Molecular diversity of lactic acid bacteria from cassava sour starch (Colombia)

Lactic acid bacteria and more particularly lactobacilli and Leuconostoc, are widely found in a wide variety of traditional fermented foods of tropical countries, made with cereals, tubers, meat or fish. These products represent a source of bacterial diversity that cannot be accurately analysed using classical phenotypic and biochemical tests. In the present work, the identification and the molecular diversity of lactic acid bacteria isolated from cassava sour starch fermentation were assessed by using a combination of complementary molecular methods: Randomly Amplified Polymorphic DNA fingerprinting (RAPD), plasmid profiling, hybridization using rRNA phylogenetic probes and partial 16S rDNA sequencing. The results revealed a large diversity of bacterial species (Lb. manihotivorans, Lb. plantarum, Lb. casei, Lb. hilgardii, Lb. buchneri, Lb. fermentum, Ln. mesenteroides and Pediococcus sp.). However, the most frequently isolated species were Lb. plantarum and Lb. manihotivorans. The RAPD analysis revealed a large molecular diversity between Lb. manihotivorans or Lb. plantarum strains. These results, observed on a rather limited number of samples, reveal that significant bacterial diversity is generated in traditional cassava sour starch fermentations. We propose that the presence of the amylolytic Lb. manihotivorans strains could have a role in sour starch processing.     

Microbial ecology of fermenting plant materials

Abstract The lactic acid fermentation of plant materials is presented from an ecological perspective emphasizing microbial interactions and their influence on the production of fermented plant foods and silage. The plant lactic acid bacteria are discussed in terms of evolution; epiphytic function; physical distribution within fermented material; substrates and products; microbial sequences in fermentation; interactions among species; pure culture fermentation; and starter culture development.     

Bacterial community associated with ensilage process of wilted guinea grass

Aims: To determine the effects of wilting, storage period and bacterial inoculant on the bacterial community and ensiling fermentation of guinea grass silage. Methods and Results: Fermentation products, colony counts and denaturing gradient gel electrophoresis (DGGE) profiles were determined. There was more lactic acid than acetic acid in all silages, but the lactic acid to acetic acid ratio decreased with storage time. This shift from lactic to acetic acid was not prevented even with a combination of wilting and bacterial inoculant. The DGGE analyses suggest that facultatively heterofermentative lactic acid bacteria (Lactobacillus plantarum, Lactobacillus brevis and Lactobacillus pentosus) were involved in the shift to acetic acid fermentation. Conclusions: Lactic acid can dominate the fermentation in tropical grass silage with sufficient wilting prior to ensiling. Prolonged storage may lead to high levels of acetic acid without distinctive changes in the bacterial community. Significance and Impact of the Study: The bacterial community looks stable compared to fermentation products over the course of long storage periods in tropical grass silage. Acetic acid fermentation in tropical grass silage can be a result of the changes in bacterial metabolism rather than community structure.     

Utilization of by-products derived from bioethanol production process for cost-effective production of lactic acid

The by-products of bioethanol production such as thin stillage (TS) and condensed distillers solubles (CDS) were used as a potential nitrogen source for economical production of lactic acid. The effect of those by-products and their concentrations on lactic acid fermentation were investigated using Lactobacillus paracasei CHB2121. Approximately, 6.7 g/L of yeast extract at a carbon source to nitrogen source ratio of 15 was required to produce 90 g/L of lactic acid in the medium containing 100 g/L of glucose. Batch fermentation of TS medium resulted in 90 g/L of lactic acid after 48 h, and the medium containing 10 % CDS resulted in 95 g/L of lactic acid after 44 h. Therefore, TS and CDS could be considered as potential alternative fermentation medium for the economical production of lactic acid. Furthermore, lactic acid fermentation was performed using only cassava and CDS for commercial production of lactic acid. The volumetric productivity of lactic acid [2.94 g/(L·h)] was 37 % higher than the productivity obtained from the medium with glucose and CDS.     

Technological and economic potential of poly(lactic acid) and lactic acid derivatives

Abstract: Lactic acid has been an intermediate-volume specialty chemical (world production ∼ 40,000 tons/yr) used in a wide range of food processing and industrial applications. Lactic acid has the potential of becoming a very large volume, commodity-chemical intermediate produced from renewable carbohydrates for use as feedstocks for biodegradable polymers, oxygenated chemicals, plant growth regulators, environmentally friendly 'green' solvents, and specialty chemical intermediates. The recent announcements of new development-scale plants for producing lactic acid and polymer intermediates by major U.S. companies, such as Cargill, Ecochem (DuPont/ConAgra), and Archer Daniels Midland, attest to this potential.
In the past, efficient and economical technologies for the recovery and purification of lactic acid from crude fermentation broths and the conversion of lactic acid to the chemical or polymer intermediates had been the key technology impediments and main process cost centers. The development and deployment of novel separations technologies, such as electrodialysis (ED) with bipolar membranes, extractive distillations integrated with fermentation, and chemical conversion, can enable low-cost production with continuous processes in large-scale operations. The use of bipolar ED can virtually eliminate the salt or gypsum waste produced in the current lactic acid processes. Thus, the emerging technologies can use environmentally sound processes to produce environmentally useful products from lactic acid. The process economics of some of these processes and products can also be quite attractive. In this paper, the recent technical advances in lactic and polyactic acid processes are discussed. The economic potential and manufacturing cost estimates of several products and process options are presented. The technical accomplishments at Argonne National Laboratory (ANL) and the future directions of this program at ANL are discussed.     

Characterization of ethanol fermentation waste and its application to lactic acid production by Lactobacillus paracasei

In this study, an ethanol fermentation waste (EFW) was characterized for use as an alternative to yeast extract for bulk fermentation processes. EFW generated from a commercial plant in which ethanol is produced from cassava/rice/wheat/barley starch mixtures using Saccharomyces cerevisiae was used for lactic acid production by Lactobacillus paracasei. The effects of temperature, pH, and duration on the autolysis of an ethanol fermentation broth (EFB) were also investigated. The distilled EFW (DEFW) contained significant amounts of soluble proteins (2.91 g/l), nitrogen (0.47 g/l), and amino acids (24.1 mg/l). The autolysis of the EFB under optimum conditions released twice as much amino acids than in the DEFW. Batch fermentation in the DEFW increased the final lactic acid concentration, overall lactic acid productivity, and lactic acid yield on glucose by 17, 41, and 14 %, respectively, in comparison with those from comparable fermentation in a lactobacillus growth medium (LGM) that contained 2 g/l yeast extract. Furthermore, the overall lactic acid productivity in the autolyzed then distilled EFW (ADEFW) was 80 and 27 % higher than in the LGM and DEFW, respectively.     

Polyurethane foam as an inert carrier for the production of L(+)-lactic acid by Lactobacillus casei under solid-state fermentation

AIM: Production of L-lactic acid in solid-state fermentation (SSF) using polyurethane foam (PUF) as inert support moistened with cassava bagasse starch hydrolysate. METHODS AND RESULTS: PUF impregnated with cassava bagasse starch hydrolysate as major carbon source was used for the production of L-lactic acid using Lactobacillus casei in solid-state condition. The key parameters such as reducing sugar, inoculum size and nutrient mixture were optimized by statistical approach using response surface methodology. More than 95% conversion of sugars to lactic acid from 4 g reducing sugar per gram dry support was attained after 72 h when the inert substrate was moistened with 6.5 ml of nutrient solution and inoculated with 1.5 x 10(9) CFU of L. casei. While considering the lactate yield based on the solid support used, a very high yield of 3.88 g lactic acid per gram PUF was achieved. CONCLUSION: PUF acted as an excellent inert support for L. casei and provided a platform for the utilization of starchy waste hydrolysate in a lower reactor volume. SIGNIFICANCE AND IMPACT OF THE STUDY: This is a cost effective cultivation of lactic acid bacteria for producing lactic acid from agro based waste products such as cassava bagasse. This is the first report on the exploitation of PUF as an inert support for lactate production under SSF.     

Original properties of ropy strains of Lactobacillus plantarum isolated from the sour cassava starch fermentation

C. FIGUEROA, A.M. DAVILA AND J. POURQUIÉ 1997. Sour cassava starch is the result of a lactic fermentation of raw cassava starch followed by sun drying. Lactobacillus plantarum strains are commonly isolated from this fermentation. Among them, a particular group of strains has been characterized by a strong ropy phenotype, the production of a thickening factor under submerged cultures conditions, a low nutritional requirement for organic nitrogen and an absence of amylolytic activity. However, these strains have been shown to thrive on starch, through commensalistic interactions with amylolytic lactic acid bacteria. These results explain the frequent occurrence of ropy, non-amylolytic strains in sour starch fermentation, and support the hypothesis of exopolysaccharides production during this fermentation.     

Design and Evaluation of a Lactobacillus manihotivorans Species-Specific rRNA-Targeted Hybridization Probe and Its Application to the Study of Sour Cassava Fermentation

Based on 16S rRNA sequence comparison, we have designed a 20-mer oligonucleotide that targets a region specific to the species Lactobacillus manihotivorans recently isolated from sour cassava fermentation. The probe recognized the rRNA obtained from all the L. manihotivorans strains tested but did not recognize 56 strains of microorganisms from culture collections or directly isolated from sour cassava, including 29 species of lactic acid bacteria. This probe was then successfully used in quantitative RNA blots and demonstrated the importance of L. manihotivorans in the fermentation of sour cassava starch, which could represent up to 20% of total lactic acid bacteria.     

Design and evaluation of a Lactobacillus manihotivorans species-specific rRNA-targeted hybridization probe and its application to the study of sour cassava fermentation

Based on 16S rRNA sequence comparison, we have designed a 20-mer oligonucleotide that targets a region specific to the species Lactobacillus manihotivorans recently isolated from sour cassava fermentation. The probe recognized the rRNA obtained from all the L. manihotivorans strains tested but did not recognize 56 strains of microorganisms from culture collections or directly isolated from sour cassava, including 29 species of lactic acid bacteria. This probe was then successfully used in quantitative RNA blots and demonstrated the importance of L. manihotivorans in the fermentation of sour cassava starch, which could represent up to 20% of total lactic acid bacteria.     

Microbial production of d‐lactic acid from dried distiller's grains with solubles

d ‐Lactic acid production is gaining increasing attention due to the thermostable properties of its polymer, poly‐d ‐lactic acid . In this study, Lactobacillus coryniformis subsp. torquens, was evaluated for its ability to produce d ‐lactic acid using Dried Distiller's Grains with Solubles (DDGS) hydrolysate as the substrate. DDGS was first subjected to alkaline pretreatment with sodium hydroxide to remove the hemicellulose component and the generated carbohydrate‐rich solids were then subjected to enzymatic hydrolysis using cellulase mixture Accellerase® 1500. When comparing separate hydrolysis and fermentation and simultaneous saccharification and fermentation (SSF) of L. coryniformis on DDGS hydrolysate, the latter method demonstrated higher d ‐lactic acid production (27.9 g/L, 99.9% optical purity of d ‐lactic acid), with a higher glucose to d ‐lactic acid conversion yield (84.5%) compared to the former one (24.1 g/L, 99.9% optical purity of d ‐lactic acid). In addition, the effect of increasing the DDGS concentration in the fermentation system was investigated via a fed‐batch SSF approach, where it was shown that the d ‐lactic acid production increased to 38.1 g/L and the conversion yield decreased to 70%. In conclusion, the SSF approach proved to be an efficient strategy for the production of d ‐lactic acid from DDGS as it reduced the overall processing time and yielded high d ‐lactic acid concentrations.     

Characterization and distribution of lactic acid bacteria in cassava fermentation during fufu production

One hundred and thirty four lactic acid bacterial strains isolated during the 96-h period of cassava fermentation for fufu production were identified. The spectrum and proportion of the strains include Lactobacillus plantarum , 81%; Leuconostoc mesenteroides , 16%; Lact. cellobiosus , 15%; Lact. brevis , 9%; Lact, coprophilus , 5%; Lact. lactis , 4%; Leuc. lactis , 3% and Lact. bulgaricus , 1%. The isolates were characterized into strains. The succession among the lactic isolates was established. Lactobacillus plantarum was identified as the most dominant lactic acid bacterial strain involved in the fermentation.     

Extractive fermentation of lactic acid by immobilizedLactobacillus casei using ion—exchange resin

Summary A novel method of lactic acid fermentation byLactobacillus casei immobilized in Ca—alginate gels is described, in which an ion—exchange resin packed column is attached to a fermentor for separation of lactic acid from fermentative broth. The technique successfully alleviated the restriction imposed by lactic acid on bacterial growth and product formation. As compared to the conventional batch fermentation, the new fermentation technique enhanced the lactic acid productivity and sugar conversion rate from 0.328g/L·h and 88. 2% to 0.482g/L·h and 98.6%, respectively.     

Heteropolysaccharides from lactic acid bacteria

Microbial exopolysaccharides are biothickeners that can be added to a wide variety of food products, where they serve as viscosifying, stabilizing, emulsifying or gelling agents. Numerous exopolysaccharides with different composition, size and structure are synthesized by lactic acid bacteria. The heteropolysaccharides from both mesophilic and thermophilic lactic acid bacteria have received renewed interest recently. Structural analysis combined with rheological studies revealed that there is considerable variation among the different exopolysaccharides; some of them exhibit remarkable thickening and shear-thinning properties and display high intrinsic viscosities. Hence, several slime-producing lactic acid bacterium strains and their biopolymers have interesting functional and technological properties, which may be exploited towards different products, in particular, natural fermented milks. However, information on the biosynthesis, molecular organization and fermentation conditions is rather scarce, and the kinetics of exopolysaccharide formation are poorly described. Moreover, the production of exopolysaccharides is low and often unstable, and their downstream processing is difficult. This review particularly deals with microbiological, biochemical and technological aspects of heteropolysaccharides from, and their production by, lactic acid bacteria. The chemical composition and structure, the biosynthesis, genetics and molecular organization, the nutritional and physiological aspects, the process technology, and both food additive and in situ applications (in particular in yogurt) of heterotype exopolysaccharides from lactic acid bacteria are described. Where appropriate, suggestions are made for strain improvement, enhanced productivities and advanced modification and production processes (involving enzyme and/or fermentation technology) that may contribute to the economic soundness of applications with this promising group of biomolecules.     

Direct fermentative production of lactic acid on cassava and other starch substrates

Lactobacillus amylovorus utilized raw corn, rice and wheat starch medium to produce lactic acid with a productivity of 10.1, 7.9 and 7.8 g lactic acid/L, but had lower productivities of 4.8 g/L and 4.2 g/L on cassava and potato starch in basal medium respectively. When peptone (1%) is added to basal medium with cassava starch as substrate, conversion rate increased from 43% conversion to 70% conversion (7.7 g lactic acid/L). The availability of some components of protein in corn starch is assumed to be the reason for high lactic acid production as compared to that of cassava starch.     

Applications for biotechnology: present and future improvements in lactic acid bacteria

The lactic acid bacteria are involved in the manufacture of fermented foods from raw agricultural materials such as milk, meat, vegetables, and cereals. These fermented foods are a significant part of the food processing industry and are often prepared using selected strains that have the ability to produce desired products or changes efficiently. The application of genetic engineering technology to improve existing strains or develop novel strains for these fermentations is an active research area world-wide. As knowledge about the genetics and physiology of lactic acid bacteria accumulates, it becomes possible to genetically construct strains with characteristics shaped for specific purposes. Examples of present and future applications of biotechnology to lactic acid bacteria to improve product quality are described. Studies of the basic biology of these bacteria are being actively conducted and must be continued, in order for the food fermentation industry to reap the benefits of biotechnology.     

Systems Metabolic Engineering Strategies for Non‐Natural Microbial Polyester Production

Plastics, used everyday, are mostly synthetic polymers derived from fossil resources, and their accumulation is becoming a serious concern worldwide. Polyhydroxyalkanoates (PHAs) are naturally produced polyesters synthesized and intracellularly accumulated by many different microorganisms. PHAs are good alternatives to petroleum‐based plastics because they possess a wide range of material properties depending on monomer types and molecular weights. In addition, PHAs are biodegradable and can be produced from renewable biomass. Thus, producing PHAs through the development of high‐performance engineered microorganisms and efficient bioprocesses gained much interest. In addition, non‐natural polyesters comprising 2‐hydroxycarboxylic acids as monomers have been produced by fermentation of metabolically engineered bacteria. For example, poly(lactic acid) and poly(lactic acid‐co‐glycolic acid), which have been chemically synthesized using the corresponding monomers either fermentatively or chemically produced, can be produced by metabolically engineered bacteria by one‐step fermentation. Recently, PHAs containing aromatic monomers could be produced by fermentation of metabolically engineered bacteria. Here, metabolic engineering strategies applied in developing microbial strains capable of producing non‐natural polyesters in a stepwise manner are reviewed. It is hoped that the detailed strategies described will be helpful for designing metabolic engineering strategies for developing diverse microbial strains capable of producing various polymers that can replace petroleum‐derived polymers.     

Kinetics of direct fermentation of agricultural commodities to L(+) lactic acid byRhizopus oryzae

Summary The kinetics of fermenting barley, cassava, corn, oats, and rice directly to L(+) lactic acid byRhizopus oryzae NRRL 395 were determined. The rates of carbohydrate consumption and L(+) lactic acid production were found to be influenced by the type of substrate, the substrate concentration, the fermentation temperature, and the presence of a neutralizing agent.     

Applications for biotechnology: present and future improvements in lactic acid bacteria

Abstract The lactic acid bacteria are involved in the manufacture of fermented foods from raw agricultural materials such as milk, meat, vegetables, and cereals. These fermented foods are a significant part of the food processing industry and are often prepared using selected strains that have the ability to produce desired products or changes efficiently. The application of genetic engineering technology to improve existing strains or develop novel strains for these fermentations is an active research area world-wide. As knowledge about the genetics and physiology of lactic acid bacteria accumulates, it becomes possible to genetically construct strains with characteristics shaped for specific purposes. Examples of present and future applications of biotechnology to lactic acid bacteria to improve product quality are described. Studies of the basic biology of these bacteria are being actively conducted and must be continued, in order for the food fermentation industry to reap the benefits of biotechnology.     

一株厌氧嗜热杆菌生长及发酵特性的初步研究

论文对筛选并鉴定为Thermoanaerobacterium saccharolyticum菌株的生长、底物利用情况、产物生成以及酒精耐受性进行了研究。结果表明,该菌在以甘露糖、葡萄糖和木糖为碳源时生长较好,同时能够较好的利用木聚糖和木薯淀粉;最适底物浓度为15g/L;不同的葡萄糖:木糖比例对其生长无显著影响;能耐受的培养基最高初始酒精浓度为3%(V/V)。在5g/L的木聚糖、木糖和木薯淀粉培养基中发酵60h后,产物主要有乙醇、乳酸和乙酸,乙醇产量分别为0.824、0.867和0.916g/L。