The platinum-olefin binding energy in series of (PH<Subscript>3</Subscript>)<Subscript>2</Subscript>Pt(olefin) complexes - a theoretical study

Theoretical investigation of Pt(0)-olefin organometallic complexes containing tertiary phosphine ligands was focused on the strength of platinum-olefin electronic interaction. DFT theoretical study of electronic effects in a substantial number of ethylene derivatives was evaluated in terms of the Pt-olefin binding energy using MP2 correlation theory. Organometallics bearing coordinated olefins with general formula (R¹R²C = CR³R⁴)Pt(PH₃)₂ [R = various substituents] had been selected, including olefins containing both electron-donor substituents as well as electron-withdrawing groups. The stability of the corresponding complexes increases with a strengthening electron-withdrawal ability of the olefin substituents. Figure Representation of (CH₂ = CHR)Pt(PPh₃)₂ and the stability chart     

G2, G3, and complete basis set calculations of the thermodynamic properties of cis- and trans-triazene

Following our recent study on triazane, we present a follow-up study on the thermodynamic properties of triazane’s unsaturated analog, triazene. We predict optimized structural parameters, vibrational frequencies, enthalpies of formation, enthalpies of combustion, specific enthalpies of combustion, and proton affinities. Our results indicate that the cis form of triazene has a specific enthalpy of combustion of −15.2 kJ g⁻¹ and the trans form has a specific enthalpy of combustion of −14.7 kJ g⁻¹. Figure Structures of cis- and trans-triazane, N₃H₃     

Theoretical study of the hydrogen-bonded complexes serotonin–water/hydrogen peroxide

Eight H-bonded complexes between serotonin (5-hydroxy-tryptamine) and water/hydrogen peroxide were studied at the B3LYP and HF levels of theory, using the 6-31+G(d) basis set. A thermodynamic analysis was performed in order to find the most stable complex. The calculated bonding parameters showed that the most stable H-bonded complex is formed between serotonin and hydrogen peroxide by means of the intermolecular H-bond –H₂N...H–OOH. Fig. a Theoretical study of the hydrogen-bonded supersystems serotonin-water/hydrogen peroxide     

Conformation and tautomerizm of the 2-methyl-4-pyridin-2′-yl-1,5-benzodiazepine molecule. An ab initio study

The protomeric tautomerizm and conformation of the 2-methyl-4-pyridin-2′-yl-1,5-benzodiazepine molecule were investigated, and its three neutral tautomers (B₁,B₂,B₃) and their rotamers (C₁,C₂,C₃) were considered. Full geometry optimizations were carried out at the HF/6-31G* and B3LYP/6-31G* levels in gas phase and in water. The tautomerization processes in water (ɛ = 78.54) were studied by using self-consistent reaction field theory. The calculation showed that the boat conformation is dominant for the seven-membered diazepine ring in all of the structures, even with different double bond positions. The calculated relative free energies (ΔG) showed that the tautomer C₁ was the most stable structure, and its conformer B₁ was the second most stable in the gas phase and in water. Figure 2-Methyl-4-pyridin-2′-yl-1,5-benzodiazepine     

Theoretical 49Ti NMR chemical shifts

⁴⁹Ti chemical shifts for a total of 20 titanium complexes are reported, and several levels of theory are evaluated in order to identify a reliable approach for the calculation of titanium NMR data. The popular B3LYP/6–31G(d)//B3LYP/6–31G(d) proves to give very good agreement with experimental data over a range from 1,400 to −1,300 ppm. The MP2/6–31G(d)//MP2/6–31G(d) level computes even smaller average deviations but fails for TiI₄. This behavior together with its huge demand for computational resources requires careful handling of this theoretical level. In addition, NMR data for five titanium fulvene (or related) complexes are given. Dedicated to Professor Dr. Paul von Ragué Schleyer on the occasion of his 75th birthday     

Synchronous fluorescence determination and molecular modeling of 5-Aminosalicylic acid (5-ASA) interacted with human serum albumin

In this paper, we proposed a new method for the determination of either human serum albumin (HSA) or 5-Aminosalicylic acid (5-ASA) by synchronous fluorescence spectra and examined the interaction between them using the molecular modeling method under simulative physiological conditions. The optimum conditions of synchronous fluorometric determination of HSA were investigated and the method was successfully applied to the determination of 5-ASA added to serum, urine, and saliva samples. The linear range of the determination of HSA and 5-ASA were 1.60 – 414 μg mL⁻¹ and 0.76 –22.95 μg mL⁻¹, the detection limits were 0.552 μg mL⁻¹ and 0.38 μg mL⁻¹, respectively. In addition, the effect of various common ions on the determination of HSA with 5-ASA was also discussed at room temperature. Figure The salicylic acid moiety is located within the binding pocket. The ring of 5-ASA was inserted in the hydrophobic cavity of site I, and it is important to note that the residue ARG-218 and the trptophan residue of HSA (Trp214) are in close proximity to the ring of 5-ASA suggesting the existence of hydrophobic interaction between them.     

Theoretical study of [ XN5 ]− (X=O, S, Se, Te) systems

A series of [XN₅]⁻ (X=O, S, Se, Te) compounds has been examined with ab initio and Density Functional Theory (DFT) methods. The five-membered nitrogen ring series of structures are global minima and may exist or be characterized due to their significant dissociation barriers (29.7–32.7 kcal mol⁻¹). Nucleus-independent chemical shifts (NICS) criteria and the presence of (4n+2) π-electrons confirmed that the five-membered nitrogen ring in their structures exhibits characteristics of aromaticity. Thus, the strong stability of the five-membered nitrogen ring structures may be attributed partially to their aromaticity.      

Comparative QSAR studies on peptide deformylase inhibitors

Comparative quantitative structure–activity relationship (QSAR) analyses of peptide deformylase (PDF) inhibitors were performed with a series of previously published (British Biotech Pharmaceuticals, Oxford, UK) reverse hydroxamate derivatives having antibacterial activity against Escherichia coli PDF, using 2D and 3D QSAR methods, comparative molecular field analysis (CoMFA), comparative molecular similarity indices analysis (CoMSIA), and hologram QSAR (HQSAR). Statistically reliable models with good predictive power were generated from all three methods (CoMFA r ² = 0.957, q ² = 0.569; CoMSIA r ² = 0.924, q ² = 0.520; HQSAR r ² = 0.860, q ² = 0.578). The predictive capability of these models was validated by a set of compounds that were not included in the training set. The models based on CoMFA and CoMSIA gave satisfactory predictive r ² values of 0.687 and 0.505, respectively. The model derived from the HQSAR method showed a low predictability of 0.178 for the test set. In this study, 3D prediction models showed better predictive power than 2D models for the test set. This might be because 3D information is more important in the case of datasets containing compounds with similar skeletons. Superimposition of CoMFA contour maps in the active site of the PDF crystal structure showed a meaningful correlation between receptor–ligand binding and biological activity. The final QSAR models, along with information gathered from 3D contour and 2D contribution maps, could be useful for the design of novel active inhibitors of PDF. Figure Superimposition of comparative molecular field analysis (CoMFA) contour plot in the active site of peptide deformylase (PDF)     

Boron nitride cages from B12N12 to B36N36: square–hexagon alternants vs boron nitride tubes

The structures and stabilities of square–hexagon alternant boron nitrides (B _x N _x , x=12–36) vs their tube isomers containing octagons, decagons and dodecagons have been computed at the B3LYP density functional level of theory with the correlation-consistent cc-pVDZ basis set of Dunning. It is found that octagonal B₂₀N₂₀ and B₂₄N₂₄ tube structures are more stable than their square–hexagon alternants by 18.6 and 2.4 kcal mol⁻¹, respectively, while the square–hexagon alternants of other cages are more stable. Trends in stability as a function of cluster size are discussed.Figure The octagonal B₂₀N₂₀ and B₂₄N₂₄ tube structures are more stable than their square-hexagon alternant cagesDedicated to Professor Dr. Paul von Ragué Schleyer on the occasion of his 75th birthday     

ONIOM DFT/PM3 calculation on the interaction between STI-571 and abelson tyrosine kinase

The ONIOM2 (B3LYP/6–31G (d, p): PM3) and B3LYP/6–31G (d, p) methods were applied to investigate the interaction between STI-571 and abelson tyrosine kinase binding site. The complex of N-[4-methyl-3-(4-pyridin-3-yl-pyrimidin-2-ylamino)- phenyl]-benzamide (part of STI-571) and related 16 amino acid residues were found at B3LYP/6–31G (d, p) level to have hydrogen bonds and π....π stacking interaction, their binding energy via HAF optimization was −20.4 kcal mol⁻¹. The results derived from this study agreed well with the reported observation. Figure Optimized structure of STI-571 and Thr315 in abelson tyrosine kinase based on ONIOM2 method     

Ab initio analysis of the Cope rearrangement of germacrane sesquiterpenoids

The energetics of the Cope rearrangement of 17 germacrane sesquiterpenoids to their respective elemane forms have been calculated using both density functional theory (B3LYP/6-31G*) and post Hartee-Fock (MP2/6-31G**) ab initio methods. The calculations are in qualitative agreement with experimentally observed Cope rearrangements, but the two methods give slightly different results. MP2 calculations generally show more favorable elemene energies compared to the respective germacrenes (by around 3–4 kcal mol⁻¹) and smaller activation energies (by 2–3 kcal mol⁻¹). Additionally, neither method is accurate enough to consistently reproduce the germacrene/elemene equilibrium. Apparently, the generally small energy differences between the two forms in these sesquiterpenoids cannot be adequately reproduced at these levels of calculation. Figure The Cope rearrangement of the germacrane sesquiterpenoid bacchascandon to the elemane shyobunone     

Ab initio and DFT study on the electrophilic addition reaction of bromine to tetracyclo[5.3.0.02,6.03,10]deca–4,8–diene

The electronic and geometric structures of tetracyclo[5.3.0.0^2,6.0^3,10]deca-4,8-diene (hypostrophene) have been investigated by ab initio and DFT/B3LYP methods using the 6-31G* and 6-311G* basis sets. The double bonds of hypostrophene are endo-pyramidalized. The cationic intermediates and products formed in the addition reaction have been investigated using the HF/6-311G*, HF/6-311G**, and B3LYP/6-311G* methods. The bridged bromonium cation was more stable than the U-type cation. Considering that the bridged cation does not isomerize to the less stable U-type cation, it is not possible for the U-type product to be obtained in the reaction. The bridged bromonium cation transformed into the more stable N-type cation and the N-type product was obtained via this cation. The thermodynamic stability of the exo, exo and exo, endo isomers of the N-type dibromide molecule were almost identical. The N-type product was 16.6 kcal mol⁻¹ more stable than the U-type product. Figure General energy diagram of the hypostrophene–bromine (HS–Br₂) system (kcal mol⁻¹) (MP2/6-311G*//HF/6-311G*)     

The decomposition of α-aminophosphine oxides to phosphonic acid derivatives (P<Superscript>III</Superscript>)

Aminophosphine oxides and aminophosphonates are, in general, very stable compounds. However, following phosphorus–carbon bond cleavage in aqueous acidic media these compounds sometimes decompose to phosphonic acids derivatives (P^III). Despite some controversy in the literature, careful analysis supported by theoretical studies leads to the conclusion that decomposition to P^III derivatives proceeds via an elimination reaction. Figure The decomposition of α-aminophosphine oxides to phosphonic acid derivatives (P^III)     

TCNE-aniline charge transfer complex: ab initio and TDDFT investigations in gas phase

The geometric and electronic structure of tetracyanoethylene (TCNE)-aniline (donor-acceptor type) complex has been investigated in gas phase using ab initio and time dependent density functional theory calculations. Both the above calculations predict a composed structure for the complex, in which the interacting site is a C≡N and C=C bond center in the TCNE and, –NH₂ and π-electrons of aniline. The N atom of aniline is oriented toward the TCNE molecule. The charge transfer transition energy, estimated by calculating the ground-to-excited state transition electric dipole moments of the complex, agree well with the reported experimental value in chloroform medium. TCNE-aniline at ground state. TCNE-aniline at excited state     

Optimization of parameters for semiempirical methods V: Modification of NDDO approximations and application to 70 elements

Several modifications that have been made to the NDDO core-core interaction term and to the method of parameter optimization are described. These changes have resulted in a more complete parameter optimization, called PM6, which has, in turn, allowed 70 elements to be parameterized. The average unsigned error (AUE) between calculated and reference heats of formation for 4,492 species was 8.0 kcal mol⁻¹. For the subset of 1,373 compounds involving only the elements H, C, N, O, F, P, S, Cl, and Br, the PM6 AUE was 4.4 kcal mol⁻¹. The equivalent AUE for other methods were: RM1: 5.0, B3LYP 6–31G*: 5.2, PM5: 5.7, PM3: 6.3, HF 6–31G*: 7.4, and AM1: 10.0 kcal mol⁻¹. Several long-standing faults in AM1 and PM3 have been corrected and significant improvements have been made in the prediction of geometries. Figure Calculated structure of the complex ion [Ta₆Cl₁₂]²⁺ (footnote): Reference value in parenthesis Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Pharmacophore mapping of a series of pyrrolopyrimidines,indolopyrimidines and their congeners as multidrug-resistance-associated protein (MRP1) modulators

Pharmacophore mapping studies were undertaken for a series of molecules belonging to pyrrolopyrimidines, indolopyrimidines and their congeners as multidrug resistance-associated protein (MRP1) modulators. A five-point pharmacophore with two hydrogen bond acceptors (A), one lipophilic/hydrophobic group (H), one positive ionic feature (P) and one aromatic ring (R) as pharmacophoric features was developed. The pharmacophore hypothesis yielded a statistically significant 3D-QSAR model, with a correlation coefficient of r ² = 0.799 for training set molecules. The model generated showed excellent predictive power, with a correlation coefficient Q ² = 0.679 for an external test set of 20 molecules. The pharmacophore was further validated using four structurally diverse compounds with MRP1 modulatory activity. These compounds mapped well onto four of the five features of the pharmacophore. The pharmacophore proposed here was then utilised for the successful retrieval of active molecules with diverse chemotypes from database search. The geometry and features of pharmacophore are expected to be useful for the design of selective MRP1 inhibitors. Figure Alignment of multidrug resistance-associated protein (MRP1) inhibitors with the developed pharmacophore. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.