The heterochromatin of grasshoppers from the Caledia captiva species complex. I. Sequence evolution and conservation in a highly repeated DNA family

The restriction enzyme TaqI digests 0.2% of the genomic DNA from the grasshopper Caledia captiva to a family of sequences 168 bp in length (length of consensus sequence). The sequence variation of this "Taq family" of repeat units was examined among four races from C. captiva to assay the pattern of evolution within this highly repeated DNA. The Taq-family repeats are located in C-banded heterochromatin on at least one member of each homologous pair of chromosomes; the locations range from centromeric to telomeric. Thirty-nine cloned repeats isolated from two population 1A individuals along with 11 clones from seven populations taken from three of the races demonstrated sequence variation at 72 positions. Pairwise comparisons of the cloned repeats, both within an individual and between different races, indicate that levels of intraspecific divergence, as measured by reproductive incompatibility, do not correlate with sequence divergence among the 168-bp repeats. A number of subsequences within the repeat remain unchanged among all 50 clones; the longest of these is 18 bp. That the same 18-bp subsequence is present in all clones examined is a finding that departs significantly (P less than 0.01) from what would be expected to occur at random. Two other cloned repeats, from a reproductively isolated race of C. captiva, have sequences that show 56% identity with this 18-bp conserved region. An analysis showed that the frequency of occurrence of an RsaI recognition site within the 168- bp repeat in the entire Taq family agreed with that found in the cloned sequences. These data, along with a partial sequence for the entire Taq family obtained by sequencing uncloned repeats, suggest that the consensus sequence from the cloned copies is representative of this highly repeated family and is not a biased sample resulting from the cloning procedure. The 18-bp conserved sequence is part of a 42-bp sequence that possesses dyad symmetry typical of protein-binding sites. We speculate that this may be significant in the evolution of the Taq family of sequences.      

Molecular characterization of a family of tandemly repeated DNA sequences,TR-1, in heterochromatic knobs of maize and its relatives

Two families of tandem repeats, 180-bp and TR-1, have been found in the knobs of maize. In this study, we isolated 59 clones belonging to the TR-1 family from maize and teosinte. Southern hybridization and sequence analysis revealed that members of this family are composed of three basic sequences, A (67 bp); B (184 bp) or its variants B' (184 bp), 2/3B (115 bp), 2/3B' (115 bp); and C (108 bp), which are arranged in various combinations to produce repeat units that are multiples of approximately 180 bp. The molecular structure of TR-1 elements suggests that: (1) the B component may evolve from the 180-bp knob repeat as a result of mutations during evolution; (2) B' may originate from B through lateral amplification accompanied by base-pair changes; (3) C plus A may be a single sequence that is added to B and B', probably via nonhomologous recombination; and (4) 69 bp at the 3' end of B or B', and the entire sequence of C can be removed from the elements by an unknown mechanism. Sequence comparisons showed partial homologies between TR-1 elements and two centromeric sequences (B repeats) of the supernumerary B chromosome. This result, together with the finding of other investigators that the B repeat is also fragmentarily homologous to the 180-bp repeat, suggests that the B repeat is derived from knob repeats in A chromosomes, which subsequently become structurally modified. Fluorescence in situ hybridization localized the B repeat to the B centromere and the 180-bp and TR-1 repeats to the proximal heterochromatin knob on the B chromosome.     

Palindromy and the Location of Deletion Endpoints in Escherichia Coli

The contributions of direct and inverted repeats to deletion formation were studied by characterizing Ampr revertants of plasmids with a series of insertion mutations at a specific site in the pBR322 ampicillin resistance (amp) gene. The inserts at this site are palindromic, variable in length, and bracketed by 9- or 10-bp direct repeats of amp sequence. There is an additional direct repeat composed of 4 bp within the insert and 4 bp of adjoining amp sequence. DNA sequencing and colony hybridization of Ampr revertants showed that they contained either the parental amp sequence, implying deletion endpoints in the flanking 9- or 10-bp repeats, or a specific 1-bp substitution, implying endpoints in the 4-bp repeats. Although generally direct repeats seem to be used as deletion endpoints with a frequency proportional to their lengths, we found that with uninterrupted palindromes longer than 32 bp, the majority of deletions ended in the 4 bp, not the 9- or 10-bp repeats. This preferential use of the shorter direct repeats associated with palindromes is interpreted according to a DNA synthesis-error model in which hairpin structures formed by intrastrand pairing foster the slippage of nascent strands during DNA synthesis.     

Composition and chromosomal localization of cetacean highly repetitive DNA with special reference to the blue whale,Balaenoptera musculus

Three highly repetitive DNA components — the common cetacean component, the heavy (GC-rich) satellite and the light (AT-rich) satellite — were studied in the blue whale. Consensus sequences of the common component and the heavy satellite were determined on the basis of three repeats of the common component and eight repeats of the heavy satellite. The tandemly organized common cetacean component, which comprises a large portion of all cetacean — both odontocete (toothed whale) and mysticete (whalebone whale) — genomes has a repeat length of 1,760 bp and the three clones analysed showed a high degree of conformity. The repeat contains a 72 bp sequence with dyad symmetry and striking intrastrand complementarity. The rest of the repeat comprises a unique sequence. The repeat unit of the heavy satellite of the blue whale is 422 bp. Also this component is tandemly organized. About half the length of the repeat constitutes a unique sequence and the other half is made up of subrepeats with TTAGGG as a frequent motif. The light satellite has not been sequenced and its basic repeat unit has not yet been identified. The chromosomal localization of the three components was determined by in situ hybridization using ³H-labelled cloned fragments as probes. The common cetacean component was located in most interstitial and terminal C-bands. The heavy satellite occurred primarily in terminal C-bands. When the two components hybridized to the same terminal C-bands, the localization of the heavy satellite was distal to that of the common cetacean component. Neither component shared localization with the light satellite which is located in centromeric C-bands in just a few chromosome pairs.     

Nucleotide sequence analysis and enhancer function of long terminal repeats associated with an endogenous African green monkey retroviral DNA.

The nucleotide sequence and enhancer activity of the long terminal repeats (LTRs) associated with a cloned endogenous African green monkey (AGM) retroviral DNA designated as lambda-AGM-1 was studied. A unique feature of the endogenous AGM proviral LTRs was the presence of multiple copies of two types of directly repeating units in the U3 region: 16 8-base-pair (bp) repeats were present in the 5' LTR and 12 were present in the 3' LTR which were bound by a 6-bp perfect direct repeat; tandem duplication of a 32-bp sequence resulted in 3.5 copies in the 5' LTR and 2.5 copies in the 3' LTR. Nucleotide sequence homology was seen between the 8-bp direct repeats located in the AGM proviral LTRs and a 10-bp repeat unit of the deca-satellite present in AGM cellular DNA. The 32-bp repeats of the AGM proviral LTRs contained sequences which were related to the SV40 21-bp repeats and to the "core" of the SV40 72-bp enhancer element. Furthermore, the AGM provirus was distinct from known infectious retroviruses due to the presence of a primer-binding sequence complementary to the 3' terminus of mammalian tRNAGly. Functional analysis of the 3' LTR present in lambda-AGM-1 DNA by chloramphenicol acetyltransferase assay demonstrated enhancer activity associated with the 32-bp direct repeats. Sequences outside the 32-bp unit were necessary for full activator function, suggesting the presence of multiple enhancer domains in the AGM provirus.     

Centromere 3 specific tandem repeat from Chironomus pallidivittatus

A 155-bp tandem repeat was previously reported to be present in all centromeric regions of the dipteran Chironomus pallidivittatus. We have now isolated a second centromere specific tandem repeat, 375 bp long. Two blocks were found of the new unit, differing in size, probably representing allelic forms. The repeat is present only in chromosome 3, bordering 155-bp repeat arrays. There are about 100 repeats per genome, compared to 1300 units for the 155-bp repeat. The two units contain an identical 9-bp sequence which can form target-site duplications flanking a short mobile element, Cp1. An inversion within the tandem array was isolated, the breakpoint of which is within the 9-bp target sequence. Another short shared motif, 10-bp long, is also present at the insertion site for a mobile element. The two repeat units are similar in having long regions with more than 80% AT and an overall high AT content. Received: 16 February 1998; in revised form: 4 August 1998 / Accepted: 5 August 1998     

Long tandem arrays of complex repeat units in Chironomus telomeres.

A cloned 340-bp DNA fragment excised by EcoRI from the Chironomus pallividittatus genome has been localized to the telomeres by in situ hybridization as well as to connectives between telomeres. No hybridization was observed in other regions of the chromosomes. Another cloned EcoRI fragment, 525 bp long has also been studied. This represents a partial duplication of the 340-bp sequence. Genomic blot hybridization experiments show that the 340-bp sequence is a representative monomeric unit of tandemly repeated arrays which account for 1.2% of the Chironomus genome, on average 300 kb per telomere. The repeat unit contains two types of subrepeats each present twice per repeat unit. Northern blot hybridization experiments show that the telomere-associated sequences are transcribed into a discrete RNA species approximately 20 kb in size. The evolution of this telomere-associated DNA is discussed.     

A centromeric tandem repeat family originating from a part of Ty3/gypsy-retroelement in wheat and its relatives

From a wild diploid species that is a relative of wheat, Aegilops speltoides, a 301-bp repeat containing 16 copies of a CAA microsatellite was isolated. Southern blot and fluorescence in situ hybridization revealed that approximately 250 bp of the sequence is tandemly arrayed at the centromere regions of A- and B-genome chromosomes of common wheat and rye chromosomes. Although the DNA sequence of this 250-bp repeat showed no notable homology in the databases, the flanking or intervening sequences between the repeats showed high homologies (>82%) to two separate sequences of the gag gene and its upstream region in cereba, a Ty3/gypsy-like retroelement of Hordeum vulgare. Since the amino acid sequence deduced from the 250 bp with seven CAAs showed some similarity ( approximately 53%) to that of the gag gene, we concluded that the 250-bp repeats had also originated from the cereba-like retroelements in diploid wheat such as Ae. speltoides and had formed tandem arrays, whereas the 300-bp repeats were dispersed as a part of cereba-like retroelements. This suggests that some tandem repeats localized at the centromeric regions of cereals and other plant species originated from parts of retrotransposons.     

Insertion of an intermediate repetitive sequence into a sea urchin histone-gene spacer

Summary A common polymorphism of the early embryonic histone-gene repeat ofStrongylocentrotus purpuratus is a 195-bp insertion within the H4-H2B spacer. The sequence, found as an insert in histone-gene repeats of 6 of 22 individuals screened, is also found at approximately 50 sites elsewhere in the genome of every individual. We compare the sequences of the histone-gene spacers that do and do not contain the insert. The insert is found not to have transposon-like features, and no sequence in the original spacer has been duplicated to flank the insert. There is, however, a hexanucleotide sequence that is repeated three times at one end of the insert, and the element has inserted between direct repeats of 5 bp that were present in the original spacer. One of the copies found outside the histone gene cluster was cloned and sequenced and is compared with the insert. Again, no transposon-like features are evident. Regions flanking the homologous sequence in this clone were used as hybridization probes in whole-genome blots. Results indicate that the 195-bp sequence insert is itself embedded within a larger element that is repeated within the genome. Therefore, only a portion of a larger repetitive sequence has integrated into the histone-gene spacer. The sequence features of the insert, although not typical of mobile elements, may be representative of other illegitimate recombination events.     

Characterization and localization of repetitive DNA sequences in the ornamental Alstroemeria aurea Graham

 Three repetitive DNA sequences were isolated from a genomic DNA library of the ornamental Alstroemeria aurea Graham. Two repeats, A001-I and A001-II, were quite homologous and highly A. aurea-specific. A001-I was a 217-bp sequence with several telomeric TTTAGGG repeats at the 5′ end and a unique sequence of 98 bp at the other end. The third repeat, A001-IV, was a 840-bp sequence which contained two sub-sequences of 56 and 74 bp respectively, previously found in chloroplast (cp) DNA of tobacco and spinach and to a lesser extent in the cpDNA of maize and rice. Repeat A001-IV was not species-specific and its hybridization signal was weaker than the other repeats. Fluorescence in situ hybridization (FISH) revealed the A. aurea-specific repeats to be located in the heterochromatic regions of all A. aurea chromosomes. The differences in FISH pattern make them useful tools for karyotype analysis. The non-species-specific sequence A001-IV gave a dispersed signal over all the Alstroemeria chromosomes in an interspecific hybrid. The potential use of these repetitive DNA sequences for the study of phylogenetic relationships within the genus Alstroemeria is discussed. Received: 24 November 1996/Accepted: 20 December 1996     

Tnat1 and Tnat2 from Arabidopsis thaliana: novel transposable elements with tandem repeat sequences.

A computer-aided homology search of databases found that the nucleotide sequences flanking ATLN44, a non-LTR retrotransposon (LINE) from Arabidopsis thaliana, are repeated in the A. thaliana genome. These sequences are homologous to flanking sequences of 664 bp with terminal inverted repeat sequences of about 70 bp. The 664-bp sequence and most of the 14 homologues identified were flanked by direct repeat sequences of 9 bp. These findings indicate that the repeated sequence, named Tnat1, is a transposable element that duplicates a 9-bp sequence at the target site on transposition and that ATLN44 is inserted in one Tnat1 member. Interestingly, all of the Tnat1 members had tandem repeats comprised of several units of a 60-bp sequence, the number of repeats differing among Tnat1 members. Of the Tnat1 members identified, one was inserted into another sequence repeated in the A. thaliana genome: that sequence is about 770 bp long and has terminal inverted repeat sequences of about 110 bp. The sequence is flanked by direct repeats of a 9-bp sequence, indicating that it is another transposable element, named Tnat2, from A. thaliana. Moreover, Tnat2 members had a tandem repeat about 240 bp long. Tnat1 and Tnat2 with tandem repeats in their internal regions show no homology to each other or to any of the elements identified previously; therefore they appear to be novel transposable elements.     

A novel transposon-like repeat interrupted by an LTR element occurs in a cluster of B1 repeats in the mouse c-mos locus.

The mouse genomic locus containing the oncogene c-mos was analyzed for repetitive DNA sequences. We found a single B1 repeat 10 kb upstream and three B1 repeats 0.6 kb, 2.7 kb, and 5.4 kb, respectively, downstream from c-mos. The B1 repeat closest to c-mos contains an internal 7-bp duplication and a 18-bp insertion. Localized between the last two B1 repeats is a copy of a novel mouse repeat. Sequence comparison of three copies of this novel repeat family shows that they a) contain a conserved BglII site, b) are approximately 420 bp long, c) possess internal 50-bp polypurine tracts, and d) have structural characteristics of transposable elements. They are present in about 1500 copies per haploid genome in the mouse, but are not detectable in DNA of other mammals. The BglII repeat downstream from c-mos is interrupted by a single 632-bp LTR element. We estimate that approximately 1200 copies of this element are present per haploid genome in BALB/c mice. It shares sequence homology in the R-U5 region with an LTR element found in 129/J mice.     

Map and analysis of microsatellites in the genome of <Emphasis Type="Italic">Populus</Emphasis>: The first sequenced perennial plant

We mapped and analyzed the microsatellites throughout 284295605 base pairs of the unambiguously assembled sequence scaffolds along 19 chromosomes of the haploid poplar genome. Totally, we found 150985 SSRs with repeat unit lengths between 2 and 5 bp. The established microsatellite physical map demonstrated that SSRs were distributed relatively evenly across the genome of Populus. On average, These SSRs occurred every 1883 bp within the poplar genome and the SSR densities in intergenic regions, introns, exons and UTRs were 85.4%, 10.7%, 2.7% and 1.2%, respectively. We took di-, tri-, tetra-and pentamers as the four classes of repeat units and found that the density of each class of SSRs decreased with the repeat unit lengths except for the tetranucleotide repeats. It was noteworthy that the length diversification of microsatellite sequences was negatively correlated with their repeat unit length and the SSRs with shorter repeat units gained repeats faster than the SSRs with longer repeat units. We also found that the GC content of poplar sequence significantly correlated with densities of SSRs with uneven repeat unit lengths (tri-and penta-), but had no significant correlation with densities of SSRs with even repeat unit lengths (di-and tetra-). In poplar genome, there were evidences that the occurrence of different microsatellites was under selection and the GC content in SSR sequences was found to significantly relate to the functional importance of microsatellites.     

Map and analysis of microsatellites in the genome of Populus: The first sequenced perennial plant

Environmental Sciences Division, Oak Ridge National Laboratory, TN, USA We mapped and analyzed the microsatellites throughout 284295605 base pairs of the unambiguously assembled sequence scaffolds along 19 chromosomes of the haploid poplar genome. Totally, we found 150985 SSRs with repeat unit lengths between 2 and 5 bp. The established microsatellite physical map demonstrated tr at SSRs were distributed relatively evenly across the genome of Populus. On average, These SSRs occurred every 1883 bp within the poplar genome and the SSR densities in intergenic regions, introns, exons and UTRs were 85.4%, 10.7%, 2.7% and 1.2%, respectively. We took di-, tri-, tetra-and pentamers as the four classes of repeat units and found that the density of each class of SSRs decreased with the repeat unit lengths except for the tetranucleotide repeats. It was noteworthy that the length diversification of microsatellite sequences was negatively correlated with their repeat unit length and the SSRs with shorter repeat units gained repeats faster than the SSRs with longer repeat units. We also found that the GC content of poplar sequence significantly correlated with densities of SSRs with uneven repeat unit lengths (tri-and penta-), but had no significant correlation with densities of SSRs with even repeat unit lengths (di-and tetra-). In poplar genome, there were evidences that the occurrence of different microsatellites was under selection and the GC content in SSR sequences was found to significantly relate to the functional importance of microsatellites.     

Molecular cloning and characterization of novel centromeric repetitive DNA sequences in the blue-breasted quail (Coturnix chinensis,Galliformes)

A new family of centromeric highly repetitive DNA sequences was isolated from EcoRI-digested genomic DNA of the blue-breasted quail (Coturnix chinensis, Galliformes), and characterized by filter hybridization and chromosome in situ hybridization. The repeated elements were divided into two types by nucleotide length and chromosomal distribution; the 578-bp element predominantly localized to microchromosomes and the 1,524-bp element localized to chromosomes 1 and 2. The 578-bp element represented tandem arrays and did not hybridize to genomic DNAs of other Galliformes species, chicken (Gallus gallus), Japanese quail (Coturnix japonica) and guinea fowl (Numida meleagris). On the other hand, the 1,524-bp element was not organized in tandem arrays, and did hybridize to the genomic DNAs of three other Galliformes species, suggesting that the 1,524-bp element is highly conserved in the Galliformes. The 578-bp element was composed of basic 20-bp internal repeats, and the consensus nucleotide sequence of the internal repeats had homologies to the 41-42 bp CNM repeat and the XHOI family repeat of chicken. Our data suggest that the microchromosome-specific highly repetitive sequences of the blue-breasted quail and chicken were derived from a common ancestral sequence, and that they are one of the major and essential components of chromosomal heterochromatin in Galliformes species.     

Minimal transcriptional enhancer of simian virus 40 is a 74-base-pair sequence that has interacting domains.

We have assayed the ability of segments of the simian virus 40 (SV40) 72-base-pair (bp) repeat enhancer region to activate gene expression under the control of the SV40 early promoter and to compete for trans-acting enhancer-binding factors of limited availability in vivo in monkey CV-1 or human HeLa cells. The bacterial chloramphenicol acetyltransferase and the herpes simplex virus type 1 thymidine kinase genes were used as reporters in these assays. A 94-bp sequence located between SV40 nucleotides 179 and 272, including one copy of the 72-bp repeat, has been termed the minimal enhancer in previous studies. In the present study, we found that the 20-bp origin-proximal region located between nucleotides 179 and 198 was dispensable, since its removal caused only a slight reduction in enhancer activity. However, the deletion of another 4 bp up to nucleotide 202 abolished the enhancer activity. We propose that the minimal enhancer is a 74-bp sequence located between nucleotides 199 and 272, including 52 bp of one copy of the 72-bp repeat and a 22-bp adjacent sequence up to the PvuII site at 272. The nonamer 5'-AAGT/CATGCA-3', which we term the K core, occurred as a tandem duplication around the SphI site at nucleotide 200, and we found that this duplication was essential for enhancement and factor-binding activities. A heterologous core element (which we term the C core), 5'-GTGGA/TA/TA/TG-3', identified earlier (G. Khoury and P. Gruss, Cell 33:313-314, 1983; Weiher et al., Science 219:626-631, 1983) also occurred in duplicate, with one of the copies located within the 22-bp sequence near nucleotide 272 present outside the 72-bp repeat. We provide direct evidence that this 22-bp sequence augments enhancer activity considerably. We also found that in addition to the heterologous interaction occurring normally between the K and C cores within the minimal enhancer, certain homologous interactions were also permitted provided there was proper spacing between the elements.