乙醇预处理麦秆的酶解性能研究简

采用H2 SO4催化和自催化乙醇法对麦秆进行预处理,比较预处理后麦秆的主要化学组成、纤维素酶解性能和半同步糖化发酵生产乙醇特性,并进行物料衡算。结果表明：H2 SO4催化和自催化乙醇预处理过程中纤维素固体回收率大于90％。添加非离子表面活性剂吐温20和吐温80没有显著提高H2 SO4催化乙醇预处理后纤维素的酶解葡萄糖得率及半同步糖化发酵过程中乙醇的产量,而对自催化乙醇处理后麦秆的酶解和半同步糖化发酵过程有一定程度的促进作用,相应的酶解葡聚糖转化率由72.7％提高到85.0％,而半同步糖化发酵过程中乙醇质量浓度提高了11.4％。物料衡算结果表明：酸催化和自催化乙醇预处理后葡聚糖回收率分别为91.0％和95.4％;半同步糖化发酵生产乙醇的得率分别为10.4和11.6 g（按100 g原料计）。     

乙醇预处理麦秆的酶解性能研究

采用H2SO4催化和自催化乙醇法对麦秆进行预处理,比较预处理后麦秆的主要化学组成、纤维素酶解性能和半同步糖化发酵生产乙醇特性,并进行物料衡算。结果表明:H2SO4催化和自催化乙醇预处理过程中纤维素固体回收率大于90%。添加非离子表面活性剂吐温20和吐温80没有显著提高H2SO4催化乙醇预处理后纤维素的酶解葡萄糖得率及半同步糖化发酵过程中乙醇的产量,而对自催化乙醇处理后麦秆的酶解和半同步糖化发酵过程有一定程度的促进作用,相应的酶解葡聚糖转化率由72.7%提高到85.0%,而半同步糖化发酵过程中乙醇质量浓度提高了11.4%。物料衡算结果表明:酸催化和自催化乙醇预处理后葡聚糖回收率分别为91.0%和95.4%;半同步糖化发酵生产乙醇的得率分别为10.4和11.6 g(按100 g原料计)。     

稀碱预处理棕榈残渣制备纤维乙醇

以棕榈残渣(Empty fruit bunch,EFB)为原料,通过预处理、酶解、发酵等过程制备纤维乙醇.首先对比了碱、碱/过氧化氢等预处理条件对棕榈残渣组成及酶解的影响,结果表明稀碱预处理效果较好.适宜的稀碱预处理条件为:NaOH浓度为1％,固液比为1∶10,在40℃浸泡24 h后于121℃下保温30 min,在该条件下,EFB的固体回收率为74.09％,纤维素、半纤维素和木质素的含量分别为44.08％、25.74％和13.89％.对该条件下预处理后的固体样品,以底物浓度5％、酶载量30 FPU/g底物酶解72 h,纤维素和半纤维素的酶解率分别达到84.44％和89.28％.进一步考察了酶载量和底物浓度对酶解的影响以及乙醇批式同步糖化发酵,当酶载量为30 FPU/g底物,底物浓度由5％增加至25％时,利用酿酒酵母Saccharomyces cerevisiae(接种量为5％,VIV)发酵72 h后乙醇的浓度分别为9.76 g/L和35.25 g/L,可分别达到理论得率的79.09％和56.96％.     

一株乳杆菌对蒸汽爆破处理纤维物料的乳酸发酵研究

用筛选得到的一株乳酸杆菌ZJU-1(Lactobacillus sp．)对蒸汽爆破预处理纤维物料的乳酸发酵进行了研究,结果表明该菌株能对蒸汽爆破处理的纤维物料酶解液进行乳酸发酵,在还原糖质量浓度为52．1mg/mL时,乳酸量为42．1mg/mL;与纤维素酶的酶解过程相耦合,对蒸汽爆破处理的物料进行同时糖化乳酸发酵。其发酵周期比分步糖化发酵的过程周期短,在底物质量分数为80mg/mL,接种量为10％,温度为45％时,乳酸量为45．3mg/mL。     

常压甘油自催化预处理麦草浓醪发酵纤维素乙醇

目前纤维素乙醇成本偏高的根本原因在于没有达到淀粉质乙醇发酵水平的"三高"(高浓度、高转化率和高效率)指标,提高水解糖液浓度和避免发酵抑制物来实现浓醪发酵,是解决问题的关键。文中以常压甘油自催化预处理麦草为底物,尝试采用不同发酵策略,探讨其浓醪发酵产纤维素乙醇的可行性。在优化培养条件(15%底物浓度,加酶量30 FPU/g干底物,温度37℃,接种量10%)下同步糖化发酵72 h,纤维素乙醇产量为31.2 g/L,转化率为73%,发酵效率0.43 g/(L·h);采用半同步(预酶解24 h)糖化发酵72 h,纤维素乙醇浓度达到33.7 g/L,转化率为79%,发酵效率为0.47 g/(L·h),其中(半)同步糖化发酵中90%以上纤维素已被糖化水解用于发酵;采用分批补料式半同步糖化发酵,补料到基质浓度相当于30%,发酵72 h时纤维素乙醇产量达到51.2 g/L,转化率为62%,发酵效率为0.71 g/(L·h)。在所有浓醪发酵中乙酸不足3 g/L,无糠醛和羟甲基糠醛等发酵抑制物。以上结果表明,常压甘油自催化预处理木质纤维素基质适用于纤维素乙醇发酵;分批补料式半同步糖化发酵策略可用来进行浓醪纤维素乙醇发酵;未来工作中提高基质纯度和强化酶解产糖是浓醪纤维素乙醇达到"三高"指标的关键。     

白腐真菌Pleurotus sajor-caju预处理对红麻秸秆发酵乙醇的影响

为研究微生物法预处理对红麻秸秆中木质素的降解及后续的红麻纤维素酶促糖化和发酵效率的影响,将白腐真菌Pleurotus sajor-caju接种在红麻秸秆培养基上固态培养,对红麻秸秆进行预处理。经P. sajor-caju培养25~35 d后,有效转化红麻秸秆中的木质素,转化率最高可达50.20％,并提高红麻纤维素的酶促水解效率,糖化率达69.33％~78.64％,与对照组相比提高了3.5~4.1倍。以微生物法预处理后的红麻秸秆样品为底物的同步糖化发酵实验表明,发酵72 h,发酵液中乙醇浓度达到18.35~     

碱液湿磨预处理稻草的酶解性能

预处理是提高酶法木质纤维素糖化效率的重要加工过程.本论文对稻草进行碱液湿磨预处理和酶解,探讨了预处理碱液浓度对稻草的成分、结构和酶解的影响,同时利用米氏方程对稻草酶解反应进行动力学分析,求出了米氏常数Km 和最大反应速率rmax.实验结果表明,碱液湿磨预处理明显改善了稻草的酶解性能.未处理稻草酶解的还原糖收率为13.4%、Km 为66.8 mg/mL、rmax 为312.5μmol/(min · mL).采用1%NaOH 溶液对稻草进行预处理1h 后,还原糖收率提高到41.4%,Km 减小到15.9 mg/mL, rmax 提高到666.7μmol/(min · mL).预处理过程中木质素去除、纤维素晶体结构消除、底物可及度增加是酶解中还原糖收率和反应速率上升的主要原因.     

木薯纤维素乙醇发酵的纤维素酶成本评价

木薯中的纤维素成分约占木薯干重的10％(W/W).文中以木薯燃料乙醇生产的木薯纤维素酒渣为原料,从纤维素酶成本角度评估了三种利用木薯纤维素组分发酵生产乙醇的方法,包括木薯纤维素酒渣的直接糖化和乙醇发酵、木薯纤维素酒渣预处理后的糖化与乙醇发酵、木薯乙醇发酵中同步淀粉与纤维素糖化以及乙醇发酵.结果表明,前两种方法的纤维素利用效率不高,酶成本分别达到13602、11659元/吨乙醇.第三种方法,即在木薯乙醇发酵过程同时加入糖化酶和纤维素酶,进行同步淀粉与纤维素糖化,进而进行乙醇发酵,木薯纤维素乙醇的收益最高.发酵结束时的乙醇浓度从101.5g/L提高到107.0g/L,纤维素酶成本为3 589元/吨乙醇.此方法利用木薯纤维素与木薯淀粉同时进行,不会带来额外的设备及操作投入,酶成本低于产品乙醇价格,可实现盈利,因此第三种方法为木薯纤维用于乙醇发酵的最适方法,本研究结果将为木薯乙醇产业深度利用木薯纤维提供依据.     

蒸汽爆破处理沙柳原料酶解条件优化

研究蒸汽爆破预处理对沙柳原料酶解效果的影响,通过响应曲面实验设计法优化蒸汽爆破处理沙柳原料的酶解工艺。结果表明,蒸汽爆破预处理沙柳原料的最佳蒸汽爆破处理条件：压力3.5 MPa、维压时间300 s; 蒸汽爆破最佳酶解条件：pH 4.8、温度53.5 ℃、 每克底物酶加量29.8 FPU。在最优条件下,蒸汽爆破处理沙柳原料的酶解率可以达到最大值87.92%,并验证了数学模型的有效性,试验结果表明蒸汽爆破预处理可以有效提高沙柳原料的水解率。     

碱预处理玉米芯米根霉同步糖化发酵产富马酸

以碱预处理玉米芯渣为原料,采用单因素优化方法优化米根霉同步糖化发酵产富马酸。在此基础上,研究米根霉利用碱预处理玉米芯渣的同步糖化发酵,并与纯糖发酵进行对比。结果表明:在50 g/L底物、(NH4)2SO4质量浓度0.71 g/L、纤维素酶用量20 FPIU(以1 g纤维素计)、Ca CO3加入量30 g/L、接种量10%(体积分数)和装液量50 m L的条件下,米根霉同步糖化发酵过程产富马酸13.78 g/L,而纯糖发酵富马酸生成量仅6.21 g/L。     

Dynamic modeling and analyses of simultaneous saccharification and fermentation process to produce bio-ethanol from rice straw

The rice straw, an agricultural waste from Asians’ main provision, was collected as feedstock to convert cellulose into ethanol through the enzymatic hydrolysis and followed by the fermentation process. When the two process steps are performed sequentially, it is referred to as separate hydrolysis and fermentation (SHF). The steps can also be performed simultaneously, i.e., simultaneous saccharification and fermentation (SSF). In this research, the kinetic model parameters of the cellulose saccharification process step using the rice straw as feedstock is obtained from real experimental data of cellulase hydrolysis. Furthermore, this model can be combined with a fermentation model at high glucose and ethanol concentrations to form a SSF model. The fermentation model is based on cybernetic approach from a paper in the literature with an extension of including both the glucose and ethanol inhibition terms to approach more to the actual plants. Dynamic effects of the operating variables in the enzymatic hydrolysis and the fermentation models will be analyzed. The operation of the SSF process will be compared to the SHF process. It is shown that the SSF process is better in reducing the processing time when the product (ethanol) concentration is high. The means to improve the productivity of the overall SSF process, by properly using aeration during the batch operation will also be discussed.     

The enzymatic hydrolysis and fermentation of pretreated wheat straw to ethanol

Autohydrolysis and ethanol-alkali pulping were used as pretreatment methods of wheat straw for its subsequent saccharification by Trichoderma reesei cellulase. The basic hydrolysis parameters, i.e., reaction time, pH, temperature, and enzyme and substrate concentration, were optimized to maximize sugar yields from ethanol-alkali modified straw. Thus, a 93% conversion of 2.5% straw material to sugar syrup containing 73% glucose was reached in 48 h using 40 filter paper units/g hydrolyzed substrate. The pretreated wheat straw was then fermented to ethanol at 43 degrees C in the simultaneous saccharification and fermentation (SSF) process using T. reesei cellulase and Kluyveromyces fragilis cells. From 10% (w/v) of chemically treated straw (dry matter), 2.4% (w/v) ethanol was obtained after 48 h. When the T. reesei cellulase system was supplemented with beta-glucosidase from Aspergillus niger, the ethanol yield in the SSF process increased to 3% (w/v) and the reaction time was shortened to 24 h.     

Xylanase production in solid state fermentation by Aspergillus niger mutant using statistical experimental designs

The initial moisture content, cultivation time, inoculum size and concentration of basal medium were optimized in solid state fermentation (SSF) for the production of xylanase by an Aspergillus niger mutant using statistical experimental designs. The cultivation time and concentration of basal medium were the most important factors affecting xylanase activity. An inoculum size of 5 x 10(5) spores/g, initial moisture content of 65%, cultivation time of 5 days and 10 times concentration of basal medium containing 50 times concentration of corn steep liquor were optimum for xylanase production in SSF. Under the optimized conditions, the activity and productivity of xylanase obtained after 5 days of fermentation were 5,071 IU/g of rice straw and 14,790 IU l(-1) h(-1), respectively. The xylanase activity predicted by a polynomial model was 5,484 IU/g of rice straw.     

Dilute acid pretreatment, enzymatic saccharification and fermentation of wheat straw to ethanol

Wheat straw consists of 48.57 ± 0.30% cellulose and 27.70 ± 0.12% hemicellulose on dry solid (DS) basis and has the potential to serve as a low cost feedstock for production of ethanol. Dilute acid pretreatment at varied temperature and enzymatic saccharification were evaluated for conversion of wheat straw cellulose and hemicellulose to monomeric sugars. The maximum yield of monomeric sugars from wheat straw (7.83%, w/v, DS) by dilute H₂SO₄ (0.75%, v/v) pretreatment and enzymatic saccharification (45 °C, pH 5.0, 72 h) using cellulase, β-glucosidase, xylanase and esterase was 565 ± 10 mg/g. Under this condition, no measurable quantities of furfural and hydroxymethyl furfural were produced. The yield of ethanol (per litre) from acid pretreated enzyme saccharified wheat straw (78.3 g) hydrolyzate by recombinant Escherichia coli strain FBR5 was 19 ± 1 g with a yield of 0.24 g/g DS. Detoxification of the acid and enzyme treated wheat straw hydrolyzate by overliming reduced the fermentation time from 118 to 39 h in the case of separate hydrolysis and fermentation (35 °C, pH 6.5), and increased the ethanol yield from 13 ± 2 to 17 ± 0 g/l and decreased the fermentation time from 136 to 112 h in the case of simultaneous saccharification and fermentation (35 °C, pH 6.0).     

Simultaneous saccharification and fermentation of acid-pretreated corncobs with a recombinant Saccharomyces cerevisiae expressing beta-glucosidase

To reduce the cellobiose inhibition of exoglucanase and endogulcanase and enhance cellulose hydrolysis during simultaneous saccharification and fermentation (SSF), a beta-glucosidase encoding gene named BGL1 was cloned from Saccharomycopsis fibuligera and integrated into the chromosomal rDNA region of the Saccharomyces cerevisiae industrial strain NAN-27 producing NAN-227. Compared with the parental strain, which had no detectable activity, the beta-glucosidase specific activity in NAN-227 was 1.02 IU/mg of protein. When cellobiose was used as the sole carbon source in a shake-flask, NAN-227 consumed 6.2g/L of cellobiose and produced 3.3g/L of ethanol in 48 h. The yield was 0.532 g/g. The parent strain only consumed 1.92 g/L of cellobiose and no ethanol was detected. During the SSF of acid-pretreated corncobs NAN-227 produced 20 g/L of ethanol at 72 h, which was similar to the parent strain when 20IU of beta-glucosidase/g of substrate was added.     

DiSC (direct saccharification of culms) process for bioethanol production from rice straw

A simple process (the direct-saccharification-of-culms (DiSC) process) to produce ethanol from rice straw culms, accumulating significant amounts of soft carbohydrates (SCs: glucose, fructose, sucrose, starch and β-1,3-1,4-glucan) was developed. This study focused on fully mature culms of cv. Leafstar, containing 69.2% (w/w of dried culms) hexoses from SCs and cellulose. Commercially-available wind-separation equipment successfully prepared a culm-rich fraction with a SC recovery of 83.1% (w/w) from rice straw flakes (54.1% of total weight of rice straw). The fraction was suspended in water (20%, w/w) for starch liquefaction, and the suspension was subjected to a simultaneous saccharification and fermentation with yeast, yielding 5.6% (w/v) ethanol (86% of the theoretical yield from whole hexoses in the fraction) after 24 h fermentation. Thus, the DiSC process produced highly-concentrated ethanol from rice straw in a one vat process without any harsh thermo-chemical pretreatments.     

Ethanol from lignocellulosic materials by a simultaneous saccharification and fermentation process (SFS) with Kluyveromyces marxianus CECT 10875

Simultaneous saccharification and fermentation (SSF) process for ethanol production from various lignocellulosic woody (poplar and eucalyptus) and herbaceous (Sorghum sp. bagasse, wheat straw and Brassica carinata residue) materials has been assayed using the thermotolerant yeast strain Kluyveromyces marxianus CECT 10875. Biomass samples were previously treated in a steam explosion pilot plant to provide pretreated biomass with increased cellulose content relative to untreated materials and to enhance cellulase accessibility. SSF experiments were performed in laboratory conditions at 42 °C, 10% (w/v) substrate concentration and 15 FPU/g substrate of commercial cellulase. The results indicate that it is possible to reach SSF yields in the range of 50–72% of the maximum theoretical SSF yield, based on the glucose available in pretreated materials, in 72–82 h. Maximum ethanol contents from 16 to 19 g/l were obtained in fermentation media, depending on the material tested.     

Production of cellulases and hemicellulases by Aspergillus niger KK2 from lignocellulosic biomass

To investigate the production of cellulases and hemicellulases from Aspergillus niger KK2, solid state fermentation (SSF) was performed by using different ratios of rice straw and wheat bran. When A. niger KK2 was grown on rice straw alone as a solid support in SSF, the maximum FPase activity was 19.5 IU g(-1) in 4 days. Also, CMCase (129 IU g(-1)), beta-glucosidase (100 IU g(-1)), xylanase (5070 IU g(-1)) and beta-xylosidase (193 IU g(-1)) activities were concurrently obtained after 5-6 days of fermentation. The higher enzyme activities produced by A. niger KK2 is a significant advantage from the viewpoint of practical saccharification reaction. Cellulases and hemicellulases produced by A. niger KK2 might be applied to pulp and paper industry, feed industry and chemical industry.     

Effect of substrate and cellulase concentration on simultaneous saccharification and fermentation of steam-pretreated softwood for ethanol production

Economic optimization of the production of ethanol by simultaneous saccharification and fermentation (SSF) requires knowledge about the influence of substrate and enzyme concentration on yield and productivity. Although SSF has been investigated extensively, the optimal conditions for SSF of softwoods have yet not been determined. In this study, SO2-impregnated and steam-pretreated spruce was used as substrate for the production of ethanol by SSF. Commercial enzymes were used in combination with the yeast Saccharomyces cerevisiae. The effects of the concentration of substrate (2% to 10% w/w) and of cellulases (5 to 32 FPU/g cellulose) were investigated. SSF was found to be sensitive to contamination because lactic acid was produced. The ethanol yield increased with increasing cellulase loading. The highest ethanol yield, 68% of the theoretical based on the glucose and mannose present in the original wood, was obtained at 5% substrate concentration. This yield corresponds to 82% of the theoretical based on the cellulose and soluble glucose and mannose present at the start of SSF. A higher substrate concentration caused inefficient fermentation, whereas a lower substrate concentration, 2%, resulted in increased formation of lactic acid, which lowered the yield. Compared with separate hydrolysis and fermentation, SSF gave a higher yield and doubled the productivity.     

STEP ENZYMATIC HYDROLYSIS OF SODIUM HYDROXIDE-PRETREATED CHINESE LIQUOR DISTILLERS' GRAINS FOR ETHANOL PRODUCTION

Distillers' grains are a co-product of ethanol production. In China, only a small portion of distillers' grains have been used to feed the livestock because the amount was so huge. Nowadays, it has been reported that the distillers' grains have the potential for fuel ethanol production because they are composed of lignocelluloses and residual starch. In order to effectively convert distillers' grains to fuel ethanol and other valuable production, sodium hydroxide pretreatment, step-by-step enzymatic hydrolysis, and simultaneous saccharification and fermentation (SSF) were investigated. The residual starch was first recycled from wet distillers' grains (WDG) with glucoamylase to obtain glucose-rich liquid. The total sugar concentration was 21.3 g/L, and 111.9% theoretical starch was hydrolyzed. Then the removed-starch dry distillers' grains (RDDG) were pretreated with NaOH under optimal conditions and the pretreated dry distillers' grains (PDDG) were used for xylanase hydrolysis. The xylose concentration was 19.4 g/L and 68.6% theoretical xylose was hydrolyzed. The cellulose-enriched dry distillers' grains (CDDG) obtained from xylanase hydrolysis were used in SSF for ethanol production. The ethanol concentration was 42.1 g/L and the ethanol productivity was 28.7 g/100 g CDDG. After the experiment, approximately 80.6% of the fermentable sugars in WDG was converted to ethanol.