes that ensure safety of beef contaminated with Salm. typhimurium DT104.     

The effectiveness of short-term versus long-term exposures to Photofrin II in killing light-activated tumor cells.

Asynchronous populations of mouse EMT-6 tumor cells were exposed to various doses of 630-nm light in slowly stirred aerobic suspensions after both short-term and long-term exposures to Photofrin II. All survival curves are characterized by a "threshold" light dose below which no cell inactivation occurs followed by a steep light-dose response. Both the shoulder widths and the inactivation curve slopes are functions of Photofrin II concentration. After high doses of light where survival levels are 0.003 and lower, "resistant tails" are observed on some survival curves. Light doses required to inactivate 50% of tumor cell populations were obtained from whole survival curves and their reciprocals (1/D50% survival) used as inactivation "rates". The amount of Photofrin II within cells was measured by a fluorescence assay. Per unit of fluorescence, this photosensitizer is at least 10 times more effective after long-term than after short-term exposures. After long-term exposures, both fluorescence activity and photosensitizing effectiveness are retained in washed cells for several hours. After short-term exposures, a majority of both the fluorescence and photosensitizing activity is lost by multiple washings or stirring in tissue culture medium without drug. These data suggest that the cellular compartments associated with photosensitization after short-term exposures to Photofrin II are probably different from the cellular compartments associated with photosensitization after long-term exposures to the drug. The data are consistent with known properties of the monomeric and oligomeric components of Photofrin II.     

The heat resistance of ascospores of four Saccharomyces spp. isolated from spoiled heat-processed soft drinks and fruit products

The heat resistance ( D and z values) of four Saccharomyces spp., viz. S. bailii, S. cerevisiae, S. chevalieri, S. uvarum , was investigated by a previously described method (Put et al. 1977). The highest heat resistance was observed in ascospores of S. cerevisiae 175 showing a decimal reduction time or death rate constant at 60°C of 22.5 minutes. The average D 60°C values of the remaining species were: S. bailii 10 min; S. chevalieri 13 min; and S. uvarum 1.5 min; while z values varied between 4.0 and 6.5°C. It can be postulated that there may exist some comparison between the mechanism of yeast ascospore and bacterial endospore heat resistance. However, (i) washed Saccharomyces ascospores cannot be stored at 5°C for a longer period than 2–3 weeks without loss of heat resistance; and (ii) ascospore heat survival curves are essentially not linear over the whole range, which may be due to some heterogeneity of the ascospore population tested. Besides, it was observed that the heat resistance ( D 60°C values) of the Saccharomyces ascospores proved to be 50–150-fold higher than the D _60°C values of the corresponding vegetative cells.     

A comparison of media and methods for the recovery of Yersinia enterocolitica and Yersinia enterocolitica-like bacteria from milk containing simulated raw milk microfloras

A number of plating and enrichment media proposed for the isolation of Yersinia enterocolitica from foodstuffs were examined for their ability to recover the type strains of Y. enterocolitica sensu stricto, Y. intermedia, Y. frederiksenii and Y. kristensenii. Nine selective plating media were evaluated for the quantitative recovery of the type strains in pure culture, and their inhibition of other organisms typical of both milk and enteric microfloras. Cefsulodin-irgasan-novobiocin (CIN) agar, incubated for 48 h at 25 degrees C, allowed a high recovery of all the Yersinia spp. and was the most selective medium. The same four type strains were added to UHT milk that had been previously inoculated with bacteria to simulate either freshly drawn or cold stored milk microfloras. Twenty-six enrichment procedures (including cold enrichment, selective enrichment at higher temperatures, two-step procedures and a post-enrichment alkali treatment) were assessed for the efficiency of recovery of the Yersinia spp. Pre-enrichment in trypticase-soy broth (TSB) for 24 h at 22 degrees C followed by selective enrichment in bile-oxalate-sorbose (BOS) medium for 5 d at 22 degrees C and plating on CIN agar (48 h at 25 degrees C) allowed the greatest increase in the numbers of Yersinia spp. and maximum inhibition of the competing microflora.