Bioresorbable and nonresorbable macroporous thermosensitive hydrogels prepared by cryopolymerization. Role of the cross-linking agent

Macroporous poly( N-isopropylacrylamide) (pNIPA) gels (so-called cryogels), cross-linked with different bis-acrylic compounds, N,N'-methylenebisacrylamide (MBAAm) and dimethacrylate-tyrosine-lysine-tyrosine (DMTLT), were prepared through free-radical polymerization at subzero temperature in dioxane/water media. DMTLT is a hydrolytically degradable cross-linker with relatively hydrophobic character. The effects of different synthesis conditions, namely the concentration of monomers, the cross-linker, and the initiator in the reaction mixture, on the structure of the pNIPA-cryogels have been studied. The equilibrium swelling ratio of the DMTLT cross-linked pNIPA cryogels at temperatures below lower critical solution temperature (LCST) of pNIPA, was over ten times higher than that of the gels synthesized at room temperature from the same feed composition. The MBAAm cross-linked pNIPA cryogels synthesized in water exhibited the highest equilibrium swelling and the fastest response. The critical transition temperature, T c, was lower ( T c approximately 31 degrees C) for pNIPA-cryogels synthesized in dioxane/water media or cross-linked with DMTLT as compared to MBAAm cross-linked pNIPA cryogels synthesized in water (T c approximately 33 degrees C). Scanning electron microscopy (SEM) revealed different porous structure and pore surface morphology depending on the cross-linker (MBAAm or DMTLT) and the solvent (water or dioxane/water) used. Gels and cryogels were also characterized by SAXS, showing that the nanostructure of the samples is related to swelling.     

Synthesis and characterization of injectable poly(N-isopropylacrylamide-co-acrylic acid) hydrogels with proteolytically degradable cross-links

Hydrogels composed of N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc) were prepared by redox polymerization with peptide cross-linkers to create an artificial extracellular matrix (ECM) amenable for testing hypotheses regarding cell proliferation and migration in three dimensions. Peptide degradable cross-linkers were synthesized by the acrylation of the amine groups of glutamine and lysine residues within peptide sequences potentially cleavable by matrix metalloproteinases synthesized by mammalian cells (e.g., osteoblasts). With the peptide cross-linker, loosely cross-linked poly(N-isopropylacrylamide-co-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content, and enzymatic degradation properties were investigated. The peptide-cross-linked P(NIPAAm-co-AAc) hydrogels were pliable and fluidlike at room temperature and could be injected through a small-diameter aperture. The LCST of peptide-cross-linked hydrogel was influenced by the monomer ratio of NIPAAm/AAc but not by cross-linking density within the polymer network. A peptide-cross-linked hydrogel with a 97/3 molar ratio of NIPAAm/AAc exhibited a LCST of approximately 34.5 degrees C. Swelling was influenced by NIPAAm/AAc monomer ratio, cross-linking density, and swelling media; however, all hydrogels maintained more than 90% water even at 37 degrees C. In enzymatic degradation studies, breakdown of the peptide-cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on both the concentration of collagenase and the cross-linking density. These results suggest that peptide-cross-linked P(NIPAAm-co-AAc) hydrogels can be tailored to create environmentally-responsive artificial extracellular matrixes that are degraded by proteases.     

Self-gelling primaquine-gum arabic conjugate: an injectable controlled delivery system for primaquine

Primaquine, an 8-aminoquinoline, forms a cross-linked gel with periodate-oxidized gum arabic rapidly by simply mixing the drug with the oxidized polysaccharide due to Schiff's base formation between the two amino groups of primaquine and the aldehyde groups in the oxidized polysaccharide. The speed of gelation is determined by the degree of oxidation of polysaccharide, its quantity, and the drug payload. Estimation of the cross-linking density of the gels showed that the higher is the degree of oxidation of gum arabic, the higher is the cross-linking density. In vitro release of primaquine into phosphate buffered saline (PBS) at 37 degrees C demonstrated that the extent of release depended on the cross-linking density and drug payload. Repeated extraction using PBS soon after gel formation showed that not all of the primaquine was conjugated to the polysaccharide and the release seen in vitro was mostly from the unconjugated drug especially from matrices with higher cross-linking density. The gels were found to degrade in PBS, the kinetics of degradation being dependent on the cross-linking density. Cytotoxicity evaluation using MTT assay against L929 mouse fibroblasts showed that oxidized gum arabic having a degree of oxidation of 50% was only very mildly cytotoxic at a concentration of 0.025 g/mL. An injectable, biodegradable drug depot with controlled release of primaquine over several days or weeks would be advantageous for long-term delivery of this drug against malaria or leishmaniasis, and the present study shows that a primaquine-polymer conjugate that can be formed in situ could be an interesting possibility.     

Influence of network structure on the degradation of photo-cross-linked PLA-b-PEG-b-PLA hydrogels

Triblock copolymers of functionalized poly(lactic acid)-b-poly(ethylene glycol)-b-poly(lactic acid) (PLA-b-PEG-b-PLA) have been widely investigated as precursors for fabricating resorbable polymeric drug delivery vehicles and tissue engineering scaffolds. Previous studies show degradation and erosion behavior of PLA-b-PEG-b-PLA hydrogels to rely on macromer chemistry as well as structural characteristics of the cross-linked networks. In this research, the degradation kinetics of diacrylated PLA-b-PEG-b-PLA copolymers as soluble macromers and cross-linked gels are directly compared as a function of macromer concentration, buffer pH, and ionic strength. The pseudo first-order rate constants for degradation of soluble macromers increase with water concentration and show a minimum at intermediate pH values, but are insensitive to ionic strength. The degradation rate constants for covalently cross-linked gels display a greater sensitivity to local water concentration and a minimum at lower pH values than corresponding soluble macromers. In addition, ionic strength significantly affects the rate of gel degradation due to the direct correlation between the degree of network ionization and gel water content.     

Controllable degradation product migration from cross-linked biomedical polyester-ethers through predetermined alterations in copolymer composition

Uniformly degrading biomaterials with adjustable degradation product migration rates were customized by combining the advantages of cross-linked poly(epsilon-caprolactone) with the hydrophilic character of poly(1,5-dioxepan-2-one). Hydrolytic degradation of these random cross-linked networks using 2,2'-bis-(epsilon-caprolactone-4-yl) propane (BCP) as the cross-linking agent was studied for up to 546 days in phosphate buffer solution at pH 7.4 and 37 degrees C. The hydrophilicity of the materials was altered by varying the copolymer compositions. After different hydrolysis times the materials were characterized, and the degradation products were extracted from the buffer solution and analyzed. Fourier transform infrared spectroscopy, differential scanning calorimetry, atomic force microscopy, scanning electron microscopy, and gas chromatography-mass spectrometry were used to observe the changes taking place during the hydrolysis. From the results it was concluded that degradation profiles and migration of degradation products are controllable by tailoring the hydrophilicity of cross-linked polyester-ether networks.     

Oxidized mono-, di-, tri-, and polysaccharides as potential hemoglobin cross-linking reagents for the synthesis of high oxygen affinity artificial blood substitutes

Various oxidized mono/di/tri/poly saccharides were studied as potential hemoglobin (Hb) cross-linkers in order to produce oxygen carriers with high oxygen affinities (low P(50)'s) and high molecular weights (therefore lower macromolecular diffusivities compared to tetrameric Hb). Such physical properties were desired to produce polymerized hemoglobins (PolyHbs) with oxygen release profiles similar to that of human blood, as was demonstrated in work by Winslow (1). In this present study, bovine hemoglobin was cross-linked with a variety of oxidized (ring-opened) saccharides, which resulted in cross-linked Hb species ranging in size from 64 to 6400 kDa (depending on the particular oxidized saccharide used in the reaction) and P(50)'s ranging from 6 to 15 mmHg. A parallel synthetic approach was used to synthesize these carbohydrate-hemoglobin conjugates, and asymmetric flow field-flow fractionation (AFFF) coupled with multi-angle static light scattering (MASLS) was used to measure the absolute molecular weight distribution of these PolyHb dispersions. Cross-linking reactions were conducted at two pHs (6 and 8), with larger cross-linked Hb species produced at pH 8 (where hydrolysis was most likely to occur between glycosidic bonds linking adjacent saccharide rings) rather than at pH 6. The largest molecular weight species formed from these reactions consisted of Hb cross-linked with ring-opened lactose, maltose, methylglucopyranoside, sucrose, trehalose, and 15 kDa and 71 kDa dextran at high pH (pH 8). The most promising Hb cross-linker was methylglucopyranoside, which resulted in very large cross-linked Hb species, with low P(50)'s and lower methemoglobin (metHb) levels compared to the other Hb cross-linking reagents.     

Use of the photoaffinity cross-linking agent N-hydroxysuccinimidyl-4-azidosalicylic acid to characterize salivary-glycoprotein-bacterial interactions.

The present study has utilized the iodinatable cross-linking agent N-hydroxysuccinimidyl-4-azidosalicylic acid (ASA) to examine the specific interaction between the proline-rich glycoprotein (PRG) of human parotid saliva and Streptococcus sanguis G9B. The binding of 125I-ASA-PRG to Streptococcus sanguis G9B displayed saturation kinetics, reversibility and was inhibited by unlabelled PRG. Inhibition studies with other glycoproteins and saccharides indicated that binding was mediated by a bacterial adhesin with specificity towards N-acetylneuraminic acid, galactose, and N-acetylgalactosamine. After cross-linking, the 125I-ASA-PRG-adhesin complex could be extracted with SDS and separated from uncoupled 125I-ASA-PRG by gel filtration on Sepharose CL-6B. Approx. 1% of the 125I-ASA-PRG was cross-linked to the bacterial surface. Examination of the 125I-ASA-PRG-adhesin complex by SDS/polyacrylamide-gel electrophoresis/fluorography on 5% -(w/v)-polyacrylamide gels revealed that PRG was bound to two bacterial components. These findings support our previous suggestion that human salivary glycoproteins can specifically interact with oral streptococci and that these interactions occur between the glycoprotein's carbohydrate units and lectin(s) on the bacterial cell surface.     

Determining the dimensions of the drug-binding domain of human P-glycoprotein using thiol cross-linking compounds as molecular rulers

The human multidrug resistance P-glycoprotein (P-gp) interacts with a broad range of compounds with diverse structures and sizes. There is considerable evidence indicating that residues in transmembrane segments 4-6 and 10-12 form the drug-binding site. We attempted to measure the size of the drug-binding site by using thiol-specific methanethiosulfonate (MTS) cross-linkers containing spacer arms of 2 to 17 atoms. The majority of these cross-linkers were also substrates of P-gp, because they stimulated ATPase activity (2.5- to 10.1-fold). 36 P-gp mutants with pairs of cysteine residues introduced into transmembrane segments 4-6 and 10-12 were analyzed after reaction with 0.2 mm MTS cross-linker at 4 degrees C. The cross-linked product migrated with lower mobility than native P-gp in SDS gels. 13 P-gp mutants were cross-linked by MTS cross-linkers with spacer arms of 9-25 A. Vinblastine and cyclosporin A inhibited cross-linking. The emerging picture from these results and other studies is that the drug-binding domain is large enough to accommodate compounds of different sizes and that the drug-binding domain is "funnel" shaped, narrow at the cytoplasmic side, at least 9-25 A in the middle, and wider still at the extracellular surface.     

In situ forming chitosan hydrogels prepared via ionic/covalent co-cross-linking

In situ forming chitosan hydrogels have been prepared via coupled ionic and covalent cross-linking. Thus, different amounts of genipin (0.05, 0.10, 0.15, and 0.20% (w/w)), used as a chemical cross-linker, were added to a solution of chitosan that was previously neutralized with a glycerol-phosphate complex (ionic cross-linker). In this way, it was possible to overcome the pH barrier of the chitosan solution, to preserve its thermosensitive character, and to enhance the extent of cross-linking in the matrix simultaneously. To investigate the contributions of the ionic cross-linking and the chemical cross-linking, separately, we prepared the hydrogels without the addition of either genipin or the glycerol-phosphate complex. The addition of genipin to the neutralized solution disturbs the ionic cross-linking process and the chemical cross-linking becomes the dominant process. Moreover, the genipin concentration was used to modulate the network structure and performance. The more promising formulations were fully characterized, in a hydrated state, with respect to any equilibrium swelling, the development of internal structure, the occurrence of in vitro degradability and cytotoxicity, and the creation of in vivo injectability. Each of the hydrogel systems exhibited a notably high equilibrium water content, arising from the fact that their internal structure (examined by conventional SEM, and environmental SEM) was highly porous with interconnecting pores. The porosity and the pore size distribution were quantified by mercury intrusion porosimetry. Although all gels became degraded in the presence of lysozyme, their degradation rate greatly depended on the genipin load. Through in vitro viability tests, the hydrogel-based formulations were shown to be nontoxic. The in vivo injection of a co-cross-linking formulation revealed that the gel was rapidly formed and localized at the injection site, remaining in position for at least 1 week.     

Cross-linking density alters early metabolic activities in chondrocytes encapsulated in poly(ethylene glycol) hydrogels and cultured in the rotating wall vessel

In designing a tissue engineering strategy for cartilage repair, selection of both the bioreactor, and scaffold is important to the development of a mechanically functional tissue. The hydrodynamic environment associated with many bioreactors enhances nutrient transport, but also introduces fluid shear stress, which may influence cellular response. This study examined the combined effects of hydrogel cross-linking and the hydrodynamic environment on early chondrocyte response. Specifically, chondrocytes were encapsulated in poly(ethylene glycol) (PEG) hydrogels having two different cross-linked structures, corresponding to a low and high cross-linking density. Both cross-linked gels yielded high water contents (92% and 79%, respectively) and mesh sizes of 150 and 60 A respectively. Cell-laden PEG hydrogels were cultured in rotating wall vessels (RWV) or under static cultures for up to 5 days. Rotating cultures yielded low fluid shear stresses (< or = 0.11 Pa) at the hydrogel periphery indicating a laminar hydrodynamic environment. Chondrocyte response was measured through total DNA content, total nitric oxide (NO) production, and matrix deposition for glycosaminoglycans (GAG). In static cultures, gel cross-linking had no effect on DNA content, NO production, or GAG production; although GAG production increased with culture time for both cross-linked gels. In rotating cultures, DNA content increased, NO production decreased, and overall GAG production decreased when compared to static controls for the low cross-linked gels. For the high cross-linked gels, the hydrodynamic environment had no effect on DNA content, but exhibited similar results to the low cross-linked gel for NO production, and matrix production. Our findings demonstrated that at early culture times, when there is limited matrix production, the hydrodynamic environment dramatically influences cell response in a manner dependent on the gel cross-linking, which may impact long-term tissue development.     

Affinity labeling of the sialoglycopeptide antimitogen receptor

An 18-kDa 125I-sialoglycopeptide growth inhibitor was covalently cross-linked to its binding site on intact cultured Swiss 3T3 cells by three bifunctional cross-linkers with short (dimethyl adipimate), medium (disuccinimidyl suberate), and long (bis(2-succinimidooxycarbonyloxyethyl)sulfone) chain lengths. Analysis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and autoradiography demonstrated a band of Mr approximately 168,000 regardless of which cross-linker was used. The labeling of this band was specific in that it was prevented by excess unlabeled inhibitor and the apparent molecular weight of the cross-linked receptor-ligand complex was unchanged by treatment with reducing agent. The efficiency of the cross-linking was increased by increasing pH, and the extent of covalent cross-linking was dependent on the concentration of the bifunctional reagent. Octyl glucoside and sodium dodecyl sulfate were effective in solubilizing the receptor while Triton X-100 did not extract the receptor from the plasma membrane. These observations suggest that the 168-kDa binding species represents the 125I-sialoglycopeptide cross-linked to a specific plasma membrane receptor and that the receptor does not appear to contain interchain disulfide bonds.     

Characterization, size estimation and solubilization of alpha-macroglobulin complex receptors in liver membranes

Receptors for alpha 2-macroglobulin-proteinase complexes have been characterized in rat and human liver membranes. The affinity for binding of 125I-labelled alpha 2-macroglobulin.trypsin to rat liver membranes was markedly pH-dependent in the physiological range with maximum binding at pH 7.8-9.0. The half-time for association was about 5 min at 37 degrees C in contrast to about 5 h at 4 degrees C. The half-saturation constant was about 100 pM at 4 degrees C and 1 nM at 37 degrees C (pH 7.8). The binding capacity was approx. 300 pmol per g protein for rat liver membranes and about 100 pmol per g for human membranes. Radiation inactivation studies showed a target size of 466 +/- 71 kDa (S.D., n = 7) for alpha 2-macroglobulin.trypsin binding activity. Affinity cross-linking to rat and human membranes of 125I-labelled rat alpha 1-inhibitor-3.chymotrypsin, a 210 kDa analogue which binds to the alpha 2-macroglobulin receptors in hepatocytes (Gliemann, J. and Sottrup-Jensen, L. (1987) FEBS Lett. 221, 55-60), followed by SDS-polyacrylamide gel electrophoresis, revealed radioactivity in a band not distinguishable from that of cross-linked alpha 2-macroglobulin (720 kDa). This radioactivity was absent when membranes with bound 125I-alpha 1-inhibitor-3 complex were treated with EDTA before cross-linking and when incubation and cross-linking were carried out in the presence of a saturating concentration of unlabelled complex. The saturable binding activity was maintained when membranes were solubilized in the detergent 3-[(3-cholamidopropyl)dimethylammonio]propane sulfonate (CHAPS) and the size of the receptor as estimated by cross-linking experiments was shown to be similar to that determined in the membranes. It is concluded that liver membranes contain high concentrations of an approx. 400-500 kDa alpha 2-macroglobulin receptor soluble in CHAPS. The soluble preparation should provide a suitable material for purification and further characterization of the receptor.     

Cross-linking of wheat starch and hydroxypropylated wheat starch in alkaline slurry with sodium trimetaphosphate

Wheat starch was cross-linked at 40 °C and pH 11.0 by slurrying the starch (30% solids) in a solution of sodium trimetaphosphate (STMP), sodium hydroxide, and sodium sulfate. The extent of cross-linking was determined by an increase in alkaline fluidity or by a decrease in alkaline clarity. Response surface analysis showed that cross-linking increased with increasing levels of STMP (0.5-1.5%, based on starch, bos) and sodium sulfate (0–4.0%, bos) over a reaction period of 120–720 min. A regression equation with first and second order terms showed that STMP and sodium sulfate concentrations and the reaction time accounted for 99% of the variability in alkaline fluidity. Wheat starch (37% slurry) was hydroxypropylated by reaction with propylene oxide (8%, bos) for 24h at 45 °C in alkali (pH 11.5) containing 16.0% sodium sulfate (bos). The hydroxypropylated (4.5wt%) wheat starch (DS 0.12-0.13) was not isolated but was cross-linked with STMP (0.1-0.5%, bos) over a 10–40 min reaction period. A comparison of pasting curves at pH 3.5 showed that some of the cross-links produced by STMP were less stable than those produced by phosphoryl chloride, indicating a low level of pyrophosphate as well as monophosphate cross-links. The less stable cross-links were diminished by changing reaction conditions with STMP.     

Properties of carboxymethylated cross-linked hemoglobin A

The selective carboxymethylation of the N-terminal amino groups of hemoglobin A with glyoxylic acid and sodium cyanoborohydride has been studied as a function of the state of ligation of hemoglobin. The N-terminal residues have been established as the primary sites of reaction by peptide mapping of the tryptic digest of each chain and subsequent amino acid analysis of the modified peptides. With oxyhemoglobin, the desired derivatives with a carboxymethyl group at the N-terminal of either or both chains amounted to 55% [Di Donato, A., Fantl, W. J., Acharya, A. S., & Manning, J. M. (1983) J. Biol. Chem. 258, 11890-11895]. In the present study it is shown that with deoxyhemoglobin the amount of the desired derivative is increased to 75%. The oxygen equilibrium curve of hemoglobin A carboxymethylated on its four N-terminal residues [0.5 mM as tetramer in 50 mM [bis(2-hydroxyethyl)amino]tris(hydroxymethyl)methane (Bis-Tris), pH 7.5, 37 degrees C] had a P50 value of 30 mmHg (Hill coefficient n = 2.8, alkaline Bohr value = 0.4) compared to a P50 of 9 mmHg for unmodified hemoglobin under the same conditions (n = 2.5, alkaline Bohr value = 0.5). In carboxymethylated oxyhemoglobin A, cross-linked with the mild agent glycolaldehyde for 3.5 h, there was 85% of Mr 64,000 species and 15% of Mr 128,000 or higher species. For the former, the extent of cross-linking between two subunits was 19%. For the latter, there was 29% of two cross-linked subunits and 13% of three cross-linked subunits. Termination of cross-linking, which may be desirable in some circumstances, can be successfully achieved with isonicotinic acid hydrazide.(ABSTRACT TRUNCATED AT 250 WORDS)     

Swelling behavior and controlled release of theophylline and sulfamethoxazole drugs in beta-lactoglobulin protein gels obtained by phase separation in water/ethanol mixture

Physically cross-linked beta-lactoglobulin (BLG) protein gels containing theophylline and sulfamethoxazole low molecular weight drugs were prepared in 50% ethanol solution at pH 8 and two protein concentrations (6 and 7% (w/v)). Swelling behavior of cylindrical gels showed that, irrespective of the hydrated or dehydrated state of the gel, the rate of swelling was the highest in water. When the gels were exposed to water, they first showed a swelling phase in which their weight increased 3 and 30 times for hydrated and dehydrated gels, respectively, due to absorption of water, followed by a dissolution phase. The absorption of solvent was however considerably reduced when the gels were exposed to aqueous buffer solutions. The release behavior of both theophylline and sulfamethoxazole drugs from BLG gels was achieved in a time window ranging from 6 to 24 h. The drug release depended mainly on the solubility of the drugs and the physical state of the gel (hydrated or dry form). Analysis of drug release profiles using the model of Peppas showed that diffusion through hydrated gels was governed by a Fickian process whereas diffusion through dehydrated gels was governed partly by the swelling capacities of the gel but also by the structural rearrangements inside the network occurring during dehydration step. By a judicious selection of protein concentration, hydrated or dehydrated gel state, drug release may be modulated to be engineered suitable for pharmaceutical as well as cosmetics and food applications.     

Studies on the oligomeric state of isolated cytochrome oxidase using cross-linking reagents

(1) Sucrose gradient centrifugation of cytochrome oxidase in the presence of Triton X-100 gave one slowly sedimenting green band. After cross-linking with dithiobis(succinimidylpropionate) (DSP), two green bands were observed, one sedimenting like the control and the other one more rapidly. Only the slowly sedimenting band was observed if the cross-linker was cleaved by dithiothreitol before centrifugation. (2) The rapidly sedimenting band in the Triton-containing sucrose gradient is probably the internally cross-linked dimer of cytochrome oxidase; the one sedimenting slowly is the monomeric enzyme. (3) Cross-linking with DSP after monomerization yields a small fraction of internally cross-linked dimers in addition to the internally cross-linked monomers. Under similar conditions, but using the shorter cross-linker disuccinimidyl tartarate (DST), no dimers are detected. (4) Both DSP and DST cross-link the dimeric enzyme so that it could no longer be monomerized by centrifugation in Triton, unless the cross-link is cleaved. (5) Polypeptide analysis using two-dimensional gel electrophoresis of cross-linked dimers and monomers suggest that subunit VIb is involved in intermonomeric cross-linking of dimeric enzyme by DSP.     

Glucose-responsive polymer gel bearing phenylborate derivative as a glucose-sensing moiety operating at the physiological pH

The work attempts to prepare a totally synthetic, glucose-responsive polymer gel bearing a phenylborate derivative as a sensor moiety to glucose, for future use as a self-regulated insulin delivery system. The molecular strategies to enable the system to be operated under physiological conditions (pH 7.4, 37 degrees C) are presented that involve the use of a novel phenylborate derivative [4-(1,6-dioxo-2,5-diaza-7-oxamyl) phenylboronic acid: DDOPBA] possessing an appreciably low pK(a) ( approximately 7.8), the adoption of poly(N-isopropylmethacrylamide) (PNIPMAAm) for the main chain, which itself undergoes a sharp thermo-induced phase transition at its LCST around 40 degrees C, as well as the introduction of a carboxyl group of methacrylic acid as the third comonomer. Glucose-responsive behaviors of the obtained gels were evaluated based on the changes in the equilibrium swelling degree determined in the presence and the absence of glucose, for various pH and temperature conditions. As a consequence of the combined molecular effects, a sufficient sensitivity of the system was accomplished at physiological pH and in the temperature range close to the physiological condition such as 30 degrees C. Furthermore, the glucose-induced continuous volume changes of the gels were demonstrated under those conditions, which occurred in a remarkably concentration-dependent manner. In these experiments, the critical glucose concentrations to induce the gels' responses in the range of normoglycemic sugar level were observed. These observations may provide us with an excellent prospect for the use of the gel as a self-regulated, insulin-delivery system discretely switching the release at the normoglycemia.     

Photo-cross-linking of type I collagen gels in the presence of smooth muscle cells: mechanical properties,cell viability,and function

The effectiveness of photomediated cross-linking of type I collagen gels in the presence of rat aortic smooth muscle cells (RASMC) as a method to enhance gel mechanical properties while retaining native collagen triple helical structure and maintaining high cell viability was investigated. Collagen was chemically modified to incorporate an acrylate moiety. Collagen methacrylamide was cast into gels in the presence of a photoinitiator along with RASMC. The gels were cross-linked using visible light irradiation. Neither acrylate modification nor the cross-linking reaction altered collagen triple helical content. The cross-linking reaction, however, moved the denaturation temperature beyond the physiologic range. A twelve-fold increase in shear modulus was observed after cross-linking. Cell viability in the range of 70% (n = 4, p > 0.05) was observed in the photo-cross-linked gels. Moreover the cells were able to contract the cross-linked gel in a manner commensurate with that observed for natural type I collagen. Methacrylate-mediated photo-cross-linking is a facile route to improve mechanical properties of collagen gels in the presence of cells while maintaining high cell viability. This enhances the potential for type I collagen gels to be used as scaffolds for tissue engineering.     

Characterization of the chemical degradation of hyaluronic acid during chemical gelation in the presence of different cross-linker agents

Dynamic light scattering (DLS) and rheological experiments have been performed on semidilute aqueous hyaluronic acid (HA) solutions during the chemical cross-linking process with a water-soluble carbodiimide (WSC) to produce a hydrogel. The formation and destruction of the gel are characterized. The results suggest that the gel is cross-linked via ester linkages and at later stage in the process, the omnipresent hydrolysis of interpolymer ester linkages and glycosidic bonds prevails, leading to disruption of the gel. The process of forming and breaking the gel is affected by the cross-linker concentration and pH. The cross-linking of HA with WSC in the presence of L-lysine methyl ester produced a gel with a longer time of gelation and the degradation of the gel was prolonged because of the more stable amide bond formation as the cross-link. By using the Ugi multicomponent condensation reaction, interpolymer cross-linking occurs via the formation of amide linkages and a stable gel evolves, which is only slightly degraded over an extended time window. DLS measurements on HA solutions with WSC show the emergence of a long-time power-law tail in the correlation functions at conditions both before and beyond the viscosity maximum. At a late stage in the gel-breakage regime, the power-law profile of the decay disappears and the long-time tail of the correlation function can be portrayed by a stretched exponential. The findings indicate that the power-law feature is associated with the confinement of chain dynamics and anomalous diffusion in the system. At later times, the connectivity is lost due to fragmentation of the network, and the long-time stretched exponential decay in the correlation function reflects the relaxation of clusters of various sizes.     

Dynamic compressive loading influences degradation behavior of PEG-PLA hydrogels

Biodegradable hydrogels are attractive 3D environments for cell and tissue growth. In cartilage tissue engineering, mechanical stimulation has been shown to be an important regulator in promoting cartilage development. However, the impact of mechanical loading on the gel degradation kinetics has not been studied. In this study, we examined hydrolytically labile gels synthesized from poly(lactic acid)-b-poly(ethylene glycol)-b-poly-(lactic acid) dimethacrylate macromers, which have been used for cartilage tissue engineering. The gels were subject to physiological loading conditions in order to examine the effects of loading on hydrogel degradation. Initially, hydrogels were formed with two different cross-linking densities and subject to a dynamic compressive strain of 15% at 0.3, 1, or 3 Hz. Degradation behavior was assessed by mass loss, equilibrium swelling and compressive modulus as a function of degradation time. From equilibrium swelling, the pseudo-first-order reaction rate constants were determined as an indication of degradation kinetics. The application of dynamic loading significantly enhanced the degradation time for the low cross-linked gels (P < 0.01) while frequency showed no statistical differences in degradation rates or bulk erosion profiles. In the higher cross-linked gels, a 3 Hz dynamic strain significantly increased the degradation kinetics resulting in an overall faster degradation time by 6 days compared to gels subject to the 0.3 and 1 Hz loads (P < 0.0001). The bioreactor set-up also influenced overall degradation behavior where the use of impermeable versus permeable platens resulted in significantly lower degradation rate constants for both cross-linked gels (P < 0.001). The compressive modulus exponentially decreased with degradation time under dynamic loading. Together, our findings indicate that both loading regime and the bioreactor setup influence degradation and should be considered when designing and tuning a biodegradable hydrogel where mechanical stimulation is employed.