Structural analysis of a Lotus japonicus genome. II. Sequence features and mapping of sixty-five TAC clones which cover the 6.5-mb regions of the genome.

Sixty-five TAC (transformation-competent artificial chromosomes) clones were selected from a genomic library of Lotus japonicus accession MG-20 based on the sequence information of expressed sequences tags (ESTs), cDNA and gene information, and their nucleotide sequences were determined. The average insert size of the TAC clone was approximately 100 kb, and the total length of the sequenced regions in this study is 6,556,100 bp. Together with the nucleotide sequences of 56 TAC clones previously reported, the regions sequenced so far total 12,029,295 bp. By comparison with the sequences in protein and EST databases and by analysis with computer programs for gene modeling, a total of 711 potential protein-encoding genes with known or predicted functions, 239 gene segments and 90 pseudogenes were identified in the newly sequenced regions. The average gene density assigned so far was 1 gene/9140 bp. The average length of the assigned genes was 2.6 kb, which is considerably larger than that assigned in the Arabidopsis thaliana genome (1.9 kb for 6451 genes). Introns were identified in approximately 73% of the potential genes, and the average number and length of the introns per gene were 3.4 and 377 bp, respectively. Simple sequence repeat length polymorphism (SSLP) or derived cleaved amplified polymorphic sequence (dCAPS) markers were generated based on the nucleotide sequences of the genomic clones obtained, and each clone was mapped onto the linkage map using the F2 mapping population derived from a cross of two accessions of L. japonicus, Gifu B-129 and Miyakojima MG-20. The sequence data, gene information and mapping information are available through the World Wide Web at http://www.kazusa.or.jp/lotus/.     

Primary mesenchyme cells of the sea urchin embryo require an autonomously produced, nonfibrillar collagen for spiculogenesis

A collagen molecule in the sea urchin embryo was characterized by analysis of a 2.7-kb cDNA clone. This clone, Spcoll, was obtained by screening a gastrula stage Strongylocentrotus purpuratus cDNA library with a 237-bp genomic clone encoding a collagen-like sequence previously isolated by Venkatesan et al. (1986). DNA sequence analysis of the cDNA clone demonstrated the nonfibrillar nature of the encoded molecule--13 interruptions of the Gly-X-Y repeat motif were found in the 85-kDa open reading frame. The mRNA of approximately 9 kb accumulated specifically in mesenchyme cells of the embryo through development to the pluteus larva. Polyclonal antibodies generated against a Spcoll-beta-galactosidase fusion protein were utilized to identify and localize the native Spcoll. This collagen molecule of approximately 210 kDa was deposited into the blastocoel by the primary mesenchyme cells. When primary mesenchyme cells were cultured in vitro, Spcoll was secreted into the media and accumulated at sites of cell-substrate interaction. Addition of anti-Spcoll antibodies to primary mesenchyme cell cultures selectively inhibited spiculogenesis, whereas other antibodies had no inhibitory effect. Since collagen is not a component of the organic matrix of spicules (Benson et al., 1986), these results suggest that the autonomous production of Spcoll by differentiating mesenchyme cells in turn influences the point in differentiation at which these cell initiate biomineralization.     

Location of the 11 bp exon in the chicken pro alpha 2(I) collagen gene.

During the fine structural analysis of the 5' end of the 38 kb chicken pro alpha 2(I) collagen gene, we failed to locate an exon, only 11 bp in size, which had been predicted from the DNA sequence analysis of a cDNA clone complementary to the 5' end of the pro alpha 2(I) collagen mRNA (1). We know report the location of this 11 bp exon, exon 2, at the 5' end of a 180 bp Pst I fragment, 1900 bp 3' to exon 1 and 600 bp 5' to exon 3. Its sequence, ATGTGAGTGAG, is highly unusual in that it contains two overlapping consensus donor splice sequences. Moreover, it is flanked by two overlapping donor splice sequences but only one of the four splice sequences is actually spliced (1). The first half of intron 1 also has an unusual sequence: it is 68% GC, contains 88 CpG dinucleotides and 11 Hpa II sites. The second half is more like other intron sequences in the collagen gene with a GC content of 41%, 19 CpG, and no Hpa II sites. However it contains two sequences with 7 and 9 bp homology to the 14 bp SV40 enhancer core sequence. It is suggested that some part of intron 1 may be involved in regulation.     

The triple-helical domain of alpha 2(VI) collagen is encoded by 19 short exons that are multiples of 9 base pairs

We have analyzed the structure of the gene coding for the alpha 2(VI) subunit of chicken type VI collagen. The triple-helical domain of this polypeptide is encoded by 19 short exons distributed over 10 kilobase pairs of genomic DNA. These exons begin with the codon for glycine and end with the codon for the Y amino acid of the collagenous triplet Gly-X-Y. The sizes of the exons are integral multiples of 9 base pairs (bp) (27, 36, 45, 54, 63, and 90 bp), the predominant one being 63 bp. The organization of this type VI collagen gene is therefore quite different from that of the fibrillar collagen genes which have evolved by duplication of a primordial 54-bp unit. It also differs from that of the basement membrane collagen genes whose exon/intron boundaries often split the codons for amino acids.     

Isolation and partial characterization of genomic clones coding for a human pro-alpha 1 (II) collagen chain and demonstration of restriction fragment length polymorphism at the 3' end of the gene

We have isolated two clones containing 19 kilobases (kb) of the human gene coding for a pro-alpha 1 (II) collagen chain from human lambda genomic DNA libraries. A 3' clone, HC2A, was selected by cross-hybridization with a cDNA clone containing sequences coding for the carboxy propeptide of chick type II procollagen. A second clone, HC2B, was obtained by screening the library with the 5' part of HC2A. The sequence analysis of exon 3 corresponding to the C propeptide reveals the presence of stretches of conserved nucleotides between the human and the chick type II procollagen genes. On Northern blots, the human collagen clone hybridizes strongly to a 5.5-kb RNA for the rat type II procollagen chain. Finally, studies of genomic DNAs from normal individuals reveal the presence of a HindIII and a BamHI polymorphic site at the 3' end of the gene.     

A variant tandemly repeated nucleotide sequence in Balbiani ring 2 of Chironomus tentans

pCtBR2-2 is a genomic clone from Chironomus tentans that hybridized in situ to Balbiani ring 2 (BR2) on salivary gland polytene chromosome IV. DNA sequencing indicated that the insert contained nearly four copies of a 180 bp tandemly repeated nucleotide sequence that was distinctly different from a previously reported BR2 repeat. Sequence titration experiments detected about 70 copies of the 180 bp repeat per haploid genome, which would correspond to approximately 34% of a 37 kb BR2 gene. Each 180 bp repeat included a conserved 90 bp segment whose sequence was internally nonrepeating (INR), and a variable 90 bp repeated (R) segment comprised of three 30 bp repeats that may have evolved from a 9 bp consensus sequence. Results presented here raise the distinct possibility that other BR genes may contain significantly different repeated sequences that have not been identified.     

The Ha locus of wheat: identification of a polymorphic region for tracing grain hardness in crosses.

The grain softness proteins or friabilins are known to be composed of three main components: puroindoline a, puroindoline b, and GSP-1. cDNAs for GSP-1 have previously been mapped to group-5 chromosomes and their location on chromosome 5D is closely linked to the grain hardness (Ha) locus of hexaploid wheat. A genomic DNA clone containing the GSP-1 gene (wGSP1-A1) from hexaploid wheat has been identified by fluorescent in situ hybridization as having originated from the distal end of the short arm of chromosome 5A. A genomic clone containing the gene (wGSP1-D1) was also isolated from Aegilops tauschii, the donor of the D genome to bread wheat. There are no introns in the GSP-1 genes, and there is high sequence identity between wGSP1-A1 and wGSP1-D1 up to 1 kb 5' and 300 bp 3' to wGSP1-D1. However, regions further upstream and downstream of wGSP1-D1 share no significant sequence identity to corresponding sequences in wGSP1-A1. These regions therefore identified potentially valuable sequences for tracing the Ha locus through assaying polymorphic DNA sequences. The sequence from 300 to 500 bp 3' to wGSP1-D1 (wGSP1-D13) was mapped to the Ha locus in a mapping population. wGSP1-D13 was also tightly linked to genes for puroindoline a and puroindoline b which have been previously mapped to be at the Ha locus. In addition wGSP1-D13 was used to detect RFLPs between near isogenic soft and hard Falcon lines and in a random selection of soft and hard wheats.     

The CIC library: a large insert YAC library for genome mapping in Arabidopsis thaliana

A new Arabidopsis thaliana (ecotype Columbia) genomic library has been constructed in Yeast Artificial Chromosomes: the CIC library (for CEPH, INRA and CNRS). Optimization of plant culture conditions and protoplast preparation allowed the recovery of large amounts of viable protoplasts. Mechanical shearing of DNA was minimized by isolation of DNA from protoplasts embedded in agarose. Cloning of large inserts was favored by including two successive size fractionation steps (after partial Eco RI digestion and after ligation with the vector arms), which selected DNA fragments larger than 350 kb. The library consists of 1152 clones with an average insert size of 420 kb. Clones carrying chloroplast DNA and various nuclear repeated sequences have been identified. Twenty-one per cent of the clones are found to contain chloroplast DNA. Therefore, the library represents around four nuclear genome equivalents. The clones containing 5S rDNA genes, 18S-25S rDNA sequences and the 180 bp paracentromeric repeated element account for 3.6%, 8.9% and 5.8%, respectively. Only one clone was found to carry the 160 bp paracentromeric repeated element. Given the smaller size of clones carrying Arabidopsis repeated DNA, the average size of remaining clones is around 480 kb. The library was screened by PCR amplification using pairs of primers corresponding to sequences dispersed in the genome. Seventy out of 76 pairs of primers identified from one to seven YAC clones. Thus at least 92% of the genome is represented in the CIC library. The survey of the library for clones containing unlinked DNA sequences indicates that the proportion of chimeric clones is lower than 10%.     

Genomic structure of murine mitochondrial DNA polymerase-gamma

We have sequenced a genomic clone of the gene encoding the mouse mitochondrial DNA polymerase. The gene consists of 23 exons, which span approximately 13.2 kb, with exons ranging in size from 53 to 768 bp. All intron-exon boundaries conform to the GT-AG rule. By comparison with the human genomic sequence, we found remarkable conservation of the gene structure; the intron-exon borders are in almost identical locations for the 22 introns. The 5' upstream region contains approximately 300 bp of homology between the mouse and human sequences that presumably contain the promoter element. This region lacks any obvious TATA domain and is relatively GC rich, consistent with the housekeeping function of the mitochondrial DNA polymerase. Finally, within the 5' flanking region, both mouse and human genes have a region of 73 bp with high homology to the tRNA-Arg gene.