Control of cloned gene expression by promoter inversion in vivo: construction of the heat-pulse-activated att-nutL-p-att-N module

We have constructed a prototype of gene-expression plasmids with three novel properties: its "OFF phase" is absolute in all common hosts because the expression promoter is facing away from the studied gene and is blocked by a strong terminator; the "ON phase" is attained by the rapid and efficient inversion of the promoter; only a short heat pulse or exposure to other inducing agents is required to initiate this two-stage process. In the first stage, synthesis of the phage lambda Int protein is induced by the transient derepression of the properly engineered lambda xis- cIts857 prophage. In the immediately following second stage, Int causes inversion of a promoter cloned between the inverted ----P'OP phage att site and the normally oriented ----delta PO delta P' pseudo-bacterial att site. The inverted promoter can now control the expression of the studied gene and also of the lambda N gene cloned in tandem. The N product, in conjunction with the nutL site placed downstream of the promoter, permits efficient antitermination of any terminators present in the att sites, in the plasmid or in the cloned DNA, making this system efficient and of practical value. Employing the promoter-inverting plasmid, it was possible to obtain rapid onset and a high level of galactokinase synthesis from the cloned galK gene. Only a transient, 10-min induction at 42 degrees C was employed, permitting protein synthesis at 30 degrees C, which might be of importance for thermosensitive products. Furthermore, the entire promoter-inversion module can be transferred to any plasmid as a 1.3-kb AvaI-ClaI fragment (see Fig. 1).(ABSTRACT TRUNCATED AT 250 WORDS)     

High-level expression vectors to synthesize unfused proteins in Escherichia coli

A new class of plasmid vectors (pANK-12, pANH-1, and pPL2) for synthesizing unfused proteins was constructed by inserting synthetic linkers at the NdeI site (CATATG) of plasmid pJL6, which contains the lambda cII gene initiator codon. These expression vectors contain the lambda pL promoter, the cII ribosome-binding site, cII start codon and unique restriction sites (KpnI, Asp718, HpaI, BamHI) downstream from the initiator ATG for expression of unfused proteins. The main advantage of these vectors is that any DNA fragment with an open reading frame that does not possess a start and/or a stop codon can be directed to overproduce protein in an unfused form.     

Construction of recombinant plasmids containing rat thyroglobulin mRNA sequences

Two plasmids containing rat thyroglobulin cDNA sequences have been constructed and characterized. A plasmid with a 500-bp insert (pRT6) was isolated and identified as thyroglobulin-specific on the basis of the tissue specificity of the inserted sequence and of its ability to retain thyroglobulin mRNA on a nitrocellulose filter. The cDNA insert in pRT6 was subsequently used to screen a rat thyroid cDNA library constructed with large cDNA. A plasmid was found containing a 1700-bp insert. The polarity and the fidelity of the insert is demonstrated by S1 mapping.     

A 'phase-shift' fusion system for the regulation of foreign gene expression by lambda repressor in gram-negative bacteria

A 'phase-shift' translation fusion vector was constructed in which mutually compatible restriction sites BamHI, BclI and BglII are positioned in such a manner that the cut point is in a different reading frame, immediately following the ATG start codon and ribosome-binding site of the lambda cro gene. The lambda cro gene is expressed from promoter pR and controlled by a thermosensitive (cI857) lambda repressor. The usefulness of the expression vector was demonstrated using a galK gene lacking the ATG start codon and fusing this to the pR promoter and ATG start codon of the lambda cro gene, resulting in cI857-regulated expression of galactokinase. The vector is of general use for foreign gene expression in Escherichia coli when the target gene has a compatible cohesive end (5'-GATC-3') at the N terminus (provided, for example, by a BamHI linker). The lambda cI857-pR-cro-galK cassette was cloned into pJRD215, a wide-host-range plasmid and transferred by conjugation to a variety of Gram-negative bacteria. In all cases, thermosensitive regulation of galactokinase could be demonstrated, though the levels of induction varied considerably. These results show that the powerful lambda pR promoter and the efficient lambda repressor can be used to regulate expression of foreign genes in Gram-negative organisms other than E. coli.     

Improved plasmid vectors with a thermoinducible expression and temperature-regulated runaway replication

Improved expression vectors have been constructed which are derived from runaway-replication mutants of plasmid R1 and carry the strong leftward promoter (pL) of bacteriophage lambda. The activity of this promoter is controlled by a temperature-sensitive repressor, product of the phage gene cI cloned on a compatible plasmid. Heat induction leads to amplification of the plasmid copy number and at the same time turns on the promoter. At a short distance downstream from the promoter, unique EcoRI, BamHI, XbaI and HindIII sites are present. This system was used for high level expression of the T4 DNA-ligase gene; 3 h after induction the ligase amounted to about 20% of total cellular protein.     

Identification in vivo of promoter activity in the left site of the att region of bacteriophage lambda DNA

The promoter-probing vector (pSK plasmid) was explored for cloning of the fragments from lambda cI857 and lambda b2 DNAs containing different regions of the att site. We have constructed all-tet fusions where the fusions are: 1) HindIII/BamHI-491 base pairs (b. p.) fragment of lambda cI857 DNA containing POP' site (plasmid pSK-PP'); 2) AluI-242 b. p. fragment of lambda cI857 DNA containing the left arm of the POP' site (plasmid pSK-P); 3) AluI-242 b. p. fragment of lambda cI857 DNA with opposite orientation (plasmid pSK-P); 4) EcoRI/BamHI-750 b. p. fragment of lambda b2 DNA containing the right arm of the POP' site (plasmid pSK-P'). These fusions permit us to analyse the effect of various pieces of the attachment site on the expression tet gene as the result of reparation of this gene promoter. We find that expression of tet (tetracycline resistant phenotype) takes place in the pSK-PP' and pSK-P but not in the pSK-P' and pSK-P. These facts permit us to conclude that the left arm of the att site contains a rightward promoter functioning in vivo. We postulate that this promoter activity might correspond to the promoter patt, which was described in previous experiments in vitro.     

Isolation of recombinant plasmids and phage carrying the lexA gene of Escherichia coli K-12

The lexA gene of Escherichia coli K-12 was cloned from the plasmid pLC44-14 into pBR322. Plasmids carrying lexA+ were selected by their ability to complement a recessive tsl mutation, which is believed to be a mutation in lexA. The smallest lexA+ recombinant plasmid, pJL21, contained an EcoRI-PstI fragment 2.9 kilobases (kb) in length; two larger plasmids also contained this fragment, and genetic material to one or both sides of the EcoRI-PstI fragment. Plasmids homologous to pJL21, but carrying a dominant mutation, lexA3, or one of three recessive amber mutations in lexA, termed spr, were also isolated. To clone the EcoRI-PstI fragment onto a lambda vector, the PstI end was first converted to an EcoRI end by attachment of a 100-base pair PstI-EcoRI fragment isolated from the plasmid ColE1; the resultant EcoRI fragment was then cloned into the lambda vector lambda gt4. A restriction map of pLC44-14 was obtained for nine restriction enzymes. The orientation of this map was determined relative to the E. coli genetic map by complementation of the gene ubiA+ and by comparison with restriction enzyme digests of another plasmid, pLC11-9, which carries dnaB, a gene closely linked to lexA, but does not carry lexA.     

The DNA between Rz and cosR in bacteriophage lambda is nonessential

Near the right end of phage lambda DNA, between gene Rz and the cos site, are 2050 bp of apparently non-coding DNA. We have cloned a lambda DNA fragment containing this DNA into a plasmid and constructed a deletion, omega l, extending from a site within the Rz gene to a site about 560 bp from cos. This deletion could be recombined into viable lambda phage at a frequency equal to that observed for the undeleted sequence. Recombinant phage lambda carrying the omega l deletion were demonstrated to have the same burst size and kinetics of phage production as undeleted lambda. The omega l deletion can be used to extend the capacity of lambda cloning vectors and to provide a region for the insertion of heterologous DNA which should exhibit controllable high level expression from the lambda late promoter, p'R.     

TGATG vector: a new expression system for cloned foreign genes in Escherichia coli cells

A TGATG vector system was developed that allows for the construction of hybrid operons with partially overlapping genes, employing the effects of translational coupling to optimize expression of cloned cistrons in Escherichia coli. In this vector system (plasmid pPR-TGATG-1), the coding region of a foreign gene is attached to the ATG codon situated on the vector, to form the hybrid operon transcribed from the phage lambda PR promoter. The cloned gene is the distal cistron of this hybrid operon ('overlappon'). The efficiently translated cro'-cat'-'trpE hybrid cistron is proximal to the promoter. The coding region of this artificial fused cistron [the length of the corresponding open reading frame is about 120 amino acids (aa)] includes the following: the N-terminal portions of phage lambda Cro protein (20 aa), the CAT protein of E. coli (72 aa) and 3' C-terminal codons of the E. coli trpE gene product. At the 3'-end of the cro'-cat'-'trpE fused cistron there is a region for efficient translation reinitiation: a Shine-Dalgarno sequence of the E. coli trpD gene and the overlapping stop and start codons (TGATG). In this sequence, the last G is the first nucleotide of the unique SacI-recognition site (GAGCT decreases C) and so integration of the structural part of the foreign gene into the vector plasmid may be performed using blunt-end DNA linking after the treatment of pPR-TGATG-1 with SacI and E. coli DNA polymerase I or its Klenow fragment.(ABSTRACT TRUNCATED AT 250 WORDS)     

Broad-Host-Range Expression Vectors with Tightly Regulated Promoters and Their Use To Examine the Influence of TraR and TraM Expression on Ti Plasmid Quorum Sensing

Experiments requiring strong repression and precise control of cloned genes can be difficult to conduct because of the relatively high basal level of expression of currently employed promoters. We report the construction of a family of vectors that contain a reengineered lacI^q-lac promoter-operator complex in which cloned genes are strongly repressed in the absence of inducer. The vectors, all based on the broad-host-range plasmid pBBR1, are mobilizable and stably replicate at moderate copy number in representatives of the alpha- and gammaproteobacteria. Each vector contains a versatile multiple cloning site that includes an NdeI site allowing fusion of the cloned gene to the initiation codon of lacZα. In each tested bacterium, a uidA reporter fused to the promoter was not expressed at a detectable level in the absence of induction but was inducible by 10- to 100-fold, depending on the bacterium. The degree of induction was controllable by varying the concentration of inducer. When the vector was tested in Agrobacterium tumefaciens, a cloned copy of the traR gene, the product of which is needed at only a few copies per cell, did not confer activity under noninducing conditions. We used this attribute of very tight and variably regulatable control to assess the relative amounts of TraR required to activate the Ti plasmid conjugative transfer system. We identified levels of induction that gave wild-type transfer frequencies, as well as levels that induced correspondingly lower frequencies of transfer. We also used this system to show that the antiactivator TraM sets the level of intracellular TraR required for tra gene activation.     

Cloning, characterization, and heterologous expression of the Saccharopolyspora erythraea (Streptomyces erythraeus) gene encoding an EF-hand calcium-binding protein.

The regulatory effects of Ca2+ in eucaryotic cells are mostly mediated by a superfamily of Ca2+-binding proteins (CABs) that contain one or more characteristic Ca2+-binding structural motifs, referred to as EF hands. We have cloned and sequenced the structural gene for an authentic EF-hand CAB from the spore-forming gram-positive bacterium Saccharopolyspora erythraea (formerly Streptomyces erythraeus). When the gene was introduced into Streptomyces lividans on the high-copy plasmid vector pIJ702, CAB was found to be expressed at higher levels than in S. erythraea, with no apparent effects on either growth or sporulation. A more convenient expression system for CAB was obtained by introducing an NdeI site at the initiation codon by using oligonucleotide-directed mutagenesis and placing the gene in the expression vector pT7-7 in Escherichia coli. In this system, CAB was efficiently expressed at levels up to 20 to 30% of total cell protein. When purified to homogeneity from either E. coli or Streptomyces lividans, CAB was found to be identical to the protein previously obtained from S. erythraea.     

Identification of sequences necessary for packaging DNA into lambda phage heads

Several species of DNA molecules are packaged into lambda phage heads if they carry the region around the cohesive end site of lambda phage (cos lambda). The minimal functional sequence around cos lambda needed for packaging was examined by cloning in pBR322. The results showed that the minimal region contained 85 bp around cos lambda; 45 bp of the left arm of lambda phage and 40 bp of the right arm. A 75-bp region located to the right of the minimal region seems to enhance packaging. A 223-bp fragment containing these regions can be used as a portable element for plasmid DNA packaging into lambda phage heads. Plasmid ppBest 322, a derivative of pBR322 carrying this portable packager and both amp and tet genes, was constructed. This plasmid is useful for cloning of large DNA fragments.     

Isolation and characterization of the Streptomyces cattleya temperate phage TG1

A temperate actinophage, TG1, was isolated from soil by growth on Streptomyces cattleya and has been shown to be potentially useful for the cloning of DNA in this organism and other streptomycetes. It forms stable lysogens by integration at a unique site on the chromosome. The phage genome consists of 41 kb of double-stranded DNA with cohesive ends. It has unique sites for ClaI, NdeI, PstI, SmaI, and XbaI. The PstI site has been shown to be in a dispensable region of the phage genome. Deletions (2 kb in length) were obtained which retain this site and should be useful for the cloning of DNA.