Responsive behavior of tumor-marker-imprinted hydrogels using macromolecular cross-linkers

Tumor-marker-imprinted hydrogels having lectin and antibody molecules as ligands for a tumor-specific marker glycoprotein were strategically prepared by biomolecular imprinting using minute amounts of low-molecular-weight or high-molecular-weight cross-linkers. The tumor-marker-imprinted hydrogels shrank gradually in response to a target glycoprotein, because their apparent cross-linking density increased owing to simultaneous complex formation of lectin and antibody ligands with a target glycoprotein after their ligands dynamically recognized the glycoprotein. The swelling ratio of the tumor-marker-imprinted hydrogel using high-molecular-weight cross-linker with an optimal chain length decreased more drastically than that using a low-molecular-weight cross-linker, but the hydrogel using the cross-linker with a chain that was too long did not exhibit tumor-marker responsive behavior. This paper focuses on the effect of the molecular weight of cross-linkers on the responsive behavior of tumor-marker-imprinted hydrogels having lectin and antibody molecules as ligands. The cross-linker chain length was an important factor in determining the dynamic glycoprotein recognition and responsive behavior of the biomolecule-imprinted hydrogels.     

Synthesis and characterization of injectable poly(N-isopropylacrylamide-co-acrylic acid) hydrogels with proteolytically degradable cross-links

Hydrogels composed of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) were prepared by redox polymerization with peptide cross-linkers to create an artificial extracellular matrix (ECM) amenable for testing hypotheses regarding cell proliferation and migration in three dimensions. Peptide degradable cross-linkers were synthesized by the acrylation of the amine groups of glutamine and lysine residues within peptide sequences potentially cleavable by matrix metalloproteinases synthesized by mammalian cells (e.g., osteoblasts). With the peptide cross-linker, loosely cross-linked poly(N-isopropylacrylamide-co-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content, and enzymatic degradation properties were investigated. The peptide-cross-linked P(NIPAAm-co-AAc) hydrogels were pliable and fluidlike at room temperature and could be injected through a small-diameter aperture. The LCST of peptide-cross-linked hydrogel was influenced by the monomer ratio of NIPAAm/AAc but not by cross-linking density within the polymer network. A peptide-cross-linked hydrogel with a 97/3 molar ratio of NIPAAm/AAc exhibited a LCST of approximately 34.5 degrees C. Swelling was influenced by NIPAAm/AAc monomer ratio, cross-linking density, and swelling media; however, all hydrogels maintained more than 90% water even at 37 degrees C. In enzymatic degradation studies, breakdown of the peptide-cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on both the concentration of collagenase and the cross-linking density. These results suggest that peptide-cross-linked P(NIPAAm-co-AAc) hydrogels can be tailored to create environmentally-responsive artificial extracellular matrixes that are degraded by proteases.     

Rapidly in situ-forming degradable hydrogels from dextran thiols through Michael addition

Thiol-functionalized dextrans (dex-SH) (M(n,dextran) = 14K or 31K) with degrees of substitution (DS) ranging from 12 to 25 were synthesized and investigated for in situ hydrogel formation via Michael type addition using poly(ethylene glycol) tetra-acrylate (PEG-4-Acr) or a dextran vinyl sulfone conjugate with DS 10 (dex-VS DS 10). Dex-SH was prepared by activation of the hydroxyl groups of dextran with 4-nitrophenyl chloroformate and subsequent reaction with cysteamine. Hydrogels were rapidly formed in situ under physiological conditions upon mixing aqueous solutions of dex-SH and either PEG-4-Acr or dex-VS DS 10 at polymer concentrations of 10 to 20 w/v%. Rheological studies showed that these hydrogels are highly elastic. By varying the DS, concentration, dextran molecular weight, and type of cross-linker, hydrogels with a broad range of storage moduli of 9 to 100 kPa could be obtained. Varying the ratio of thiol to vinyl sulfone groups from 0.9 to 1.1 did not alter the storage modulus of the hydrogels, whereas larger deviations from equimolarity (thiol to vinyl sulfone ratios of 0.75 and 1.5) considerably decreased the storage modulus. The plateau value of hydrogel storage modulus was reached much faster at pH 7.4 compared to pH 7, due to a higher concentration of the thiolate anion at higher pH. These hydrogels were degradable under physiological conditions. Degradation times were 3 to 7 weeks for dex-SH/dex-VS DS 10 hydrogels and 7 to over 21 weeks for dex-SH/PEG-4-Acr hydrogels, depending on the DS, concentration, and dextran molecular weight.     

Molecular simulation study of the effect of cross-linker on the properties of poly(N-isopropyl acrylamide) hydrogel

Molecular simulation techniques have been utilised to investigate the effect of cross-linker type on the structural and dynamical properties of a temperature-sensitive hydrogel, poly (N-isopropyl acrylamide) (PNIPAM) across its lower critical solution temperature (LCST). PNIPAM exhibits an LCST at ～305 K, above which it collapses and below which it is swollen. Molecular dynamics simulations of PNIPAM hydrogel cross-linked with N, N′-methylene bisacrylamide (BIS) and ethylene glycol dimethacrylate (EGD) cross-linkers were carried out below, at and above its LCST (namely 300, 305 and 310 K, respectively). Structural analysis indicates that the cross-linkers did not affect the temperature of the onset of the LCST, but did affect the degree of swelling and pore size distribution, where the EGD-cross-linked hydrogel exhibited a greater degree of structural change than that of the BIS-cross-linked hydrogel. We believe that this could be attributed to the longer chain length and more flexible nature of the EGD cross-linker compared to the BIS cross-linkers.     

Characterization of photo-cross-linked oligo[poly(ethylene glycol) fumarate] hydrogels for cartilage tissue engineering

Photo-cross-linkable oligo[poly(ethylene glycol) fumarate] (OPF) hydrogels have been developed for use in tissue engineering applications. We demonstrated that compressive modulus of these hydrogels increased with increasing polymer concentration, and hydrogels with different mechanical properties were formed by altering the ratio of cross-linker/polymer in precursor solution. Conversely, swelling of hydrogels decreased with increasing polymer concentration and cross-linker/polymer ratio. These hydrogels are degradable and degradation rates vary with the change in cross-linking level. Chondrocyte attachment was quantified as a method for evaluating adhesion of cells to the hydrogels. These data revealed that cross-linking density affects cell behavior on the hydrogel surfaces. Cell attachment was greater on the samples with increased cross-linking density. Chondrocytes on these samples exhibited spread morphology with distinct actin stress fibers, whereas they maintained their rounded morphology on the samples with lower cross-linking density. Moreover, chondrocytes were photoencapsulated within various hydrogel networks. Our results revealed that cells encapsulated within 2-mm thick OPF hydrogel disks remained viable throughout the 3-week culture period, with no difference in viability across the thickness of hydrogels. Photoencapsulated chondrocytes expressed the mRNA of type II collagen and produced cartilaginous matrix within the hydrogel constructs after three weeks. These findings suggest that photo-cross-linkable OPF hydrogels may be useful for cartilage tissue engineering and cell delivery applications.     

Cross-linking and degradation of step-growth hydrogels formed by thiol-ene photoclick chemistry

Thiol-ene photoclick hydrogels have been used for a variety of tissue engineering and controlled release applications. In this step-growth photopolymerization scheme, four-arm poly(ethylene glycol) norbornene (PEG4NB) was cross-linked with dithiol containing cross-linkers to form chemically cross-linked hydrogels. While the mechanism of thiol-ene gelation was well described in the literature, its network ideality and degradation behaviors are not well-characterized. Here, we compared the network cross-linking of thiol-ene hydrogels to Michael-type addition hydrogels and found thiol-ene hydrogels formed with faster gel points and higher degree of cross-linking. However, thiol-ene hydrogels still contained significant network nonideality, demonstrated by a high dependency of hydrogel swelling on macromer contents. In addition, the presence of ester bonds within the PEG-norbornene macromer rendered thiol-ene hydrogels hydrolytically degradable. Through validating model predictions with experimental results, we found that the hydrolytic degradation of thiol-ene hydrogels was not only governed by ester bond hydrolysis, but also affected by the degree of network cross-linking. In an attempt to manipulate network cross-linking and degradation of thiol-ene hydrogels, we incorporated peptide cross-linkers with different sequences and characterized the hydrolytic degradation of these PEG-peptide hydrogels. In addition, we incorporated a chymotrypsin-sensitive peptide as part of the cross-linkers to tune the mode of gel degradation from bulk degradation to surface erosion.     

Protein release from galactoglucomannan hydrogels: influence of substitutions and enzymatic hydrolysis by beta-mannanase

O-Acetyl-galactoglucomannan (AcGGM) is the major soft-wood hemicellulose. Structurally modified AcGGM and hydrogels of AcGGM were prepared. The degree of substitution (DS) of AcGGM was modified enzymatically with alpha-galactosidase, and chemically with an acrylate derivative, 2-hydroxyethylmethacrylate (HEMA). The hydrolysis of AcGGM with beta-mannanase was shown to increase with decreasing DS. AcGGM hydrogels were prepared from chemically modified AcGGM with varying DS of HEMA. Bovine serum albumin (BSA) was encapsulated in hydrogels. A spontaneous burst release of BSA was decreased with increased DS of HEMA. The addition of beta-mannanase significantly enhanced the BSA release from hydrogels with a DS of 0.36, reaching a maximum of 95% released BSA after eight hours compared to 60% without enzyme. Thus, both the pendant group composition and the enzyme action are valuable tools in the tailoring of hydrogel release profiles of potential interest for intestine drug delivery.     

Bio-based hydrogels prepared by cross-linking of microbial poly(gamma-glutamic acid) with various saccharides

Novel bio-based hydrogels were prepared by cross-linking of microbial poly(gamma-glutamic acid) (PGA) with saccharides such as glucose, maltotriose, and cyclodextrin (CD) in the presence of water-soluble carbodiimide in dimethyl sulfoxide (DMSO) by one-pot synthesis at 25 degrees C for 24 h. The degradation of the gels in alkaline solution (pH 9) at 37 degrees C was also investigated. The PGA gels cross-linked with various neutral saccharides were obtained in relatively high recovery yields by use of a base like 4,4-(dimethylamino)pyridine. The PGA gel cross-linked by glucose showed the highest water absorption of 3000 g/g. The PGA gels cross-linked by CDs showed higher water absorption than those cross-linked by the corresponding linear saccharides. It was revealed that the water absorption of the PGA gel was affected by the cross-linker content and also the structure of cross-linkers as they had an effect on the cross-linking density of the PGA gel. The PGA gels were hydrolyzed under alkaline condition (pH 9) at 37 degrees C. The degradation rate was higher when the cross-linker content of the gel was lower.     

Development of a temperature-sensitive composite hydrogel for drug delivery applications

To develop materials with improved controllability and specificity, we have investigated composite hydrogels with temperature-sensitive properties using photo cross-linking. Specifically, our novel composite materials are composed of nanoparticles made of poly(N-isopropylacrylamide) (PNIPAAm), temperature-sensitive hydrogels, and a photo cross-linker, poly(ethylene glycol) diacrylate (PEGDA). PNIPAAm particles were synthesized by emulsion polymerization and by varying concentration of four main factors: monomers (N-isopropylacrylamide), cross-linkers (N,N'-methylenebisacrylamide), surfactants (sodium dodecyl sulfate, SDS), and initiators (potassium persulfate). We found that the surfactant, SDS, was the most important factor affecting the particle size using the factorial design analysis. Additionally, both nano- and micro-PNIPAAm particles had excellent loading efficiency (>80% of the incubated bovine serum albumin (BSA)), and their release kinetics expressed an initial burst effect followed by a sustained release over time. Furthermore, BSA-loaded PNIPAAm nanoparticles were used to form three-dimensional gel networks by means of a photocuring process using a photo cross-linker, PEGDA, and a photoinitiator, Irgacure-2959 (I-2959). Results from scanning electron microscopy and in vitro BSA release studies from these hydrogels demonstrated that PNIPAAm nanoparticles were embedded inside the PEG polymeric matrix and the composite material was able to release BSA in response to changes in temperature. These PNIPAAm nanoparticle hydrogel networks may have advantages in applications of controlled drug delivery systems because of their temperature sensitivity and their ability of in situ photopolymerization to localize at the specific region in the body.     

Synthesis and characterization of thermosensitive graft copolymer of N-isopropylacrylamide with biodegradable carboxymethylchitosan

A novel thermosensitive and hydrogel was designed and synthesized by graft copolymerization of N-isopropylacrylamide (NIPAAm) with biodegradable carboxymethylchitosan (CMCS). The influence of the content of CMCS grafted on the properties of the resulted hydrogels was examined. The morphology of the hydrogels was observed by scanning electron microscopy (SEM), their thermal property was characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and deswelling/swelling kinetics upon external temperature changes. In comparison with the conventional PNIPAAm hydrogels, the resulted hydrogels have improved thermosensitive properties, including enlarged water content at room temperature and faster deswelling/swelling rate upon heating. The strategy described here presents a potential alternative to the traditional synthesis techniques for thermosensitive hydrogels.     

Biochemical characterization of a novel beta-1--3, 1--4 glucan 4-glucanohydrolase from Thermomonospora sp. having a single active site for lichenan and xylan

A bifunctional high molecular weight (Mr, 64,500 Da) beta-1-3, 1-4 glucan 4-glucanohydrolase was purified to homogeneity from Thermomonospora sp., exhibiting activity towards lichenan and xylan. A kinetic method was used to analyze the active site that hydrolyzes lichenan and xylan. The experimental data was in agreement with the theoretical values calculated for a single active site. Probing the conformation and microenvironment at active site of the enzyme by fluorescent chemo-affinity label, OPTA resulted in the formation of an isoindole derivative with complete inactivation of the enzyme to hydrolyse both lichenan and xylan confirmed the results of kinetic method. OPTA forms an isoindole derivative by cross-linking the proximal thiol and amino groups. The modification of cysteine and lysine residues by DTNB and TNBS respectively abolished the ability of the enzyme to form an isoindole derivative with OPTA, indicating the participation of cysteine and lysine in the formation of isoindole complex.     

Synthesis and characterization of quaternized β-chitin

Water-soluble 2′-O-hydroxypropyltrimethylammoniumchitin chloride (2′-O-HTACCt) was prepared directly from β-chitin and 3-chloro-2-hydroxypropyltrimethylammonium chloride (CTA) in basic medium. The effect of alkali concentration, reaction temperature, reaction time, and dosage of CTA on yield and degree of substitution (DS) of 2′-O-HTACCt were studied. These quaternized chitin derivatives were characterized by FTIR and ¹H NMR spectroscopy, conductometric titration, and elemental analysis methods. Research results indicate that β-chitin can react directly with CTA to produce a water-soluble 2′-O-HTACCt derivative with a high DS. The optimal preparation conditions were determined to be 35-40 wt % (aq NaOH), 40 °C (reaction temperature), 6 h (reaction time), and 4 (molar ratio of CTA to β-chitin unit).     

Asialo-α1-acid glycoprotein resialylated with 9-amino-5-N-acetyl-d-neuraminic acid is resistant towards bacterial,viral and mammalian sialidases

We demonstrate that 9-amino-NeuAc transferred to asialo-₁-acid glycoprotein resists cleavage by bacterial, viral and mammalian sialidases. This is the first synthetic sialic acid analogue, which can be activated and transferred to glycoprotein, but is not a sialidase (EC 3.2.1.18) substrate.Abbreviations HPLC high performance liquid chromatography - BSA bovine serum albumin - NeuAc N-acetyl-d-neuraminic acid, 5-acetamido-3,5-dideoxy-d-glycero-d-galacto-non-2-ulosonic acid - 9-Amino-NeuAc 9-amino-5-N-acetyl-d-neuraminic acid, 5-acetamido-9-trideoxy-d-glycero-d-galacto-non-2-ulosonic acid - CMP-NeuAc cytidine-5-monophospho-N-acetyl-d-neuraminic acid - CMP-9-amino-NeuAc cytidine-5-monophospho-9-amino-5-N-acetyl-d-neuraminic acid - 9-azido-NeuAc 5-acetamido-9-azido-3,5,9-trideoxy-d-glycero-d-galacto-non-2-ulosonic acid. Enzymes EC 3.2.1.18 sialidase, acylneuraminylhydrolase - EC 2.4.99.1 Galß1-4GlcNAc a(2-6)-sialytransferase     

Synthesis ofNeoglycoproteins containing the 3,6-di-O-methyl-β-d-glucopyranosyl epitope and their use in serodiagnosis of leprosy

A stratagem for the synthesis ofneoglycoproteins suitable for the selective serodiagnosis of leprosy is described in which synthetic 3,6-di-O-methyl--d-glucopyranose, the epitope of phenolic glycolipid I fromMycobacterium leprae, was used. Condensation of 8-methoxycarbonyloctanol with the acetobromo derivative of 3,6-di-O-methylglucose gave 8-methoxycarbonyloctyl 2,4-di-O-acetyl-3,6-di-O-methyl--d-glucopyranoside in 65% yield, and with absolute stereospecificity for the anomer. The deacylated product was converted to the crystalline hydrazide and coupled to bovine gamma globulin, bovine serum albumin and poly-d-lysinevia intermediate acyl azide formation to produce the 8-carbonyloctyl 3,6-di-O-methyl--d-glucopyranosyl polypeptides. Theneoglycoproteins were highly sensitive in ELISA and emulated the specificity of the native glycolipid in analysis of sera from patients throughout the spectrum of leprosy and from different geographical regions. The 8-carbonyloctyl 3,6-di-O-methyl--d-glucopyranoside-bovine serum albumin was also synthesized and shown to have about one-half the activity of the -linkedneoglycoprotein. A different synthetic approach produced the 8-carbonyloctyl 4-O-(3,6-di-O-methyl--d-glucopyranosyl)--l-rhamnopyranoside-bovine serum albumin which was also highly sensitive and specific for the serodiagnosis of leprosy. The presence of the second sugar unit, similar to that in the native glycolipid but for the absence ofO-methyl groups, seemed to provide a probe with greater felicity for the serological detection of tuberculoid leprosy.Thus, the results indicate that highly sensitive and specific antigen probes for the serodiagnosis of leprosy can be constructed based only on the terminal one or two sugars of phenolic glycolipid I, and the synthetic approach leads to the formation of haptens with absolute stereospecificity.Nomenclature BGG bovine gamma globulin - PGL-I phenolic glycolipid I - PDL poly-d-lysine - PBS phophate-buffered saline - 3,6-Me₂-Glc-Link-BSA 8-carbonyloctyl 3,6-di-O-methyl-glucopyranoside-bovine senalbumin - 3,6-Me₂-Glc-Rha-Link-BSA 8-carbonyloctyl 4-O-(3,6-di-O-methyl--d-glucopyranosyl)--l-rhan pyranoside-BSA     

Modulate the phase transition temperature of hydrogels with both thermosensitivity and biodegradability

The synthesis and characterization of thermoresponsive hydrogels on the basis of N-isoproplyarylamide (NIPAAm) and acrylamide (AAm) copolymers crosslinked with a novel biodegradable crosslinker (PEG-co-PLA) were carried out in this study. Swelling measurement results demonstrated that four gels of PNAM5, PNAM10, PNAM12 and PNAM15 are thermoresponsive. The equilibrium swelling ratio and degradation of the hydrogels strongly depend on hydrogels composition. The morphology of the hydrogels was observed by scanning electron microscopy (SEM), and their thermal property was characterized by differential scanning calorimetry (DSC). The results show that the proportion of AAm in the copolymer has notable effect on the low critical solution temperature (LCST) of the hydrogel. When the molar ratio of AAm to NIPAAm was increased from 1:10 to 3:10 the LCST of the copolymer increased from 39.7 to 64.2 °C. The compression modulus of PNAM15 is of the highest among other hydrogels, because PNAM15 hydrogel has a more compact structure.     

Biocomposite hydrogels with carboxymethylated, nanofibrillated cellulose powder for replacement of the nucleus pulposus

Biocomposite hydrogels with carboxymethylated, nanofibrillated cellulose (c-NFC) powder were prepared by UV polymerization of N-vinyl-2-pyrrolidone with Tween 20 trimethacrylate as a cross-linking agent for replacement of the native, human nucleus pulposus (NP) in intervertebral disks. The swelling ratios and the moduli of elasticity in compression of neat and biocomposite hydrogels were evaluated in dependence of c-NFC concentration (ranging from 0 to 1.6% v/v) and degree of substitution (DS, ranging from 0 to 0.23). The viscoelastic properties in shear and the material relaxation behavior in compression were measured for neat and biocomposite hydrogels containing 0.4% v/v of fibrils (DS ranging from 0 to 0.23), and their morphologies were characterized by cryo-scanning electron microscopy (cryo-SEM). The obtained results show that the biocomposite hydrogels can successfully mimic the mechanical and swelling behavior of the NP. In addition, the presence of the c-NFC shows lower strain values after cyclic compression tests and consequently creates improved material relaxation properties compared with neat hydrogels. Among the tested samples, the biocomposite hydrogel containing 0.4% v/v of c-NFC with a DS of 0.17 shows the closest behavior to native NP. Further investigation should focus on evaluation and improvement of the long-term relaxation behavior.     

Green synthesis of xylan hemicellulose esters

The esterification of xylan type hemicelluloses, isolated from birchwood, was carried out firstly in homogeneous conditions using N,N-dimethylformamide (DMF) and lithium chloride (LiCl) in the presence of 4-dimethylaminipyridine (DMAP). The degree of substitution (DS) of xylan acetates ranged between 0.9 and 2.0 as a function of experimental conditions. Due to the problems of toxicity and recycling of DMF, an alternative method of esterification is reported in the second part of this work, performing in the absence of organic solvent and using DMAP or methanesulfonic acid (MSA) as catalysts. Acetylation reaction catalyzed by MSA was developed through an experimental design in order to achieve the highest DS under the mildest conditions. The significant factors and their interactions were identified. The optimization of reaction parameters allowed to obtain a high DS (1.6) and maximal yield (85%). Moreover, the reactivity of propionic and hexanoic anhydrides was evaluated and hydrophobic xylan esters with low degrees of substitution were obtained.     

Design of hybrid hydrogels with self-assembled nanogels as cross-linkers: interaction with proteins and chaperone-like activity

New hybrid hydrogels with nanogel domains were obtained by using polymerizable self-assembled nanogels as cross-linkers. Methacryloyl groups were introduced to cholesteryl group-bearing pullulan (CHP). The methacryloyl group-bearing CHPs (CHPMAs) formed nanogels by their self-association in water (R(g) = 14-17 nm). CHPMA nanogels were polymerized with 2-methacryloyloxyethyl phosphorylcholine (MPC) by radical polymerization in a semidilute aqueous solution. CHPMA nanogels acted as effective cross-linkers for gelation. TEM observation showed that the nanogel structure was retained after gelation and that the nanogels were well dispersed in the macrogel. The hybrid hydrogels showed two well-defined networks such as a nanogel intranetwork structure of less than 10 nm (physically cross-linking) and an internetwork structure of several hundred nanometers (chemically cross-linking). The immobilized nanogels retained their ability to trap and release protein (insulin was used as a model protein) by host-guest interaction of the cholesteryl group and cyclodextrin and also showed high chaperone-like activity for refolding of chemically denatured protein.     

Evaluation of the in vitro degradation of macroporous hydrogels using gravimetry,confined compression testing,and microcomputed tomography

This study investigated the in vitro degradation characteristics of macroporous hydrogels based on poly(propylene fumarate-co-ethylene glycol) (P(PF-co-EG)). Four formulations were fabricated to test the effect of porosity and cross-linking density on the degradation of the resulting macroporous hydrogels. Macroporosity was introduced by the addition of sodium bicarbonate and ascorbic acid, the precursors of the carbon dioxide porogen, in the initiation system for the hydrogel cross-linking. Macroporous hydrogels with porosities of 0.80 +/- 0.03 and 0.89 +/- 0.03 were synthesized by the addition of sodium bicarbonate of concentrations 40 and 80 mg/mL and ascorbic acid of concentrations 0.05 and 0.1 mol/L, respectively. Poly(ethylene glycol) diacrylate (PEG-DA) was utilized as a cross-linker. The molecular weight between cross-links had a significant effect on weight loss after 12 weeks, where samples with M(C) of 1,880 +/- 320 synthesized with a P(PF-co-EG):PEG-DA ratio of 3:1 had a significantly greater mass loss due to degradation than those with M(C) of 1,000 +/- 100 synthesized with a P(PF-co-EG):PEG-DA ratio of 1:1. In contrast, porosity played a minimal role in determining the weight loss. Mechanical testing of the hydrogels under confined compression showed a decrease in compressive modulus over the degradation time for all formulations. In addition, an increase in hydrogel equilibrium water content and pore wall thickness was observed with degradation time, whereas the hydrogel porosity and surface area density remained invariant. The results from microcomputed tomography corroborated with the rest of the measurements and indicated a bulk degradation mechanism of the macroporous hydrogels.     

Chemical composition of agars from a newly reported Japanese agarophyte,Gracilariopsis lemaneiformis

The chemical composition of agars from Gracilariopsis lemaneiformis, newly reported from Japan, was investigated. Native agars were isolated by a sequential extraction of plants in water at 22 °C and 100 °C, and in boiling 20, 40 and 60° ethanol. Agars in each extract were analyzed by chemical methods, ¹H, ¹³C NMR; and IR spectroscopy. The highest yield of agar (total carbohydrate) was obtained from the 40° ethanol extract (55°). Highest sulfate content was attained in non-alkali treated agars extracted with hot water (4.81°, DS 0.2). The 3,6-anhydrogalactose content was highest in the 40° ethanol extract (36.1° in non-alkali treatment, 40.3° in alkali treatment). The highest methoxyl content (6.51°, DS 0.66) was obtained in the 60° ethanol extract. The G. lemaneiformis agar is composed of the biological precursor to agarobiose repeating units and agarobiose containing 6-O-methyl agarobiose and a small amount of 2-O-methyl-α-l-galactopyranose residues. Alkali treatment improved the chemical quality of the agar fractions, which was comparable with Japanese commercial agar and agarose.