Directed evolution of N-carbamyl-D-amino acid amidohydrolase for simultaneous improvement of oxidative and thermal stability

Directed evolution of N-carbamyl-D-amino acid amidohydrolase from Agrobacterium tumefaciens NRRL B11291 was attempted in order to simultaneously improve oxidative and thermal stability. A mutant library was generated by DNA shuffling, and positive clones with improved oxidative and thermal stability were screened on the basis of the activity staining method on a solid agar plate containing pH indicator (phenol red) and substrate (N-carbamyl-D-p-hydroxyphenylglycine). Two rounds of directed evolution resulted in the best mutant 2S3 with a significantly improved stability. Oxidative stability of the evolved enzyme 2S3 was about 18-fold higher than that of the wild type, and it also showed an 8-fold increased thermostability. The K(m) value of 2S3 was comparable to that of wild-type enzyme, but k(cat) was slightly decreased. DNA sequence analysis revealed that six amino acid residues (Q23L, V40A, H58Y, G75S, M184L, and T262A) were substituted in 2S3. From the mutational analysis, four mutations (Q23L, H58Y, M184L, and T262A) were found to lead to an improvement of both oxidative and thermal stability. Of them, T262A had the most significant effect, and V40A and G75S only increased the oxidative stability.     

Directed evolution of Thermus maltogenic amylase toward enhanced thermal resistance

The thermostability of maltogenic amylase from Thermus sp. strain IM6501 (ThMA) was improved greatly by random mutagenesis using DNA shuffling. Four rounds of DNA shuffling and subsequent recombination of the mutations produced the highly thermostable mutant enzyme ThMA-DM, which had a total of seven individual mutations. The seven amino acid substitutions in ThMA-DM were identified as R26Q, S169N, I333V, M375T, A398V, Q411L, and P453L. The optimal reaction temperature of the recombinant enzyme was 75 degrees C, which was 15 degrees C higher than that of wild-type ThMA, and the melting temperature, as determined by differential scanning calorimetry, was increased by 10.9 degrees C. The half-life of ThMA-DM was 172 min at 80 degrees C, a temperature at which wild-type ThMA was completely inactivated in less than 1 min. Six mutations that were generated during the evolutionary process did not significantly affect the specific activity of the enzyme, while the M375T mutation decreased activity to 23% of the wild-type level. The molecular interactions of the seven mutant residues that contributed to the increased thermostability of the mutant enzyme with other adjacent residues were examined by comparing the modeled tertiary structure of ThMA-DM with those of wild-type ThMA and related enzymes. The A398V and Q411L substitutions appeared to stabilize the enzyme by enhancing the interdomain hydrophobic interactions. The R26Q and P453L substitutions led potentially to the formation of genuine hydrogen bonds. M375T, which was located near the active site of ThMA, probably caused a conformational or dynamic change that enhanced thermostability but reduced the specific activity of the enzyme.     

Directed evolution of <Emphasis Type="Italic">Streptomyces lividans</Emphasis> xylanase B toward enhanced thermal and alkaline pH stability

The thermal and alkaline pH stability of Streptomyces lividans xylanase B was improved greatly by random mutagenesis using DNA shuffling. Positive clones with improved thermal stability in an alkaline buffer were screened on a solid agar plate containing RBB-xylan (blue). Three rounds of directed evolution resulted in the best mutant enzyme 3SlxB6 with a significantly improved stability. The recombinant enzyme exhibited significant thermostability at 70°C for 360 min, while the wild-type lost 50% of its activity after only 3 min. In addition, mutant enzyme 3SlxB6 shows increased stability to treatment with pH 9.0 alkaline buffer. The K _m value of 3SlxB6 was estimated to be similar to that of wild-type enzyme; however k _cat was slightly decreased, leading to a slightly reduced value of k _cat/K _m, compared with wild-type enzyme. DNA sequence analysis revealed that eight amino acid residues were changed in 3SlxB6 and substitutions included V3A, T6S, S23A, Q24P, M31L, S33P, G65A, and N93S. The stabilizing effects of each amino acid residue were investigated by incorporating mutations individually into wild-type enzyme. Our results suggest that DNA shuffling is an effective approach for simultaneous improvement of thermal and alkaline pH stability of Streptomyces lividans xylanase B even without structural information.     

Enhancement of thermostability of fungal deglycating enzymes by directed evolution

Fructosyl peptide oxidases are valuable for the determination of glycoproteins such as hemoglobin A1c. For practical use in clinical diagnosis, we applied directed evolution to improve the thermostability of these enzymes. After two rounds of random mutagenesis and high-throughput screening, six thermostabilizing amino acid substitutions were identified. Therefore, site-directed and cassette mutageneses were applied to combine these six stabilizing mutations. The simultaneous mutants showed that the stabilizing effect of the amino acid replacement was cumulative. The sextuple mutant enzyme, R94K/G184D/F265L/N272D/H302R/H388Y, had a half-life of thermal inactivation at 50°C that was 79.8-fold longer than that of the parental fructosyl peptide oxidase. The thermostable variants also showed increased tolerance to digestion by a protease. The sextuple mutant enzyme did not lose its activity on incubation with neutral protease, while the wild-type enzyme almost completely lost its activity. Furthermore, three amino acid substitutions were introduced into another fructosyl peptide oxidase with a different substrate specificity. The half-life of inactivation at 50°C was 3.61-fold longer than that of the parent enzyme. These engineered fructosyl peptide oxidases will be useful for industrial application to clinical diagnosis.     

Directed evolution converts subtilisin E into a functional equivalent of thermitase

We used directed evolution to convert Bacillus subtilis subtilisin E into an enzyme functionally equivalent to its thermophilic homolog thermitase from Thermoactinomyces vulgaris. Five generations of random mutagenesis, recombination and screening created subtilisin E 5-3H5, whose half-life at 83 degrees C (3.5 min) and temperature optimum for activity (Topt, 76 degrees C) are identical with those of thermitase. The Topt of the evolved enzyme is 17 degrees C higher and its half-life at 65 degrees C is >200 times that of wild-type subtilisin E. In addition, 5-3H5 is more active towards the hydrolysis of succinyl-Ala-Ala-Pro-Phe-p-nitroanilide than wild-type at all temperatures from 10 to 90 degrees C. Thermitase differs from subtilisin E at 157 amino acid positions. However, only eight amino acid substitutions were sufficient to convert subtilisin E into an enzyme equally thermostable. The eight substitutions, which include known stabilizing mutations (N218S, N76D) and also several not previously reported, are distributed over the surface of the enzyme. Only two (N218S, N181D) are found in thermitase. Directed evolution provides a powerful tool to unveil mechanisms of thermal adaptation and is an effective and efficient approach to increasing thermostability without compromising enzyme activity.     

The use of forced protein evolution to investigate and improve stability of family 10 xylanases. The production of Ca2+-independent stable xylanases

Metal ions such as calcium often play a key role in protein thermostability. The inclusion of metal ions in industrial processes is, however, problematic. Thus, the evolution of enzymes that display enhanced stability, which is not reliant on divalent metals, is an important biotechnological goal. Here we have used forced protein evolution to interrogate whether the stabilizing effect of calcium in an industrially relevant enzyme can be replaced with amino acid substitutions. Our study has focused on the GH10 xylanase CjXyn10A from Cellvibrio japonicus, which contains an extended calcium binding loop that confers proteinase resistance and thermostability. Three rounds of error-prone PCR and selection identified a treble mutant, D262N/A80T/R347C, which in the absence of calcium is more thermostable than wild type CjXyn10A bound to the divalent metal. D262N influences the properties of the calcium binding site, A80T fills a cavity in the enzyme, increasing the number of hydrogen bonds and van der Waals interactions, and the R347C mutation introduces a disulfide bond that decreases the free energy of the unfolded enzyme. A derivative of CjXyn10A (CfCjXyn10A) in which the calcium binding loop has been replaced with a much shorter loop from Cellulomonas fimi CfXyn10A was also subjected to forced protein evolution to select for thermostablizing mutations. Two amino acid substitutions within the introduced loop and the A80T mutation increased the thermostability of the enzyme. This study demonstrates how forced protein evolution can be used to introduce enhanced stability into industrially relevant enzymes while removing calcium as a major stability determinant.     

Enhancement of the thermostability of thermophilic bacterium PS-3 PPase on substitution of Ser-89 with carboxylic amino acids

Serine 89 of the inorganic pyrophosphatase (PPase) subunit from thermophilic bacterium PS-3 (PS-3) was replaced with glycine, alanine, threonine, glutamic acid, or aspartic acid by the PCR-mutagenesis method with Mut-1 in order to determine the contribution of this serine residue to the thermostability and structural integrity of the enzyme molecule. S89G, S89A, and S89T showed reduced catalytic activity, whereas S89D and S89E showed increased enzyme activity. S89G, S89A, and S89T as well as the wild-type PPase were stable in the presence of 5 mM MgCl(2) at 70 degrees C for 1 h, but were inactivated rapidly with time at 80 degrees C. On the contrary, S89D and S89E were stable at 80 degrees C, showing more than 95% of the original activity after 1 h incubation. The wild-type PPase, S89D and S89E were each a hexamer before and after incubation at 80 degrees C for 1 h, while S89G and S89A comprised a mixture of a hexamer and a trimer both before and after incubation at 80 degrees C for 1 h. On the other hand, S89T was a mixture of a hexamer, a trimer and a monomer, and it was partially precipitated during heat treatment at 80 degrees C. The CD spectra of the recombinant enzymes in the far-ultraviolet region were the same as that of the wild-type PPase, whereas those of S89G, S89A, and S89T as well as the wild-type PPase were markedly different after heat treatment, although those of S89D and S89E did not change. The present study suggested that local small change(s) in the network of interactions among amino acid residues on replacement at position 89 led to the PS-3 PPase molecule being unable to form a hexamer from trimers or to dissociate into monomers in some cases without a significant change in the backbone conformation. It was also suggested that the partial disordering of the conformation of PS-3 PPase caused by heat depended on the degree of hydrophilicity in the vicinity of position 89.     

易错PCR提高华根霉脂肪酶的热稳定性

为了提高华根霉Rhizopus chinensis CCTCC M201021脂肪酶的热稳定性,运用定向进化-易错PCR的方法,经两轮易错PCR引入突变,利用fast-blue RR顶层琼脂法对突变文库进行筛选,第一轮易错PCR后筛选到2株突变菌株,第二轮筛选到4株突变株。第二轮最佳突变株Ep2-4,其中3个氨基酸发生了突变：A129S、P168L和V329A。该突变酶ep2-4在60 ℃下半衰期相对原始酶r27RCL提高5.4倍,T50值提高7.8 ℃。酶学性质研究表明,突变酶ep2-4在热稳定性提高的基础上,仍保有良好的催化活性。蛋白质三维结构模拟显示,突变A129S可以和Gln133形成氢键,增加了酶表面的亲水性和极性;P168L可以与邻近的Leu164形成疏水键,导致突变酶的热稳定性提高。     

Alteration of substrate specificity of cholesterol oxidase from Streptomyces sp. by site-directed mutagenesis

Despite the structural similarities between cholesterol oxidase from Streptomyces and that from Brevibacterium, both enzymes exhibit different characteristics, such as catalytic activity, optimum pH and temperature. In attempts to define the molecular basis of differences in catalytic activity or stability, substitutions at six amino acid residues were introduced into cholesterol oxidase using site-directed mutagenesis of its gene. The amino acid substitutions chosen were based on structural comparisons of cholesterol oxidases from Streptomyces and BREVIBACTERIUM: Seven mutant enzymes were constructed with the following amino acid substitutions: L117P, L119A, L119F, V145Q, Q286R, P357N and S379T. All the mutant enzymes exhibited activity with the exception of that with the L117P mutation. The resulting V145Q mutant enzyme has low activities for all substrates examined and the S379T mutant enzyme showed markedly altered substrate specificity compared with the wild-type enzyme. To evaluate the role of V145 and S379 residues in the reaction, mutants with two additional substitutions in V145 and four in S379 were constructed. The mutant enzymes created by the replacement of V145 by Asp and Glu had much lower catalytic efficiency for cholesterol and pregnenolone as substrates than the wild-type enzyme. From previous studies and this study, the V145 residue seems to be important for the stability and substrate binding of the cholesterol oxidase. In contrast, the catalytic efficiencies (k(cat)/K(m)) of the S379T mutant enzyme for cholesterol and pregnenolone were 1.8- and 6.0-fold higher, respectively, than those of the wild-type enzyme. The enhanced catalytic efficiency of the S379T mutant enzyme for pregnenolone was due to a slightly high k(cat) value and a low K(m) value. These findings will provide several ideas for the design of more powerful enzymes that can be applied to clinical determination of serum cholesterol levels and as sterol probes.     

Cumulative effect of amino acid replacements results in enhanced thermostability of potato type L alpha-glucan phosphorylase

The thermostability of potato type L alpha-glucan phosphorylase (EC 2.4.1.1) was enhanced by random and site-directed mutagenesis. We obtained three single-residue mutations-Phe39-->Leu (F39L), Asn135-->Ser (N135S), and Thr706-->Ile (T706I)-by random mutagenesis. Although the wild-type enzyme was completely inactivated, these mutant enzymes retained their activity even after heat treatment at 60 degrees C for 2 h. Combinations of these mutations were introduced by site-directed mutagenesis. The simultaneous mutation of two (F39L/N135S, F39L/T706I, and N135S/T706I) or three (F39L/N135S/T706I) residues further increased the thermostability of the enzyme, indicating that the effect of the replacement of the residues was cumulative. The triple-mutant enzyme, F39L/N135S/T706I, retained 50% of its original activity after heat treatment at 65 degrees C for 20 min. Further analysis indicated that enzymes with a F39L or T706I mutation were resistant to possible proteolytic degradation.     

Enhancing thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2 by DNA shuffling

DNA shuffling was used to improve the thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2. Two highly thermostable mutants, III-1 and III-2, were generated after three rounds of shuffling and recombination of mutations. Their optimal reaction temperatures were all 80 degrees C, which was 10 degrees C higher than that of the wild-type. The mutant enzyme III-1 carried seven mutations: N147D, F195L, N263S, D311G, A344V, F397S, and N508D. The half-life of III-1 was about 20 times greater than that of the wild-type at 78 degrees C. The mutant enzyme III-2 carried M375T in addition to the mutations in III-1, which was responsible for the decrease in specific activity. The half-life of III-2 was 568 min while that of the wild-type was < 1 min at 80 degrees C. The melting temperatures of III-1 and III-2, as determined by differential scanning calorimetry, increased by 6.1 degrees C and 11.4 degrees C, respectively. Hydrogen bonding, hydrophobic interaction, electrostatic interaction, proper packing, and deamidation were predicted as the mechanisms for the enhancement of thermostability in the enzymes with the mutations.     

Mutations of barley β-amylase that improve substrate-binding affinity and thermostability

Three allelic forms of barley beta-amylase (Sd1, Sd2H and Sd2L) exhibit different thermostability and kinetic properties. These differences critically influence the malting quality of barley varieties. To understand the molecular basis for the different properties of these three allelic forms, Sd1 and Sd2L beta-amylase cDNAs were cloned, and the effects of the amino acid substitutions between them were evaluated by site-directed mutagenesis. The results showed that an R115C mutation is responsible for the difference in kinetic properties. This substitution resulted in an additional hydrogen bond which may create a more favourable environment for substrate-binding. The different thermostabilities of the beta-amylase forms are due to two amino acid substitutions (V233A and L347S), which increased the enzyme's thermostability index T50 by 1.9 degrees C and 2.1 degrees C, respectively. The increased thermostability associated with these two mutations may be due to relief of steric strain and the interaction of the protein surface with solvent water. Although both V233A and L347S mutations increased thermostability, they affected the thermostability in different ways. The replacement of L347 by serine seems to increase the thermostability by slowing thermal unfolding of the protein during heating, while the replacement of V233 by alanine appears to cause an acceleration of the refolding after heating. Because the different beta-amylase properties determined by the three mutations (R115C, V233A and L347S) are associated with malting quality of barley variety, a mutant with high thermostability and substrate-binding affinity was generated by combining the three preferred amino acid residues C115, A233 and S347 together. A possible approach to producing barley varieties with better malting quality by genetic engineering is discussed.     

The consensus concept for thermostability engineering of proteins: further proof of concept

Previously, we calculated a consensus amino acid sequence from 13 homologous fungal phytases. A synthetic gene was constructed and recombinantly expressed. Surprisingly, consensus phytase-1 was 15-26 degrees C more thermostable than all parent phytases used in its design [Lehmann et al. (2000)Protein Eng., 13, 49-57]. In the present study, inclusion of six further phytase sequences in the amino acid sequence alignment resulted in the replacement of 38 amino acid residues in either one or both of the new consensus phytases-10 and -11. Since consensus phytase-10, again, was 7.4 degrees C more thermostable than consensus phytase-1, the thermostability effects of most of the 38 amino acid substitutions were tested by site-directed mutagenesis. Both stabilizing and destabilizing mutations were identified, but all affected the stability of the enzyme by <3 degrees C. The combination of all stabilizing amino acid exchanges in a multiple mutant of consensus phytase-1 increased the unfolding temperature from 78.0 to 88.5 degrees C. Likewise, back-mutation of four destabilizing amino acids and introduction of an additional stabilizing amino acid in consensus phytase-10 further increased the unfolding temperature from 85.4 to 90.4 degrees C. The thermostabilization achieved is the result of a combination of slight improvements from multiple amino acid exchanges rather than being the effect of a single or of just a few dominating mutations that have been introduced by chance. The present findings support the general validity of the consensus concept for thermostability engineering of proteins.     

Directed evolution study of temperature adaptation in a psychrophilic enzyme

We have used laboratory evolution methods to enhance the thermostability and activity of the psychrophilic protease subtilisin S41, with the goal of investigating the mechanisms by which this enzyme can adapt to different selection pressures. A combined strategy of random mutagenesis, saturation mutagenesis and in vitro recombination (DNA shuffling) was used to generate mutant libraries, which were screened to identify enzymes that acquired greater thermostability without sacrificing low-temperature activity. The half-life of seven-amino acid substitution variant 3-2G7 at 60 degrees C is approximately 500 times that of wild-type and far surpasses those of homologous mesophilic subtilisins. The dependence of half-life on calcium concentration indicates that enhanced calcium binding is largely responsible for the increased stability. The temperature optimum of the activity of 3-2G7 is shifted upward by approximately 10 degrees C. Unlike natural thermophilic enzymes, however, the activity of 3-2G7 at low temperatures was not compromised. The catalytic efficiency, k(cat)/K(M), was enhanced approximately threefold over a wide temperature range (10 to 60 degrees C). The activation energy for catalysis, determined by the temperature dependence of k(cat)/K(M) in the range 15 to 35 degrees C, is nearly identical to wild-type and close to half that of its highly similar mesophilic homolog, subtilisin SSII, indicating that the evolved S41 enzyme retained its psychrophilic character in spite of its dramatically increased thermostability. These results demonstrate that it is possible to increase activity at low temperatures and stability at high temperatures simultaneously. The fact that enzymes displaying both properties are not found in nature most likely reflects the effects of evolution, rather than any intrinsic physical-chemical limitations on proteins.     

The effect of proline insertions on the thermostability of a barley alpha-glucosidase

The thermal stability of alpha-glucosidase is important because the conversion of starch to fermentable sugars during industrial production of ethanol (e.g. brewing, fuel ethanol production) typically takes place at temperatures of 65-73 degrees C. In this study we investigate the thermostability of alpha-glucosidases from four plant species, compare their deduced amino acid sequences, and test the effect of substituting a proline for the residue present in the wild-type enzyme on the thermostability of alpha-glucosidase. The alpha-glucosidase from barley (Hordeum vulgare) was significantly less thermostable than the other three alpha-glucosidases. A comparison of the published deduced amino acid sequences of these four alpha-glucosidases revealed conserved proline residues in the three most thermostable alpha-glucosidases that were not found in the barley enzyme. Site-directed mutagenesis was done on recombinant barley alpha-glucosidase to create proteins with prolines at these conserved positions. The thermostability (T(50)) of one of these mutant enzymes, T340P, was 10 degrees C higher than the non-mutated enzyme.     

Directed Evolution of Thermus Maltogenic Amylase toward Enhanced Thermal Resistance

The thermostability of maltogenic amylase from Thermus sp. strain IM6501 (ThMA) was improved greatly by random mutagenesis using DNA shuffling. Four rounds of DNA shuffling and subsequent recombination of the mutations produced the highly thermostable mutant enzyme ThMA-DM, which had a total of seven individual mutations. The seven amino acid substitutions in ThMA-DM were identified as R26Q, S169N, I333V, M375T, A398V, Q411L, and P453L. The optimal reaction temperature of the recombinant enzyme was 75°C, which was 15°C higher than that of wild-type ThMA, and the melting temperature, as determined by differential scanning calorimetry, was increased by 10.9°C. The half-life of ThMA-DM was 172 min at 80°C, a temperature at which wild-type ThMA was completely inactivated in less than 1 min. Six mutations that were generated during the evolutionary process did not significantly affect the specific activity of the enzyme, while the M375T mutation decreased activity to 23% of the wild-type level. The molecular interactions of the seven mutant residues that contributed to the increased thermostability of the mutant enzyme with other adjacent residues were examined by comparing the modeled tertiary structure of ThMA-DM with those of wild-type ThMA and related enzymes. The A398V and Q411L substitutions appeared to stabilize the enzyme by enhancing the interdomain hydrophobic interactions. The R26Q and P453L substitutions led potentially to the formation of genuine hydrogen bonds. M375T, which was located near the active site of ThMA, probably caused a conformational or dynamic change that enhanced thermostability but reduced the specific activity of the enzyme.     

Role of proline residues in conferring thermostability on aqualysin I

To understand the molecular basis of the thermostability of a thermophilic serine protease aqualysin I from Thermus aquaticus YT-1, we introduced mutations at Pro5, Pro7, Pro240 and Pro268, which are located on the surface loops of aqualysin I, by changing these amino acid residues into those found at the corresponding locations in VPR, a psychrophilic serine protease from Vibrio sp. PA-44. All mutants were expressed stably and exhibited essentially the same specific activity as wild-type aqualysin I at 40 degrees C. The P240N mutant protein had similar thermostability to wild-type aqualysin I, but P5N and P268T showed lower thermostability, with a half-life at 90 degrees C of 15 and 30 min, respectively, as compared to 45 min for the wild-type enzyme. The thermostability of P7I was decreased even more markedly, and the mutant protein was rapidly inactivated at 80 degrees C and even at 70 degrees C, with half-lives of 10 and 60 min, respectively. Differential scanning calorimetry analysis showed that the transition temperatures of wild-type enzyme, P5N, P7I, P240N and P268T were 93.99 degrees C, 83.45 degrees C, 75.66 degrees C, 91.78 degrees C and 86.49 degrees C, respectively. These results underscore the importance of the proline residues in the N- and C-terminal regions of aqualysin I in maintaining the integrity of the overall protein structure at elevated temperatures.     

Thermostabilization of bacterial fructosyl-amino acid oxidase by directed evolution

We succeeded in isolating several thermostable mutant fructosyl-amino acid oxidase (FAOX; EC 1.5.3) without reduction of productivity by directed evolution that combined an in vivo mutagenesis and membrane assay screening system. Five amino acid substitutions (T60A, A188G, M244L, N257S, and L261M) occurred in the most thermostable mutant obtained by a fourth round of directed evolution. This altered enzyme, FAOX-TE, was stable at 45 degrees C, whereas the wild-type enzyme was not stable above 37 degrees C. The K(m) values of FAOX-TE for D-fructosyl-L-valine and D-fructosyl-glycine were 1.50 and 0.58 mM, respectively, in contrast with corresponding values of 1.61 and 0.74 mM for the wild-type enzyme. This altered FAOX-TE will be useful in the diagnosis of diabetes.     

Increased thermostability of microbial transglutaminase by combination of several hot spots evolved by random and saturation mutagenesis

The thermostability of microbial transglutaminase (MTG) of Streptomyces mobaraensis was further improved by saturation mutagenesis and DNA-shuffling. High-throughput screening was used to identify clones with increased thermostability at 55°C. Saturation mutagenesis was performed at seven "hot spots", previously evolved by random mutagenesis. Mutations at four positions (2, 23, 269, and 294) led to higher thermostability. The variants with single amino acid exchanges comprising the highest thermostabilities were combined by DNA-shuffling. A library of 1,500 clones was screened and variants showing the highest ratio of activities after incubation for 30 min at 55°C relative to a control at 37°C were selected. 116 mutants of this library showed an increased thermostability and 2 clones per deep well plate were sequenced (35 clones). 13 clones showed only the desired sites without additional point mutations and eight variants were purified and characterized. The most thermostable mutant (triple mutant S23V-Y24N-K294L) exhibited a 12-fold higher half-life at 60°C and a 10-fold higher half-life at 50°C compared to the unmodified recombinant wild-type enzyme. From the characterization of different triple mutants differing only in one amino acid residue, it can be concluded that position 294 is especially important for thermostabilization. The simultaneous exchange of amino acids at sites 23, 24, 269 and 289 resulted in a MTG-variant with nearly twofold higher specific activity and a temperature optimum of 55°C. A triple mutant with amino acid substitutions at sites 2, 289 and 294 exhibits a temperature optimum of 60°C, which is 10°C higher than that of the wild-type enzyme.