Novel textile chitosan scaffolds promote spreading, proliferation, and differentiation of osteoblasts

Two novel scaffold models made of chitosan fibers were designed, fabricated, and investigated. Raw chitosan fibers were either tightened between plastic rings or were processed into stand-alone scaffolds. Chitosan fiber scaffolds were further modified by coating with a thin layer of fibrillar collagen type I to biologize the surface. Cell culture experiments were carried out using murine osteoblast-like cells (7F2). Confocal laser scanning microscopy (cLSM) as well as scanning electron microscopy (SEM) revealed fast attachment and morphological adaptation of the cells on both the raw chitosan fibers and the collagen-coated scaffolds. Cells were cultivated for up to 4 weeks on the materials and proliferation as well as osteogenic differentiation was quantitatively analyzed in terms of lactate dehydrogenase (LDH) and alkaline phosphatase (ALP) activity. We found a 14-16-fold increase of cell number and the typical pattern of ALP activity, whereas the collagen coating does not remarkably influence these parameters. The maintenance of osteogenic phenotype on the novel materials was furthermore confirmed by immunostaining of osteocalcin and study of matrix mineralization. The feature of the collagen-coated but also the raw chitosan fiber scaffolds to support the attachment, proliferation, and differentiation of osteoblast-like cells suggest a potential application of chitosan fibers and textile chitosan scaffolds for the tissue engineering of bone.     

Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) improved osteogenic differentiation of the human induced pluripotent stem cells while considered as an artificial extracellular matrix

Cocell polymers can be the best implants for replacing bone defects in patients. The pluripotent stem cells produced from the patient and the nanofibrous polymeric scaffold that can be completely degraded in the body and its produced monomers could be also usable are the best options for this implant. In this study, electrospun poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanofibers were fabricated and characterized and then osteogenic differentiation of the human-induced pluripotent stem cells (iPSCs) was investigated while cultured on PHBV scaffold. MTT results showed that cultured iPSCs on PHBV proliferation were increased compared to those cultured on tissue culture polystyrene (TCPS) as the control. Alkaline phosphatase (ALP) activity and calcium content were also significantly increased in iPSCs cultured on PHBV compared to the cultured on TCPS under osteogenic medium. Gene expression evaluation demonstrated that Runx2, collagen type I, ALP, osteonectin, and osteocalcin were upregulated in iPSCs cultured on PHBV scaffold in comparison with those cultured on TCPS for 2 weeks. Western blot analysis have shown that osteocalcin and osteopontin expression as two major osteogenic markers were increased in iPSCs cultured on PHBV scaffold. According to the results, nanofiber-based PHBV has a promising potential to increase osteogenic differentiation of the stem cells and iPSCs-PHBV as a cell-co-polymer construct demonstrated that has a great efficiency for use as a bone tissue engineered bioimplant.     

The development and identification of constructing tissue engineered bone by seeding osteoblasts from differentiated rat marrow stromal stem cells onto three-dimensional porous nano-hydroxylapatite bone matrix in vitro

The purposes of this study were to develop a new cultural method for the rat bone marrow stromal cells (MSCs) to differentiate into osteoblasts well in vitro, and to investigate the feasibility of using MSCs as seed cells and three-dimensional porous nano-hydroxylapatite as scaffolds for constructing tissue-engineered bone. MSCs of rats were isolated, cultured, induced to differentiate into osteoblasts, and then observed with inverted microscopy. Histochemical staining and radio-immunological analysis were applied for identifying MSCs. Whereafter MSCs were seeded onto three-dimensional porous nano-hydroxylapatite scaffolds, and scanning electron microscopy was applied to evaluate their growth on scaffolds. Results showed that MSCs were typical fibroblast-like and possessed a better proliferating capability; the activity of alkaline phosphatase (ALP) and the secretion of osteocalcin of MSCs were produced gradually and increased continuously; the cells seeded on three-dimensional porous nano-hydroxylapatite scaffolds adhered, proliferated and differentiated well. These results demonstrated that the new improved culture method had the advantages of short isolating time, less risk of contamination and higher efficiency and accordingly was conducive to MSCs proliferating and differentiating into osteoblasts, and that it was advantageous to constructing tissue-engineered bone using MSCs as seed cells and three-dimensional porous nano-hydroxylapatite as scaffolds.     

Engineered Smooth Muscle Tissues: Regulating Cell Phenotype with the Scaffold

Culturing cells on three-dimensional, biodegradable scaffolds may create tissues suitable either for reconstructive surgery applications or as novel in vitro model systems. In this study, we have tested the hypothesis that the phenotype of smooth muscle cells (SMCs) in three-dimensional, engineered tissues is regulated by the chemistry of the scaffold material. Specifically, we have directly compared cell growth and patterns of extracellular matrix (ECM) (e.g. , elastin and collagen) gene expression on two types of synthetic polymer scaffolds and type I collagen scaffolds. The growth rates of SMCs on the synthetic polymer scaffolds were significantly higher than on type I collagen sponges. The rate of elastin production by SMCs on polyglycolic acid (PGA) scaffolds was 3.5 +/- 1.1-fold higher than that on type I collagen sponges on Day 11 of culture. In contrast, the collagen production rate on type I collagen sponges was 3.3 +/- 1.1-fold higher than that on PGA scaffolds. This scaffold-dependent switching between elastin and collagen gene expression was confirmed by Northern blot analysis. The finding that the scaffold chemistry regulates the phenotype of SMCs independent of the scaffold physical form was confirmed by culturing SMCs on two-dimensional films of the scaffold materials. It is likely that cells adhere to these scaffolds via different ligands, as the major protein adsorbed from the serum onto synthetic polymers was vitronectin, whereas fibronectin and vitronectin were present at high density on type I collagen sponges. In summary, this study demonstrates that three-dimensional smooth muscle-like tissues can be created by culturing SMCs on three-dimensional scaffolds, and that the phenotype of the SMCs is strongly regulated by the scaffold chemistry. These engineered tissues provide novel, three-dimensional models to study cellular interaction with ECM in vitro.     

Comparative evaluation of morphology and osteogenic behavior of human Wharton's jelly mesenchymal stem cells on 2D culture plate and 3D biomimetic scaffold

Expansion of seeded human Wharton's jelly mesenchymal stem cells (hWJ-MSCs) on 2D culture plates and 3D nano-hydroxyapatite/chitosan/gelatin scaffolds, from morphology and osteoactivity points of view, were investigated. Cell attachment and spreading, temporal expression profiles of selected osteogenic gene and protein markers, intracellular alkaline phosphatase enzyme activity (ALP activity), and matrix mineralization were assayed over the course of the experiments. Morphological results demonstrated hWJ-MSCs had greater affinity to adhere onto the 3D scaffold surface, as the number and thickness of the filopodia were higher in the 3D compared with 2D culture system. Functionally, the intracellular ALP activity and extracellular mineralization in 3D scaffolds were significantly greater, in parallel with elevation of osteogenic markers at the mRNA and protein levels at all-time point. It is concluded that 3D scaffolds, more so than 2D culture plate, promote morphology and osteogenic behavior of WJ-MSCs in vitro, a promising system for MSCs expansion without compromising their stemness before clinical transplantation.     

Osteogenic differentiation of human adipose tissue-derived stromal cells (hASCs) in a porous three-dimensional scaffold

Recent studies have shown that liposuction aspirates from rat, rabbit, mouse, and human sources contain pluripotent adipose tissue-derived stromal cells (ASCs) that can differentiate into various mesodermal cell types, including osteoblasts, myoblasts, chondroblasts, and preadipocytes. To develop a research model for autologous bone tissue engineering, we isolated ASCs from human liposuction aspirates (hASCs) and induced their osteogenic differentiation in three-dimensional poly(dl-lactic-co-glycolic acid) (PLGA) scaffolds. Human liposuction aspirates were proteolytically digested and centrifuged to obtain hASCs. After primary culture in control media and expansion to three passages, the cells were seeded in two-dimensional plates or three-dimensional PLGA scaffolds and cultured in osteogenic media for 4 weeks. In two-dimensional culture, osteogenesis was assessed by RT-PCR analysis of the osteogenic-specific bone sialoprotein mRNA, by alkaline phosphatase staining, and by von Kossa staining. In three-dimensional culture, osteogenesis was assessed by von Kossa and alizarine red S staining at 1, 2, and 4 weeks following osteogenic induction. hASCs incubated in two-dimensional osteogenic media stained positively for alkaline phosphatase and with von Kossa stain after 2 weeks of differentiation. Expression of the osteogenesis-specific bone sialoprotein gene was detected by RT-PCR after 2 weeks of differentiation. PLGA scaffolds seeded with hASCs showed multiple calcified extracellular matrix nodules by von Kossa and alizarine red S staining after 2 weeks of differentiation. In conclusion, the authors identified an osteogenic potential of hASCs and demonstrated osteogenic differentiation of hASCs into an osteogenic lineage in three-dimensional PLGA scaffolds.     

Polymeric vs hydroxyapatite-based scaffolds on dental pulp stem cell proliferation and differentiation

AIM: To evaluate adhesion, proliferation and differentiation of human dental pulp stem cells (hDPSCs) on four commercially available scaffold biomaterials.METHODS: hDPSCs were isolated from human dental pulp tissues of extracted wisdom teeth and established in stem cell growth medium. hDPSCs at passage 3-5 were seeded on four commercially available scaffold biomaterials, SureOss (Allograft), Cerabone (Xenograft), PLLA (Synthetic), and OSTEON II Collagen (Composite), for 7 and 14 d in osteogenic medium. Cell adhesion and morphology to the scaffolds were evaluated by scanning electron microscopy (SEM). Cell proliferation and differentiation into osteogenic lineage were evaluated using DNA counting and alkaline phosphatase (ALP) activity assay, respectively.RESULTS: All scaffold biomaterials except SureOss (Allograft) supported hDPSC adhesion, proliferation and differentiation. hDPSCs seeded on PLLA (Synthetic) scaffold showed the highest cell proliferation and attachment as indicated with both SEM and DNA counting assay. Evaluating the osteogenic differentiation capability of hDPSCs on different scaffold biomaterials with ALP activity assay showed high level of ALP activity on cells cultured on PLLA (Synthetic) and OSTEON II Collagen (Composite) scaffolds. SEM micrographs also showed that in the presence of Cerabone (Xenograft) and OSTEON II Collagen (Composite) scaffolds, the hDPSCs demonstrated the fibroblastic phenotype with several cytoplasmic extension, while the cells on PLLA scaffold showed the osteoblastic-like morphology, round-like shape.CONCLUSION: PLLA scaffold supports adhesion, proliferation and osteogenic differentiation of hDPSCs. Hence, it may be useful in combination with hDPSCs for cell-based reconstructive therapy.     

Donepezil hydrochloride as a novel inducer for osteogenic differentiation of mesenchymal stem cells on PLLA scaffolds in vitro

Over the past decades, bone defects caused by illness or trauma have been the most common traumatic injuries in humans and treatment of orthopedic infections has always been a serious challenge to experts in the world. In this project, poly L-lactic acid (PLLA) nanofibrous scaffolds were synthesized as a nontoxic, eco-friendly, and cost-effective scaffold by the electrospinning technique. Then, the impact of PLLA on the cell proliferation and osteogenic differentiation of human mesenchymal stem cells (hMSCs) was assayed in the presence and absence of donepezil hydrochloride (DH) which was prescribed in patients with Alzheimer's disease. Also, hMSCs were seeded on PLLA scaffold in the presence (PLLA-DH) and absence of 1 μg mL^-1 of DH under osteogenic induction media. Osteogenic differentiation of hMSCs was assessed by specific bone-related tests including alkaline phosphatase (ALP) activity, Alizarin red and von Kossa staining, calcium content assay. Also, Osteocalcin and osteopontin were evaluated as osteogenic proteins as well as ALP, osteonectin, osteocalcin, collagen type I (Col-I) and Runx2 as osteogenic genes via immunocytochemistry (ICC) and Real-time PCR analyses. The obtained data showed the higher ALP enzyme activity and biomineralization, more intensity during von Kossa staining as well as the increase in the expression rate of osteogenic related gene and protein markers in differentiated hMSCs on PLLA-DH. In conclusion, the present study revealed that the combination of PLLA scaffold with DH provides a scope to develop a suitable matrix in bone tissue engineering applications.     

以胶原膜为支架的心肌细胞体外三维培养

将从新生乳鼠心室肌组织获取的心肌细胞接种于鼠尾胶原膜三维支架和组织培养板,以细胞形态、细胞搏动、葡萄糖比消耗率(q_glu)、乳酸比产率(q_lac)、乳酸转化率(Y_lac/glu)、肌酸激酶及乳酸脱氢酶的活力为观察指标,比较心肌细胞在鼠尾胶原膜中三维(3D)培养和组织培养板中二维(2D)培养的差异。培养于鼠尾胶原膜的乳鼠心肌细胞在第5天形成闰盘连接,形成面积约为80mm³、肉眼可见自律性同步收缩的心肌细胞3D培养物。3D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.37 μmol/10.6cells/d、2.92 μmol/106cells/d和0.38 μmol/μmol;2D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.59 μmol/10.6cells/d、3.83 μmol/10.6cells/d和 0.51 μmol/μmol。两种培养体系中乳鼠心肌细胞的肌酸激酶及乳酸脱氢酶的活力无明显差别。实验结果表明：培养于鼠尾胶原膜的心肌细胞保持正常心肌细胞的代谢活力和收缩功能。     

Osteogenic differentiation of miniature pig mesenchymal stem cells in 2D and 3D environment

Mesenchymal stem cells (MSCs) have been repeatedly shown to be able to repair bone defects. The aim of this study was to characterize the osteogenic differentiation of miniature pig MSCs and markers of this differentiation in vitro. Flow-cytometrically characterized MSCs were seeded on cultivation plastic (collagen I and vitronectin coated/uncoated) or plasma clot (PC)/plasma-alginate clot (PAC) scaffolds and differentiated in osteogenic medium. During three weeks of differentiation, the formation of nodules and deposition of calcium were visualized by Alizarin Red Staining. In addition, the production of alkaline phosphatase (ALP) activity was quantitatively detected by fluorescence. The expression of osteopontin, osteonectin and osteocalcin were assayed by immunohistochemistry and Western Blot analysis. We revealed a decrease of osteopontin expression in 2D and 3D environment during differentiation. The weak initial osteonectin signal, culminating on 7(th) or 14(th) day of differentiation, depends on collagen I and vitronectin coating in 2D system. The highest activity of ALP was detected on 21(th) day of osteogenic differentiation. The PC scaffolds provided better conditions for osteogenic differentiation of MSCs than PAC scaffolds in vitro. We also observed expected effects of collagen I and vitronectin on the acceleration of osteogenic differentiation of miniature pig MSC. Our results indicate similar ability of miniature pig MSCs osteogenic differentiation in 2D and 3D environment, but the expression of osteogenic markers in scaffolds and ECM coated monolayers started earlier than in the monolayers without ECM.     

Osteogenic differentiation and osteochondral tissue engineering using human adipose‐derived stem cells

Osteogenesis and the production of composite osteochondral tissues were investigated using human adult adipose‐derived stem cells and polyglycolic acid (PGA) mesh scaffolds under dynamic culture conditions. For osteogenesis, cells were expanded with or without osteoinduction factors and cultured in control or osteogenic medium for 2 weeks. Osteogenic medium enhanced osteopontin and osteocalcin gene expression when applied after but not during cell expansion. Osteogenesis was induced and mineralized deposits were present in tissues produced using PGA culture in osteogenic medium. For development of osteochondral constructs, scaffolds seeded with stem cells were precultured in either chondrogenic or osteogenic medium, sutured together, and cultured in dual‐chamber stirred bioreactors containing chondrogenic and osteogenic media in separate compartments. After 2 weeks, total collagen synthesis was 2.1‐fold greater in the chondroinduced sections of the composite tissues compared with the osteoinduced sections; differentiation markers for cartilage and bone were produced in both sections of the constructs. The results from the dual‐chamber bioreactor highlight the challenges associated with achieving simultaneous chondrogenic and osteogenic differentiation in tissue engineering applications using a single stem‐cell source. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2013     

Enhanced Healing of Rat Calvarial Defects with MSCs Loaded on BMP-2 Releasing Chitosan/Alginate/Hydroxyapatite Scaffolds

In this study, we designed a chitosan/alginate/hydroxyapatite scaffold as a carrier for recombinant BMP-2 (CAH/B2), and evaluated the release kinetics of BMP-2. We evaluated the effect of the CAH/B2 scaffold on the viability and differentiation of bone marrow mesenchymal stem cells (MSCs) by scanning electron microscopy, MTS, ALP assay, alizarin-red staining and qRT-PCR. Moreover, MSCs were seeded on scaffolds and used in a 8 mm rat calvarial defect model. New bone formation was assessed by radiology, hematoxylin and eosin staining 12 weeks postoperatively. We found the release kinetics of BMP-2 from the CAH/B2 scaffold were delayed compared with those from collagen gel, which is widely used for BMP-2 delivery. The BMP-2 released from the scaffold increased MSC differentiation and did not show any cytotoxicity. MSCs exhibited greater ALP activity as well as stronger calcium mineral deposition, and the bone-related markers Col1α, osteopontin, and osteocalcin were upregulated. Analysis of in vivo bone formation showed that the CAH/B2 scaffold induced more bone formation than other groups. This study demonstrates that CAH/B2 scaffolds might be useful for delivering osteogenic BMP-2 protein and present a promising bone regeneration strategy.     

Hepatocyte behavior within three-dimensional porous alginate scaffolds

A potential approach to facilitate the performance of implanted hepatocytes is to enable their aggregation and re-expression of their differentiated function prior to implantation. Here we examined the behavior of freshly isolated rat adult hepatocytes seeded within a novel three-dimensional (3-D) scaffold based on alginate. The attractive features of this scaffold include a highly porous structure (sponge-like) with interconnecting pores, and pore sizes with diameters of 100-150 microm. Due to their hydrophilic nature, seeding hepatocytes onto the alginate sponges was efficient. DNA measurements showed that the total cell number within the sponges did not change over 2 weeks, indicating that hepatocytes do not proliferate under these culture conditions. Nearly all seeded cells maintained viability, according to the MTT assay. Within 24 h post-seeding, small clusters of viable cells, were seen scattered within the sponge. More than 90% of the seeded cells participated in the aggregation; the high efficiency is attributed to the non-adherent nature of alginate. The spheroids had smooth boundaries and by day 4 in culture reached an average diameter of 100 microm, which is at the same magnitude of the sponge pore size. The cells appeared to synthesize fibronectin which was deposited on the spheroids. No laminin or collagen type IV were detected in the deposit. The 3-D arrangement of hepatocytes within the alginate sponges promoted their functional expression; within a week the cells secreted the maximal albumin secretion rate of 60 microg albumin/10(6) cells/day. Urea secretion rate did not depend on cell aggregation and was similar to that obtained when hepatocytes were cultured on collagen type I coated dishes (100 microg/10(6) cells/day). Our studies show that alginate sponges can provide a conducive environment to facilitate the performance of cultured hepatocytes by enhancing their aggregation.     

牙源性干细胞复合微渠多孔羟基磷灰石支架成骨性能研究*

目的: 探讨牙源性干细胞复合微渠多孔羟基磷灰石支架(grooved porous hydroxyapatite scaffolds, HAG支架)的成骨性能,为骨缺损修复治疗提供新手段。方法: 从健康成人第三磨牙中提取牙周膜干细胞(periodontal ligament stem cells, PDLSCs)及牙髓干细胞(dental pulp stem cells, DPSCs)分别接种于HAG支架上,进行多向分化鉴定及碱性磷酸酶(alkaline phosphatase,ALP)活性测定;并通过CCK-8检测细胞增殖能力;逆转录聚合酶链反应(qRT-PCR)检测骨形态发生蛋白2(bone morphogenetic protein 2, BMP-2)、骨钙素(osteocalcin, OCN)和骨桥蛋白(osteopontin, OPN)等成骨相关基因的表达。体内研究中将搭载PDLSCs和DPSCs的HAG支架移植到裸鼠的背部皮下,8周后取材,组织切片后采用苏木精-伊红(HE)染色观察新骨形成,提取组织蛋白采用Western blot检测ALP、OCN等成骨相关蛋白的表达。结果: 体外研究中DPSCs复合HAG支架组的细胞增殖能力、ALP活性,以及成骨相关基因ALP、BMP2、OCN等的表达均高于PDLSCs复合HAG支架组。体内研究中HE染色显示,PDLSCs复合HAG支架组及DPSCs复合HAG支架组均较空白HAG支架组有更多细胞生长区、纤维细胞增生及骨基质形成,且DPSCs复合HAG支架组的骨基质面积更大,成纤维细胞数量更多;PDLSCs复合HAG支架组及DPSCs复合HAG支架组成骨相关蛋白的表达量均高于空白HAG组,且DPSCs复合HAG支架组中ALP蛋白表达量显著高于PDLSCs复合HAG支架组。结论: PDLSCs、DPSCs复合HAG支架在体内外均表现出良好的成骨性能,其中DPSCs复合HAG支架的成骨性能更为优异。     

Simvastatin coating of TiO2 scaffold induces osteogenic differentiation of human adipose tissue-derived mesenchymal stem cells

Bone tissue engineering requires an osteoconductive scaffold, multipotent cells with regenerative capacity and bioactive molecules. In this study we investigated the osteogenic differentiation of human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) on titanium dioxide (TiO₂) scaffold coated with alginate hydrogel containing various concentrations of simvastatin (SIM). The mRNA expression of osteoblast-related genes such as collagen type I alpha 1 (COL1A1), alkaline phosphatase (ALPL), osteopontin (SPP1), osteocalcin (BGLAP) and vascular endothelial growth factor A (VEGFA) was enhanced in hAD-MSCs cultured on scaffolds with SIM in comparison to scaffolds without SIM. Furthermore, the secretion of osteoprotegerin (OPG), vascular endothelial growth factor A (VEGFA), osteopontin (OPN) and osteocalcin (OC) to the cell culture medium was higher from hAD-MSCs cultured on scaffolds with SIM compared to scaffolds without SIM. The TiO₂ scaffold coated with alginate hydrogel containing SIM promote osteogenic differentiation of hAD-MSCs in vitro, and demonstrate feasibility as scaffold for hAD-MSC based bone tissue engineering.     

雪旺氏细胞与同种异体骨支架的体外共培养研究

目的:探讨雪旺细胞(Schwann’s cells,SCs)在同种异体骨支架上的生物相容性,体外构建组织工程骨神经化模型。方法:利用新鲜人体骨骼制备同种异体骨支架材料,检测其物理性能;采用优化方法提取新生SD大鼠坐骨、臂丛神经培养SCs,实验分为三维培养实验组(SCs+同种异体骨)、二维培养对照组(SCs+胶原玻片),S-100抗体免疫荧光染色鉴定SCs纯度;细胞计数法检测两组细胞增殖特点;细胞接种后第3、7天取样,扫描电镜观察。结果:同种异体骨支架具有良好的三维孔隙结构,适宜细胞贴附生长;S-100免疫荧光染色证实SCs纯度95%;扫描电镜检测显示两组SCs均可正常粘附增殖,细胞间排布规律相似,培养早期实验组SCs胞体更加细长,伪足更加明显,随着培养时间的延长表现出较强的迁移能力;细胞增殖检测:两组SCs生长曲线特征基本一致,支架材料对SCs无毒性作用。结论:同种异体骨支架SCs具有良好的生物相容性,其三维立体多孔结构有利于SCs的粘附与迁移,初步构建了体外组织工程骨神经化模型。     

Osteogenic differentiation is inhibited and angiogenic expression is enhanced in MC3T3-E1 cells cultured on three-dimensional scaffolds

Osteogenic differentiation of osteoprogenitor cells in three-dimensional (3D) in vitro culture remains poorly understood. Using quantitative real-time RT-PCR techniques, we examined mRNA expression of alkaline phosphatase, osteocalcin, and vascular endothelial growth factor (VEGF) in murine preosteoblastic MC3T3-E1 cells cultured for 48 h and 14 days on conventional two-dimensional (2D) poly(L-lactide-co-glycolide) (PLGA) films and 3D PLGA scaffolds. Differences in VEGF secretion and function between 2D and 3D culture systems were examined using Western blots and an in vitro Matrigel-based angiogenesis assay. Expression of both alkaline phosphatase and osteocalcin in cells cultured on 3D scaffolds was significantly downregulated relative to 2D controls in 48 h and 14 day cultures. In contrast, elevated levels of VEGF expression in 3D culture were noted at every time point in short- and long-term culture. VEGF protein secretion in 3D cultures was triple the amount of secretion observed in 2D controls. Conditioned medium from 3D cultures induced an enhanced level of angiogenic activity, as evidenced by increases in branch points observed in in vitro angiogenesis assays. These results collectively indicate that MC3T3-E1 cells commit to osteogenic differentiation at a slower rate when cultured on 3D PLGA scaffolds and that VEGF is preferentially expressed by these cells when they are cultured in three dimensions. gene expression; osteogenesis; angiogenesis     

Dynamic compression promotes proliferation and neovascular networks of endothelial progenitor cells in demineralized bone matrix scaffold seed

Neovascularization is required for bone formation and successful fracture healing. In the process of neovascularization, endothelial progenitor cells (EPCs) play an important role and finish vascular repair through reendothelialization to promote successful fracture healing. In this study, we found that dynamic compression can promote the proliferation and capillary-like tube formation of EPCs in the demineralized bone matrix (DBM) scaffold seed. EPCs isolated from the bone marrow of rats have been cultured in DBM scaffolds before dynamic compression and then seeded in the DBM scaffolds under dynamic conditions. The cells/scaffold constructs were subjected to cyclic compression with 5% strain and at 1 Hz for 4 h/day for 7 consecutive days. By using MTT and real-time PCR, we found that dynamic compression can significantly induce the proliferation of EPCs in three-dimensional culture with an even distribution of cells onto DBM scaffolds. Both in vitro and in vivo, the tube formation assays in the scaffolds showed that the loaded EPCs formed significant tube-like structures. These findings suggest that dynamic compression promoted the vasculogenic activities of EPCs seeded in the scaffolds, which would benefit large bone defect tissue engineering.     

Dedifferentiated fat cells differentiate into osteoblasts in titanium fiber mesh

Mature adipocyte-derived dedifferentiated fat (DFAT) cells rapidly differentiate into osteoblasts under three-dimensional culture conditions. However, it has not been demonstrated that DFAT cells can differentiate into osteoblasts in a rigid scaffold consisting of titanium fiber mesh (TFM). We examined the proliferation and osteogenic differentiation ability of DFAT cells using TFM as a scaffold. DFAT cells derived from rabbit subcutaneous fat were seeded into TFM and cultured in osteogenic medium containing dexamethasone, l-ascorbic acid 2-phosphate and β-glycerophosphate for 14 days. In scanning electron microscopy (SEM) analysis, well-spread cells covered the titanium fibers on day 3, and appeared to increase in number from day 3 to 7. Numerous globular accretions were found and almost completely covered the fibers on day 14. Cell proliferation, as measured by DNA content in the TFM, was significantly higher on day 7 compared with that of day 1. Osteocalcin and calcium content in the TFM were significantly higher on day 14 compared to those of days 1, 3, and 7, indicating DFAT cells differentiated into osteoblasts. We theorize that globular accretions observed in SEM analysis may be calcified matrix resulting from osteocalcin secreted by osteoblasts binding calcium contained in fetal bovine serum. In this study, we demonstrated that DFAT cells differentiate into osteoblasts and deposit mineralized matrices in TFM. Therefore, the combination of DFAT cells and TFM may be an attractive option for bone tissue engineering.