Synthesis and characterization of pH-sensitive hydrogel composed of carboxymethyl chitosan for colon targeted delivery of ornidazole

In the present study, carboxymethyl chitosan was prepared from chitosan, crosslinked with glutaraldehyde and evaluated in vitro as a potential carrier for colon targeted drug delivery of ornidazole. Ornidazole was incorporated at the time of crosslinking of carboxymethyl chitosan. The chitosan was evaluated for its degree of deacetylation (DD) and average molecular weight; which were found to be 84.6% and 3.5×10(4) Da, respectively. The degree of substitution on prepared carboxymethyl chitosan was found to be 0.68. All hydrogel formulations showed more than 85% and 74% yield and drug loading, respectively. The swelling behaviour of prepared hydrogels checked in different pH values, 1.2, 6.8 and 7.4, indicated pH responsive swelling characteristic with very less swelling at pH 1.2 and quick swelling at pH 6.8 followed by linear swelling at pH 7.4 with slight increase. In vitro release profile was carried out at the same conditions as in swelling and drug release was found to be dependant on swelling of hydrogels and showed biphasic release pattern with non-fickian diffusion kinetics at higher pH. The carboxymethylation of chitosan, entrapment of drug and its interaction in prepared hydrogels were checked by FTIR, (1)H NMR, DSC and p-XRD studies, which confirmed formation of carboxymethyl chitosan from chitosan and absence of any significant chemical change in ornidazole after being entrapped in crosslinked hydrogel formulations. The surface morphology of formulation S6 checked before and after dissolution, revealed open channel like pores formation after dissolution.     

Design,Optimization, and Evaluation of a Novel Metronidazole-Loaded Gastro-Retentive pH-Sensitive Hydrogel

Floating pH-sensitive chitosan hydrogels containing metronidazole were developed for the eradication of Helicobacter pylori from the stomach. Hydrogels were prepared by crosslinking medium or high molecular weight chitosan in lyophilized solutions containing metronidazole using either citrate or tripolyphosphate (TPP) salts at 1% or 2% concentration. A 2³ factorial design was developed to study the influence of formulation parameters on the physical characteristics of the prepared hydrogels. The interaction between hydrogel components was investigated. The morphology of the prepared hydrogels was inspected and their percentage swelling, release pattern, and moisture content were evaluated. The results revealed the absence of interaction between hydrogel components and their highly porous structure. Percentage swelling of the hydrogels was much higher, and drug release was faster in gastric pH compared with intestinal pH. The formula prepared using 2% high molecular weight chitosan and 2% TPP significantly swelled (700%) within the first 4 h and released the loaded drug over a period of 24 h. Its moisture content was not affected by storage at high relative humidity. Therefore, this formula was selected to be tested in dogs for its gastric retention (using X-ray radiography) and efficacy in the eradication of H. pylori (using histopathological and microbiological examination). The results revealed that the prepared hydrogel formula was retained in dog stomach for at least 48 h, and it was more effective against H. pylori than the commercially available oral metronidazole tablets (Flagyl®).     

Synthesis and characterization of thermo-sensitive semi-IPN hydrogels based on poly(ethylene glycol)-co-poly(ε-caprolactone) macromer, N-isopropylacrylamide, and sodium alginate

Thermo-sensitive semi-IPN hydrogels were prepared via in situ copolymerization of N-isopropylacrylamide (NIPAAm) with poly(ethylene glycol)-co-poly(ε-caprolactone) (PEG-co-PCL) macromer in the presence of sodium alginate by UV irradiation technology. The effects of the sodium alginate content, temperature, and salt on the swelling behavior of the as-obtained hydrogels were studied. The results showed that the swelling ratio of the hydrogels increased with the increasing sodium alginate content at the same temperature, and decreased with the increase in temperature. The salt sensitivity of the semi-IPN hydrogels was dependent on the content of sodium alginate introduced in the hydrogels. The mechanical rheology of the hydrogels and in vitro release behavior of bovine serum albumin (BSA) in situ encapsulated within the hydrogels were also investigated. It was found that the introduction of sodium alginate with semi-IPN structure improved mechanical strength of the hydrogels and the cumulative release percentage of BSA from the hydrogels. Such double-sensitive semi-IPN hydrogel materials could be exploited as potential candidates for drug delivery carriers.     

Synthesis and characterization of hydrogels based on grafted chitosan for the controlled drug release

Temperature and pH-responsive hydrogels based on chitosan grafted with poly acrylic acid (PAAc), poly hydroxy propyl methacrylate (PHPMA), poly (vinyl alcohol) (PVA) and gelatin were prepared for controlled drug delivery. These stimuli-responsive hydrogels were synthesized by gamma irradiation technique. The degree of gelation was over 90% and increased as chitosan, AAc and PVA content increased, while the degree of gelation decrease with the increase of gelatin content. The equilibrium swelling studies of hydrogels prepared in various conditions were carried out in an aqueous solution, and the pH sensitivity in the range of 2–9 was investigated. An increase of swelling degree with an increase in the pH was noticed and showed the highest value at pH 9. Also antibiotic drug Oxttetracycline was loaded into the hydrogels and the release studies were carried out at different pH and temperature. The in vitro release profiles of the drug showed that, the release of the drug increased as the time, temperature and pH increased and reached to maximum after 48 h at pH 9. The prepared hydrogels were characterized by using SEM, FTIR, and DSC.     

The study of gelation kinetics and chain-relaxation properties of glutaraldehyde-cross-linked chitosan gel and their effects on microspheres preparation and drug release

The effects of gelation kinetics and chain-relaxation properties of glutaraldehyde-cross-linked chitosan gel on microspheres preparation or drug release were studied. The rate of gelation is zero order corresponding to the chitosan concentration but non-zero order corresponding to the glutaraldehyde concentration. It was suggested that the cross-linking reaction was mainly dominated by the concentration of small molecule reactant, glutaraldehyde. The relaxation of an entangled polymer chain in a gel network as a result of the swelling of cross-linked chitosan hydrogel was investigated by the stress–strain determination. The higher the cross-linking density of chitosan hydrogel, the lower the swelling ability of chitosan hydrogel due to the slower relaxation rate of polymer chain, which then results in the decreased drug-release rate.     

High-efficient and synergetic antibacterial nanocomposite hydrogel with quaternized chitosan/Ag nanoparticles prepared by one-pot UV photochemical synthesis

Hydrogel dressings have significant advantages such as absorption of tissue exudate, maintenance of proper moist environment, and promotion of cell proliferation. However, facile preparation method and high-efficient antibacterial hydrogel dressings are still a great challenge. In this study, a facile approach to prepare antibacterial nanocomposite hydrogel dressing to accelerate healing was explored. The hydrogels consisted of quaternized chitosan and chemically cross-linked polyacrylamide, as well as silver nanoparticles (AgNPs) stabilized by chitosan. The synthesis of the hydrogels including the formation of AgNPs and polymerization of acrylamide was accomplished simultaneously under UV irradiation in 1 hour without adding initiator. The hydrogels showed favorable tensile strength of ∼100 kPa with elongation at break over 1000% and shear modulus of ∼10⁴ Pa as well as suitable swelling ratio, which were appropriate for wound dressing. The combination of quaternized chitosan and AgNPs exhibited high-efficient and synergetic antibacterial performance with low cytotoxicity. In vivo animal experiments showed that the hydrogel can effectively prevent wound infection and promote wound healing. This study provides a facile method to produce antibacterial hydrogel wound dressing materials.     

Physicochemical and structural characterization of a polyionic matrix of interest in biotechnology, in the pharmaceutical and biomedical fields

This paper reports on the swelling degree and the rheological and structural characteristics of a hydrogel composed by chitosan and xanthan. The latter is a polyionic hydrogel obtained by complexation between the both polysaccharides. The swelling degree has been found to be influenced by the time of coacervation, the pH of the solution of chitosan used to form the hydrogel and the pH of the swelling solution. The molecular weight and the degree of acetylation of the chitosan also influence the swelling degree of this matrix. The connectivity between chitosan and xanthan affects the swelling degree of this matrix. A rheological study has been carried out in order to understand the formation of the coacervate and of the subsequent hydrogel. The evolution of the storage modulus with time during the coacervation has allowed to optimize the time of coacervation required for a subsequently hydrogel, with desirable swelling degree. The kinetics has shown that (a) the coacervate is formed in two distinct steps and (b) the storage modulus of the hydrogel reaches a stable plateau. The values of the storage modulus have been correlated with the swelling degree. The microscopic characterization has shown the presence of a porous network with a fibrillar structure. To complete the characterization studies fine powder of this hydrogel has been used to determine the surface, perimeter, Feret diameter and sphericity factor distribution of dry and hydrated (swollen) particles.     

A material decoy of biological media based on chitosan physical hydrogels: application to cartilage tissue engineering

The cartilage tissue has a limited self-regenerative capacity. Tissue-engineering represents a promising trend for cartilage repair. The present study was aimed to develop a biomaterial formulation by combining fragments of chitosan hydrogel with isolated rabbit or human chondrocytes. We first reported the properties of the constructs elaborated with rabbit chondrocytes and pure chitosan physical hydrogels with defined molecular weight, acetylation degree and polymer concentration. Morphological data showed that chondrocytes were not penetrating the hydrogels but tightly bound to the surface of the fragments and spontaneously formed aggregates of combined cell/chitosan. A significant amount of neo-formed cartilage-like extracellular matrix (ECM) was first accumulated in-between cells and hydrogel fragments and furthermore was widely distributed within the neo-construct. The optimal biological response was obtained with hydrogel fragments concentrated at 1.5% (w/w) of polymer made from a chitosan with a degree of acetylation between 30 and 40%. Such hydrogels were then mixed with human chondrocytes. The phenotype of the cells was analyzed by using chondrocytic (mRNA expression of mature type II collagen and aggrecan as well as secretion of proteoglycans of high molecular weight) and non chondrocytic (mRNA expression of immature type II collagen and type I collagen) molecular markers. As compared with human chondrocytes cultured without chitosan hydrogel which rapidly dedifferentiated in primary culture, cells mixed with chitosan rapidly loose the expression of type I and immature type II collagen while they expressed mature type II collagen and aggrecan. In these conditions, chondrocytes maintained their phenotype for as long as 45 days, thus forming cartilage-like nodules. Taken together, these data suggest that a chitosan hydrogel does not work as a scaffold, but could be considered as a decoy of cartilage ECM components, thus favoring the binding of chondrocytes to chitosan. Such a biological response could be described by the concept of reverse encapsulation.     

Growth and viability of mycelial fragments of white-rot fungi on some hydrogels

The viability of mycelial fragments of Trametes versicolor and Irpex lacteus and their growth on selected hydrogels are described. The size of mycelial fragments of the fungi did not significantly influence their viability. Alginate hydrogel films supported fungal growth better than agarose, carrageenan, chitosan and gelatin films, and had the highest mechanical strength but were less hydrophilic than the other hydrogels. All commercial alginates that were tested supported aseptic growth of fungal fragments without prior sterilization of the hydrogel solution. The viability of mycelial fragments in the hydrogel solutions was higher for some commercial alginates than that in laboratory grade alginate. The mechanical strength and hydrophilicity of hydrogels from alginate type Sobalg FD 155 and Meer HV were comparable to that of laboratory grade alginate. Sterilization and pH of the alginate hydrogel did not significantly influence the growth of T. versicolor mycelial fragments but affected the growth of I. lacteus. Concentrations of alginate in the range of 1–2% in the hydrogel did not affect the growth of entrapped mycelial fragments of these fungi. Received 25 June 1997/ Accepted in revised form 07 March 1998     

Kinetics and mechanisms of depolymerization of alginate and chitosan in aqueous solution

The kinetics and mechanisms of depolymerization of aqueous chitosan and alginate solutions at elevated temperatures have been investigated. Chitosan salts of different degree of acetylation (F_A), type of counterions (-glutamate, -chloride) and degree of purity were studied. One commercially available highly purified sodium alginate sample with high content of guluronic acid (G) was also studied. Furthermore, the influence of oxygen, H⁺ and OH⁻ ions on the initial depolymerization rates was investigated. Depolymerization kinetics was followed by measuring the time courses of the apparent viscosity and the intrinsic viscosity. The initial rate constants for depolymerization were determined from the intrinsic viscosity data converted to a quantity proportional to the fraction of bonds broken. The activation energies of the chitosan chloride and chitosan glutamate solutions with pH close to 5 and the same degree of acetylation, F_A = 0.14, were determined from the initial rate constants to be 76 ± 13 kJ/mol and 80 ± 11 kJ/mol, respectively.The results reported herein suggest that the stability of aqueous chitosan and alginate solutions at pH values 5–8 will be influenced by oxidative–reductive depolymerization (ORD) as the primary mechanism as long as transition metal ions are presented in the samples. Acid – and alkaline depolymerization will be the primary mechanisms for highly purified samples.     

Immobilization of a protease on modified chitosan beads for the depolymerization of chitosan

Neutral protease was immobilized on chitosan (CS), carboxymethyl chitosan (CMCS), and N-succinyl chitosan (NSCS) hydrogel beads. And the biocatalysts obtained were used to prepare low molecular weight chitosan (LMWC) and chitooligomers. Weight-average molecular weight of LMWC produced by neutral protease immobilized on CS, CMCS and NSCS hydrogel beads were 3.4 kDa, 3.2 kDa and 1.9 kDa, respectively. The effects of immobilization support and substrate on enzymatic reaction were analyzed by measuring classical Michaelis-Menten kinetic parameters. The FT-IR, XRD and potentiometric determination results indicated decrease of molecular weight led to transformation of crystal structure, but the degree of N-deacetylation and chemical structures of residues were not changed compared to initial chitosan. The degree of polymerization of chitooligomers was mainly from 2 to 7. We observed a strong dependence of the immobilized enzyme properties on the chemical nature of the supports, which leads to different microenvironment of neutral protease and changes the hydrolyzing process.     

Swelling behaviour of alginate–chitosan microcapsules prepared by external gelation or internal gelation technology

Swelling behaviour is one of the important properties for microcapsules made by hydrogels, which always affects the diffusion and release of drugs when the microcapsules are applied in drug delivery systems. In this paper, alginate–chitosan microcapsules were prepared by different technologies called external or internal gelation process respectively. With the volume swelling degree (S_w) as an index, the effect of properties of chitosan on the swelling behaviour of both microcapsules was investigated. It was demonstrated that the microcapsules with low molecular weight and high concentration of chitosan gave rise to low S_w. Considering the need of maintaining drug activity and drug loading, neutral pH and short gelation time were favorable. It was also noticed that S_w of internal gelation microcapsules was lower than that of external gelation microcapsules, which was interpreted by the structure analysis of internal or external gelation Ca–alginate beads with the aid of confocal laser scanning microscope.     

Preparation and characterization of sodium hexameta phosphate cross-linked chitosan microspheres for controlled and sustained delivery of centchroman

The cross-linked microspheres using chitosan with different molecular weights and degree of deacetylation have been prepared in presence of sodium hexameta polyphosphate (SHMP) as physical cross-linker. The degree of cross-linking through electrostatic interactions in chitosan microspheres has been evaluated by varying the charge density on chitosan and varying degree of dissociation of sodium hexameta polyphosphate by solution pH. The degree of deacetylation and molecular weight of chitosan has controlled electrostatic interactions between hexameta polyphosphate anions and chitosan, which played significant role in swelling, loading and release characteristics of chitosan microspheres for centchroman. The microspheres prepared by hexameta polyphosphate anions cross-linker were compact and more hydrophobic than covalently cross-linked microspheres, which has been attributed to the participation of all amino groups of chitosan in physical cross-linking with added hexameta polyphosphate anions. The microspheres prepared under different experimental conditions have shown an initial step of burst release, which was followed by a step of controlled release for centchroman. The extent of drug release in these steps has shown dependence on properties of chitosan and degree of cross-linking between chitosan and added polyanions. The degree of swelling and release characteristics of microspheres was also studied in presence of organic and inorganic salts, which shown significant effect on controlled characteristics of microspheres due to variations in ionic strength of the medium. The initial step of drug release has followed first order kinetics and become zero order after attaining an equilibrium degree of swelling in these microspheres. The microspheres prepared using chitosan with 62% (w/w) degree of deacetylation and molecular weight of 1134 kg mol⁻¹ have shown a sustained release for centchroman for 50 h at 4% (w/w) degree of cross-linking with SHMP.     

Characterization and in vitro evaluation of starch based hydrogels as carriers for colon specific drug delivery systems

A series of starch/methacrylic acid (MAAc) copolymer hydrogels of different compositions were synthesized using γ-rays induced polymerization and crosslinking. The effects of the preparation conditions such as the feed solution concentration, feed solution composition and irradiation dose on the gelation process of the synthesized copolymer were investigated. The swelling behavior of the starch/methacrylic acid (MAAc) copolymer hydrogels was characterized by studying the effect of the hydrogel composition on the time- and pH-dependent swelling. Swelling kinetics showed that the synthesized hydrogels possessed Fickian diffusion behavior at pH 1 and non-Fickian diffusion at pH 7 which recommend them as good candidate for colon specific drug delivery systems. The synthesized hydrogels were loaded with ketoprofen as a model drug to investigate the release behavior of the synthesized hydrogels. The results showed the ability of the hydrogels to keep the loaded drug at pH 1 and release it at pH 7. The data also showed that the release rate can be controlled by controlling the preparation conditions such as comonomer concentration and composition and irradiation dose.     

Chemically cross-linked chitosan hydrogel loaded with gelatin for chondrocyte encapsulation

Composite hydrogels can be used as a scaffolding material for chondrogenesis, which requires a biomimetic environment to maintain chondrocyte morphology and phenotype. In this study, gelatin molecules were loaded into a hydrogel polymerized from a chitosan derivative (CML) to form a semi-interpenetrating polymer network. While the porous structure of the hydrogels in the dry state was not dependent on the gelatin content, the collapse extent and pore size decreased as the gelatin content increased. The gelatin loading also reduced the swelling ratio of the CML hydrogel and enhanced the hydrogel strength at 20°C due to gelation of the gelatin. The release behavior of the gelatin from the CML hydrogel could be controlled by many factors, such as the amount of gelatin, temperature, and solution pH. The weight loss of the composite hydrogel was expedited after gelatin loading and showed a positive relationship with the gelatin content. The results of in vitro cell culture in the hydrogels revealed that gelatin loading improved cell viability and promoted proliferation and glycosaminoglycans secretion of chondrocytes. This new scaffold production technology for chondrocyte encapsulation provides a further step towards CML applications in tissue engineering and other biomedical areas.     

Chitosan gelation induced by the in situ formation of gold nanoparticles and its processing into macroporous scaffolds

This work describes a simple synthetic route to induce chitosan (CHI) gelation by the in situ formation of gold nanoparticles (AuNPs). AuNPs were obtained by thermal treatment (e.g., 40 and 80 °C) of CHI aqueous solutions containing HAuCl(4) and in the absence of further reducing agents. The CHI hydrogels resulting after AuNP formation were submitted to unidirectional freezing and subsequent freeze-drying via ISISA (ice-segregation-induced self-assembly) process for the preparation of CHI scaffolds. The study of AuNP-CHI scaffolds by SEM and confocal fluorescence microscopy revealed a morphological structure characteristic of the hydrogel nature of the samples subjected to the ISISA process. Interestingly, not only the morphology but also the dissolution and swelling degree of the resulting CHI scaffolds were strongly influenced by the strength of the hydrogels obtained by the in situ formation of AuNP. We have also studied the catalytic activity AuNP-CHI scaffolds in the reduction of p-nitrophenol. The negligible dissolution and low swelling degree obtained in certain AuNP-CHI scaffolds allowed them to be used for more than four cycles with full preservation of the reaction kinetics.     

Novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate as a pH-sensitive hydrogel

A novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate blended with distinct salts (CaCl2, Na2HPO4, or NaCl), as a pH-sensitive hydrogel was developed for protein drug delivery. It was noted that the salts blended in hydrogels may affect the structures of an entangled network of methylcellulose and alginate and have an effect on their swelling characteristics. The methylcellulose/alginate hydrogel blended with 0.7 M NaCl (with a gelation temperature of 32 degrees C) demonstrated excellent pH sensitivity and was selected for the study of release profiles of a model protein drug (bovine serum albumin, BSA). In the preparation of drug-loaded hydrogels, BSA was well-mixed to the dissolved aqueous methylcellulose/alginate blended with salts at 4 degrees C and then gelled by elevating the temperature to 37 degrees C. This drug-loading procedure in aqueous environment at low temperature may minimize degradation of the protein drug while achieving a high loading efficiency (95-98%). The amount of BSA released from test hydrogels was a function of the amount of alginate used in the hydrogels. The amount of BSA released at pH 1.2 from the test hydrogel with 2.5% alginate was relatively low (20%), while that released at pH 7.4 increased significantly (86%). In conclusion, the methylcellulose/alginate hydrogel blended with NaCl could be a suitable carrier for site-specific protein drug delivery in the intestine.     

Adsorbents for Apheresis Prepared from Polysaccharides of Algae that Threaten Ecosystem Services

In this work, we investigated whether materials isolated from algae that threaten ecosystems can be used for human benefit. We converted acidic polysaccharides (ulvan) from the alga Ulva pertusa into soft hydrogel materials. In addition to ulvan, the hydrogels also contained alginate in a polyion complex with chitosan. Cross‐linking the hydrogel with glutaraldehyde reduced polysaccharide elution from the polyion complex gel. We also found that both ulvan? chitosan and alginate? chitosan gels were able to remove urea and heavy metals from aqueous solution. This is clinically significant, since during apheresis, toxic compounds such as urea have to be removed from the bloodstream of patients. Importantly, albumin was not removed by the hydrogels, implying that this vital protein can be returned to the bloodstream following dialysis.     

Swellable Ciprofloxacin-Loaded Nano-in-Micro Hydrogel Particles for Local Lung Drug Delivery

Incorporation of drug-loaded nanoparticles into swellable and respirable microparticles is a promising strategy to avoid rapid clearance from the lung and achieve sustained drug release. In this investigation, a copolymer of polyethylene glycol grafted onto phthaloyl chitosan (PEG-g-PHCs) was synthesized and then self-assembled with ciprofloxacin to form drug-loaded nanoparticles. The nanoparticles and free drug were encapsulated into respirable and swellable alginate micro hydrogel particles and assessed as a novel system for sustained pulmonary drug delivery. Particle size, morphology, dynamic swelling profile, and in vitro drug release were investigated. Results showed that drug-loaded nanoparticles with size of 218 nm were entrapped into 3.9-μm micro hydrogel particles. The dry nano-in-micro hydrogel particles exhibited a rapid initial swelling within 2 min and showed sustained drug release. Preliminary in vivo pharmacokinetic studies were performed with formulations delivered to rats by intratracheal insufflation. Ciprofloxacin concentrations in plasma and in lung tissue and lavage were measured up to 7 h. The swellable particles showed lower ciprofloxacin levels in plasma than the controlled group (a mixture of lactose with micronized ciprofloxacin), while swellable particles achieved higher concentrations in lung tissue and lavage, indicating the swellable particles could be used for controlling drug release and prolonging lung drug concentrations.KEY WORDS: alveolar macrophage, antibiotics, cross-linking, hydrogel swelling, intratracheal insufflation     

Novel complex hydrogels based on N-carboxyethyl chitosan and quaternized chitosan and their controlled in vitro protein release property

A novel pH-responsive hydrogel (CHC) composed of N-carboxyethyl chitosan (CEC) and N-[(2-hydroxy-3-trimethylammonium) propyl] chitosan chloride (HTCC) was synthesized by the redox polymerization technique. Turbidimetric titrations were used to determine the stoichiometric ratio of these two chitosan derivatives. The hydrogel was characterized by FT-IR, thermal gravimetric analysis (TGA), X-ray diffractometry (XRD), and scanning electron microscopy (SEM). The dynamic transport of water showed that the hydrogel reached equilibrium within 48 h. The swelling ratio of CHC hydrogel depended significantly on the pH of the buffer solution. The performance of the CHC as a matrix for the controlled release of BSA was investigated. It was found that the release behavior was determined by pH value of the medium as well as the intermolecular interaction between BSA and the hydrogels.