‘Turn‐off’ fluorescence strategy for determination of hexavalent chromium ions based on copper nanoclusters

Cu nanoclusters (CuNCs) capped by tannic acid (TA) (CuNCs@TA) can be used as a highly sensitive fluorescent probe for Cr(VI) detection. Therefore, a fluorescence detection method for Cr(VI) can be established according to the fluorescence quenching of CuNCs@TA that is caused immediately after the addition of Cr(VI). The fluorescence quenching efficiency of CuNCs@TA was linearly correlated with Cr(VI) concentration within the range 0.03–60 μM, and the detection limit for Cr(VI) was 5 nM. This method was demonstrated to be suitable for detecting Cr(VI) in actual water samples. We found that sodium thiosulfate (ST) can redox with Cr(VI) and therefore restore the fluorescence of CuNCs@TA. The mechanism of CuNCs@TA fluorescence quenching and enhancement by Cr(VI) and ST was investigated in detail. The ‘turn‐on’ fluorescent sensor is of practical significance and has broad application prospects.     

Influence of Cr(III) and Cr(VI) on the interaction between sparfloxacin and calf thymus DNA

Cr(III) and Cr(VI) have different binding capacity with sparfloxacin, and have different combination modes with calf thymus DNA. Selecting these two different metal ions, the influence of them on the binding constants between sparfloxacin (SPFX) and calf thymus DNA, as well as the related mechanism has been studied by using absorption and fluorescence spectroscopy. The result shows that Cr(III) has weaker binding capacity to SPFX in the SPFX-Cr(III) binary system, but influences the binding between SPFX and DNA obviously in SPFX-DNA-Cr(III) ternary system. However, although Cr(VI) has a stronger binding capacity to SPFX, it has no effect on the binding between SPFX and DNA. Referring to the different modes of Cr(III) and Cr(VI) binding to DNA, the mechanism of the influence of metal ions on the binding between SPFX and DNA has been proposed. SPFX can directly bind to DNA by chelating DNA base sites. If a metal ion at certain concentration binds mainly to DNA bases, it can decrease the binding constants between SPFX and DNA through competing with SPFX. While if a metal ion at certain concentration mainly binds to phosphate groups of DNA, it can increase the binding constants by building a bridge between SPFX and DNA. If a metal ion at certain concentrations binds neither to bases nor phosphate groups in DNA, it will have no effect on the binding constant between SPFX and DNA. Our result supports Palumbo's conclusion that the binding between SPFX and the phosphata groups is the precondition for the combination between SPFX and DNA, which is stabilized through stacking interactions between the condensed rings of SPFX and DNA bases.     

Quenching of the intrinsic fluorescence of bovine serum albumin by phenylfluorone-Mo(VI) complex as a probe

In this paper, the binding characteristics of bovine serum albumin (BSA) and phenylfluorone (PF)-molybdenum (Mo(VI)) complex have been studied by fluorophotometry. The binding constants are calculated at different temperatures. The binding distance and the energy transfer efficiency between PF-Mo(VI) complex and protein are obtained on the basis of the theory of Forster energy transfer. DeltaH and DeltaS are calculated to be -7.11 kJ mol-1 and 70.30 J mol-1 K-1, which indicate that electrostatic force plays major role in the interaction of PF-Mo(VI) complex and BSA. The experimental results show that BSA and PF-Mo(VI) complex have strong interactions and the mechanism of quenching belongs to static quenching.     

Spectroscopic studies on the interaction of chromium (VI) and chromium (III) with keyhole limpet hemocyanin

The interactions of keyhole limpet hemocyanin (KLH) with chromium nitrate, potassium dichromate, and chromate were investigated using fluorescence, UV–vis absorption and circular dichroism (CD) spectroscopy under simulated physiological conditions. The experimental results showed that the different forms of chromium could quench the intrinsic fluorescence of KLH following a static quenching mechanism rather than by dynamic collision, which indicated that a Cr–KLH complex was formed. The Stern–Volmer quenching constants for the interaction indicated that the binding reaction of KLH with Cr(VI) was stronger the binding of KLH with Cr(III). The thermodynamic values for binding of Cr(VI) to KLH are ΔH > 0 and ΔS > 0. By contrast, the values for the interaction of Cr(III) with KLH are ΔH < 0 and ΔS < 0. The results of synchronous fluorescence, UV–vis absorption and CD spectroscopy showed that the α‐helical secondary structure and conformation of KLH were altered by different forms of chromium. Copyright © 2016 John Wiley & Sons, Ltd.     

Chromium and human low-density lipoprotein oxidation

Chromium is a catalytic metal able to foster oxidant damage, albeit its capacity to induce human LDL oxidation is to date unkown. Thus, we have investigated whether trivalent and hexavalent chromium, namely Cr(III) and Cr(VI), can induce human LDL oxidation. Cr(III) as CrCl₃ is incapable of inducing LDL oxidation at pH 7.4 or 4.5. However, Cr(III), specifically at physiological pH of 7.4 and in the presence of phosphates, causes an absorbance increase at 234 resembling a spectrophotometric kinetics of LDL oxidation with a lag- and propagation-like phase. In this regard, it is conceivable that peculiar Cr(III) forms such as Cr(III) hydroxide and, especially, Cr(III) polynuclear hydroxocomplexes formed at pH 7.4 interact with phosphates generating species with an intrinsic absorbance at 234 nm, which increases over time resembling a spectrophotometric kinetics of LDL oxidation. Cr(VI), as K₂Cr₂O₇, can instead induce substantial human LDL oxidation at acidic pH such as 4.5, which is typical of the intracellular lysosomal compartment. LDL oxidation is related to binding of Cr(VI) to LDL particles with quenching of the LDL tryptophan fluorescence, and it is inhibited by the metal chelators EDTA and deferoxamine, as well as by the chain-breaking antioxidants butylated hydroxytoluene and probucol. Moreover, Cr(VI)-induced LDL oxidation is inhibited by mannitol conceivably by binding Cr(V) formed from LDL-dependent Cr(VI) reduction and not by scavenging hydroxyl radicals (OH); indeed, the OH scavengers sodium formate and ethanol are ineffective against Cr(VI)-induced LDL oxidation. Notably, heightened LDL lipid hydroperoxide levels and decreased LDL tryptophan fluorescence occur in Cr plating workers, indicating Cr-induced human LDL oxidation in vivo. The biochemical, pathophysiological and clinical implications of these novel findings on chromium and human LDL oxidation are discussed.     

Spectroscopic investigation of the interaction of the toxicant, 2-naphthylamine, with bovine serum albumin

The mechanism of interaction between bovine serum albumin (BSA) and 2-naphthylamine (2-NA) in aqueous solution was investigated by fluorescence spectroscopy, circular dichroism (CD) spectra, and UV-vis spectroscopy. It was proved from fluorescence spectra that the fluorescence quenching of BSA by 2-NA was a result of the formation of complex between 2-NA and BSA, and the binding constants (K(a) ) as well as the numbers of binding sites for 2-NA in BSA were determined according to the modified Stern-Volmer equation. The results of synchronous fluorescence and CD spectra demonstrated 2-NA could decrease the amount of α-helix of BSA, leading to the loosening of protein skeleton. UV-vis spectroscopy and resonance light scattering spectra (RLS) results also suggested the conformation of BSA were changed and the BSA aggregation occured, which could induce toxic effects on the organism.     

In vitro study on binding interaction of quinapril with bovine serum albumin (BSA) using multi-spectroscopic and molecular docking methods

The binding interaction between quinapril (QNPL) and bovine serum albumin (BSA) in vitro has been investigated using UV absorption spectroscopy, steady-state fluorescence spectroscopic, synchronous fluorescence spectroscopy, 3D fluorescence spectroscopy, Fourier transform infrared spectroscopy, circular dichroism, and molecular docking methods for obtaining the binding information of QNPL with BSA. The experimental results confirm that the quenching mechanism of the intrinsic fluorescence of BSA induced by QNPL is static quenching based on the decrease in the quenching constants of BSA in the presence of QNPL with the increase in temperature and the quenching rates of BSA larger than 10¹⁰ L mol^?1 s^?1, indicating forming QNPL–BSA complex through the intermolecular binding interaction. The binding constant for the QNPL–BSA complex is in the order of 10⁵ M^?1, indicating there is stronger binding interaction of QNPL with BSA. The analysis of thermodynamic parameters together with molecular docking study reveal that the main binding forces in the binding process of QNPL with BSA are van der Waal’s forces and hydrogen bonding interaction. And, the binding interaction of BSA with QNPL is an enthalpy-driven process. Based on Förster resonance energy transfer, the binding distance between QNPL and BSA is calculated to be 2.76 nm. The results of the competitive binding experiments and molecular docking confirm that QNPL binds to sub-domain IIA (site I) of BSA. It is confirmed there is a slight change in the conformation of BSA after binding QNPL, but BSA still retains its secondary structure α-helicity.     

Critical role of chromium (Cr)-DNA interactions in the formation of Cr-induced polymerase arresting lesions

The genotoxicity associated with the metabolic reduction of hexavalent chromium [Cr(VI)] is complex and can impede DNA polymerase-mediated replication in vitro. The exact biochemical nature of Cr-induced polymerase arresting lesions (PALs) is not understood, but is believed to involve the formation of Cr-DNA interstrand cross-links (ICLs). The aim of this investigation was to determine the dependence of direct Cr-DNA interactions on the development of PALs in DNA treated with trivalent Cr [Cr(III)] or with Cr(VI) in the presence of ascorbic acid (Asc), a major intracellular reductant, using an in vitro, acellular system. The formation of Cr-DNA adducts, ICLs, and PALs was maximal at Asc:Cr(VI) molar ratios of 0.5-2, but gradually decreased at higher ratios. EDTA, a Cr(III) chelator, significantly decreased Cr-DNA binding and ICL and PAL formation. Co-treatment of DNA with Cr(VI)/Asc and mannitol, a Cr(V) chelator, selectively inhibited the formation of mono/bifunctional DNA adducts and PALs produced by Cr(VI) reduction, but had no effect on Cr(III)-DNA binding or Cr(III)-induced polymerase arrest. Blocking Cr-DNA phosphate interaction by preincubation of DNA with MgCl(2) abrogated DNA binding and ICL and PAL production. DNA strand breaks and abasic sites may lead to the in vitro arrest of DNA polymerases; however, we failed to detect significant increases in the frequency of these lesions following Cr(VI)/Asc treatment. These data indicate that the bifunctional adduction of Cr to DNA phosphates (ICLs) constitutes a major PAL. Furthermore, the generation of DNA strand breaks and abasic sites by Cr(VI) reduction is insufficient to explain PALs observed in vitro.     

Characterization of the interaction between reserpine and bovine serum albumin: spectroscopic approaches

The characteristics of the interaction between reserpine and bovine serum albumin (BSA) were studied by fluorescence, UV-vis absorption and Fourier transform infrared (FT-IR) spectroscopy. Spectroscopic analysis revealed that fluorescence quenching of BSA by reserpine was through a static quenching procedure. The binding constant K(A) of reserpine with BSA at 293, 301 and 309 K was 1.63, 1.78 and 2.35 x 10(5) moL(-1) L respectively, which indicated degree of binding force between reserpine and BSA. There was one binding site between reserpine and BSA. The entropy and enthalpy changes were positive, indicating that interaction of reserpine and BSA was driven mainly by hydrophobic forces. The average binding distance between the donor (BSA) and the acceptor (reserpine) was about 3.84 nm based on the Forster non-radiation energy transfer theory. Results of synchronous fluorescence and FT-IR spectra indicated that the conformation and microenvironment of BSA were changed by the binding of reserpine. The results may provide important insights into the physiological activity of reserpine.     

Distribution, transformation and bioavailability of trivalent and hexavalent chromium in contaminated soil

The purpose of this study was to investigate solid-phase distribution, transformation, and bioavailability of Cr in Cr(III) and Cr(VI) contaminated soils. The effects of EDTA treatment on solid-phase distribution of Cr in soils were also examined. The results show that Cr in both initially Cr(III)- and Cr(VI)-contaminated soils was mainly present in the organic matter bound fraction. Chromium had similar solid-phase distribution and similar overall binding intensity in both Cr(III)- and Cr(VI)-contaminated soils after a growing season. Transformation between Cr(III) and Cr(VI) took place in both Cr(III)- and Cr(VI)-treated soils. Chromium in the Cr(III)-contaminated soils was mostly present as Cr(III), while Cr in Cr(VI)-treated soils was mainly transformed into Cr(III). About 2% of Cr in native non-treated soils was found as Cr(VI). EDTA treatment increased Cr in soluble and exchangeable fraction in Cr(III)-treated soils. In both Cr(III)- and Cr(VI)-contaminated soils, Cr in oxide bound and organic matter bound     

Characterization of intermolecular interaction between cyanidin‐3‐glucoside and bovine serum albumin: Spectroscopic and molecular docking methods

The intermolecular interaction between cyanidin‐3‐glucoside (Cy‐3‐G) and bovine serum albumin (BSA) was investigated using fluorescence, circular dichroism and molecular docking methods. The experimental results revealed that the fluorescence quenching of BSA at 338 nm by Cy‐3‐G resulted from the formation of Cy‐3‐G–BSA complex. The number of binding sites (n) for Cy‐3‐G binding on BSA was approximately equal to 1. The experimental and molecular docking results revealed that after binding Cy‐3‐G to BSA, Cy‐3‐G is closer to the Tyr residue than the Trp residue, the secondary structure of BSA almost not change, the binding process of Cy‐3‐G with BSA is spontaneous, and Cy‐3‐G can be inserted into the hydrophobic cavity of BSA (site II′) in the binding process of Cy‐3‐G with BSA. Moreover, based on the sign and magnitude of the enthalpy and entropy changes (ΔH⁰ = – 29.64 kcal/mol and ΔS⁰ = – 69.51 cal/mol K) and the molecular docking results, it can be suggested that the main interaction forces of Cy‐3‐G with BSA are Van der Waals and hydrogen bonding interactions. Copyright © 2013 John Wiley & Sons, Ltd.     

Interaction between fasudil hydrochloride and bovine serum albumin: spectroscopic study

The interaction between fasudil hydrochloride (FSD) and bovine serum albumin (BSA) was investigated using fluorescence and ultraviolet spectroscopy under imitated physiological conditions. The Stern–Volmer quenching model has been successfully applied and the results revealed that FSD could quench the intrinsic fluorescence of BSA effectively via static quenching. The binding constants and binding sites for the BSA–FSD system were evaluated. The corresponding thermodynamic parameters obtained at different temperatures indicated that hydrophobic force played a major role in the interaction of FSD and BSA. The distance between the donor (BSA) and the acceptor (FSD) was obtained according to fluorescence resonance energy transfer (FRET). Synchronous fluorescence spectroscopy and FT‐IR spectra showed that the conformation of BSA was changed in the presence of FSD. Copyright © 2015 John Wiley & Sons, Ltd.     

Fluorescence spectroscopic studies on the interaction of Gemini surfactant 14‐6‐14 with bovine serum albumin

The interaction of the cationic Gemini surfactant hexamethylene‐1,3‐bis (tetradecyldimethylammonium bromide) (14‐6‐14) with bovine serum albumin (BSA) has been investigated by fluorescence quenching spectra and three‐dimensional (3D) fluorescence spectra. The Stern–Volmer quenching constants K_SV and the corresponding thermodynamic parameters ΔH, ΔG and ΔS have been estimated by the fluorescence quenching method. The results indicated that hydrophobic forces were the predominant intermolecular forces between BSA and the surfactant. Competitive experiments and the number of binding sites calculation show that 14‐6‐14 can be inserted in site‐II (in subdomain IIIA) of BSA. The effect of 14‐6‐14 on the conformation of BSA was evaluated by synchronous fluorescence spectroscopy and 3D fluorescence spectral methods. The results show that the conformation of BSA was changed dramatically in the presence of 14‐6‐14, by binding to the Trp and Try residues of BSA. The investigation provides interaction between BSA and 14‐6‐14 as a model for molecular design and industrial research. Copyright © 2011 John Wiley & Sons, Ltd.     

Mechanical properties of Callitriche cophocarpa leaves under Cr(VI)/Cr(III) influence

Submersed Callitriche cophocarpa is an outstanding Cr phytoremediator in water systems. The mineral elements in waters can penetrate the submersed plant surface. This has led us to the hypothesis that the absorbed Cr can alter the mechanical properties of leaves. These properties were measured by applying atomic force microscopy. C. cophocarpa shoots were immersed in 100 µM (5.2 mg/l) Cr solution for 7 days. Cr was applied independently at two distinct oxidation states as Cr(VI) and Cr(III), known from different physicochemical properties and toxic effects. The contents of elements which were proportional to the fluorescence signal in individual leaves were evaluated using micro-X-ray fluorescence spectroscopy. The results obtained showed that the leaf epidermis significantly changes its elastic properties upon incubation with Cr-supplemented solution. When compared to the control, a drop in the leaf’s stiffness observed for Cr(III) was ca. 42 %. In the case of Cr(VI)-treated leaves, the stiffness raised to ca. 17 %. The changes in elasticity were significantly correlated with the contents of Ca (Pearson’s coefficient r = 0.87, p < 0.017). The results led us to ascertain that it is Cr(III) but not Cr(VI) that significantly influences Ca removal from leaves thus decreasing the stiffness of the leaf’s epidermis.     

A combined spectroscopic and molecular docking approach to characterize binding interaction of megestrol acetate with bovine serum albumin

The binding interactions between megestrol acetate (MA) and bovine serum albumin (BSA) under simulated physiological conditions (pH 7.4) were investigated by fluorescence spectroscopy, circular dichroism and molecular modeling. The results revealed that the intrinsic fluorescence of BSA was quenched by MA due to formation of the MA–BSA complex, which was rationalized in terms of a static quenching procedure. The binding constant (K_b) and number of binding sites (n) for MA binding to BSA were 2.8 × 10⁵ L/mol at 310 K and about 1 respectively. However, the binding of MA with BSA was a spontaneous process due to the negative ∆G⁰ in the binding process. The enthalpy change (∆H⁰) and entropy change (∆S⁰) were – 124.0 kJ/mol and –295.6 J/mol per K, respectively, indicating that the major interaction forces in the binding process of MA with BSA were van der Waals forces and hydrogen bonding. Based on the results of spectroscopic and molecular docking experiments, it can be deduced that MA inserts into the hydrophobic pocket located in subdomain IIIA (site II) of BSA. The binding of MA to BSA leads to a slight change in conformation of BSA but the BSA retained its secondary structure, while conformation of the MA has significant change after forming MA–BSA complex, suggesting that flexibility of the MA molecule supports the binding interaction of BSA with MA. Copyright © 2014 John Wiley & Sons, Ltd.     

Spectral diagnostics of the interaction between pyridoxine hydrochloride and bovine serum albumin in vitro

The interaction between pyridoxine hydrochloride (VB6) and bovine serum albumin (BSA) were studied by spectroscopic methods including fluorescence spectroscopy and UV-visible absorption spectra. The quenching mechanism of fluorescence of BSA by VB6 was discussed. The number of binding sites n and observed binding constant K(b) was measured by fluorescence quenching method. The thermodynamic parameters DeltaH(theta), DeltaG(theta), DeltaS(theta) at different temperatures were calculated and the results indicate the binding reaction is mainly entropy-driven and hydrophobic interaction played major role in the reaction. The distance r between donor (BSA) and acceptor (VB6) was obtained according to FOrster theory of non-radiation energy transfer. Synchronous fluorescence and three-dimensional fluorescence spectra were used to investigate the structural change of BSA molecules with addition of VB6, the result indicates that the secondary structure of BSA molecules is changed in the presence of VB6.     

荧光光谱法研究淫羊藿苷和淫羊藿次苷Ⅰ与牛血清白蛋白的相互作用

在模拟生理条件下应用荧光光谱学方法分别研究了淫羊藿苷和淫羊藿次苷Ⅰ与牛血清白蛋白（BSA）间的结合作用. 根据荧光强度数据,计算出了结合常数KA,结合位点数n和热力学参数（△G, △H 和△S）. 实验结果表明,淫羊藿苷和淫羊藿次苷Ⅰ都能显著猝灭BSA的内源荧光,猝灭机制均为形成基态复合物的单一静态猝灭过程. 不同温度下（17 ℃, 27 ℃, 37 ℃）得到的KA和n值,表明淫羊藿次苷Ⅰ与BSA的结合强于淫羊藿苷. 从得到的热力学参数判断,淫羊藿苷与BSA间的主要作用力是氢键作用和范德华力,而疏水作用和静电引力在淫羊藿次苷Ⅰ与BSA形成复合物过程中起主导作用.而且同步荧光光谱显示,淫羊藿苷和淫羊藿次苷Ⅰ与BSA的结合导致BSA构象发生了变化.