Novel interpenetrating polymer network microspheres of chitosan and methylcellulose for controlled release of theophylline

Interpenetrating polymer network (IPN) microspheres of chitosan (CS) and methylcellulose (MC) were prepared by emulsion-crosslinking in the presence of glutaraldehyde (GA) as a crosslinker. Theophylline (THP), an antiasthmatic drug was encapsulated into IPN microspheres under varying ratios of MC and CS, % drug loading and amount of GA added. IPNs have shown better mechanical properties than pure CS. Cross-link density of the matrices was significantly affected by the amount of GA and MC. Microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy to assess the formation of IPN structure and to confirm the absence of chemical interactions between drug, polymer and crosslinking agent. Particle size was measured by laser light scattering technique. Microspheres with the average particle sizes ranging from 119 to 318 μm were produced. Differential scanning calorimetry (DSC) and X-ray diffraction (X-RD) studies were performed to understand the crystalline nature of drug after encapsulation into IPN microspheres. Theophylline encapsulation of up to 82% was achieved as measured by UV spectrometer. Equilibrium swelling was performed in distilled water. In vitro release studies were performed in both 0.1 N HCl and pH 7.4 buffer solutions. These data indicated a dependence of drug release on the extent of crosslinking and amount of MC added during the preparation of microspheres. The release was extended up to 12 h and release rates were fitted to an empirical equation to compute the diffusional parameters, which indicated a slight deviation from the Fickian trend for the release of theophylline.     

Synthesis and characterization of cross-linked malonylchitosan microspheres for controlled release of acyclovir

The purpose of the present study was to obtain a polymeric system for delayed release of the drug acyclovir (ACV), which can be used for treatment of Herpes simplex and Varicella Zoster. The gelled chitosan (GCT) microspheres were obtained by coacervation-phase separation. They were treated with malonic acid to obtain malonylchitosan (MLCT) microspheres, which were characterized by, Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (¹³C NMR), elemental analysis (CHN), thermogravimetric analysis (TG/DTG) and scanning electron microscopy (SEM). The drug was encapsulated in MLCT microspheres by a contact adsorption technique, and the final formulation (MLCT-ACV), was analyzed for loading efficiency, degree of swelling and in vitro release profiles. The results obtained support the N-substitution of malonyl groups in the MLCT microspheres. The loading efficiency increased with impregnation time and a major amount of drug was encapsulated after 24 h. The swelling rate was higher in acid pH. The median release time was 5.5 h in pH 1.2 and 6.8. The mechanism involved in release was non-Fickian (0.43 < n < 0.85, n = 0.8474) and Super Case II kinetics (n > 1, n = 1.0491) at pH 1.2 and 6.8, respectively.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.     

Synthesis and characterization of chitosan-based pH-sensitive semi-interpenetrating network microspheres for controlled release of diclofenac sodium

pH-Sensitive semi-interpenetrating networks (IPNs) based on chitosan (Cs) and acrylamide-grafted hydroxyethylcellulose (AAm-g-HEC) were prepared in the form of microspheres (MPs) by emulsion-crosslinking technique using glutaraldehyde (GA) as a crosslinker. Diclofenac sodium (DS) drug was successfully encapsulated into IPN microspheres by varying the ratio of Cs and AAm-g-HEC, % drug loading, and amount of GA. DS encapsulation of up to 83% was obtained as measured by UV spectroscopy. MPs with average particle sizes in the range of 188-310 μm were obtained. MPs were characterized by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Differential scanning calorimetry (DSC). Diffusion coefficients (D) of water transport through the microspheres were determined using an empirical equation. In vitro release of DS from these matrices has been investigated in pH 1.2 and 7.4 media.     

Novel pH- and Temperature-Responsive Blend Hydrogel Microspheres of Sodium Alginate and PNIPAAm-g-GG for Controlled Release of Isoniazid

This paper reports the preparation and characterization of novel pH- and thermo-responsive blend hydrogel microspheres of sodium alginate (NaAlg) and poly(N-isopropylacrylamide)(PNIPAAm)-grafted-guar gum (GG) i.e., PNIPAAm-g-GG by emulsion cross-linking method using glutaraldehyde (GA) as a cross-linker. Isoniazid (INZ) was chosen as the model antituberculosis drug to achieve encapsulation up to 62%. INZ has a plasma half-life of 1.5 h, whose release was extended up to 12 h. Fourier transform infrared spectroscopy was used to confirm the grafting reaction and chemical stability of INZ during the encapsulation. Differential scanning calorimetry was used to investigate the drug’s physical state, while powder X-ray diffraction confirmed the molecular level dispersion of INZ in the matrix. Scanning electron microscopy confirmed varying surface morphologies of the drug-loaded microspheres. Temperature- and pH-responsive nature of the blend hydrogel microspheres were investigated by equilibrium swelling, and in vitro release experiments were performed in pH 1.2 and pH 7.4 buffer media at 37°C as well as at 25°C. Kinetics of INZ release was analyzed by Ritger–Peppas empirical equation to compute the diffusional exponent parameter (n), whose value ranged between 0.27 and 0.58, indicating the release of INZ follows a diffusion swelling controlled release mechanism.KEY WORDS: blend hydrogel microsphere, graft copolymer, isoniazid, pH sensitive, temperature sensitive     

Dithioerythritol (DTE) prevents inhibitory effects of triphenyltin (TPT) on the key enzymes of the human sex steroid hormone metabolism

Organotins are known to induce imposex (pseudohermaphroditism) in marine neogastropods and are suggested to act as specific endocrine disruptors, inhibiting the enzyme-mediated conversion of steroid hormones. Therefore, we investigated the in vitro effects of triphenyltin (TPT) on human 5-reductase type 2 (5-Re 2), cytochrome P450 aromatase (P450arom), 17β-hydroxysteroid dehydrogenase type 3 (17β-HSD 3), 3β-HSD type 2 and 17β-HSD type 1 activity. First, the present study demonstrates that significant amounts of TPT occurred in the blood of eight human volunteers (0.17–0.67 μg organotin cation/l, i.e. 0.49–1.92 nmol cation/l). Second, TPT showed variable inhibitory effects on all the enzymes investigated. The mean IC₅₀ values were 0.95 μM for 5-Re 2 (mean of n=4 experiments), 1.5 μM for P450arom (n=5), 4.0 μM for 3β-HSD 2 (n=1), 4.2 μM for 17β-HSD 3 (n=3) and 10.5 μM for 17β-HSD 1 (n=3). To exclude the possibility that the impacts of TPT are mediated by oxidizing essential thiol residues of the enzymes, the putative compensatory effects of the reducing agent dithioerythritol (DTE) were investigated. Co-incubation with DTE (n=3) resulted in dose-response prevention of the inhibitory effects of 100 μM deleterious TPT concentrations on 17β-HSD 3 (EC₅₀ value of 12.9 mM; mean of n=3 experiments), 3β-HSD 2 (0.90 mM; n=3), P450arom (0.91 mM; n=3) and 17β-HSD 1 (0.21 mM; n=3) activity. With these enzymes, the use of 10 mM DTE resulted in an at least 80% antagonistic effect, whereas, the effect of TPT on 5-Re 2 was not compensated. In conclusion, the present study shows that TPT acts as an unspecific, but significant inhibitor of human sex steroid hormone metabolism and suggests that the inhibitory effects are mediated by the interaction of TPT with critical cysteine residues of the enzymes.     

Synthesis, characterization and swelling studies of pH responsive psyllium and methacrylamide based hydrogels for the use in colon specific drug delivery

In order to utilize the psyllium husk a medicinally important natural polysaccharide and to develop the novel hydrogels meant for the colon specific drug delivery, we have prepared psyllium and methacrylamide based polymeric networks by using N,N′-methylenebisacrylamide (NN-MBAAm) as crosslinker and ammonium persulfate (APS) as initiator. To study various structural aspects of the polymeric networks thus formed psy-cl-poly(MAAm), these were characterized with SEMs, FTIR, TGA and swelling studies. The swelling studies of networks were carried out as a function of time, temperature, pH and [NaCl]. Equilibrium swelling has been observed to depend on both composition of the polymer and nature of swelling medium. Maximum percent swelling 1262 was observed for the polymeric network prepared with 19.45 × 10⁻³ mol/L of [NN-MBAAm] at 40 °C in 0.5 M NaOH solution. This article also discusses the release dynamics of tetracycline hydrochloride from the hydrogels, for the evaluation of the drug release mechanism and diffusion coefficients of drug from the polymer matrix. The effect of pH on the release pattern of tetracycline hydrochloride has been studied by varying the pH of the release medium. It has been observed from the release dynamics of drug from the hydrogels that the diffusion exponent ‘n’ have 0.477, 0.423 and 0.427 values and gel characteristic constant ‘k’ have 5.07 × 10⁻², 6.34 × 10⁻² and 6.38 × 10⁻² values, respectively, in distilled water, pH 2.2 buffer and pH 7.4 buffer solution. The values the ‘n’ indicated that the Fickian type diffusion mechanism occurred for the release of tetracycline hydrochloride from drug loaded psy-cl-poly(MAAm) polymers in different release mediums. In Fickian type diffusion mechanism, the rate of polymer chain relaxation is more as compare to the rate of drug diffusion from these hydrogels and release behavior follows Fick’s law of diffusion. In each release medium, the values of the initial diffusion coefficient ‘D_i’ for the release of tetracycline hydrochloride was higher than the values of late time diffusion coefficient ‘D_L’ indicating that in the start, the diffusion of drug from the polymeric matrix was faster as compare to the latter stages.     

Long-term release of clodronate from biodegradable microspheres

This paper describes the formulation of a biodegradable microparticulate drug delivery system containing clodronate, a bisphosphonate intended for the treatment of bone diseases. Microspheres were prepared with several poly(D,L-lactide-co-glycolide) (PLGA) copolymers of various molecular weights and molar compositions and 1 poly(D,L-lactide) (PDLLA) homopolymer by a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation procedure. Critical process parameters and formulation variables (ie, addition of stabilizing agents) were evaluated for their effect on drug encapsulation efficiency and clodronate release rate from microparticles Well-formed clodronate-loaded microspheres were obtained for all polymers by selecting suitable process parameters (inner water/oil volume ratio 1∶16, temperature-raising rate in the solvent evaporation step 1°C/min, 2% wt/vol NaCl in the external aqueous phase). Good yields were obtained in all batches of clodronate microspheres (above 60%); drug encapsulation efficiencies ranged between 49% and 75% depending on the polymer used. Clodronate release from all copolymer microspheres was completed in about 48 hours, while those from PDLLA microspheres required about 20 days. The change of microsphere composition by adding a surfactant such as Span 20 or a viscosing agent such as carboxymethylcellulose extended the long-term release up to 3 months. Clodronate was successfully entrapped in PLGA and PDLLA microspheres, and drug release could be modulated from 48 hours up to 3 months by suitable selection of polymer, composition, additives, and manufacturing conditions. Published: July 11, 2001.     

壳聚糖/有机累托石微球的合成及表征

目的:以牛血清白蛋白(BSA)作为模型药物,制备壳聚糖/有机累托石复合物微球,建立一种安全有效的药物控释传递系统。方法:壳聚糖(CS)/有机累托石(OREC)和海藻酸钠,按照不同的混合比例交联,在Ca2+水溶液中包裹BSA而形成壳核结构的微球。采用傅立叶红外光谱(FTIR)、动态光散射(DLS)、原子力显微镜(AFM)、X-衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)观察研究微球的形态、CS和OREC的插层结构、BSA的包封率和控释效果。结果:口光学显微镜和扫描电镜观察显示,形成了壳核结构的微球。傅里叶变换光谱和X-射线能量分散显示,OREC存在于微球中。小角X-射线衍射证实,CS链成功的插入OREC插层中。BSA的包封率和控释检测结果显示,与纯的CS/ALG形成的微球相比较,CO复合物所形成的微球药物释放率明显提高。结论:OREC-HTCC纳米粒子是良好的蛋白药物载体,具有包封率高、缓释效果好等优点,为CS-OREC作为潜在的药物给药系统的进一步应用提供科学依据。