Type IV pilus genes pilA and pilC of Pseudomonas stutzeri are required for natural genetic transformation, and pilA can be replaced by corresponding genes from nontransformable species

Pseudomonas stutzeri lives in terrestrial and aquatic habitats and is capable of natural genetic transformation. After transposon mutagenesis, transformation-deficient mutants were isolated from a P. stutzeri JM300 strain. In one of them a gene which coded for a protein with 75% amino acid sequence identity to PilC of Pseudomonas aeruginosa, an accessory protein for type IV pilus biogenesis, was inactivated. The presence of type IV pili was demonstrated by susceptibility to the type IV pilus-dependent phage PO4, by occurrence of twitching motility, and by electron microscopy. The pilC mutant had no pili and was defective in twitching motility. Further sequencing revealed that pilC is clustered in an operon with genes homologous to pilB and pilD of P. aeruginosa, which are also involved in pilus formation. Next to these genes but transcribed in the opposite orientation a pilA gene encoding a protein with high amino acid sequence identity to pilin, the structural component of type IV pili, was identified. Insertional inactivation of pilA abolished pilus formation, PO4 plating, twitching motility, and natural transformation. The amounts of (3)H-labeled P. stutzeri DNA that were bound to competent parental cells and taken up were strongly reduced in the pilC and pilA mutants. Remarkably, the cloned pilA genes from nontransformable organisms like Dichelobacter nodosus and the PAK and PAO strains of P. aeruginosa fully restored pilus formation and transformability of the P. stutzeri pilA mutant (along with PO4 plating and twitching motility). It is concluded that the type IV pili of the soil bacterium P. stutzeri function in DNA uptake for transformation and that their role in this process is not confined to the species-specific pilin.     

Products of three accessory genes, pilB, pilC, and pilD, are required for biogenesis of Pseudomonas aeruginosa pili.

The polar pili of Pseudomonas aeruginosa are composed of monomers of the pilin structural subunits. The biogenesis of pili involves the synthesis of pilin precursor, cleavage of a six-amino-acid leader peptide, membrane translocation, and assembly of monomers into a filamentous structure extending from the bacterial surface. This report describes three novel genes necessary for the formation of pili. DNA sequences adjacent to pilA, the pilin structural gene, were cloned and mutagenized with transposon Tn5. Each of the insertions were introduced into the chromosome of P. aeruginosa PAK by gene replacement. The effect of the Tn5 insertions in the bacterial chromosome on pilus assembly was assessed by electron microscopy and sensitivity of mutants to a pilus-specific bacteriophage. The resultant mutants were also tested for synthesis and membrane localization of the pilin antigen in order to define the genes required for maturation, export, and assembly of pilin. A 4.0-kilobase-pair region of DNA adjacent to the pilin structural gene was found to be essential for formation of pili. This region was sequenced and found to contain three open reading frames coding for 62-, 38- to 45-, and 28- to 32-kilodalton proteins (pilB, pilC, and pilD, respectively). Three proteins of similar molecular weight were expressed in Escherichia coli from the 4.0-kilobase-pair fragment flanking pilA with use of a T7 promoter-polymerase expression system. The results of the analyses of the three genes and the implications for pilin assembly and maturation are discussed.     

The Myxococcus xanthuspilT locus is required for social gliding motility although pili are still produced

Social gliding motility in Myxococcus xanthus depends on the presence of Type IV pili. To begin to examine the role of pili in social motility, 17 mutants were identified which had lost social motility, but still expressed pili. Four of these mutants carry point mutations which mapped to a locus upstream of the recently identified pilS , pilR , and pilA genes. Sequencing of this locus revealed a gene with homology to pilT from Pseudomonas aeruginosa . Sequencing of the four point mutations revealed that they occurred within the M. xanthus pilT locus. A markerless deletion within M. xanthus pilT , similar to the four point mutations, disrupted social gliding behaviour but did not interfere with pilus formation or pilus-dependent cell–cell agglutination. Using time-lapse videomicroscopy, residual social motility was observed in dsp ⁻ strains (known to be deficient in fibril but not pilus production); this was not observed in a Δ pilT dsp ⁻ double mutant. Two genes flanking pilT  were also sequenced, and found to have homology to pilB and pilC from P. aeruginosa . Markerless deletions within these genes caused both pilus and social-motility defects. These results indicate that M. xanthus pilB and pilC are required for pilus biogenesis, while pilT is required for assembled pili to play their role in social motility. Thus, pilB , pilT , pilC , pilS , pilR and pilA form a contiguous cluster of pil genes required for social motility.     

Genetic and functional evidence that Type IV pili are required for social gliding motility in Myxococcus xanthus

The social gliding behaviour of Myxococcus xanthus has previously been associated with the presence of polar pili. A Tn 5 transposon insertion was isolated which introduces a defect in social gliding and is genetically linked to a known sgl locus; this insertion was found also to cause a piliation defect. A 2.7 kb section of DNA was isolated from either side of this transposon and sequenced, revealing three genes which encode amino acid sequences with substantial similarity to components of the Type IV pilus biogenesis pathway in Pseudomonas aeruginosa . The myxococcal pilA gene encodes a putative pilin precursor with a short signal sequence and processing site similar to those of other Type IV pilins. Myxococcal pilS and pilR encode amino acid sequences with similarity to PilS and PilR of P. aeruginosa , as well as to other members of the NtrB/C family of two-component regulators. Mutations within pilR and pilA that have no polar effect were demonstrated to be responsible for pilus and social motility defects. These results indicate that the pili of M. xanthus belong to the Type IV family of pili, and demonstrate that these pili are actually required for social motility.     

Cloning of an Aeromonas hydrophila type IV pilus biogenesis gene cluster: complementation of pilus assembly functions and characterization of a type IV leader peptidase/N-methyltransferase required for extracellular protein secretion

Aeromonas hydrophila secretes several extracellular proteins that are associated with virulence including an enterotoxin, a protease, and the hole-forming toxin, aerolysin. These degradative enzymes and toxins are exported by a conserved pathway found in many Gram-negative bacteria. In Pseudomonas aeruginosa this export pathway and type IV pilus biogenesis are dependent on the product of the pilD gene. PilD is a bifunctional enzyme that processes components of the extracellular secretory pathway as well as a type IV prepilin. An A. hydrophila genomic library was transferred into a P. aeruginosa pilD mutant that is defective for type IV pilus biogenesis. The A. hydrophila pilD homologue, tapD , was identified by its ability to complement the pilD mutation in P. aeruginosa . Transconjugants containing tapD were sensitive to the type IV pilus-specific phage, PO4. Sequence data revealed that tapD is part of a cluster of genes ( tapABCD ) that are homologous to P. aeruginosa type IV pilus biogenesis genes ( pilABCD ). We showed that TapB and TapC are functionally homologous to P. aeruginosa PilB and PilC, the first such functional complementation of pilus assembly demonstrated between bacteria that express type IV pili. In vitro studies revealed that TapD has both endopeptidase and N -methyltransferase activities using P. aeruginosa prepilin as substrate. Furthermore, we show that tapD is required for extracellular secretion of aerolysin and protease, indicating that tapD may play an important role in the virulence of A. hydrophila     

The type IV pre-pilin leader peptidase of Xanthomonas campestris pv. campestris is functional without conserved cysteine residues

Type IV pre-pilin leader peptidase was demonstrated to be required for protein secretion, in addition to its involvement in biogenesis of type IV pili. The type IV pre-pilin leader peptidase gene of Xanthomonas campestris pv. campestris was located on a 3 kb Acc l fragment on account of its hybridization with the DNA fragment containing the type IV pre-pilin leader-peptidase gene pilD/xcpA of Pseudomonas aeruginosa . Sequencing of the cloned fragment revealed an open reading frame (ORF) (designated xpsO ) of 287 amino acid residues. A protein with an apparent molecular mass of approximately 32.5 kDa was synthesized in vitro from a DNA fragment containing the xpsO gene. The amino acid sequence shares 50% identity with that of PilD throughout the entire sequence. Among other type IV pre-pilin leader peptidases, XpsO is unique in not having the two conserved -CXXC- motifs in a cytoplasmic domain. Instead, new motifs were noted when the protein was compared with XpsE, which is another member of the extracellular protein-secretion machinery. When the xpsO gene was introduced into the pilD mutant of P. aeruginosa , both the sensitivity against infection with the pilus-specific phage PO4 and the ability to secrete extracellular protein were recovered. Furthermore, immunoblot analysis indicated that the P. aeruginosa pilin was apparently processed in vivo by the xpsO gene product.     

Protein secretion in Pseudomonas aeruginosa: characterization of seven xcp genes and processing of secretory apparatus components by prepilin peptidase

The xcp genes are required for the secretion of most extracellular proteins by Pseudomonas aeruginosa. The products of these genes are essential for the transport of exoproteins across the outer membrane after they have reached the periplasm via a signal sequence-dependent pathway. To date, analysis of three xcp genes has suggested the conservation of this secretion pathway in many Gram-negative bacteria. Furthermore, the xcpA gene was shown to be identical to pilD, which encodes a peptidase involved in the processing of fimbrial (pili) subunits, suggesting a connection between pili biogenesis and protein secretion. Here the nucleotide sequences of seven other xcp genes, designated xcpR to -X, are presented. The N-termini of four of the encoded Xcp proteins display similarity to the N-termini of type IV pili, suggesting that XcpA is involved in the processing of these Xcp proteins. This could indeed be demonstrated in vivo. Furthermore, two other proteins, XcpR and XcpS, show similarity to the PilB and PilC proteins required for fimbriae assembly. Since XcpR and PilB display a canonical nucleotide-binding site, ATP hydrolysis may provide energy for both systems.     

An enzyme with type IV prepilin peptidase activity is required to process components of the general extracellular protein secretion pathway of Klebsiella oxytoca

The last gene (pulO) of the pulC-O pullulanase secretion gene operon of Klebsiella oxytoca codes for a protein that is 52% identical to the product of the pilD/xcpA gene required for extracellular protein secretion and type IV pilus biogenesis in Pseudomonas aeruginosa. The PilD/XcpA protein is known to remove the first six amino acids of the signal sequence of the type IV pilin precursor by cleaving after the glycine residue in the conserved sequence GF(M)XXXE (where X represents hydrophobic amino acids). This prepilin peptidase cleavage site is present in the products of four genes in the pulC-O operon (PulG, PulH, Pull and PulJ proteins). It is shown here that PulO processes the pulG gene product in vivo. Processing was maximal within 15 seconds, but experiments in which the expression of pulO was uncoupled from that of the other genes in the secretion operon suggest that processing can also occur post-translationally. The products of two pulG derivatives with internal inframe deletions were also processed by PulO, but the three PulG-PhoA hybrids, two PulJ-PhoA hybrids and the single PulH-PhoA hybrid tested did not appear to be processed. Sucrose gradient fraction experiments showed that both precursor and mature forms of PulG appear to be associated with low-density, outer membrane vesicles prepared by osmotic lysis of sphaeroplasts. Neither the xcpA gene nor the Bacillus subtilis gene comC, which is also homologous to pulO and codes for a protein with type IV prepilin peptidase activity, can correct the pullulanase secretion defect in an Escherichia coli strain carrying all of the genes required for secretion except pulO. Furthermore, neither XcpA nor ComC is able to process prePulG protein in vivo.     

Role of type IV pili in virulence of Pseudomonas syringae pv. tabaci 6605: correlation of motility, multidrug resistance, and HR-inducing activity on a nonhost plant

To investigate the role of type IV pili in the virulence of phytopathogenic bacteria, four mutant strains for pilus biogenesis-related genes were generated in Pseudomonas syringae pv. tabaci 6605. PilA encodes the pilin protein as a major subunit of type IV pili, and the pilO product is reported to be required for pilus assembly. The fimU and fimT genes are predicted to produce minor pilins. Western blot analysis revealed that pilA, pilO, and fimU mutants but not the fimT mutant failed to construct type IV pili. Although the swimming motility of all mutant strains was not impaired in liquid medium, they showed remarkably reduced motilities on semisolid agar medium, suggesting that type IV pili are required for surface motilities. Virulence toward host tobacco plants and hypersensitive response-inducing ability in nonhost Arabidopsis leaves of pilA, pilO, and fimU mutant strains were reduced. These results might be a consequence of reduced expression of type III secretion system-related genes in the mutant strains. Further, all mutant strains showed enhanced expression of resistance-nodulation-division family members mexA, mexB, and oprM, and higher tolerance to antimicrobial compounds. These results indicate that type IV pili are an important virulence factor of this pathogen.     

Expression of multiple types of N-methyl Phe pili in Pseudomonas aeruginosa

The nature of pili synthesized by Pseudomonas aeruginosa when plasmid-borne genes of homologous pilins from Bacteroides nodosus are introduced as thermoregulated expression systems has been ascertained. Expression of B. nodosus pili inhibited the production of indigenous P. aeruginosa pili, and an organism harbouring pilin genes from two strains of B. nodosus produced two serologically distinct populations of pili on each cell. Simultaneous production of both indigenous and foreign pili was achieved by partial induction of expression. Homogeneity in pilus structure suggests either that there is an exclusive specificity of interaction between identical pilin subunits in pilus assembly, or that each pilus is produced from the translation products of a single messenger RNA molecule, with translation and pilus assembly closely coupled.     

Multiple roles of the pilus biogenesis protein pilD: involvement of pilD in excretion of enzymes from Pseudomonas aeruginosa.

In Pseudomonas aeruginosa, the genes pilB, pilC, and pilD encode proteins necessary for posttranslational modification and assembly of pilin monomers into pilus organelles (D. Nunn, S. Bergman, and S. Lory, J. Bacteriol. 172:2911-2919, 1990). We show that PilD, encoding a putative pilin-specific leader peptidase, also controls export of alkaline phosphatase, phospholipase C, elastase, and exotoxin A. pilD mutants accumulate these proteins in the periplasmic space, while secretion of periplasmic and outer membrane proteins appears to be normal. The periplasmic form of exotoxin A was fully mature in size, contained all cysteines in disulfide bonds, and was toxic in a tissue culture cytotoxicity assay, suggesting that in pilD mutants, exotoxin A was folded into its native conformation. The function of the other two accessory proteins, PilB and PilC, appears to be restricted to pilus biogenesis, and strains carrying mutations in their respective genes do not show an export defect. These studies show that in addition to cleaving the leader sequence from prepilin, PilD has an additional role in secretion of proteins that are released from P. aeruginosa into the surrounding media. PilD most likely functions as a protease that is involved in processing and assembly of one or more components of the membrane machinery necessary for the later stages of protein extracellular localization.     

An Aeromonas salmonicida type IV pilin is required for virulence in rainbow trout Oncorhynchus mykiss

Aeromonas salmonicida expresses a large number of proven and suspected virulence factors including bacterial surface proteins, extracellular degradative enzymes, and toxins. We report the isolation and characterization of a 4-gene cluster, tapABCD, from virulent A. salmonicida A450 that encodes proteins homologous to components required for type IV pilus biogenesis. One gene, tapA, encodes a protein with high homology to type IV pilus subunit proteins from many gram-negative bacterial pathogens, including Aeromonas hydrophila, Pseudomonas aeruginosa, and Vibrio vulnificus. A survey of A. salmonicida isolates from a variety of sources shows that the tapA gene is as ubiquitous in this species as it is in other members of the Aeromonads. Immunoblotting experiments demonstrate that it is expressed in vitro and is antigenically conserved among the A. salmonicida strains tested. A mutant A. salmonicida strain defective in expression of TapA was constructed by allelic exchange and found to be slightly less pathogenic for juvenile Oncorhynchus mykiss (rainbow trout) than wild type when delivered by intraperitoneal injection. In addition, fish initially challenged with a high dose of wild type were slightly more resistant to rechallenge with wild type than those initially challenged with the tapA mutant strain, suggesting that presence of TapA contributes to immunity. Two of the other three genes identified, tapB and tapC, encode proteins with homology to factors known to be required for type IV pilus assembly in P. aeruginosa, but in an as yet unidentified manner. TapB is a member of the ABC-transporter family of proteins that contain characteristic nucleotide-binding regions, and which may provide energy for type IV pilus assembly through the hydrolysis of ATP. TapC homologs are integral cytoplasmic membrane proteins that may play a role in pilus anchoring or initiation of assembly. The fourth gene, tapD, encodes a product that shares homology with a family of proteins with a known biochemical function, namely, the type IV prepilin leader peptidases. These bifunctional enzymes proteolytically cleave the leader peptide from the pilin precursor (prepilin) and then N-methylate the newly exposed N-terminal amino acid prior to assembly of the subunits into the pilus structure. We demonstrate that A. salmonicida TapD is able to restore type IV pilus assembly and type II secretion in a P. aeruginosa strain carrying a mutation in its type IV peptidase gene, suggesting that it plays the same role in A. salmonicida.     

Type IV pili are involved in plant–microbe and fungus–microbe interactions

Adherence of bacteria to eukaryotic cells is essential for the initiation of infection in many animal and human pathogens, e.g. Neisseria gonorrhoeae and Pseudomonas aeruginosa . Adhesion-mediating type IV pili, filamentous surface appendages formed by pilin subunits, are crucial virulence factors. Here, we report that type IV pilus-dependent adhesion is also involved in plant–bacteria and fungus–bacteria interactions. Nitrogen-fixing, endophytic bacteria, Azoarcus sp., can infect the roots of rice and spread systemically into the shoot without causing symptoms of plant disease. Formation of pili on solid media was dependent on the pilAB locus. PilA encodes an unusually short (6.4 kDa) putative pilin precursor showing 100% homology to the conserved N-terminus of the Pseudomonas aeruginosa type IV pilin. PilB encodes for a 14.2 kDa polypeptide showing similarity to FimF, a component of type I fimbriae of Escherichia coli . It was found to be extruded beyond the cell surface by immunofluorescence studies, and it may, therefore, be part of a pilus assembly complex or the pilus itself. Both genes are involved in the establishment of bacteria on the root surface of rice seedlings, as detected by fluorescence microscopy. Moreover, both genes are necessary for bacterial adhesion to the mycelium of an ascomycete, which was isolated from the same rhizosphere as the bacteria. In co-culture with the fungus, Azoarcus sp. forms complex intracytoplasmic membranes, diazosomes, which are related to efficient nitrogen fixation. Adhesion to the mycelium appears to be crucial for this process, as diazosomes were absent and nitrogen fixation rates were decreased in pilAB mutants in co-culture.     

Characterization of a complex chemosensory signal transduction system which controls twitching motility in Pseudomonas aeruginosa

Virulence of the opportunistic pathogen Pseudomonas aeruginosa involves the coordinate expression of a wide range of virulence factors including type IV pili which are required for colonization of host tissues and are associated with a form of surface translocation termed twitching motility. Twitching motility in P. aeruginosa is controlled by a complex signal transduction pathway which shares many modules in common with chemosensory systems controlling flagella rotation in bacteria and which is composed, in part, of the previously described proteins PilG, PilH, PilI, PilJ and PilK. Here we describe another three components of this pathway: ChpA, ChpB and ChpC, as well as two downstream genes, ChpD and ChpE, which may also be involved. The central component of the pathway, ChpA, possesses nine potential sites of phosphorylation: six histidine-containing phosphotransfer (HPt) domains, two novel serine- and threonine-containing phosphotransfer (SPt, TPt) domains and a CheY-like receiver domain at its C-terminus, and as such represents one of the most complex signalling proteins yet described in nature. We show that the Chp chemosensory system controls twitching motility and type IV pili biogenesis through control of pili assembly and/or retraction as well as expression of the pilin subunit gene pilA. The Chp system is also required for full virulence in a mouse model of acute pneumonia.     

Pilus formation and protein secretion by the same machinery in Escherichia coli

The secreton (type II secretion) and type IV pilus biogenesis branches of the general secretory pathway in Gram-negative bacteria share many features that suggest a common evolutionary origin. Five components of the secreton, the pseudopilins, are similar to subunits of type IV pili. Here, we report that when the 15 genes encoding the pullulanase secreton of Klebsiella oxytoca were expressed on a high copy number plasmid in Escherichia coli, one pseudopilin, PulG, was assembled into pilus-like bundles. Assembly of the 'secreton pilus' required most but not all of the secreton components that are essential for pullulanase secretion, including some with no known homologues in type IV piliation machineries. Two other pseudopilins, pullulanase and two outer membrane-associated secreton components were not associated with pili. Thus, PulG is probably the major component of the pilus. Expression of a type IV pilin gene, the E.coli K-12 gene ppdD, led to secreton-dependent incorporation of PpdD pilin into pili without diminishing pullulanase secretion. This is the first demonstration that pseudopilins can be assembled into pilus-like structures.