A simple method for genotyping the bovine growth hormone gene

An allele-specific polymerase chain reaction (PCR) amplification method was developed to determine the genotypes at the bovine growth hormone locus that result from two nucleotide substitutions in exon 5 of the gene. This method was a multiplex PCR (ASM–PCR) employing a common primer pair and two allele-specific reverse primers. The common primer pair was designed to amplify a target region containing two substitution points from the three variants of the bovine growth hormone gene. The allele-specific primers were designed to be mismatched with other genotypes at the 3' end of oligonucleotides. When the common and allele-specific reverse primers competed with each other, the shorter allele-specific fragments were amplified preferentially. Consequently, the PCR products of the variant-specific fragments were 347, 483 and 656 bp for alleles A, B and C, respectively, of the bovine growth hormone gene. Genotypes of the bovine growth hormone gene were easily identified by agarose gel electrophoresis of PCR products. The results suggested that this multiplex PCR method would be useful for identification of genetic variants caused by point mutations.     

PCR Detection of Cyclic Lipodepsinonapeptide-Producing Pseudomonas syringae pv. syringae and Similarity of Strains

Many strains of Pseudomonas syringae pv. syringae produce one of four classes of small cyclic lipodepsinonapeptides: syringomycins, syringostatins, syringotoxins, or pseudomycins. These metabolites are phytotoxic and growth inhibitory against a broad spectrum of fungi. Their production is dependent upon the expression of conserved biosynthesis and export genes syrB and syrD, respectively. PCR and oligonucleotide primers specific for a 752-bp fragment of syrB were used to identify cyclic lipodepsinonapeptide-producing strains of P. syringae pv. syringae. In contrast, PCR amplification with primers based on syrD did not always correlate with possession of the syrD gene, as indicated by Southern blot analysis, or with cyclic lipodepsinonapeptide production. Sequence comparisons of 400 nucleotides from the syrB PCR-amplified fragments showed 94% plot similarity among 27 strains. In a sequence phenogram, syringostatin and syringotoxin producers were grouped apart from syringomycin-producing strain B301D, with sequences that differed by eight and nine conserved base substitutions, respectively. PCR amplification of the 752-bp syrB fragment offers rapid and accurate detection of cyclic lipodepsinonapeptide-producing strains, and its sequence provides some predictive capabilities for identifying syringotoxin and syringostatin producers.     

Detection of enterotoxigenic Clostridium perfringens in food and fecal samples with a duplex PCR and the slide latex agglutination test.

A duplex PCR procedure was evaluated for the detection of Clostridium perfringens in food and biological samples and for the identification of enterotoxigenic strains. This method uses two sets of primers which amplify in the same reaction two different DNA fragments simultaneously: the 283-bp C. perfringens phospholipase C gene fragment and the 426-bp enterotoxin gene fragment. Internal primers within the two primer sets confirmed the specificity of the method by DNA-DNA hybridization with the PCR products. No cross-reaction was observed with other Clostridium species or with other bacteria routinely found in food. The detection level was approximately 10(5) C. perfringens cells per g of stool or food sample. When overnight enrichment culture was used, 10 C. perfringens cells per g was detected in 57 artificially contaminated food samples. The duplex PCR is a rapid, sensitive, and reliable method for the detection and identification of enterotoxigenic C. perfringens strains in food samples. A slide latex agglutination test was also evaluated as a rapid, simple technique for the detection of C. perfringens enterotoxin in stool samples.     

一种基于适配器连接介导的等位基因特异性扩增法测定多重SNP

建立了一种基于DNA适配器连接介导的等位基因特异性扩增法测定多重SNP。以CYP2D6基因中的5个SNP位点（100C>T,1661G>C,1758G>T,2470T>C和2850C>T）为例,用PCR法预扩增得一段含所有待测SNP位点的长片段,然后用限制性内切酶将其消化成短片段,在连接酶的作用下与设计的DNA适配器（adapter）相连;该适配器的一端与限制性内切酶降解后留下的粘性末端相同,另一端带有一段公共序列。在两管中加入与适配器连接的片段作为PCR扩增模板,并分别加入SNP特异性引物和一种适配器特异性的通用引物进行PCR扩增,最后用凝胶电泳法分离PCR扩增产物。由于每管与SNP的两种特异性引物中的一种对应,可以根据每管中扩增片段的大小判断SNP的类型。通过凝胶电泳法可以一次分离与5种SNP类型相对应的引物特异性延伸反应产物;采用该法成功测定了20名健康中国人的CYP2D6基因中5个SNP位点的基因多态性,与限制性片段长度多态性法（RFLP）测定结果完全一致。该方法采用n+1种引物（n种SNP特异性引物和一种通用引物）进行n重PCR反应,极大提高了PCR反应的特异性,结果准确,可用于同时测定多个SNP位点。

     

Gender determination in single bovine blastomeres by polymerase chain reaction amplification of sex-specific polymorphic fragments in the amelogenin gene.

A sensitive technique for the sexing of bovine embryos was developed using polymerase chain reaction (PCR) amplification of the bovine amelogenin (bAML) gene on the X- and Y-chromosomes of Holstein dairy cattle. Cloning and DNA sequencing showed a 45.1% homology between the fifth intron of the bAML-X and bAML-Y gene with multiple deletions. A pair of sex-specific primers was designed to allow amplification of a single fragment of 467-bp from the X-chromosome of female cattle and two fragments of 467-bp and 341-bp from the X- and Y-chromosomes of male cattle. The primers were successfully applied to bovine sexing from single blastomeres isolated from day-6 to day-7 cow embryos by direct cell lysis and PCR. Our protocol of embryo sexing should be applicable to the diagnosis of defective genes in vitro in human embryos and in other domestic or recreational animals.     

一种单核苷酸多态性的单倍型分析技术

运用多步PCR和测序技术,完成基因组中相距较远的单核苷酸多态位点的单倍型构建。通过设计2条等位基因特异性引物,扩增大片段DNA(10kb左右),以此大片段DNA作为下一轮PCR反应的模板,再在该片段中设计待检测区域的PCR引物,进行第2轮PCR。对PCR产物进行测序分析,确定其多态位点处的等位基因。结合第1轮PCR中的等位基因特异性引物,即可确定该大片段DNA中不同单核苷酸多态性构成的单倍型。以脂蛋白脂酶基因为例,应用其启动子区以及第4外显子区的等位基因特异性引物扩增约16kb的DNA片段,然后检测位于该片段中第2、3外显子的多态性。在￡-尸￡-基因第2内含子中发现了 13557G→A多态性。经分析确定出-421G／ 13557G／ 15222A、-421A／ 13557G／ 15222A、-421G／ 13557G／ 15222G、-421G／ 13557A／ 15222A等4种单倍型。等位基因特异性PCR结合小片段测序是一种快捷高效的对相距较远的多个SNP进行单倍型构建的新策略。     

PCR amplification on a microarray of gel-immobilized oligonucleotides: detection of bacterial toxin- and drug-resistant genes and their mutations

PCR amplification on a microarray of gel-immobilized primers (microchip) has been developed. One of a pair of PCR primers was immobilized inside a separate microchip polyacrylamide porous gel pad of 0.1 x 0.1 x 0.02 (or 0.04) micron in size and 0.2 (or 0.4) nL in volume. The amplification was carried out simultaneously both in solution covering the microchip array and inside gel pads. Each gel pad contained the immobilized forward primers, while the fluorescently labeled reverse primers, as well as all components of the amplification reaction, diffused into the gel pads from the solution. To increase the amplification efficiency, the forward primers were also added into the solution. The kinetics of amplification was measured in real time in parallel for all gel pads with a fluorescent microscope equipped with a charge-coupled device (CCD) camera. The accuracy of the amplification was assessed by using the melting curves obtained for the duplexes formed by the labeled amplification product and the gel-immobilized primers during the amplification process; alternatively, the duplexes were produced by hybridization of the extended immobilized primers with labeled oligonucleotide probes. The on-chip amplification was applied to detect the anthrax toxin genes and the plasmid-borne beta-lactamase gene responsible for bacterial ampicillin resistance. The allele-specific type of PCR amplification was used to identify the Shiga toxin gene and discriminate it from the Shiga-like one. The genomic mutations responsible for rifampicin resistance of the Mycobacterium tuberculosis strains were detected by the same type of PCR amplification of the rpoB gene fragment isolated from sputum of tuberculosis patients. The on-chip PCR amplification has been shown to be a rapid, inexpensive and powerful tool to test genes responsible for bacterial toxin production and drug resistance, as well as to reveal point nucleotide mutations.     

Structure of a naturally occurring plasmid with genes for enterotoxin production and drug resistance.

A physical map of the 117-kilobase conjugative plasmid pCG86 was constructed using electron microscope heteroduplex analysis. This plasmid carries the genes elt, for heat-labile enterotoxin, and estA, for heat-stable enterotoxin, as well as the genes for resistance to tetracycline, streptomycin, sulfonamides, and mercury. These genes were mapped using deletions and Tn5 insertions as physical markers. Analysis of a heteroduplex between pCG86 and a previously described enterotoxin plasmid (EntP307) showed a 48-kilobase region of complete homology which included the genes elt and estA. An 8.8-kilobase BamHI fragment of EntP307 carrying elt, cloned by others, was also shown to be completely homologous with pCG86. The position of elt on the fragment was verified, and it was shown to carry estA as well. A 44-kilobase region of pCG86 showed partial homology with the region of EntP307 previously shown to contain conjugal transfer genes. The gene for tetracycline resistance is carried on a stem-loop structure with the dimensions of Tn10, and the genes for the other drug resistance markers are carried on a 14.6-kilobase segment that forms an insertion loop in heteroduplexes with EntP307. These studies suggest that pCG86 arose either by recombination between an enterotoxin plasmid of incompatibility group FI, like EntP307, and a multiple resistance factor of incompatibility group FII, or by transposition into EntP307 of two transposons.     

Detection of cariogenic bacterial genes by microchip electrophoresis

Allele-specific PCR primers were designed, based on the dextranase (dex) gene, to identify Streptococcus mutans and Streptococcus sobrinus in dental plaque; subsequently, PCR products were detected via microchip electrophoresis (ME). In order to amplify the dex gene fragment of S. mutans and S. sobrinus, the following two PCR methods were established. Duplex allele-specific PCR primers were designed on a region of low DNA homology; furthermore, 211 and 126-bp fragments were amplified for S. mutans and S. sobrinus, respectively. Common PCR primer for single allele-specific PCR was designed so as to sandwich a region exhibiting high homology and amplify PCR product of different DNA size due to deletion of small DNA fragment in two dex genes. S. mutans and S. sobrinus were amplified, leading to the generation of 202 and 226-bp products, respectively. Analysis of DNA base size by ME in order to achieve efficient separation employed a polymer mixture consisting of hydroxypropyl methylcellulose (HPMC) and polyethylene oxide (PEO). In the presence of a polymer mixture of 0.125% PEO/0.6% HPMC, two PCR products were obtained, displaying degree of separation of 226 bp/202 bp of 2.67 (Rs). Reproducibility (CV%, n = 7) was 0.3%; additionally, separation time was approximately 85 s. This method was applied to the detection of S. mutans and S. sobrinus in dental plaque. Detection of the dex genes of S. mutans and S. sobrinus characterized by quickness, precision and high sensitivity was possible.     

Synthetic oligodeoxyribonucleotide probes for detecting heat-stable enterotoxin-producing Escherichia coli by DNA colony hybridization

DNA colony hybridization was used to identify and enumerate enterotoxigenic Escherichia coli strains in foods. The cells were identified and enumerated by using synthetic polynucleotide probes for the heat-stable enterotoxin genes. These 22-base oligonucleotides, made from known nucleotide sequences of the genes for the heat-stable enterotoxins of human and porcine strains of E. coli, contain two mismatches between the two heat-stable enterotoxins. Colonies were replicated from agar medium onto paper filters and lysed with alkali followed by steam; probes were end labeled. After overnight hybridization at 40 degrees C and washing at 50 degrees C, autoradiograms were exposed at -70 degrees C. Results were consistent with suckling-mouse tests for heat-stable enterotoxins. A stronger signal was obtained on paper filters than on nitrocellulose filters. Enterotoxigenic E. coli cells were detected when mixed with a 1,000-fold excess of nonenterotoxigenic E. coli cells. This procedure appears to be more acceptable for routine testing than the use of cloned DNA fragments, labeling by nick translation, and lysing colonies on nitrocellulose filters.     

PCR amplification of the fimA gene sequence of Salmonella typhimurium, a specific method for detection of Salmonella spp.

The goal of this study was to evaluate the suitability of the fimA gene amplification by PCR as a specific method for detection of Salmonella strains. Salmonella typhimurium and other pathogenic members of the family Enterobacteriaceae produce morphologically and antigenically related, thin, aggregative, type 1 fimbriae. A single gene, fimA, encodes the major fimbrial unit. In order to obtain higher specificity, we have selected a series of primers internal to the fimA gene sequence and have developed a PCR method for detecting Salmonella strains. A collection of 376 strains of Salmonella comprising over 80 serovars, isolated from animals and humans in Canada, have been used to evaluate this PCR method. Forty non-Salmonella strains were also tested by the same procedure. Cultures were screened by inoculating a single colony of bacteria directly into a PCR mixture containing a pair of primers specific for the fimA gene. The specific PCR product is an 85-bp fragment which was visualized by polyacrylamide gel electrophoresis and ethidium bromide staining. All Salmonella strains gave positive results by the PCR. Feed and milk samples contaminated by Salmonella strains were also detected by this procedure. The detection of all Salmonella strains tested and the failure to amplify the fragment from non-Salmonella strains confirm that the fimA gene contains sequences unique to Salmonella strains and demonstrate that this gene is a suitable PCR target for detection of Salmonella strains in food samples.     

Synthetic oligodeoxyribonucleotide probes for detecting heat-stable enterotoxin-producing Escherichia coli by DNA colony hybridization.

DNA colony hybridization was used to identify and enumerate enterotoxigenic Escherichia coli strains in foods. The cells were identified and enumerated by using synthetic polynucleotide probes for the heat-stable enterotoxin genes. These 22-base oligonucleotides, made from known nucleotide sequences of the genes for the heat-stable enterotoxins of human and porcine strains of E. coli, contain two mismatches between the two heat-stable enterotoxins. Colonies were replicated from agar medium onto paper filters and lysed with alkali followed by steam; probes were end labeled. After overnight hybridization at 40 degrees C and washing at 50 degrees C, autoradiograms were exposed at -70 degrees C. Results were consistent with suckling-mouse tests for heat-stable enterotoxins. A stronger signal was obtained on paper filters than on nitrocellulose filters. Enterotoxigenic E. coli cells were detected when mixed with a 1,000-fold excess of nonenterotoxigenic E. coli cells. This procedure appears to be more acceptable for routine testing than the use of cloned DNA fragments, labeling by nick translation, and lysing colonies on nitrocellulose filters.     

Detection and identification of E. coli producing heat-labile enterotoxin type I by enzymatic amplification of a specific DNA fragment

The polymerase chain reaction (PCR) was used to identify strains of Escherichia coli which produce heat-labile toxin type I (LTI). Amplification primers were designed to detect E. coli strains of human as well as porcine origin. This assay was used to test the ATCC 37218 strain, which carries a recombinant plasmid with the genetic information for production of porcine LTI (pLTI). In addition, three clinical E. coli isolates of human and one of porcine origin were tested. All clinical isolates were reported to produce heat-labile enterotoxin (hLTI and pLTI, respectively) when tested by the Y1 adrenal cell method and/or by the CHO cell method. All strains yielded the expected 275 bp DNA fragment after enzymatic amplification. This fragment was further identified by allele specific oligonucleotide hybridization. Alternatively, the fragment was identified by a SmaI restriction enzyme site which is present in the genes of both the E. coli isolated from humans and pigs. The detection limit determined in water with the ATCC 37218 strain was 20 bacteria. The amplified sequence included a CfoI polymorphism which allowed to distinguish between the genes coding for pLTI and hLTI. All of the strains tested showed this polymorphism as expected. Depending on the identification method chosen, SmaI digestion or oligonucleotide hybridization, pure water can be analysed within 8 h or 12 h, respectively. This method may be adapted to environmental and food samples.     

Molecular standardization of mating type terminology in the Gibberella fujikuroi species complex.

Mating type in the Gibberella fujikuroi species complex is controlled by a single locus with two alleles and is usually identified following sexual crosses with standard, female-fertile tester isolates. The mating type alleles have been arbitrarily designated "+" and "-" within each biological species, and the nomenclature is tied to the standard tester strains. We developed a pair of PCR primers that can be used to amplify a unique fragment of one of the mating type alleles (MAT-2) from at least seven of the biological species in this species complex. Based on the amplification pattern, we propose a replacement for the existing, arbitrary +/- terminology that is presently in use. The new terminology is based on DNA sequence similarities between the mating type allele fragments from the biological species of the G. fujikuroi species complex and the corresponding fragments from other filamentous ascomycetes.     

Isolation of a specific DNA fragment and development of a PCR-based method for the detection of Mycobacterium genavense

The rise of Mycobacterium genavense infections is making identification ever more important for diagnosis and treatment. Moreover, isolation and identification of M. genavense are made difficult by the lack of growth on solid media and by its low generation rate in BACTEC liquid media. Thus, amplification by PCR or similar techniques represents the only possibility of detecting and identifying M. genavense from tissue samples. In order to set up a simple and species-specific method based on the use of PCR and non-radioactive hybridization technique, we decided to search for and clone a specific DNA fragment of this bacterial species. In the present study, a 1734-bp fragment was isolated. This fragment was found to be highly specific for M. genavense strains. A species-specific pair of primers (MG22 and MG23) and two oligonucleotide probes (MG18 and MG19) were selected. They were successfully used to amplify and detect a 155-bp DNA fragment from the 13 available strains of M. genavense which were isolated from clinical specimens or from birds. Conversely, the primers and probes did not hybridize with DNA from any of the 20 other mycobacterial species tested. It is worth noting that the chosen primers and probes did not hybridize with DNA of M. simiae, although it is closely related to M. genavense. The present PCR technique uses species-specific primers for M. genavense. Followed by a non-radioactive hybridization technique on microplates it is able to distinguish M. genavense from other mycobacteria in one step, without sequencing or restriction analysis. On the basis of the Southern blot hybridization, PCR and sandwich hybridization results, we concluded that the isolated 1.7-kb sequence was specific for the M. genavense chromosome. The method developed here for M. genavense identification uses a simple methodology and commonly available reagents. Furthermore it can be easily automated.     

Sex identification of northern ungulates using low quality and quantity DNA

We evaluated PCR primer sets to determine the most effective technique for identifying sex of northern ungulates. We sought markers that required only a single pair of primers to amplify both X- and Y-linked alleles; that amplified X- and Y-linked products that were easily distinguishable using agarose gel electrophoresis; and that produced short amplicons amenable to amplification using DNA of poor quality and low quantity, as is often found in non-invasively collected samples such as feces. Primer pairs KY1/KY2 and SE47/SE48, which amplify X- and Y-specific alleles of the amelogenin gene, met our criteria and were tested for moose (Alces alces), mountain goat (Oreamnos americanus), Sitka black-tailed deer (Odocoileus hemionus sitkensis), and caribou (Rangifer tarandus). KY primers amplified shorter PCR products than did SE primers; moreover, SE primers inconsistently amplified certain Y-chromosome products, creating potential for misidentification of sex. DNA fragments amplified using KY primers were sequenced for each species, allowing us to characterize a 45-bp deletion for Y-linked alleles (136-bp product) relative to X-linked alleles (181-bp product) in all species and a 9-bp deletion in the X-linked allele of moose relative to other species. This is the first sex-determination technique using PCR reported for several ungulate species of Alaska. Although other protocols exist for cervids and bovids, this is the first report of markers meeting the aforementioned criteria for Odocoileus, the most abundant and intensively managed genus of large mammals in North America.     

Rapid and sensitive method for detection of Shiga-like toxin-producing Escherichia coli in ground beef using the polymerase chain reaction.

A rapid and sensitive method for detection of Shiga-like toxin (SLT)-producing Escherichia coli (SLT-EC) with the polymerase chain reaction (PCR) is described. Two pairs of oligonucleotide primers homologous to SLTI and SLTII genes, respectively, were used in multiplex PCR assays. The first pair generated a ca. 600-bp PCR product with DNA from all SLTI-producing E. coli tested but not from E. coli strains that produce SLTII or variants of SLTII. The second pair generated a ca. 800-bp PCR product with DNA from E. coli strains that produce SLTII or variants of SLTII but not from SLTI-producing E. coli. When used in combination, the SLTI and SLTII oligonucleotide primers amplified DNA from all of the SLT-EC tested. No PCR products were obtained with SLT primers with DNA from 28 E. coli strains that do not produce SLT or 44 strains of 28 other bacterial species. When ground beef samples were inoculated with SLT-EC strains 319 (O157:H7; SLTI and SLTII), H30 (O26:H11; SLTI), and B2F1/3 (O91:H21; SLTII variants VT2ha and VT2hb) and cultured in modified Trypticase soy broth for 6 h at 42 degrees C, an initial sample inoculum of as few as 1 CFU of these SLT-EC strains per g could be detected in PCR assays with DNA extracted from the broth cultures.     

Rapid and sensitive method for detection of Shiga-like toxin-producing Escherichia coli in ground beef using the polymerase chain reaction.

A rapid and sensitive method for detection of Shiga-like toxin (SLT)-producing Escherichia coli (SLT-EC) with the polymerase chain reaction (PCR) is described. Two pairs of oligonucleotide primers homologous to SLTI and SLTII genes, respectively, were used in multiplex PCR assays. The first pair generated a ca. 600-bp PCR product with DNA from all SLTI-producing E. coli tested but not from E. coli strains that produce SLTII or variants of SLTII. The second pair generated a ca. 800-bp PCR product with DNA from E. coli strains that produce SLTII or variants of SLTII but not from SLTI-producing E. coli. When used in combination, the SLTI and SLTII oligonucleotide primers amplified DNA from all of the SLT-EC tested. No PCR products were obtained with SLT primers with DNA from 28 E. coli strains that do not produce SLT or 44 strains of 28 other bacterial species. When ground beef samples were inoculated with SLT-EC strains 319 (O157:H7; SLTI and SLTII), H30 (O26:H11; SLTI), and B2F1/3 (O91:H21; SLTII variants VT2ha and VT2hb) and cultured in modified Trypticase soy broth for 6 h at 42 degrees C, an initial sample inoculum of as few as 1 CFU of these SLT-EC strains per g could be detected in PCR assays with DNA extracted from the broth cultures.     

Identification of fast and slow growing rhizobia nodulating soybean (Glycine max [L.] Merr) by a multiplex PCR reaction

Two DNA fragments, a 730-bp and a 900-bp fragment, one homologous to host cultivar specificity genes nolBT of Sinorhizobium fredii and the other one homologous to RSalpha, an insertion-like sequence present in Bradyrhizobium japonicum, were generated by polymerase chain reaction (PCR) with two pairs of primers. The amount of each fragment generated by the multiplex PCR was proportional to the amount of template DNA present. The amplification of the 900-bp RSalpha fragment was more sensitive, since it was amplified from a smaller amount of template DNA than the 730-bp nolBT fragment. By running the multiplex reaction in the presence of template DNA isolated from different sources, we confirmed that the reaction can discriminate between S. fredii, Bradyrhizobium japonicum and Sinorhizobium xinjiangensis.