中国葡萄属植物叶片气孔特征的研究

对起源于中国的葡萄属(Vitis L.)20个种或变种叶片气孔特性进行了观察研究。结果表明:气孔纵径对葡萄属种的分类有较大的价值;气孔比密度(叶片上所有气孔复合体面积与叶片面积之比)与叶片大小呈极显著正相关;气孔密度与气孔纵径呈极显著负相关;所有观察种类的叶片气孔类型均为不规则型。     

冬小麦品种(系)旗叶叶脉性状及其与气孔性状间的关联性

植物叶脉结构决定着叶水分运输能力,而气孔特性则与水分散失有关,研究二者间的关联性对认识与植物水分利用有关的生理功能间关系及其调控有重要理论价值。本研究以冬小麦为例,系统研究了15个小麦品种(系)旗叶的叶脉性状及其与气孔性状间的关联性。结果表明:在小麦3种类型叶脉中,小纵向脉的密度占叶脉密度的65.8%;小纵向脉间距与大纵向脉间距及横向脉间距均呈显著正相关,大、小纵向脉密度与其间距呈极显著负相关;供试小麦品种(系)叶片上、下表面的气孔大小相差不大,但上表面气孔密度显著高于下表面,上、下表面的气孔长、气孔宽与气孔密度存在显著正相关,但气孔长与气孔密度之间存在显著负相关;3种类型叶脉中,大纵向脉与气孔特征间并无显著相关关系,而小纵向脉、横向脉和气孔特征间存在一定的相关性,小麦品种(系)叶脉密度与下表面气孔密度和总气孔密度呈显著正相关,但与上表面气孔长呈显著负相关,从而揭示了小麦品种(系)水分供给和需求存在协调性的结构基础。     

热带雨林木质藤本植物叶片性状及其关联

热带雨林中木质藤本植物较为丰富。随着全球气候变化加剧,木质藤本植物的丰富度具有不断增加的趋势,有可能对热带森林的结构、功能和动态产生重要影响。然而,目前对木质藤本响应环境变化的机制所知甚少。本研究以13个科20种热带雨林常见木质藤本植物为材料,测定了冠层叶片的17个形态特征及结构性状,并分析了性状间的相互关系。结果表明,叶片相对含水量的种间变异最小（变异系数为5%）,而上表皮厚度的种间变异最大（变异系数为80%）,其它性状的种间变异系数为24%~61%。木质藤本植物的叶脉密度、叶片密度均与气孔密度呈显著正相关,叶片干物质含量与比叶面积呈显著负相关。与相同生境的树木相比,木质藤本的叶面积更小、气孔密度和叶片密度更低、比叶面积更高,但两种植物类群的叶片横切面组织结构厚度无显著差异。研究结果对理解木质藤本植物的生态适应性具有重要意义。     

灰木莲种源幼苗叶片性状表型多样性分析

以越南收集的12个灰木莲（Manglietia conifera Dandy）种源为材料,对叶片形态性状（叶长、叶宽、叶面积、叶周长、长宽比、叶柄）以及微形态特征（气孔器密度、气孔器长、气孔器宽、气孔器面积、长宽比）进行测定,采用方差分析、变异系数、相关分析和主成分分析等方法进行分析。结果表明：灰木莲不同种源间的叶表型性状存在显著差异;种源中,LC2的叶形态性状的平均变异系数最大（22.09%）,TQ2的变异系数最小（12.76%）;叶表型性状中,叶面积的变异系数最大（28.60%）,气孔器宽的变异系数最小（5.19%）;相关性分析结果表明叶表型性状间存在显著或极显著的相关关系,而地理因素中经度与叶周长显著相关,经纬度与叶长宽比呈显著相关,海拔与叶表型性状间的相关性不显著（P<0.05）;主成分分析表明前3个主成分的累计贡献率达到了89.29%,基本代表原始性状的全部信息。灰木莲12个种源经聚类分析在欧式距离5阈值处可分为4类。灰木莲种源间的叶表型性状存在着丰富的变异,纬度对灰木莲叶形态特征有明显影响,灰木莲种源间和性状间的变异程度存在着差异,本研究为灰木莲遗传改良提供理论依据。     

檫木叶片性状沿海拔梯度的响应特征

植物叶片性状是植物与环境长期互作的结果,对环境变化具有敏锐的捕捉力,而且植物叶片性状影响植物的"投资-收益"关系。本文以天目山不同海拔的檫木叶片为材料,分析檫木叶面积、叶长宽比、叶片干重和比叶面积等叶片形态性状以及叶绿素含量和叶氮含量(N_(area))等叶片生理性状对海拔的响应。结果表明,不同海拔亚群体间叶面积具有显著差异,比叶面积、叶长宽比和叶片干重存在极显著差异;叶长宽比和叶片干重在亚群体内的变异系数小于叶面积和比叶面积,说明檫木叶片形态性状在亚群体间存在着不同程度的变异。比叶面积与叶面积和叶长宽比具有显著正相关,与叶片干重呈显著负相关;叶绿素含量与N_(area)呈显著正相关;通过檫木叶片性状与温度的线性回归表明,叶面积、比叶面积、叶绿素含量和N_(area)随着温度下降而下降,与之相反,叶片干重和叶长宽比则逐渐增加。     

引种期同质园翅荚木主要叶功能性状与种源地环境关系

从比叶面积(SLA)、叶片相对含水量(LRWC)、叶组织密度(LTD)、叶片干物质含量(LDMC)、叶片碳(C)氮(N)磷(P)含量及其化学计量比等方面对在引种期同质园的广西桂林市(GGL)、广西靖西市(GJX)、湖南江华县(HJH)、湖南通道市县(HTD)、广东英德市(GYD)等5翅荚木种源叶片主要功能性状进行差异分析及相关性分析,并研究翅荚木叶功能性状与种源地环境因子的关系。结果显示,(1)不同种源间叶片C、N含量及C/N差异显著,5种源间叶片C含量GYD最高、GGL最低,N含量GJX最高、GYD最低,C/N为GYD最高、GJX最低。(2)比叶面积与叶组织密度呈显著负相关;叶片N含量与C/N和C/P呈显著负相关,与N/P呈显著正相关;C/P与P含量呈显著负相关,与C/N呈显著正相关;C/N与N/P呈显著负相关。(3)翅荚木叶功能性状主要受七月均温、年均温和相对湿度等地理环境因子影响。七月均温与C/P、比叶面积呈正相关,与叶片N含量、叶片干物质含量、叶组织密度呈负相关;年均温与C/N呈正相关,与N/P呈负相关;相对湿度与叶片P含量、叶组织密度呈正相关,与C/P、比叶面积呈负相关。研究结果有助于理解翅荚木对引种区的环境适应特征及其在引种期的生长与生存策略,对探究翅荚木的养分利用策略、揭示其对环境变化的响应机制等具有重要意义,并为相关部门选择适宜的翅荚木引种栽培种源及开展其优良种源的遗传改良等提供理论指导与决策参考。     

青藏高原矮火绒草(Leontopodium nanum)叶片性状对海拔高度变化的响应

植物叶片对环境变化十分敏感,能反映植物适应环境所形成的生存策略。为揭示高寒植物叶片性状对海拔高度变化的响应,对位于青藏高原东北部的冷龙岭3400—4200 m之间5个不同海拔高度的矮火绒草(Leontopodium nanum)叶片进行取样,采用常规石蜡制片技术和显微观察方法测定叶片外部形态、表皮气孔特征和解剖结构,探讨其叶片性状随海拔的变化,结果表明：（1）随海拔高度升高,叶面积呈减小的趋势,而比叶重和叶干物质含量增加;（2）叶片下表皮气孔密度随海拔升高呈先增加后下降的趋势,且气孔密度、气孔器面积、长度、宽度和潜在气孔导度指数等气孔特征之间存在显著相关性;（3）叶厚、栅栏组织和海绵组织厚度随海拔升高呈显著增厚的趋势;（4）叶片解剖结构可塑性和相关性分析显示,上、下角质层厚度的可塑性指数最大,而部分解剖结构指标间存在极显著的相关性。研究表明,矮火绒草为适应沿海拔上升温度降低的环境,主要采取叶片变小、变厚的对策,使植物趋于保温、保水和抗机械损伤的方向发展,并将资源最大化地投入到自身生长发育中。     

龙船花两变种叶面积回归方程的建立

以龙船花两变种橙红龙船花Ixora coccinea var. coccinea、邦德胡卡红仙丹草I. coccinea var. bandhuca的成熟叶为材料,利用WinFolia软件测定多项叶形态指标,并对叶面积进行回归分析,分别建立其8种回归方程以及总的适用回归方程。结果表明,龙船花两变种的叶片长×叶水平宽、叶周长、叶垂直长、叶片长、叶水平宽、叶片长×叶片长以及叶水平宽×叶水平宽与叶面积之间的相关系数及复相关系数均呈极显著水平(P＜0.01),可分别用来建立龙船花的叶面积回归方程;叶面积与叶片长×叶水平宽的相关系数及复相关系数最高,基于叶片长×叶水平宽的8种叶面积回归方程更好地估测两种龙船花的叶面积。经检验发现,二次函数、复合函数、幂函数能更准确地估测叶面积;由两种龙船花共同建立的3种总的回归方程中,复合函数与幂函数能更好地模拟估测叶面积。     

南亚热带常绿阔叶林4个树种对增温的生理生态适应能力比较

以红枝蒲桃(Syzygium rehderianum)、海南红豆(Ormosia pinnata)、红锥(Castanopsis hystrix)和木荷(Schima superba) 4种南亚热带常绿阔叶林典型树种为研究对象, 采用红外-箱式增温的方法, 研究4个树种叶片气孔性状(表征气孔调节能力)、叶片解剖结构(表征叶片组织调节能力)和光合特征(表征养分维持能力)对增温的响应情况, 比较不同树种在增温背景下的生理生态适应能力, 为预测该地区森林植物在全球变暖情形下的生长变化趋势提供理论依据。结果表明: 增温后, 红枝蒲桃叶片海绵组织厚度减小, 且光合氮利用效率(PNUE)和光合磷利用效率(PPUE)降低; 海南红豆气孔导度增大、气孔密度减小以及叶片厚度和栅栏组织厚度减小, 同时光合速率、PNUE和PPUE升高; 红锥气孔大小缩小, 但光合速率不变; 木荷气孔增大而密度减小, 栅栏组织厚度减小, 光合速率、PNUE和PPUE降低。综上所述, 红枝蒲桃、海南红豆和木荷能够通过降低叶片厚度来适应高温环境, 不同物种的气孔调节、养分维持、光合速率和光合养分利用效率对增温的响应存在差异。增温有利于固氮植物海南红豆的生长, 但不利于传统优势树种木荷和红枝蒲桃的生长。因此, 在未来气候变暖的情况下, 固氮植物海南红豆由于具有较强的适应能力, 在南亚热带常绿阔叶林中可能会取代木荷和红枝蒲桃等成为新的优势树种。     

落羽杉属(杉科)叶表皮结构及气孔参数

落羽杉属Taxodium Rich.现生3种植物——落羽杉T. distichum (L.) Rich.、池杉T. ascendens Brongn.和墨西哥落羽杉T. mucronatum Tenore.的条形叶为双面气孔型或单面气孔型。叶片远轴面气孔分布于中脉两侧,每侧各有4-8列气孔。叶片中部气孔数量稳定,顶部和基部气孔数量比中部略少。近轴面气孔在中脉两侧各有1-4行,有时仅少数几个气孔或没有气孔分布。非气孔分布区内,表皮细胞长方形,细胞壁直或稍微呈波状,细胞长轴与叶片长轴一致。气孔分布区内的表皮细胞有时为多边形。气孔器椭圆形,长轴与叶片长轴垂直或成一定的角度。保卫细胞壁加厚明显,极端联合形成极层结构。落羽杉属3种现生植物的气孔密度和气孔指数差异显著,不同采集地的落羽杉气孔密度和气孔指数差异不显著。这3种植物的气孔指数的变异系数均小于气孔密度的变异系数,用气孔指数指示大气CO2浓度比用气孔密度可靠。     

Water movement through Quercus rubra I. Leaf water potential and conductance during polycyclic growth

Two experiments examined simultaneous changes in leaf area (A_L), root length (L_r), stomatal conductance (g_s), leaf water potential (Ψ_L), transpiration and hydraulic plant conductance per unit leaf area (G) during the first three shoot cycles of northern red oak (Quercus rubra L.) grown under favourable and controlled conditions. Each shoot cycle consisted of bud swell, stem elongation, leaf expansion and rest; roots grew almost continuously. The g_s of all leaves decreased substantially while leaves of the newest flush were expanding and increased modestly when seedling leaf area remained constant. Overall, g_s decreased. The Ψ_L of mature leaves decreased during leaf expansion and increased by an equivalent amount during intervening periods. Possible explanations for the paired changes in g_s and Ψ_L are considered. Changes in G closely paralleled those of canopy g_s. These parallel changes during polycyclic seedling growth should act to keep seedling Ψ_L relatively constant as plant size increases and thereby help prevent Ψ_L from dropping to levels that would cause runaway embolism.     

Distinct controls of leaf widening and elongation by light and evaporative demand in maize

Leaf expansion depends on both carbon and water availabilities. In cereals, most of experimental effort has focused on leaf elongation, with essentially hydraulic effects. We have tested if evaporative demand and light could have distinct effects on leaf elongation and widening, and if short‐term effects could translate into final leaf dimensions. For that, we have monitored leaf widening and elongation in a field experiment with temporary shading, and in a platform experiment with 15 min temporal resolution and contrasting evaporative demands. Leaf widening showed a strong (positive) sensitivity to whole‐plant intercepted light and no response to evaporative demand. Leaf elongation was (negatively) sensitive to evaporative demand, without effect of intercepted light per se. We have successfully tested resulting equations to predict leaf length and width in an external dataset of 15 field and six platform experiments. These effects also applied to a panel of 251 maize hybrids. Leaf length and width presented quantitative trait loci (QTLs) whose allelic effects largely differed between both dimensions but were consistent in the field and the platform, with high QTL × Environment interaction. It is therefore worthwhile to identify the genetic and environmental controls of leaf width and leaf length for prediction of plant leaf area.     

Leaf area estimation in a sugar beet cultivar by linear models

An indirect method of leaf area measurement for Rizor sugar beet cultivar was tested. Leaves were sampled during two growing seasons in a Randomised Complete Block Design experiment. For 2002 samplings, leaf area [cm²] was linearly correlated with maximum leaf width [cm] using all leaf samples (r ² = 0.83, p < 0.001) or using the means of the 8 sampling occasions (r ² = 0.97, p < 0.001). Correlations between leaf area and leaf mid vein length [cm] were weaker (r ² = 0.75, p < 0.001 and r ² = 0.93, p < 0. 001, respectively). For 2003 samplings, the area estimated by the equations was highly correlated to the measured leaf area.     

Leaf shape and its relationship with Leaf Area Index in a sugar beet (<Emphasis Type="Italic">Beta vulgaris</Emphasis> L.) cultivar

Heteroblasty of sugar beet cultivar Rizor was studied under field conditions for three growing seasons (2003, 2005, 2006) in a Randomized Complete Block (RCB) design experiment. Eleven leaf samplings, from early June till the end of October, were conducted each year and leaf shape parameters [leaf area (LA), centroid X or Y (CX or CY), length (L), width (W), average radial (AR), elongation (EL), shape factor (SF)] were determined by an image analysis system. During samplings, Leaf Area Index (LAI) was measured non-destructively. Significant year and sampling effects were found for all traits determined. With the progress of the growing season, leaves became smaller (LA, L, W, and AR were decreased) and rounded. The largest leaves were sampled in 2006 when LAI was highest. LA was strongly correlated with L and W with simple functions (y = 0.1933 x^2.2238, r ² = 0.96, p<0.001, and y = 28.693 x − 192.33, r ² = 0.97, p< 0.001, respectively), which could be used for non-destructive LA determination. Also, LAI was significantly related with LA and leaf dimensions (L, W) suggesting that an easy, non-destructive determination of LAI under field conditions is feasible for sugar beet cv. Rizor. An erratum to this article is available at .     

Artificial neural networking to estimate the leaf area for invasive plant Wedelia trilobata

Leaf area are very important parameter for the understanding of growth and physiological responses of invasive plant species under different environmental factors. This study was conducted to build non-destructive leaf area model of Wedelia trilobata that were grown in greenhouse. Regression analysis and artificial neural network (ANN) approaches were used for the development of leaf area model with the help of leaf length and width of 262 plants samples. In selection of best method under both techniques, the lower value of mean absolute error (MAE), root mean square error (RMSE), mean absolute percentage error (MAPE) and higher value of R² were considered. According to the results it was found that ANN have higher value of (R² = 0.96) and lower value of error (MAE = 0.023, RMSE = 0.379, MAPE = 0.001) than regression analysis (R² = 0.94, MAE = 0.111, RMSE = 1.798, MAPE = 0.0005). It was concluded that error between predicted and actual value was less under ANN. Therefore, ANN model approach can be used as an alternating method for the estimation of leaf area. Through estimation of leaf area, invasive plant growth can predict under different environment conditions.     

Structural assessment of the impact of environmental constraints on Arabidopsis thaliana leaf growth: a 3D approach

Light and soil water content affect leaf surface area expansion through modifications in epidermal cell numbers and area, while effects on leaf thickness and mesophyll cell volumes are far less documented. Here, three-dimensional imaging was applied in a study of Arabidopsis thaliana leaf growth to determine leaf thickness and the cellular organization of mesophyll tissues under moderate soil water deficit and two cumulative light conditions. In contrast to surface area, thickness was highly conserved in response to water deficit under both low and high cumulative light regimes. Unlike epidermal and palisade mesophyll tissues, no reductions in cell number were observed in the spongy mesophyll; cells had rather changed in volume and shape. Furthermore, leaf features of a selection of genotypes affected in leaf functioning were analysed. The low-starch mutant pgm had very thick leaves because of unusually large palisade mesophyll cells, together with high levels of photosynthesis and stomatal conductance. By means of an open stomata mutant and a 9-cis-epoxycarotenoid dioxygenase overexpressor, it was shown that stomatal conductance does not necessarily have a major impact on leaf dimensions and cellular organization, pointing to additional mechanisms for the control of CO(2) diffusion under high and low stomatal conductance, respectively.     

Differences in leaf thermoregulation and water use strategies between three co‐occurring Atlantic forest tree species

Given anticipated climate changes, it is crucial to understand controls on leaf temperatures including variation between species in diverse ecosystems. In the first study of leaf energy balance in tropical montane forests, we observed current leaf temperature patterns on 3 tree species in the Atlantic forest, Brazil, over a 10‐day period and assessed whether and why patterns may vary among species. We found large leaf‐to‐air temperature differences (maximum 18.3 °C) and high leaf temperatures (over 35 °C) despite much lower air temperatures (maximum 22 °C). Leaf‐to‐air temperature differences were influenced strongly by radiation, whereas leaf temperatures were also influenced by air temperature. Leaf energy balance modelling informed by our measurements showed that observed differences in leaf temperature between 2 species were due to variation in leaf width and stomatal conductance. The results suggest a trade‐off between water use and leaf thermoregulation; Miconia cabussu has more conservative water use compared with Alchornea triplinervia due to lower transpiration under high vapour pressure deficit, with the consequence of higher leaf temperatures under thermal stress conditions. We highlight the importance of leaf functional traits for leaf thermoregulation and also note that the high radiation levels that occur in montane forests may exacerbate the threat from increasing air temperatures.     

27种木犀属植物叶表皮微形态特征的研究

利用光学显微镜和扫描电子显微镜观察了27种木犀属植物的叶表皮,测量并统计了气孔器类型、气孔大小、气孔密度、气孔指数及腺点密度等指标,以明确各种的叶表皮细胞形状及垂周壁式样、表皮角质膜、蜡质纹饰及气孔外拱盖的具体特征。结果显示:木犀属植物叶下表皮有气孔器,形状为圆形、椭圆形;气孔器类型多为不规则型,只有总状桂花和狭叶木犀为环列型;气孔器外围角质层有放射状、条状、环状、颗粒状等多种类型;叶表皮细胞形状有无规则形和多边形2种;下表皮腺点的数目远远大于上表皮。研究表明,木犀属植物气孔器和叶表皮细胞特征在种之间差异比较明显,可以作为种间鉴定的重要依据,具有重要的分类学意义。     

Interannual variations in needle and sapwood traits of Pinus edulis branches under an experimental drought

In the southwestern USA, recent large‐scale die‐offs of conifers raise the question of their resilience and mortality under droughts. To date, little is known about the interannual structural response to droughts. We hypothesized that piñon pines (Pinus edulis) respond to drought by reducing the drop of leaf water potential in branches from year to year through needle morphological adjustments. We tested our hypothesis using a 7‐year experiment in central New Mexico with three watering treatments (irrigated, normal, and rain exclusion). We analyzed how variation in “evaporative structure” (needle length, stomatal diameter, stomatal density, stomatal conductance) responded to watering treatment and interannual climate variability. We further analyzed annual functional adjustments by comparing yearly addition of needle area (LA) with yearly addition of sapwood area (SA) and distance to tip (d), defining the yearly ratios SA:LA and SA:LA/d. Needle length (l) increased with increasing winter and monsoon water supply, and showed more interannual variability when the soil was drier. Stomatal density increased with dryness, while stomatal diameter was reduced. As a result, anatomical maximal stomatal conductance was relatively invariant across treatments. SA:LA and SA:LA/d showed significant differences across treatments and contrary to our expectation were lower with reduced water input. Within average precipitation ranges, the response of these ratios to soil moisture was similar across treatments. However, when extreme soil drought was combined with high VPD, needle length, SA:LA and SA:LA/d became highly nonlinear, emphasizing the existence of a response threshold of combined high VPD and dry soil conditions. In new branch tissues, the response of annual functional ratios to water stress was immediate (same year) and does not attempt to reduce the drop of water potential. We suggest that unfavorable evaporative structural response to drought is compensated by dynamic stomatal control to maximize photosynthesis rates.