Carbon Solving Carbon's Problems: Recent Progress of Nanostructured Carbon‐Based Catalysts for the Electrochemical Reduction of CO2

The electrochemical reduction of CO₂ to useful molecules offers an elegant technological solution to current energy security and sustainability issues because it sequesters carbon from the atmosphere, provides an energy storage solution for intermittent renewable sources, and can be used to produce fuels and industrial chemicals. Nanostructured carbon materials have been extensively used to catalyse some key electrochemical processes because of their excellent electrical conductivity, chemical stability, and abundant active sites. This progress report focuses on nanostructured carbon materials, namely graphene materials, carbon nanotubes, porphyrin materials, nanodiamond, and glassy carbon, which have recently shown promise as high performing CO₂ reduction electrocatalysts and supports. Along with discussion regarding materials synthesis, structural characterisation, and electrochemical performance characterisation techniques used, this report will discuss the findings of recent computational CO₂RR studies which have been key to elucidating active sites and reaction mechanisms, and developing strategies to break conventional scaling relationships. Lastly, challenges and future perspective of these carbon‐based materials for CO₂ reduction applications will be given. Much work is still required to realise the commercial viability of the technology, but advanced experimental techniques coupled with theoretical calculations are expected to facilitate future development of the technology.     

Fundamental Understanding and Material Challenges in Rechargeable Nonaqueous Li–O2 Batteries: Recent Progress and Perspective

Energy storage challenges have triggered growing interest in various battery technologies and electrocatalysis. As a particularly promising variety, the Li–O₂ battery with an extremely high energy density is of great significance, offering tremendous opportunities to improve cell performance via understanding catalytic mechanisms and the exploration of new materials. Furthermore, focus on nonaqueous electrolyte‐based Li–O₂ batteries has markedly intensified since there could be a higher probability of commercialization, compared to that of solid‐state or aqueous electrolytes. The recent advancements of the nonaqueous Li–O₂ battery in terms of fundamental understanding and material challenges, including electrolyte stability, water effect, and noncarbon cathode materials are summarized in this review. Further, the current status of water impact on discharge products, possible mechanisms, and parasitic reactions in nonaqueous electrolytes are reviewed for the first time. The key challenges of noncarbon oxygen electrode materials, such as noble metals and metal oxides‐based cathodes, transition metals, transition metal compounds (carbides, oxides) based cathodes as well as noncarbon supported catalysts are discussed. This review concludes with a perspective on future research directions for nonaqueous Li–O₂ batteries.     

Graphene‐Based Nanocomposites for Energy Storage

Since the first report of using micromechanical cleavage method to produce graphene sheets in 2004, graphene/graphene‐based nanocomposites have attracted wide attention both for fundamental aspects as well as applications in advanced energy storage and conversion systems. In comparison to other materials, graphene‐based nanostructured materials have unique 2D structure, high electronic mobility, exceptional electronic and thermal conductivities, excellent optical transmittance, good mechanical strength, and ultrahigh surface area. Therefore, they are considered as attractive materials for hydrogen (H₂) storage and high‐performance electrochemical energy storage devices, such as supercapacitors, rechargeable lithium (Li)‐ion batteries, Li–sulfur batteries, Li–air batteries, sodium (Na)‐ion batteries, Na–air batteries, zinc (Zn)–air batteries, and vanadium redox flow batteries (VRFB), etc., as they can improve the efficiency, capacity, gravimetric energy/power densities, and cycle life of these energy storage devices. In this article, recent progress reported on the synthesis and fabrication of graphene nanocomposite materials for applications in these aforementioned various energy storage systems is reviewed. Importantly, the prospects and future challenges in both scalable manufacturing and more energy storage‐related applications are discussed.     

From Lithium‐Oxygen to Lithium‐Air Batteries: Challenges and Opportunities

Lithium ‐ air batteries have become a focus of research on future battery technologies. Technical issues associated with lithium‐air batteries, however, are rather complex. Apart from the sluggish oxygen reaction kinetics which demand efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts, issues are also inherited from the nature of an open battery system and the use of reactive metal lithium as anode. Lithium‐air batteries, which exchange oxygen directly with ambient air, face more challenges due to the additional oxidative agents of moisture, carbon dioxide, etc. which degrade the metal lithium anode, deteriorating the performance of the batteries. In order to improve the cycling performance one must hold a full picture of lithium‐oxygen electrochemistry in the presence of carbon dioxide and/or moisture and fully understand the fundamentals of chemistry reactions therein. Recent advances in the exploration of the effect of moisture and CO₂ contaminants on Li‐O₂ batteries are reviewed, and the mechanistic understanding of discharge/charge process in O₂ at controlled level of moisture and/or CO₂ are illustrated. Prospects for development opportunities of Li‐air batteries, insight into future research directions, and guidelines for the further development of rechargeable Li‐air batteries are also given.     

Rational Design of Nanocatalysts with Nonmetal Species Modification for Electrochemical CO2 Reduction

Converting CO₂ to valuable carbonaceous fuels and chemicals via electrochemical CO₂ reduction by using renewable energy sources is considered to be a scalable strategy with substantial environmental and economic benefits. One of the challenges in this field is to develop nanocatalysts with superior electrocatalytic activity and selectivity for targeted products. Nonmetal species modification of nanocatalysts is of great significance for the construction of distinctive active sites to overcome the kinetic limitations of CO₂ reduction. These types of modification enable the efficient control of the selectivity and significantly decrease the reaction overpotential. Herein, a comprehensive review of the recent progress of nonmetal species modification of nanocatalysts for electrochemical CO₂ reduction is presented. After discussing some fundamental parameters and the basic principles of CO₂ reduction, including possible reaction pathways in light of theoretical modeling and experiments, the identification of active sites and elucidation of reaction mechanisms are emphasized for unraveling the role of nonmetal species modification, such as heteroatom incorporation, organic molecule decoration, electrolyte engineering, and single‐atom engineering. In the final section, future challenges and constructive perspectives are provided, facilitating the accelerated advancement of mechanism research and practical applications of green carbon cycling.     

Highly Stable Supercapacitors with Conducting Polymer Core‐Shell Electrodes for Energy Storage Applications

Conducting polymers such as polyaniline (PAni) show a great potential as pseudocapacitor materials for electrochemical energy storage applications. Yet, the cycling instability of PAni resulting from structural alteration is a major hurdle to its commercial application. Here, the development of nanostructured PAni–RuO₂ core–shell arrays as electrodes for highly stable pseudocapacitors with excellent energy storage performance is reported. A thin layer of RuO₂ grown by atomic layer deposition (ALD) on PAni nanofibers plays a crucial role in stabilizing the PAni pseudocapacitors and improving their energy density. The pseudocapacitors, which are based on optimized PAni–RuO₂ core–shell nanostructured electrodes, exhibit very high specific capacitance (710 F g^?1 at 5 mV s^?1) and power density (42.2 kW kg^?1) at an energy density of 10 Wh kg^?1. Furthermore, they exhibit remarkable capacitance retention of ≈88% after 10 000 cycles at very high current density of 20 A g^?1, superior to that of pristine PAni‐based pseudocapacitors. This prominently enhanced electrochemical stability successfully demonstrates the buffering effect of ALD coating on PAni, which provides a new approach for the preparation of metal‐oxide/conducting polymer hybrid electrodes with excellent electrochemical performance.     

Simultaneous Achieving of High Faradaic Efficiency and CO Partial Current Density for CO2 Reduction via Robust,Noble‐Metal‐Free Zn Nanosheets with Favorable Adsorption Energy

Electrocatalytic CO₂ reduction to fuels is considered a promising strategy for the sustainable carbon cycle. However, the improvement of the catalytic performance of CO₂ electrocatalysts still poses many challenges, especially achieving the large partial current density of product and high faradaic efficiency simultaneously, which are essential for future applications of the electrochemical CO₂ reduction reaction. In response, herein, an in situ porous Zn catalyst is prepared and exhibits high faradaic efficiency and large CO partial current density at the same time, benefiting from the porous architecture with increased exposure and accessibility of active sites. Furthermore, density functional theory calculations demonstrate that the high faradaic efficiency is attributed to the favorable adsorption energy of the key intermediate, which promotes CO₂ electroreduction to CO.     

CO2生物转化关键酶固定体系构筑研究进展与挑战

酶催化CO₂还原制备高值化学品对缓解全球环境和能源危机具有重要意义,利用甲酸脱氢酶(formate dehydrogenase,FDH)或多酶级联还原CO₂制备甲酸/甲醇具有选择性高、条件温和的优势,但关键酶活性低、稳定性差和重复利用率低的问题限制了其规模化应用,酶的固定化为这些问题提供了有效解决方案。本文总结了近年来利用膜、无机材料、金属有机框架和共价有机框架等载体对酶进行固定化的研究进展,阐释了不同固定材料和固定方式的特点和优势;进一步总结了固定化酶与电催化或光催化耦联反应体系对CO₂还原的协同效果及应用,同时指出酶固定化技术和耦联反应体系目前存在的问题并对其发展前景进行了展望。     

Classification and enzyme kinetics of formate dehydrogenases for biomanufacturing via CO2 utilization

The reversible interconversion of formate (HCOO^?) and carbon dioxide (CO₂) is catalyzed by formate dehydrogenase (FDH, EC 1.17.1.9). This enzyme can be used as a first step in the utilization of CO₂ as carbon substrate for production of high-in-demand chemicals. However, comparison and categorization of the very diverse group of FDH enzymes has received only limited attention. With specific emphasis on FDH catalyzed CO₂ reduction to HCOO^?, we present a novel classification scheme for FDHs based on protein sequence alignment and gene organization analysis. We show that prokaryotic FDHs can be neatly divided into six meaningful sub-types. These sub-types are discussed in the context of overall structural composition, phylogeny of the gene segment organization, metabolic role, and catalytic properties of the enzymes. Based on the available literature, the influence of electron donor choice on the efficacy of FDH catalyzed CO₂ reduction is quantified and compared. This analysis shows that methyl viologen and hydrogen are several times more potent than NADH as electron donors. Hence, the new FDH classification scheme and the electron donor analysis provide an improved base for developing FDH-facilitated CO₂ reduction as a viable step in the utilization of CO₂ as carbon source for green production of chemicals.     

2D Assembly of Confined Space toward Enhanced CO2 Electroreduction

Rational design of electrocatalysts toward efficient CO₂ electroreduction has the potential to reduce carbon emission and produce value‐added chemicals. In this work, a strategy of constructing 2D confined‐space as molecular reactors for enhanced electrocatalytic CO₂ reduction selectivity is demonstrated. Highly ordered 2D nanosheet lamella assemblies are achieved via weak molecular interaction of atomically thin titania nanosheets, a variety of cationic surfactants, and SnO₂ nanoparticles. The interlayer spacings can be tuned from 0.9 to 3.0 nm by using different surfactant molecules. These 2D assemblies of confined‐space catalysts exhibit a strong size dependence of CO₂ electroreduction selectivity, with a peak Faradaic efficiency of 73% for formate production and excellent electrochemical stability at an optimal interspacing of ≈2.0 nm. This work suggests great potential for constructing new molecular‐size reactors, for highly selective electrocatalytic CO₂ reduction.     

Spatially Confined MnO2 Nanostructure Enabling Consecutive Reversible Charge Transfer from Mn(IV) to Mn(II) in a Mixed Pseudocapacitor‐Battery Electrode

Mn oxides are highly important electrode materials for aqueous electrochemical energy storage devices, including batteries and supercapacitors. Although MnO₂ is a promising pseudocapacitor material because of its outstanding rate and capacity performance, its electrochemical instability in aqueous electrolyte prevents its use at low electrochemical potential. Here, the possibility of stabilizing MnO₂ electrode using SiO₂‐confined nanostructure is demonstrated. Remarkably, an exceptionally good electrochemical stability under large negative polarization in aqueous (Li₂SO₄) electrolyte, usually unattainable for MnO₂‐based electrode, is achieved. Even more interestingly, this MnO₂–SiO₂ nanostructured composite exhibits unique mixed pseudocapacitance‐battery behaviors involving consecutive reversible charge transfer from Mn(IV) to Mn(II), which enable simultaneous high‐capacity and high‐rate characteristics, via different charge‐transfer kinetic mechanisms. This suggests a strategy to design and stabilize electrochemical materials that are comprised of intrinsically unstable but high‐performing component materials.     

In-Situ Constructuring of Copper-Doped Bismuth Catalyst for Highly Efficient CO2 Electrolysis to Formate in Ampere-Level

CO₂ electrochemical reduction (CO₂RR) can mitigate environmental issues while providing valuable products, yet challenging in activity, selectivity, and stability. Here, a CuS-Bi₂S₃ heterojunction precursor is reported that can in situ reconstruct to Cu-doped Bismuth (CDB) electrocatalyst during CO₂RR. The CDB exhibits an industrial-compatible current density of −1.1 A cm⁻² and a record-high formate formation rate of 21.0 mmol h⁻¹ cm⁻² at −0.86 V versus the reversible hydrogen electrode toward CO₂RR to formate, dramatically outperforming currently reported catalysts. Importantly, the ultrawide potential region of 1050 mV with high formate Faradaic efficiency of over 90% and superior long-term stability for more than 100 h at −400 mA cm⁻² can also be realized. Experimental and theoretical studies reveal that the remarkable CO₂RR performance of CDB results from the doping effect of Cu which optimizes adsorption of the *OCHO and boosts the structural stability of metallic bismuth catalyst. This study provides valuable inspiration for the design of element-doping electrocatalysts to enhance catalytic activity and durability.     

Efficient CO2-Reducing Activity of NAD-Dependent Formate Dehydrogenase from Thiobacillus sp. KNK65MA for Formate Production from CO2 Gas

NAD-dependent formate dehydrogenase (FDH) from Candida boidinii (CbFDH) has been widely used in various CO₂-reduction systems but its practical applications are often impeded due to low CO₂-reducing activity. In this study, we demonstrated superior CO₂-reducing properties of FDH from Thiobacillus sp. KNK65MA (TsFDH) for production of formate from CO₂ gas. To discover more efficient CO₂-reducing FDHs than a reference enzyme, i.e. CbFDH, five FDHs were selected with biochemical properties and then, their CO₂-reducing activities were evaluated. All FDHs including CbFDH showed better CO₂-reducing activities at acidic pHs than at neutral pHs and four FDHs were more active than CbFDH in the CO₂ reduction reaction. In particular, the FDH from Thiobacillus sp. KNK65MA (TsFDH) exhibited the highest CO₂-reducing activity and had a dramatic preference for the reduction reaction, i.e., a 84.2-fold higher ratio of CO₂ reduction to formate oxidation in catalytic efficiency (k _cat/K _B) compared to CbFDH. Formate was produced from CO₂ gas using TsFDH and CbFDH, and TsFDH showed a 5.8-fold higher formate production rate than CbFDH. A sequence and structural comparison showed that FDHs with relatively high CO₂-reducing activities had elongated N- and C-terminal loops. The experimental results demonstrate that TsFDH can be an alternative to CbFDH as a biocatalyst in CO₂ reduction systems.     

Rational Design of Metal‐Organic Framework Derived Hollow NiCo2O4 Arrays for Flexible Supercapacitor and Electrocatalysis

Metal‐organic frameworks (MOFs) are promising porous precursors for the construction of various functional materials for high‐performance electrochemical energy storage and conversion. Herein, a facile two‐step solution method to rational design of a novel electrode of hollow NiCo₂O₄ nanowall arrays on flexible carbon cloth substrate is reported. Uniform 2D cobalt‐based wall‐like MOFs are first synthesized via a solution reaction, and then the 2D solid nanowall arrays are converted into hollow and porous NiCo₂O₄ nanostructures through an ion‐exchange and etching process with an additional annealing treatment. The as‐obtained NiCo₂O₄ nanostructure arrays can provide rich reaction sites and short ion diffusion path. When evaluated as a flexible electrode material for supercapacitor, the as‐fabricated NiCo₂O₄ nanowall electrode shows remarkable electrochemical performance with excellent rate capability and long cycle life. In addition, the hollow NiCo₂O₄ nanowall electrode exhibits promising electrocatalytic activity for oxygen evolution reaction. This work provides an example of rational design of hollow nanostructured metal oxide arrays with high electrochemical performance and mechanical flexibility, holding great potential for future flexible multifunctional electronic devices.     

Doped‐MoSe2 Nanoflakes/3d Metal Oxide–Hydr(Oxy)Oxides Hybrid Catalysts for pH‐Universal Electrochemical Hydrogen Evolution Reaction

Clean hydrogen production is highly promising to meet future global energy demands. The design of earth‐abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments is needed, in order to enable practical applications. Here, the authors report a non‐noble 3d metal Cl‐chemical doping of liquid phase exfoliated single‐/few‐layer flakes of MoSe₂ for creating MoSe₂/3d metal oxide–hydr(oxy)oxide hybrid HER‐catalysts. It is proposed that the electron‐transfer from MoSe₂ nanoflakes to metal cations and the chlorine complexation‐induced neutralization, as well as the in situ formation of metal oxide–hydr(oxy)oxides on the MoSe₂ nanoflakes' surface, tailor the proton affinity of the catalysts, increasing the number and HER‐kinetics of their active sites in both acidic and alkaline electrolytes. The electrochemical coupling between doped‐MoSe₂/metal oxide–hydr(oxy)oxide hybrids and single‐walled carbon nanotubes heterostructures further accelerates the HER process. Lastly, monolithic stacking of multiple heterostructures is reported as a facile electrode assembly strategy to achieve overpotential for a cathodic current density of 10 mA cm^?2 of 0.081 and 0.064 V in 0.5 m H₂SO₄ and 1 m KOH, respectively. This opens up new opportunities to address the current density versus overpotential requirements targeted in pH‐universal hydrogen production.     

CO2‐Mediated H2 Storage‐Release with Nanostructured Catalysts: Recent Progresses,Challenges, and Perspectives

It has increasingly become clear that economic growth worldwide based on fossil fuel energy supply cannot be sustained; thus, alternative, renewable energy sources and carriers must be urgently developed to maintain growth. Dihydrogen (H₂), which can produce energy without generating environmental pollutants, can play a major role in this endeavor. However, to use H₂ in renewable energy systems, systems and materials that can store and transport it, or convert it into easier‐to‐handle/transport synthetic fuels, need to be developed. In this article, first, many of the issues related to both homogeneous and heterogeneous catalysts that are being developed to help H₂'s use as energy carrier are discussed. More focus is then given to heterogeneous nanocatalysts that are developed for reversible CO₂‐mediated hydrogenation and dehydrogenation reactions involving chemical hydrogen carriers and delivery systems, mainly formic acid/CO₂ and formate/bicarbonate. The challenges associated with the development of nanocatalysts based on earth‐abundant elements for dehydrogenation and hydrogenation reactions of these compounds for H₂ storage and release are emphasized in the discussions. Finally, the pressing research questions and major issues that need to be addressed in the near future to help the realization of the “hydrogen economy” are outlined.     

Photo/Electrochemical Applications of Metal Sulfide/TiO2 Heterostructures

Developing efficient and affordable catalysts is of great significance for energy and environmental sustainability. Heterostructure photocatalysts exhibit a better performance than either of the parent phases as it changes the band bending at the interfaces and provides a driving force for carrier separation, thus mitigating the effects of carrier recombination and back‐reaction. Herein, the photo/electrochemical applications of a variety of metal sulfides (MS_x) (MoS₂, CdS, CuS, PbS, SnS₂, ZnS, Ag₂S, Bi₂S₃, and In₂S₃)/TiO₂ heterojunctions are summarized, including organic degradation, water splitting, and CO₂ reduction conversion. First, a general introduction on each MS_x material (especially bandgap structures) will be given. Then the photo/electrochemical applications based on MS_x/TiO₂ heterostructures are reviewed from the perspective of light harvesting ability, charge carrier separation and transportation, and surface chemical reactions. Special focus is given to CdS/TiO₂ and PbS/TiO₂‐based quantum dot sensitized solar cells. Ternary composites by taking advantages of positive synergetic effects are also well summarized. Finally, conclusions are made regarding approaches for structure design, and the authors' perspective on future architectural design and electrode construction is given. This work will make up the gap for TiO₂ nanocomposites and shed light on the fabrication of more efficient MS_x‐metal oxide junctions in photo/electrochemical applications.     

Carbon assimilation pathways in sulfate reducing bacteria. Formate,carbon dioxide,carbon monoxide,and acetate assimilation by Desulfovibrio baarsii

Desulfovibrio baarsii is a sulfate reducing bacterium, which can grown on formate plus sulfate as sole energy source and formate and CO₂ as sole carbon sources. It is shown by ¹⁴C labelling studies that more than 60% of the cell carbon is derived from CO₂ and the rest from formate. The cells thus grow autotrophically. Labelling studies with [¹⁴C]acetate, ¹⁴CO and [¹⁴C]formate indicate that CO₂ fixation does not proceed via the Calvin cycle. The labelling patterns of alanine, aspartate, glutamate, and glucosamine indicate that acetate (or activated acetic acid) is an early intermediate in formate and CO₂ assimilation; the methyl group of acetate is derived from formate, and the carboxyl group from CO₂ via CO; pyruvate is formed from acetyl-CoA by reductive carboxylation. The capacity to synthesize an acetate unit from two C₁-compounds obviously distinguishes D. baarsii from those Desulfovibrio species, which require acetate as a carbon source in addition to CO₂.     

Exploiting Synergistic Effect by Integrating Ruthenium–Copper Nanoparticles Highly Co‐Dispersed on Graphene as Efficient Air Cathodes for Li–CO2 Batteries

Li–CO₂ batteries are attractive electrical energy storage devices; however, they still suffer from unsatisfactory electrochemical performance, and the kinetics of CO₂ reduction and evolution reactions must be improved significantly. Herein, a composite of ruthenium–copper nanoparticles highly co‐dispersed on graphene (Ru–Cu–G) as efficient air cathodes for Li–CO₂ batteries is designed. The Li–CO₂ batteries with Ru–Cu–G cathodes exhibit ultra‐low overpotential and can be operated for 100 cycles with a fixed capacity of 1000 mAh g^?1 at 200 and 400 mA g^?1. The synergistic effect between Ru and Cu not only regulates the growth of discharge products, but also promotes CO₂ reduction and evolution reactions by changing the electron cloud density of the surface between Ru and Cu. This work may provide new directions and strategies for developing highly efficient air cathodes for Li–CO₂ batteries, or even practical Li–air batteries.