Optimisation of aqueous two-phase extraction of human antibodies

The purification of human antibodies in an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) 6000 and phosphate was optimised by surface response methodology. A central composite design was used to evaluate the influence of phosphate, PEG and NaCl concentration and of the pH on the purity and extraction yield of IgG from a simulated serum medium. The conditions that maximise the partition of IgG into the upper phase were determined to be high concentrations of NaCl and PEG, low concentrations of phosphate and low pH values. An ATPS composed of 12% PEG, 10% phosphate, 15% NaCl at pH 6 was further used to purify human monoclonal antibodies from a Chinese Hamster Ovary (CHO) concentrated cell culture supernatant with a recovery yield of 88% in the upper PEG-rich phase and a purification factor of 4.3. This ATPS was also successfully used to purify antibodies from a hybridoma cell culture supernatant with a recovery yield of 90% and a purification factor of 4.1.     

Partitioning of recombinant human granulocyte-macrophage colony stimulating factor (hGM-CSF) from plant cell suspension culture in PEG/sodium phosphate aqueous two-phase systems

Partitioning of human granulocyte-macrophage colony stimulating factor (hGM-CSF) was achieved in the aqueous two-phase systems (ATPSs) using a crude extract of transgenic tobacco cell suspension culture. This study examined the effects of polyethylene glycol (PEG) molecular weight and concentration and the effects of sodium phosphate concentration in different PEG/sodium phosphate systems on the partition coefficient,K. The best ATPS system was 5% PEG 8,000/1.6 M sodium phosphate after 2 h of incubation at room temperature. In this system, hGM-CSF was partitioned in the PEG-rich phase with a yield of 57.99% andK _hGM-CSF of 8.12. In another system, 3% PEG 10,000/1.6 M sodium phosphate, hGM-CSF was also partitioned primarily in the top phase with a yield of 45.66% andK _hGM-CSF of 7.64 after 2 h of incubation at room temperature.     

Rotavirus-like particles primary recovery from insect cells in aqueous two-phase systems

Virus-like particles have a wide range of applications, including vaccination, gene therapy, and even as nanomaterials. Their successful utilization depends on the availability of selective and scalable methods of product recovery and purification that integrate effectively with upstream operations. In this work, a strategy based on aqueous two phase system (ATPS) was developed for the recovery of double-layered rotavirus-like particles (dlRLP) produced by the insect cell-baculovirus expression system. Polyethylene glycol (PEG) molecular mass, PEG and salt concentrations, and volume ratio (Vr, volume of top phase/volume of bottom phase) were evaluated in order to determine the conditions where dlRLP and contaminants concentrated to opposite phases. Two-stage ATPS consisting of PEG 400-phosphate with a Vr of 13.0 and a tie-line length (TLL) of 35% (w/w) at pH 7.0 provided the best conditions for processing highly concentrated crude extract from disrupted cells (dlRLP concentration of 5 microg/mL). In such conditions intracellular dlRLP accumulated in the top phase (recovery of 90%), whereas cell debris remained in the interface. Furthermore, dlRLP from culture supernatants accumulated preferentially in the interface (recovery of 82%) using ATPS with a Vr of 1.0, pH of 7.0, PEG 3350 (10.1%, w/w) and phosphate (10.9%, w/w). The purity of dlRLP from culture supernatant increased up to 55 times after ATPS. The use of ATPS resulted in a recovery process that produced dlRLP with a purity between 6 and 11% and an overall product yield of 85% (w/w), considering purification from intracellular and extracellular dlRLP. Overall, the strategy proposed in this study is simpler than traditional methods for recovering dlRLP, and represents a scalable and economically viable alternative for production processes of vaccines against rotavirus infection with significant scope for generic commercial application.     

Purification and in situ immobilization of lipase from of a mutant of Trichosporon laibacchii using aqueous two-phase systems

The crude intracellular lipase (cell homogenate) from Trichosporon laibacchii was subjected to partial purification by aqueous two-phase system (ATPS) and then in situ immobilization by directly adding diatomites as carrier to the top PEG-rich phase of ATPS. A partition study of lipase in the ATPS formed by polyethylene glycol–potassium phosphate has been performed. The influence of system parameters such as molecular weight of PEG, system phase composition and system pH on the partitioning behaviour of lipase was evaluated. The ATPS consisting of PEG 4000 (12%) and potassium phosphate (K₂HPO₄, 13%) resulted in partition of lipase to the PEG-rich phase with partition coefficient 7.61, activity recovery 80.4%, and purification factor of 5.84 at pH of 7.0 and 2.0% NaCl. Moreover, the in situ immobilization of lipase in PEG phase resulted in a highest immobilized lipase activity of 1114.6 U g^?1. The above results show that this novel lipase immobilization procedure which couples ATPS extract and enzyme immobilization is cost-effective as well as time-saving. It could be potentially useful technique for the purification and immobilization of lipase.     

Coupling purification and in situ immobilization process of monoclonal antibodies to clenbuterol for immunosensor application

Clenbuterol (CL), which promotes the growth of muscular tissue and the reduction of body fat in pigs and cattle, has been confirmed to be a potential hazard to human health. In this study, a monoclonal antibody to clenbuterol (CL mAb) from a hybridoma culture supernatant was purified by an aqueous two-phase system (ATPS) at different polyethylene glycol (PEG) concentrations, PEG molecular weights, pH values, and NaCl concentrations. Then the CL mAb was immobilized in situ by directly adding polystyrene microspheres (PSMSs) into a PEG phase containing CL mAb. Using the immobilized antibody, an immunosensor was constructed to detect the CL residues in pork samples. The results showed that using an ATPS composed of 15% (w/w) PEG6000, 15% (w/w) phosphate, and 15% (w/w) NaCl at pH 8.0, the partition coefficient was 7.24, the activity recovery was 87.86%, and the purification fold was 2.88. The PEG–CL mAb–PSMS retained approximately 98% of its initial activity after 30-ml phosphate buffer (PBS) washings. After 30 days of storage, the CL mAb–PSMS lost nearly 75% of its activity, whereas the PEG–CL mAb–PSMS retained as much as 95% of its initial activity. Furthermore, the constructed immunosensor obtained recoveries of 90.5 to 102.6% when applied to pork samples spiked with CL.     

Technical improvement in the purification of enzymes from red algae using an aqueous two-phase partitioning system

The effective elimination of phycobiliproteins from crude enzyme preparation of the red alga Caloglossa continua (Okamura) King et Puttock (Ceramiales, Florideophyceae) was investigated in an aqueous two‐phase partitioning system (ATPS) by changing the concentrations of polyethylene glycol (PEG) and ammonium sulfate (AS). The phycobiliproteins shifted from the AS‐rich lower phase to the PEG‐rich upper phase in high PEG and AS concentrations. The best ATPS condition for the elimination of phycobiliproteins from the lower phase was obtained by the combination of 20% (weight/volume; w/v) PEG and 16% (w/v) AS. However, the recovery of aldolase and mannitol‐1‐phos‐phatase activities was significantly reduced. For purification of the enzymes, a combination of 15% (w/v) PEG and 16% (w/v) AS was the best ATPS condition, because a high specific activity and recovery of the enzymes were obtained. Under these conditions, 98% of the phycobiliproteins were removed from the lower phase. Therefore, the ATPS proved to be a very useful method as a first step in the purification of enzymes from red algae.     

Simplified two-stage method to B-phycoerythrin recovery from Porphyridium cruentum

A simplified two-stage method for B-phycoerythrin (BPE) recovery from Porphyridium cruentum was developed. The proposed method involved cell disruption by sonication and primary recovery by aqueous two-phase partition. The evaluation of two different methods of cell disruption and the effect of increasing concentration of cell homogenate from P. cruentum culture upon aqueous two-phase systems (ATPS) performance was carried out to avoid the use of precipitation stages. Cell disruption by sonication proved to be superior over manual maceration since a five time increase in the concentration of B-phycoerythrin release was achieved. An increase in the concentration of crude extract from disrupted P. cruentum cells loaded to the ATPS (from 10 to 40%, w/w) proved to be suitable to increase the product purity and benefited the processing of highly concentrated disrupted extract. Kinetics studies of phase separation performed suggested the use of batch settlers with height/diameter (H/D) ratio less than one to reduce the necessary time for the phases to separate. The proposed ATPS stage comprising of 29% (w/w) polyethylene glycol (PEG) 1000g/mol, 9% (w/w) potassium phosphate, tie-line length (TLL) of 45% (w/w), volume ratio (V(R)) of 4.5, pH 7.0 and 40% (w/w) crude extract loaded in a batch settler with H/D ratio of 0.5 proved to be efficient for the recovery of 90% of B-phycoerythrin at the top PEG-rich phase. The purity of B-phycoerythrin increased up to 4.0 times after the two-stage method. The results reported here demonstrate the potential implementation of a strategy to B-phycoerythrin recovery with a purity of 3.2 (estimated by the absorbance relation of 545-280nm) from P. cruentum.     

Aqueous two-phase extraction for the purification of alkaline agarases from culture extracts of Pseudomonas aeruginosa AG LSL-11

The agarases were purified for the first time an using aqueous two-phase system (ATPS) consisting of polyethylene glycol (PEG) and phosphate salt. The three extracellular, alkaline agarases produced by Pseudomonas aeruginosa AG LSL-11 were efficiently extracted into the top PEG-rich layer. The influencing factors on the partition of agarases--molecular weight of the PEG, system pH, system temperature, and NaCl concentration--were investigated. All the factors were found to have a significant effect on the partition of agarases except NaCl. The optimal ATPS parameters for the partitioning and purification of agarases were found to be 12% PEG 600 and 11.9% (w/w) phosphate salt at pH 8.0 and 4°C. All three agarases were concentrated in the top PEG phase with 6.19-fold purity and 71.21% recovery. The ATPS was found to be more convenient and economical than the conventional ion-exchange chromatography (IEC) method for extraction of three agarases and could be significantly employed for the purification of agarases from fermentation broth.     

Two-step process for initial capture of plasmid DNA and partial removal of RNA using aqueous two-phase systems

In this paper, a two-step process for initial capture of plasmid DNA (pDNA) and partial removal of RNA using polyethylene glycol (PEG) and di-potassium hydrogen phosphate aqueous two-phase systems (ATPS) has been investigated. A Kühni-type ATPS extraction column was prepared with 50 ml (12% (w/w) PEG 1450, 12% (w/w) phosphate) of stationary phase and loaded with crude mobile phase (26% (w/w) PEG 1450, 4% (w/w) phosphate and 70% (w/w) lysate) at a flow rate of 6 ml min⁻¹ at an impeller speed of 200 rpm. The experiment was terminated after 100 min, and after complete resettling of the phases, 45 ml of stationary phase was harvested. During a subsequent second extraction step contained 18% (w/w) PEG 300 and 14% (w/w) phosphate, a proportion of RNA, which was also concentrated during the column process, was removed. It was demonstrated that the recovery of pDNA in the second bottom phase was 89.4%, which was similar to the initial recovery after column extraction (92.1%).     

Potential Aqueous Two‐Phase Processes for the Primary Recovery of Colored Protein from Microbial Origin

The primary recovery of c‐phycocyanin and b‐phycoerythrin from Spirulina maxima and Porphyridium cruentum, respectively, using an established extraction strategy was selected as a practical model system to study the generic application of polyethylene glycol (PEG)‐phosphate aqueous two‐phase systems (ATPS). The generic practical implementation of ATPS extraction was evaluated for the recovery of colored proteins from microbial origin. A comparison of the influence of system parameters, such as PEG molecular mass, concentration of PEG as well as salt, system pH and volume ratio, on the partition behavior of c‐phycocyanin and b‐phycoerythrin was carried out to determine under which conditions target colored protein and contaminants concentrate to opposite phases. One‐stage processes are proposed for the primary recovery of the colored proteins. PEG1450‐phosphate ATPS extraction (volume ratio (V_R) equal to 0.3, tie‐line length (TLL) of 34 % w/w and system pH 7.0) for the recovery of c‐phycocyanin from Spirulina maxima resulted in a primary recovery process that produced a protein purity of 2.1 ± 0.2 (defined as the relationship of 620 nm to 280 nm absorbance) and a product yield of 98 % [w/w]. PEG1000‐phosphate ATPS extraction (i.e., V_R = 1.0, PEG 1000, TLL 50 % w/w and system pH 7.0) was preferred for the recovery of b‐phycoerythrin from Porphyridium cruentum, which resulted in a protein purity of 2.8 ± 0.2 (defined as the relationship of 545 nm to 280 nm absorbance) and a product yield of 82 % [w/w]. The purity of c‐phycocyanin and b‐phycoerythrin from the crude extract increased 3‐ and 4‐fold, respectively, after ATPS. The results reported herein demonstrated the benefits of the practical generic application of ATPS for the primary recovery of colored proteins from microbial origin as a first step for the development of purification processes.     

AQUEOUS TWO-PHASE EXTRACTION FOR THE PURIFICATION OF ALKALINE AGARASES FROM CULTURE EXTRACTS OF Pseudomonas aeruginosa AG LSL-11

The agarases were purified for the first time an using aqueous two-phase system (ATPS) consisting of polyethylene glycol (PEG) and phosphate salt. The three extracellular, alkaline agarases produced by Pseudomonas aeruginosa AG LSL-11 were efficiently extracted into the top PEG-rich layer. The influencing factors on the partition of agarases—molecular weight of the PEG, system pH, system temperature, and NaCl concentration—were investigated. All the factors were found to have a significant effect on the partition of agarases except NaCl. The optimal ATPS parameters for the partitioning and purification of agarases were found to be 12% PEG 600 and 11.9% (w/w) phosphate salt at pH 8.0 and 4°C. All three agarases were concentrated in the top PEG phase with 6.19-fold purity and 71.21% recovery. The ATPS was found to be more convenient and economical than the conventional ion-exchange chromatography (IEC) method for extraction of three agarases and could be significantly employed for the purification of agarases from fermentation broth.     

ATPS applied to extraction of small molecules - polycetides - and simultaneous clarification of culture media with filamentous microorganisms

Aqueous two-phase systems (ATPS) were applied for extraction of small molecules (polycetides) - retamycin, an anthracyclin, and two red pigments, rubropunctamin and monascorubramin - from the whole culture media of Streptomyces olindensis and Monascus purpureus. ATPS allows, in one step, the separation of the small hydrophobic molecules in the PEG rich phase, from the filamentous microorganisms, which remains in the salt phase. Through experimental designs, the main variables and their levels were defined, as follows: for retamycin extraction, PEG 6000 (10%, w/w), phosphate at 20% (w/w) and pH 6.0 led to the higher partition coefficient, K(r) = 8.2, and yield = 91.3%; for red pigments, the statistical analysis indicate PEG 6000 (20%, w/w) and phosphate at 15% (w/w), for a high partition coefficient, (K(pig) = 113 and 150).     

Separation of recombinant β-glucuronidase from transgenic tobacco by aqueous two-phase extraction

Transgenic plants hold many promises as viable production hosts for therapeutic recombinant proteins. Many efforts have been devoted to increase the expression level of the proteins, but the efforts for developing economic processes to purify those proteins are lacking. In this report, aqueous two-phase extraction (ATPE) was investigated as an alternative for the separation of an acidic recombinant protein, β-glucuronidase (rGUS), from transgenic tobacco. Screening experiments by fractional factorial designs showed that PEG concentration and ionic strength of the system significantly affected the partitioning of native tobacco proteins and GUS. Response surface methodology was used to determine an optimized aqueous two-phase system for the purification of rGUS from transgenic tobacco. In a 13.4% (w/w) PEG 3400/18% (w/w) potassium phosphate system, 74% of the rGUS was recovered in the top PEG-rich phase while more than 90% of the native tobacco proteins were removed in the interphase and the bottom phase. A purification factor of about 20 was achieved in this process. The most important impurity from tobacco, Rubisco, was largely removed from the rGUS in the recovered phase.     

Aqueous two-phase systems extraction of alpha-toxin from Clostridium perfringens type A

Two sequential half-fraction designs were applied to studying the alpha-toxin partition produced by Clostridium perfringens type A in aqueous two phase systems (ATPS), as a function of four factors: PEG molar mass and concentration, phosphate concentration and pH. The highest purification factor, yield and partition coefficient results were obtained with PEG 8000 (15%, w/w), phosphate at 20% (w/w) and pH 8.0. This system allows, in a single step, an alpha-toxin purification of 4.6-fold with final activity yield of 230% and partition coefficient of 113.9 in the PEG rich phase.     

Recovery of laccase from the residual compost of Agaricus bisporus in aqueous two-phase systems

The potential use of aqueous two-phase systems (ATPS) to establish a viable protocol for the recovery of laccase from the residual compost of Agaricus bisporus was evaluated. The evaluation of system parameters such as poly (ethylene glycol) (PEG) molecular mass, concentration of PEG as well as salt and system pH was carried out to determine under which conditions the laccase concentrates predominantly to the top PEG-rich phase. PEG 1000–phosphate ATPS proved to be suitable for the primary recovery of laccase. An extraction ATPS stage comprising volume ratio equal to 1.0, PEG 1000 18.2% (w/w), phosphate 15.0% (w/w), system pH of 7.0 and loaded with 5% (w/w) of crude extract from residual compost allowed the laccase recovery. The use of ATPS resulted in one-single primary recovery stage process that produced an overall yield of 95%. The results reported here demonstrated the potential application of ATPS for the valorisation of residual material and the potential establishment of a downstream process to obtain value added products with commercial application.     

Purification of lactic acid dehydrogenase from crude bovine heart extract by pH-peak focusing counter-current chromatography

pH-peak focusing counter-current chromatography (CCC) was applied to the purification of lactic acid dehydrogenase (LDH) from a crude bovine heart extract using a cross-axis coil planet centrifuge (CPC). The experiment was performed with two sets of polymer phase systems composed of 16% (w/w) polyethylene glycol (PEG) 1000-12.5% (w/w) potassium phosphate buffer and 15% (w/w) PEG 1540-15% (w/w) ammonium sulfate each at various pH values. The best result was achieved from the PEG 1540-ammonium sulfate polymer phase system by adding a retainer (10 mM acetic acid) to the upper stationary phase and an eluter (100 mM sodium hydroxide) to the lower mobile phase. At a flow-rate of 0.5 ml/min, LDH was eluted as a sharp peak which was well resolved from other proteins. Collected fractions were analyzed by the LDH enzymatic activity and by sodium dodecyl sulfate-polyacrylamide slab gel electrophoresis to detect contaminated proteins. LDH was purified directly from crude bovine heart extract in a concentrated state.     

Evaluating aqueous two-phase systems for Yarrowia lipolytica extracellular lipase purification

In this study an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) and potassium phosphate was tested for the purification of lipase from Yarrowia lipolytica IMUFRJ 50682. Ultrafiltration and precipitation with acetone and kaolin were also used as traditional comparison methods Ultrafiltration was a good method with a purification factor of 6.55, but protease was also purified in this extract. For the precipitation with acetone and kaolin lower values of lipase and protease activity were found in relation to the original crude enzyme extract. Under the best conditions of ATPS (pH 6 and 4 °C), the purification fold was greater than 40 and selectivity was almost 500. Lipase was recovered in the salty phase which makes it easier to purify it. The optimum pH and temperature ranges for purified lipase with this system was 6–7 and 35–40 °C, respectively. Lipase thermostability was increased in relation to crude extract after the purification with the PEG/phosphate buffer system for temperatures lower than 50 °C. All enzyme extracts showed good stability to a wide pH range. Y. lipolytca lipase was successfully purified by using ATPS in a single downstream processing step and presented good process characteristics after this treatment.     

Purification and Characterization of Polyphenol Oxidase From Waste Potato Peel by Aqueous Two-Phase Extraction

Potato peel from food industrial waste is a good source of polyphenol oxidase (PPO). This work illustrates the application of an aqueous two-phase system (ATPS) for the extraction and purification of PPO from potato peel. ATPS was composed of polyethylene glycol (PEG) and potassium phosphate buffer. Effect of different process parameters, namely, PEG, potassium phosphate buffer, NaCl concentration, and pH of the system, on partition coefficient, purification factor, and yield of PPO enzyme were evaluated. Response surface methodology (RSM) was utilized as a statistical tool for the optimization of ATPS. Optimized experimental conditions were found to be PEG1500 17.62% (w/w), potassium phosphate buffer 15.11% (w/w), and NaCl 2.08 mM at pH 7. At optimized condition, maximum partition coefficient, purification factor, and yield were found to be 3.7, 4.5, and 77.8%, respectively. After partial purification of PPO from ATPS, further purification was done by gel chromatography where its purity was increased up to 12.6-fold. The purified PPO enzyme was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), followed by K_m value 3.3 mM, and V_max value 3333 U/mL, and enzyme stable ranges for temperature and pH of PPO were determined. These results revealed that ATPS would be an attractive option for obtaining purified PPO from waste potato peel.     

Bioprocess intensification: a potential aqueous two-phase process for the primary recovery of B-phycoerythrin from Porphyridium cruentum

A process for the primary recovery of B-phycoerythrin from Porphyridium cruentum exploiting aqueous two-phase systems (ATPS) was developed in order to reduce the number of unit operations and benefit from an increased yield of the protein product. The evaluation of system parameters such as poly(ethylene glycol) (PEG) molecular mass, concentration of PEG as well as salt, system pH and volume ratio was carried out to determine under which conditions the B-phycoerythrin and contaminants concentrate to opposite phases. PEG 1450-phosphate ATPS proved to be suitable for the recovery of B-phycoerythrin because the target protein concentrated to the top phase whilst the protein contaminants and cell debris concentrated in the bottom phase. An extraction ATPS stage comprising volume ratio (Vr) equal to 1.0, PEG 1450 24.9% (w/w), phosphate 12.6% (w/w) and system pH of 8.0 allowed B-phycoerythrin recovery with a purity of 2.9 (estimated as the relation of the 545-280 nm absorbances). The use of ATPS resulted in a primary recovery process that produced a protein purity of 2.9 +/- 0.2 and an overall product yield of 77.0% (w/w). The results reported demonstrated the practical implementation of ATPS for the design of a primary recovery process as a first step for the commercial purification of B-phycoerythrin produced by P. cruentum.     

Direct purification of Burkholderia Pseudomallei lipase from fermentation broth using aqueous two-phase systems

An aqueous two-phase purification process was employed for the recovery of Burkholderia pseudomallei lipase from fermentation broth. The partition behavior of B. pseudomallei lipase was investigated with various parameters such as phase composition, tie-line length (TLL), volume ratio (V_R), sample loading, system pH, and addition of neutral salts. Optimum conditions for the purification of lipase were obtained in polyethylene glycol (PEG) 6000-potassium phosphate system using TLL of 42.2% (w/w), with VR of 2.70, and 1% (w/w) NaCl addition at pH 7 for 20% (w/w) crude load. Based on this system, the purification factor of lipase was enhanced to 12.42 fold, with a high yield of 93%. Hence, the simplicity and effectiveness of aqueous two-phase systems (ATPS) in the purification of lipase were proven in this study.