Role of proline residues in conferring thermostability on aqualysin I

To understand the molecular basis of the thermostability of a thermophilic serine protease aqualysin I from Thermus aquaticus YT-1, we introduced mutations at Pro5, Pro7, Pro240 and Pro268, which are located on the surface loops of aqualysin I, by changing these amino acid residues into those found at the corresponding locations in VPR, a psychrophilic serine protease from Vibrio sp. PA-44. All mutants were expressed stably and exhibited essentially the same specific activity as wild-type aqualysin I at 40 degrees C. The P240N mutant protein had similar thermostability to wild-type aqualysin I, but P5N and P268T showed lower thermostability, with a half-life at 90 degrees C of 15 and 30 min, respectively, as compared to 45 min for the wild-type enzyme. The thermostability of P7I was decreased even more markedly, and the mutant protein was rapidly inactivated at 80 degrees C and even at 70 degrees C, with half-lives of 10 and 60 min, respectively. Differential scanning calorimetry analysis showed that the transition temperatures of wild-type enzyme, P5N, P7I, P240N and P268T were 93.99 degrees C, 83.45 degrees C, 75.66 degrees C, 91.78 degrees C and 86.49 degrees C, respectively. These results underscore the importance of the proline residues in the N- and C-terminal regions of aqualysin I in maintaining the integrity of the overall protein structure at elevated temperatures.     

A multi-factors rational design strategy for enhancing the thermostability of Escherichia coli AppA phytase

Despite recent advances in our understanding of the importance of protein surface properties for protein thermostability,there are seldom studies on multi-factors rational design strategy, so a more scientific, simple and effective rational strategy is urgent for protein engineering. Here, we first attempted to use a three-factors rational design strategy combining three common structural features, protein flexibility, protein surface, and salt bridges. Escherichia coli AppA phytase was used as a model enzyme to improve its thermostability. Moreover, the structure and enzyme features of the thermostable mutants designed by our strategy were analyzed roundly. For the single mutants, two (Q206E and Y311K), in five exhibited thermostable property with a higher success rate of prediction (40 %). For the multiple mutants, the themostable sites were combined with another site, I427L, we obtained by directed evolution, Q206E/I427L, Y311K/I427L, and Q206E/Y311K/I427L, all exhibited thermostable property. The Y311K/I427L doubled thermostability (61.7 %, and was compared to 30.97 % after being heated at 80 °C for 10 min) and catalytic efficiency (4.46 was compared to 2.37) improved more than the wild-type AppA phytase almost without hampering catalytic activity. These multi-factors of rational design strategy can be applied practically as a thermostabilization strategy instead of the conventional single-factor approach.     

理性设计提高酯合成催化反应脂肪酶的热稳定性

【背景】南极假丝酵母脂肪酶B (Candida antarctica lipase B,CALB)具有优异的酯合成活性,是在非水相催化中应用极为广泛的工业用酶。【目的】在保留CALB优秀催化性能的基础上,提高CALB的热稳定性。【方法】采用预测软件PoPMuSiC和FoldX计算CALB潜在热稳定性突变位点,并根据氨基酸残基的空间位置进一步筛选。利用重叠延伸PCR技术在基因calb中引入10个单点突变,于毕赤酵母GS115中表达。【结果】点突变A146G、A151P、L278M均能有效提高CALB的热稳定性。在单点突变的基础上,组合突变体A146G-L278M和A146G-L278M-A151P的热稳定性得到进一步提高。与野生型相比,突变体A146G-L278M和A146G-L278M-A151P的最适反应温度均提高了5°C,T_m值分别提高了3.3°C和4.2°C。此外,合成己酸乙酯的酶促反应动力学分析表明,相比于野生型,突变体A146G-L278M和A146G-L278M-A151P对己酸和乙醇均具有更高的亲和力,且对己酸的催化效率k_(catA)/K_(m A)是野生型的4.1倍。通过分子动力学模拟,从分子水平阐明了突变体A146G-L278M和A146G-L278M-A151P热稳定性提高的机制。【结论】本研究采用的理性设计策略对提高CALB的热稳定性是行之有效的,该策略可作为其他工业用酶提高热稳定性的参考。     

Cumulative effect of amino acid replacements results in enhanced thermostability of potato type L alpha-glucan phosphorylase

The thermostability of potato type L alpha-glucan phosphorylase (EC 2.4.1.1) was enhanced by random and site-directed mutagenesis. We obtained three single-residue mutations-Phe39-->Leu (F39L), Asn135-->Ser (N135S), and Thr706-->Ile (T706I)-by random mutagenesis. Although the wild-type enzyme was completely inactivated, these mutant enzymes retained their activity even after heat treatment at 60 degrees C for 2 h. Combinations of these mutations were introduced by site-directed mutagenesis. The simultaneous mutation of two (F39L/N135S, F39L/T706I, and N135S/T706I) or three (F39L/N135S/T706I) residues further increased the thermostability of the enzyme, indicating that the effect of the replacement of the residues was cumulative. The triple-mutant enzyme, F39L/N135S/T706I, retained 50% of its original activity after heat treatment at 65 degrees C for 20 min. Further analysis indicated that enzymes with a F39L or T706I mutation were resistant to possible proteolytic degradation.     

Development of an Escherichia coli expression system and thermostability screening assay for libraries of mutant xylanase

A thermostability screening assay was developed using an Escherichia coli expression system to express Streptomyces lividans xylanase A (XlnA). The screening system was tested using mutants randomized at position 49 of the S. lividans XlnA gene, a position previously shown to confer thermostability with a I49P point mutation. The library was cloned into an E. coli expression vector and transformed into XL1-blue bacteria. The resulting clones were screened for increased thermostability with respect to wild-type XlnA. Using this assay, we isolated the I49P mutant previously shown to be thermostable, as well as novel I49A and I49C mutants. The I49A and I49C mutants were shown to have 2.8- to 8-fold increase in thermostability over that of wild-type XlnA. The results show that the screening assay can selectively enrich for clones with increased thermostability and is suitable for screening small- to medium-sized libraries of 5000–20,000 clones. Journal of Industrial Microbiology & Biotechnology (2000) 25, 310–314. Received 18 May 2000/ Accepted in revised form 19 September 2000     

Mutational effects on thermostable superoxide dismutase from Aquifex pyrophilus: understanding the molecular basis of protein thermostability

We designed two mutants of superoxide dismutase (SOD), one is thermostable and the other is thermolabile, which provide valuable insight to identify amino acid residues essential for the thermostability of the SOD from Aquifex pyrophilus (ApSOD). The mutant K12A, in which Lys12 was replaced by Ala, had increased thermostability compared to that of the wild type. The T(1/2) value of K12A was 210 min and that of the wild type was 175 min at 95 degrees C. However, the thermostability of the mutant E41A, which has a T(1/2) value of 25 min at 95 degrees C, was significantly decreased compared to the wild type of ApSOD. To explain the enhanced thermostability of K12A and thermolabile E41A on the structural basis, the crystal structures of the two SOD mutants have been determined. The results have clearly shown the general significance of hydrogen bonds and ion-pair network in the thermostability of proteins.     

Structural basis for the thermostability of ferredoxin from the cyanobacterium Mastigocladus laminosus

Plant-type ferredoxins (Fds) carry a single [2Fe-2S] cluster and serve as electron acceptors of photosystem I (PSI). The ferredoxin from the thermophilic cyanobacterium Mastigocladus laminosus displays optimal activity at 65 degrees C. In order to reveal the molecular factors that confer thermostability, the crystal structure of M.laminosus Fd (mFd) was determined to 1.25 A resolution and subsequently analyzed in comparison with four similar plant-type mesophilic ferredoxins. The topologies of the plant-type ferredoxins are similar, yet two structural determinants were identified that may account for differences in thermostability, a salt bridge network in the C-terminal region, and the flexible L1,2 loop that increases hydrophobic accessible surface area. These conclusions were verified by three mutations, i.e. substitution of L1,2 into a rigid beta-turn ((Delta)L1,2) and two point mutations (E90S and E96S) that disrupt the salt bridge network at the C-terminal region. All three mutants have shown reduced electron transfer (ET) capabilities and [2Fe-2S] stability at high temperatures in comparison to the wild-type mFd. The results have also provided new insights into the involvement of the L1,2 loop in the Fd interactions with its electron donor, the PSI complex.     

Improved thermostability and the optimum temperature of Rhizopus arrhizus lipase by directed evolution

To expand the functionality of lipase from Rhizopus arrhizus (RAL) we have used error-prone PCR and DNA shuffling methods to create RAL mutants with improved thermostability and the optimum temperature. One desirable mutant with three amino acids substitution was obtained. The mutated lipase was purified and characterized. The optimum temperature of the mutant lipase was higher by 10 °C than that of the wild-type RAL (WT-RAL). In addition, the thermostability characteristic of the mutant was also improved as the result of directed evolution. The half-life (T_1/2) at 50 °C of the mutant exceeded those of WT-RAL by 12-fold. To confirm which substitution contributed to enhance thermostability and the optimum temperature for lipase activity, three chimeric lipases: chimeric lipase 1(CL-1; A9T), chimeric lipase 2 (CL-2; E190V) and chimeric lipase 3 (CL-3; M225I) from the WT-RAL gene were constructed. Each of the chimeric enzymes was purified and characterized. Amino acid substitution at position 190 was determined to be critical for lipase thermostability and the optimum temperature, while the residue at position 9 and 225 had only marginal effect. The mutational effect is interpreted according to a simulated three-dimensional structure for the mutant lipase.     

Conferring thermostability to mesophilic proteins through optimized electrostatic surfaces

Recently, there have been several experimental reports of proteins displaying appreciable stability gains through mutation of one or two amino acid residues. Here, we employ a simple theoretical model to quickly screen mutant structures for increased thermostability through optimization of the protein's electrostatic surface. Our results are able to reproduce the experimental observation that elimination of like-charge repulsions and creation of opposite-charge attractions on the protein surface is an efficient method to confer thermostability to a mesophilic protein. Using Poisson-Boltzmann electrostatics, we calculate relative protein stabilities for the exhaustive surface mutagenesis of the cold shock, RNase T1, and CheY proteins. Comparison with 25 experimentally characterized cold shock protein mutants reveals an average correlation of 0.86. The model is also quantitatively accurate when reproducing the experimental D49A and D49H mutant stabilities of RNase T1. This work represents the first comprehensive in silico screening of mutant candidates likely to confer thermostability to mesophilic proteins through optimization of surface electrostatics. Systematic single mutant, followed by double mutant, screening yields a limited number of mutant structures displaying significant stability gains suitable for subsequent experimental characterization.     

Cumulative improvements of thermostability and pH-activity profile of Aspergillus niger PhyA phytase by site-directed mutagenesis

Aspergillus niger phytase (PhyA) has been used as a feed supplement to reduce manure phosphorus excretion of swine and poultry but lacks sufficient thermostability for feed pelleting and appropriate pH-activity profile for phytate hydrolysis in the stomach of animals. Previously, a thermostable mutant PhyA18 and two pH-activity profile-improved mutants E228K and K300E were developed. In this study, the mutations were combined to determine if both improvements were cumulative. Four substitutions (S149P, F131L, K112R, and K195R) identified from random mutagenesis were added sequentially to the combined mutants to further improve their thermostability. Mutant E228K shifted the optimum pH of the parent one from 5.5 to 4.0 and increased (P < 0.05) its specific activity at pH 3.5, whereas mutant K300E eliminated the activity dip at pH 3.5 shown in the wild type. Mutant S149P further improved thermostability over PhyA18. Our results illustrate the feasibility and structural basis to improve thermostability and pH-activity profile of PhyA phytase by assembling mutations derived from rational design and random mutagenesis.     

Investigation on the effects of three X-->histidine replacements on thermostability of alpha-amylase from Bacillus amyloliquefaciens

Bacillus licheniformis alpha-amylase (BLA), a thermophilic counterpart of Bacillus amyloliquefaciens alpha-amylase (BAA), is an appropriate model for the design of stabilizing mutations in BAA. BLA has 10 more histidines than BAA. Considering this prominent difference, in the present study, three out of these positions (I34, Q67, and P407; located in the thermostability determinant 1 region and Ca-III binding site of BAA) were replaced with histidine in BAA, using the site-directed mutagenesis technique. The results showed that the thermostability of P407H and Q67H mutants had increased, but no significant changes were observed in their kinetic parameters compared to that of the wild type. I34H replacement resulted in complete loss of enzyme activity. Moreover, fluorescence and circular dichroism data indicated a more rigid structure for the P407H variant compared with that of the wild-type BAA. However, the flexibility of Q67H and I34H mutants increased in comparison with that of wild-type enzyme.     

Analysis of a conserved hydrophobic pocket important for the thermostability of Bacillus pumilus chloramphenicol acetyltransferase (CAT-86)

Site-directed mutagenesis was carried out on Bacillus pumilus chloramphenicol acetyltransferase (CAT-86) to determine the effects of substitution at a conserved hydrophobic pocket identified earlier as important for thermostability. Mutations were introduced that would substitute residues at consensus positions 33, 191 and 203 in the enzyme, both individually and in combination. Two mutants, SDM1 (CAT-86 Y33F, A203V) and SDM5 (CAT-86 A203I), were more thermostable than wild-type and two mutants, SDM4 (CAT-86 I191V) and SDM7 (CAT-86 A203G), were less stable. Reconstruction of the residues of this hydrophobic pocket to that of a more thermostable CAT-R387 enzyme pocket (as a Y33F, I191V, A203V triple mutant) increased the thermostability of the enzyme above the wild-type, but its stability was less than that of SDM1 and SDM5. The K(m) values of the mutant enzymes for chloramphenicol and acetyl-CoA were essentially unaltered (in the ranges 15-30 and 26-35 microM respectively) and the specific activity of purified enzyme was in the range 270-710 units/mg protein. The possible effects of the amino acid substitutions on the CAT-86 structure were determined by homology modelling. A reduction in conformational strain and optimized hydrophobic interactions are predicted to be responsible for the increased thermostability of the SDM1 and SDM5 mutants.     

Effects of a novel disulfide bond and engineered electrostatic interactions on the thermostability of azurin

Identification and evaluation of factors important for thermostability in proteins is a growing research field with many industrial applications. This study investigates the effects of introducing a novel disulfide bond and engineered electrostatic interactions with respect to the thermostability of holo azurin from Pseudomonas aeruginosa. Four mutants were selected on the basis of rational design and novel temperature-dependent atomic displacement factors from crystal data collected at elevated temperatures. The atomic displacement parameters describe the molecular movement at higher temperatures. The thermostability was evaluated by optical spectroscopy as well as by differential scanning calorimetry. Although azurin has a high inherent stability, the introduction of a novel disulfide bond connecting a flexible loop with small alpha-helix (D62C/K74C copper-containing mutant), increased the T(m) by 3.7 degrees C compared with the holo protein. Furthermore, three mutants were designed to introduce electrostatic interactions, K24R, D23E/K128R, and D23E/K128R/K24R. Mutant K24R stabilizes loops between two separate beta-strands and D23E/K128R was selected to stabilize the C-terminus of azurin. Furthermore, D23E/K128R/K24R was selected to reflect the combination of the electrostatic interactions in D23E/K128R and K24R. The mutants involving electrostatic interactions had a minor effect on the thermostability. The crystal structures of the copper-containing mutants D62C/K74C and K24R have been determined to 1.5 and 1.8 A resolution. In addition the crystal structure of the zinc-loaded mutant D62C/K74C has also been completed to 1.8 A resolution. These structures support the selected design and provide valuable information for evaluating effects of the modifications on the thermostability of holo azurin.     

Complete reversal of coenzyme specificity of xylitol dehydrogenase and increase of thermostability by the introduction of structural zinc

Pichia stipitis NAD(+)-dependent xylitol dehydrogenase (XDH), a medium-chain dehydrogenase/reductase, is one of the key enzymes in ethanol fermentation from xylose. For the construction of an efficient biomass-ethanol conversion system, we focused on the two areas of XDH, 1) change of coenzyme specificity from NAD(+) to NADP(+) and 2) thermostabilization by introducing an additional zinc atom. Site-directed mutagenesis was used to examine the roles of Asp(207), Ile(208), Phe(209), and Asn(211) in the discrimination between NAD(+) and NADP(+). Single mutants (D207A, I208R, F209S, and N211R) improved 5 approximately 48-fold in catalytic efficiency (k(cat)/K(m)) with NADP(+) compared with the wild type but retained substantial activity with NAD(+). The double mutants (D207A/I208R and D207A/F209S) improved by 3 orders of magnitude in k(cat)/K(m) with NADP(+), but they still preferred NAD(+) to NADP(+). The triple mutant (D207A/I208R/F209S) and quadruple mutant (D207A/I208R/F209S/N211R) showed more than 4500-fold higher values in k(cat)/K(m) with NADP(+) than the wild-type enzyme, reaching values comparable with k(cat)/K(m) with NAD(+) of the wild-type enzyme. Because most NADP(+)-dependent XDH mutants constructed in this study decreased the thermostability compared with the wild-type enzyme, we attempted to improve the thermostability of XDH mutants by the introduction of an additional zinc atom. The introduction of three cysteine residues in wild-type XDH gave an additional zinc-binding site and improved the thermostability. The introduction of this mutation in D207A/I208R/F209S and D207A/I208R/F209S/N211R mutants increased the thermostability and further increased the catalytic activity with NADP(+).     

Adopting selected hydrogen bonding and ionic interactions from Aspergillus fumigatus phytase structure improves the thermostability of Aspergillus niger PhyA phytase

Although it has been widely used as a feed supplement to reduce manure phosphorus pollution of swine and poultry, Aspergillus niger PhyA phytase is unable to withstand heat inactivation during feed pelleting. Crystal structure comparisons with its close homolog, the thermostable Aspergillus fumigatus phytase (Afp), suggest associations of thermostability with several key residues (E35, S42, R168, and R248) that form a hydrogen bond network in the E35-to-S42 region and ionic interactions between R168 and D161 and between R248 and D244. In this study, loss-of-function mutations (E35A, R168A, and R248A) were introduced singularly or in combination into seven mutants of Afp. All seven mutants displayed decreases in thermostability, with the highest loss (25% [P<0.05]) in the triple mutant (E35A R168A R248A). Subsequently, a set of corresponding substitutions were introduced into nine mutants of PhyA to strengthen the hydrogen bonding and ionic interactions. While four mutants showed improved thermostability, the best response came from the quadruple mutant (A58E P65S Q191R T271R), which retained 20% greater (P<0.05) activity after being heated at 80 degrees C for 10 min and had a 7 degrees C higher melting temperature than that of wild-type PhyA. This study demonstrates the functional importance of the hydrogen bond network and ionic interaction in supporting the high thermostability of Afp and the feasibility of adopting these structural units to improve the thermostability of a homologous PhyA phytase.     

Improving the thermostability of methyl parathion hydrolase from Ochrobactrum sp. M231 using a computationally aided method

Good protein thermostability is very important for the protein application. In this report, we propose a strategy which contained a prediction method to select residues related to protein thermal stability, but not related to protein function, and an experiment method to screen the mutants with enhanced thermostability. The prediction strategy was based on the calculated site evolutionary entropy and unfolding free energy difference between the mutant and wild-type (WT) methyl parathion hydrolase enzyme from Ochrobactrum sp. M231 [Ochr-methyl parathion hydrolase (MPH)]. As a result, seven amino acid sites within Ochr-MPH were selected and used to construct seven saturation mutagenesis libraries. The results of screening these libraries indicated that six sites could result in mutated enzymes exhibiting better thermal stability than the WT enzyme. A stepwise evolutionary approach was designed to combine these selected mutants and a mutant with four point mutations (S274Q/T183E/K197L/S192M) was selected. The T _m and T ₅₀ of the mutant enzyme were 11.7 and 10.2 °C higher, respectively, than that of the WT enzyme. The success of this design methodology for Ochr-MPH suggests that it was an efficient strategy for enhancing protein thermostability and suitable for protein engineering.     

Improvement of oxidative and thermostability of N-carbamyl-d-amino Acid amidohydrolase by directed evolution

N-Carbamyl-D-amino acid amidohydrolase (N-carbamoylase), which is currently employed in the industrial production of unnatural D-amino acid in conjunction with D-hydantoinase, has low oxidative and thermostability. We attempted the simultaneous improvement of the oxidative and thermostability of N-carbamoylase from Agrobacterium tumefaciens NRRL B11291 by directed evolution using DNA shuffling. In a second generation of evolution, the best mutant 2S3 with improved oxidative and thermostability was selected, purified and characterized. The temperature at which 50% of the initial activity remains after incubation for 30 min was 73 degrees C for 2S3, whereas it was 61 degrees C for wild-type enzyme. Treatment of wild-type enzyme with 0.2 mM hydrogen peroxide for 30 min at 25 degrees C resulted in a complete loss of activity, but 2S3 retained about 79% of the initial activity under the same conditions. The K(m) value of 2S3 was estimated to be similar to that of wild-type enzyme; however k(cat) was decreased, leading to a slightly reduced value of k(cat)/K(m), compared with wild-type enzyme. DNA sequence analysis revealed that six amino acid residues were changed in 2S3 and substitutions included Q23L, V40A, H58Y, G75S, M184L and T262A. The stabilizing effects of each amino acid residue were investigated by incorporating mutations individually into wild-type enzyme. Q23L, H58Y, M184L and T262A were found to enhance both oxidative and thermostability of the enzyme and of them, T262A showed the most significant effect. V40A and G75S gave rise to an increase only in oxidative stability. The positions of the mutated amino acid residues were identified in the structure of N-carbamoylase from Agrobacterium sp. KNK 712 and structural analysis of the stabilizing effects of each amino acid substitution was also carried out.     

The thermostability of DNA-binding protein HU from mesophilic, thermophilic, and extreme thermophilic bacteria

Based on primary structure comparison between four highly homologous DNA-binding proteins (HUs) displaying differential thermostability, we have employed in vitro site-directed mutagenesis to decipher their thermostability mechanism at the molecular level. The contribution of the 11 amino acids that differ between the thermophilic HUBst from Bacillus stearothermophilus (Tm = 61.6 degrees C) and the mesophilic HUBsu from Bacillus subtilis (Tm = 39.7 degrees C) was evaluated by replacing these amino acids in HUBst with their mesophilic counterparts. Among 11 amino acids, three residues, Gly-15, Glu-34, and Val-42, which are highly conserved in the thermophilic HUs, have been found to be responsible for the thermostability of HUBst. These amino acids in combination (HUBst-G15E/E34D/V42I) reduce the thermostability of the protein (Tm = 45.1 degrees C) at the level of its mesophilic homologue HUBsu. By replacing these amino acids in HUBsu with their thermophilic counterparts, the HUBsu-E15G/D34E/142V mutant was generated with thermostability (Tm = 57.8 degrees C) at the level of thermophilic HUBst. Employing the same strategy, we generated several mutants in the extremely thermophilic HUTmar from Thermotoga maritima (Tm = 80.5 degrees C), and obtained data consistent with the previous results. The triplet mutant HUTmar-G15E/E34D/V421 (Tm = 35.9 degrees C) converted the extremely thermophilic protein HUTmar to mesophilic. The various forms of HU proteins were overproduced in Escherichia coli, highly purified, and the thermostability of the mutants confirmed by circular dichroism spectroscopy. The results presented here were elucidated on the basis of the X-ray structure of HUBst and HUTmar (our unpublished results), and their mechanism was proposed at the molecular level. The results clearly show that three individual local interactions located at the helix-turn-helix part of the protein are responsible for the stability of HU proteins by acting cooperatively in a common mechanism for thermostability.     

Enhancing thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2 by DNA shuffling

DNA shuffling was used to improve the thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2. Two highly thermostable mutants, III-1 and III-2, were generated after three rounds of shuffling and recombination of mutations. Their optimal reaction temperatures were all 80 degrees C, which was 10 degrees C higher than that of the wild-type. The mutant enzyme III-1 carried seven mutations: N147D, F195L, N263S, D311G, A344V, F397S, and N508D. The half-life of III-1 was about 20 times greater than that of the wild-type at 78 degrees C. The mutant enzyme III-2 carried M375T in addition to the mutations in III-1, which was responsible for the decrease in specific activity. The half-life of III-2 was 568 min while that of the wild-type was < 1 min at 80 degrees C. The melting temperatures of III-1 and III-2, as determined by differential scanning calorimetry, increased by 6.1 degrees C and 11.4 degrees C, respectively. Hydrogen bonding, hydrophobic interaction, electrostatic interaction, proper packing, and deamidation were predicted as the mechanisms for the enhancement of thermostability in the enzymes with the mutations.     

易错PCR提高华根霉脂肪酶的热稳定性

为了提高华根霉Rhizopus chinensis CCTCC M201021脂肪酶的热稳定性,运用定向进化-易错PCR的方法,经两轮易错PCR引入突变,利用fast-blue RR顶层琼脂法对突变文库进行筛选,第一轮易错PCR后筛选到2株突变菌株,第二轮筛选到4株突变株。第二轮最佳突变株Ep2-4,其中3个氨基酸发生了突变：A129S、P168L和V329A。该突变酶ep2-4在60 ℃下半衰期相对原始酶r27RCL提高5.4倍,T50值提高7.8 ℃。酶学性质研究表明,突变酶ep2-4在热稳定性提高的基础上,仍保有良好的催化活性。蛋白质三维结构模拟显示,突变A129S可以和Gln133形成氢键,增加了酶表面的亲水性和极性;P168L可以与邻近的Leu164形成疏水键,导致突变酶的热稳定性提高。