Microwave pretreatment of lignocellulosic material in cholinium ionic liquid for efficient enzymatic saccharification

We demonstrated that the enzymatic hydrolysis of cellulose after microwave pretreatment of lignocellulosic material in ionic liquids (ILs) is drastically enhanced compared with that after conventional thermal pretreatment in ILs. Three types of cholinium ILs, choline formate (ChFor), choline acetate (ChOAc), and choline propionate (ChPro), were examined. The cellulose saccharification percentage was approximately 20% for kenaf powders pretreated in ChFor, ChOAc, and ChPro by conventional heating at 110 °C for 20 min. In contrast, approximately 60–90% of cellulose was hydrolyzed to glucose after microwave pretreatment in the same ILs at 110 °C for 20 min.     

Structural comparison and enhanced enzymatic hydrolysis of eucalyptus cellulose via pretreatment with different ionic liquids and catalysts

Eucalyptus was fractionated with mild alkaline process, and the obtained cellulose fraction was pretreated with various ionic liquids (ILs) to enhance the enzymatic saccharification. The results showed that the ILs used was efficient for the hydrolysis of cellulose, with the maximum total reducing sugars (TRS) yield over 80% at 50 °C. The regenerated cellulose substrate exhibited a significant improvement about 4.4–6.4 folds enhancement on saccharification rate during the first 4 h reaction. The crystallinity index (CrI) of cellulose via 1-ally-3-methylimidazolium ([AMIM]Cl) pretreatment was significantly decreased from 70.2% to 31.2%, resulting in structural change from cellulose I to cellulose II, which enabled the cellulase enzymes easier access to hydrolyze cellulose. However, 1-butyl-3methylimidazolium acesulfamate ([BMIM]Ace) pretreatment had no large effect on the CrI although a high conversion yield in glucose was obtained. The surface morphologies of the regenerated substrate which was pretreated via 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) and 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac) showed more porous and incompact network of cellulose when compared with the untreated substrate. This result indicated a better accessibility by cellulases to the cellulose surface. Besides, a certain amount of catalysts such as MgCl₂ and H₂SO₄ could improve the rate of enzymatic saccharification.     

Short time ionic liquids pretreatment on lignocellulosic biomass to enhance enzymatic saccharification

The potential of 1-buthyl-3-methylpyridinium chloride, [Bmpy][Cl], as a pretreatment solvent for lignocellulosic biomasses, Bagasse and Eucalyptus, was investigated. The yields of regenerated biomasses ranged between 35% and 96%, and varied according to the pretreatment time, type of ionic liquid (IL) and biomass. The pretreatment of the biomass with [Bmpy][Cl] resulted in up to 8-fold increase in the cellulose conversion when compared with the untreated biomass. For a short pretreatment period (i.e., 10 min), [Bmpy][Cl] showed better performance than 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) with respect to the initial enzymatic saccharification rates. The increase in the reaction rates with [Emim][OAc] treatment was because of a reduction in the cellulose crystallinity. In contrast, a decrease in the crystallinity index was not clearly observed for the biomass pretreated with [Bmpy][Cl], and the enhancement of the enzymatic saccharification rates using this IL is presumably due to a reduction in the degree of polymerization of cellulose in the biomass.     

Compatible ionic liquid-cellulases system for hydrolysis of lignocellulosic biomass

Ionic liquids (ILs) have been increasingly recognized as novel solvents for dissolution and pretreatment of cellulose. However, cellulases are inactivated in the presence of ILs, even when present at low concentrations. To more fully exploit the benefits of ILs it is critical to develop a compatible IL‐cellulases system in which the IL is able to effectively solubilize and activate the lignocellulosic biomass, and the cellulases possess high stability and activity. In this study, we investigated the stability and activity of a commercially available cellulases mixture in the presence of different concentrations of 1‐ethyl‐3‐methylimidazolium acetate ([Emim][OAc]). A mixture of cellulases and β‐glucosidase (Celluclast1.5L, from Trichoderma reesei, and Novozyme188, from Aspergillus niger, respectively) retained 77% and 65% of its original activity after being pre‐incubated in 15% and 20% (w/v) IL solutions, respectively, at 50°C for 3 h. The cellulases mixture also retained high activity in 15% [Emim][OAc] to hydrolyze Avicel, a model substrate for cellulose analysis, with conversion efficiency of approximately 91%. Notably, the presence of different amounts of yellow poplar lignin did not interfere significantly with the enzymatic hydrolysis of Avicel. Using this IL‐cellulase system (15% [Emim][OAc]), the saccharification of yellow poplar biomass was also significantly improved (33%) compared to the untreated control (3%) during the first hour of enzymatic hydrolysis. Together, these findings provide compelling evidence that [Emim][OAc] was compatible with the cellulase mixture, and this compatible IL‐cellulases system is promising for efficient activation and hydrolysis of native biomass to produce biofuels and co‐products from the individual biomass components. Bioeng. 2011; 108:1042–1048. © 2010 Wiley Periodicals, Inc.     

Effect of ionic liquids,organic solvents and supercritical CO2 pretreatment on the conformation and catalytic properties of Candida rugosa lipase

The objective of this work is to assess the structure and activity of Candida rugosa lipase (CRL) pretreated with seventeen ionic liquids (ILs), five organic solvents and super-critical carbon dioxide (SC-CO₂). The results revealed that anion selection of ILs showed generally much greater effects on CRL esterification activity than cation choice, and CRL pretreated by ILs with strong water miscible properties showed very low esterification activity. The highest CRL activity treated with ILs [Hmim][PF6] was obtained with the value of 45078.0 U/g-protein. Furthermore, the CRL activities pretreated with five conventional organic solvents were also examined and the values increased with the log P decrease of organic solvents when log P was lower than 2.0. Finally, the CRL activities were respectively 1.2- and 1.3-fold higher over the untreated ones after pretreatment with sub- and super-critical CO₂ under the pressures of 6 MPa and 15 MPa at 40 °C for 20 min. Further analyses via FT-IR demonstrated that the high activity of CRL pretreated with ILs, organic solvents and SC-CO₂ was probably caused by the changes of CRL secondary structure. In conclusion, the results in this work will be helpful for us to choose the suitable reaction medium in CRL biocatalysis and biotransformation reactions.     

Improving the catalytic performance of porcine pancreatic lipase in the presence of [MMIm][MeSO4] with the modification of functional ionic liquids

Porcine pancreatic lipase (PPL) was chemically modified with various functional ionic liquids (ILs) to increase its catalytic performance in water-miscible IL. Catalytic activity and thermostability were tested with a p-nitrophenyl palmitate (pNPP) hydrolysis reaction. The native enzyme lost 18% of its initial activity in 0.4 M [MMIm][MeSO₄], whereas the activities of all the modified enzymes increased. The [HOOCBMIm][Cl] modification led to a 2-fold increase in activity in 0.3 M [MMIm][MeSO₄] than in aqueous. All the modified enzymes exhibited higher thermostability compared with the native enzyme at high temperature. In particular, the [HOOCBMIm][Cl] modification led to a 6-fold increase in thermostability at 60 °C. Conformational changes were confirmed by fluorescence spectroscopy and circular dichroism spectroscopy to elucidate the mechanism of catalytic performance alteration.     

Catalytic activity of α-chymotrypsin in enzymatic peptide synthesis in ionic liquids

The catalytic activity of α-chymotrypsin in the enzymatic peptide synthesis of N-acetyl-l-tryptophan ethyl ester with glycyl glycinamide was examined in ionic liquids and organic solvents. The water content in 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([emim][FSI]) affected the initial rates of peptide synthesis and hydrolysis. The activity of α-chymotrypsin was influenced by a kind of anions consisting of the same cation, [emim], when an ionic liquid was used as a solvent. The initial rate of peptide synthesis was improved 16-fold by changing from an organic solvent, acetonitrile, to an ionic liquid, [emim][FSI], at 25 °C. The activity of α-chymotrypsin in the peptide synthesis in [emim][FSI] was 17 times greater than that in acetonitrile at 60 °C, although the activity of α-chymotrypsin in the peptide synthesis gradually decreased with an increase in reaction temperature in [emim][FSI], similar to organic solvents. Moreover, α-chymotrypsin exhibited activity in [emim][FSI] and [emim][PF₆] at 80 °C.     

Chemical modifications by ionic liquid-inspired cations improve the activity and the stability of formate dehydrogenase in [MMIm][Me2PO4]

The formate dehydrogenase (FDH, EC: 1.2. 1.2) from Candida boidinii was found to be inactivated and unstable in the presence of high concentration (>50%) of the water soluble dimethylimidazolium dimethyl phosphate ([MMIm][Me₂PO₄]) ionic liquid. In order to circumvent this problem, the enzyme was chemically modified by cations usually present in ionic liquids: cholinium (1), hydroxyethyl-methylimidazolium (2) and hydroxypropyl-methylimidazolium (3) cations were activated with carbonyldiimidazole before being reacted with the FDH leading to a heterogeneous population of 6–7 biocatalysts. FDH modified by (1) or (3) led to 3–9 modifications while FDH modified by (2) led to 6 proteins presenting 7–12 grafted cations. Specific activity of the modified enzymes was decreased by a 2.5–3-fold factor (0.10–0.15 μmol min⁻¹ mg⁻¹) compared to the non-modified FDH (0.33 μmol min⁻¹ mg⁻¹) when assayed in carbonate buffer (pH 9.7, 25 mM). After modification, the FDH still present 0.06 μmol min⁻¹ mg⁻¹ in 70% [MMIm][Me₂PO₄] (v:v) (30–45% of their activity in aqueous buffer) while the native enzyme is inactive at this ionic liquid concentration, proving the efficiency of this strategy. The half-life of the modified enzyme is also increased by a 5-fold factor after modification by (1) (t_1/2 of 9 days) and by a 3-fold factor after modification by (2) or (3) (t_1/2 of 6 and 5 days respectively) in aqueous solution. When stored in 37.5% [MMIm][Me₂PO₄] (v:v), both modified and unmodified FDH have an increased half-life (t_1/2 of 6–9 days). This grafting strategy is found to be good methods to mimic and study the stabilizing effect of ionic liquids on enzymes.     

Diverse magnetic and electrical properties of molecular solids containing the thiazyl radical BDTA

We have examined the crystal structures and the electrical and magnetic properties of the molecular compounds of a thiazyl radical, 1,3,2-benzodithiazolyl (abbreviated as BDTA). BDTA was found to be a useful building block for molecular conductors and magnets because it can operate as a counter cation, a donor or a ligand, depending on its charge. (i) A charge-transfer complex, [BDTA][TCNQ], crystallizes into a uniform segregated stacking structure with a short contact between the donor and acceptor columns. In spite of the partial charge transfer between the two components, this complex exhibits semiconductive behaviour, probably due to a large electron correlation on BDTA. (ii) The crystal structure of [BDTA][Ni(mnt)₂] (mnt = maleonitriledithiolate) consists of alternating stacking columns of S = 0 [BDTA]⁺ and S = 1/2 [Ni(mnt)₂]^?, in which a ferromagnetic coupling operates between the [Ni(mnt)₂]^? anions through the [BDTA] ⁺ cation. (iii) [BDTA]₂[Cu(mnt)₂] consists of an alternating stack of a head-to-head [BDTA]⁺ dimer and a planar [Cu(mnt)₂]^2? dianion. Short intermolecular S?S contacts between the stacks give rise to an ideal 1D Heisenberg antiferromagnetic chain of [Cu(mnt)₂]^2? with a coupling constant of J/k_B = 16–17 K. (iv) The crystal structure of [BDTA]₂[Co(mnt)₂] is similar to that of [BDTA]₂[Cu(mnt)₂] at 253 K, but this salt undergoes a phase transition at 190 K, below which a partial electron transfer occurs from [Co(mnt)₂]^2? to one of the [BDTA]⁺ cations along with formation of a coordination bond. (v) [BDTA][Ni(dmit)₂]₂ (dmit = 1,3-dithiol-2-thione-4,5-dithiolate) exhibits room-temperature conductivity of 0.1 S cm^?1 and semiconductive behaviour over the range 80–200 K, which can be interpreted in terms of multi-conducting bands.     

Efficient pretreatment of lignocellulose in ionic liquids/co-solvent for enzymatic hydrolysis enhancement into fermentable sugars

Ionic liquids (ILs) have been widely used as alternative solvents for biomass pretreatment, however, efficient methods that enable economically use of ILs at large scale have not been established. In this study, a new method in which ILs and polar organic solvents (ILs/co-solvent systems) was proposed for efficient pretreatment of lignocellulosic materials. The combination use of appropriate ILs and organic co-solvents can significantly enhance the solubility of lignocellulose due to the lower viscosity of ILs/co-solvent mixture as compared to those of pure ILs while the hydrogen bond basicity was maintained. In addition, the solubility of lignocellulosic materials in ILs/co-solvent system was found to be correlated with the Kamlet-Taft solvent parameters. Moreover, the use of microwave heating also enhances the efficiency of lignocellulose pretreatment. For example, the microwave-assisted [Emim][OAc]-DMSO (1:1 volume ratio) treated-rice straw could be hydrolyzed at least 22 times faster than that of untreated-rice straw by cellulase from Trichoderma reesei. This enhancement was attributed by several factors including more efficient lignin extraction, less crystalline cellulose and lower residual ILs in treated-rice straw. The produced sugars can be effectively fermented by Pichia stipitis for ethanol production. Moreover, [Emim][OAc]-DMSO mixture could be reused at least 5 times without significantly decrease in effectiveness demonstrated that the use of ILs/co-solvent was potential alternative method for large-scale biomass pretreatment.     

Mechanistic insights into the effect of imidazolium ionic liquid on lipid production by <Emphasis Type="Italic">Geotrichum fermentans</Emphasis>

Background

Ionic liquid (IL) pretreatment has emerged as a promising technique that enables complete utilization of lignocellulosic biomass for biofuel production. However, imidazolium IL has recently been shown to exhibit inhibitory effect on cell growth and product formation of industrial microbes, such as oleaginous microorganisms. To date, the mechanism of this inhibition remains largely unknown.

Results

In this study, the feasibility of [Bmim][OAc]-pretreated rice straw hydrolysate as a substrate for microbial lipid production by Geotrichum fermentans, also known as Trichosporon fermentans, was evaluated. The residual [Bmim][OAc] present in the hydrolysate caused a reduction in biomass and lipid content (43.6 and 28.1%, respectively) of G. fermentans, compared with those of the control (7.8 g/L and 52.6%, respectively). Seven imidazolium ILs, [Emim][DEP], [Emim]Cl, [Amim]Cl, [Bmim]Cl, [Bzmim]Cl, [Emim][OAc], and [Bmim][OAc], capable of efficient pretreatment of lignocellulosic biomass were tested for their effects on the cell growth and lipid accumulation of G. fermentans to better understand the impact of imidazolium IL on the lipid production. All the ILs tested inhibited the cell growth and lipid accumulation. In addition, both the cation and the anion of IL contributed to IL toxicity. The side chain of IL cations showed a clear impact on toxicity. On examining IL anions, [OAc]^? was found to be more toxic than those of [DEP]^? and Cl^?. IL exhibited its toxicity by inhibiting sugar consumption and key enzyme (malic enzyme and ATP-citrate lyase) activities of G. fermentans. Cell membrane permeability was also altered to different extents in the presence of various ILs. Scanning electron microscopy revealed that IL induces fibrous structure on the surface of G. fermentans cell, which might represent an adaptive mechanism of the yeast to IL.

Conclusions

This work gives some mechanistic insights into the impact of imidazolium IL on the cell growth and lipid accumulation of oleaginous yeast, which is important for IL integration in lignocellulosic biofuel production, especially for microbial lipid production.

     

Isoamyl acetate synthesis in imidazolium-based ionic liquids using packed bed enzyme microreactor

The acylation of isoamyl alcohol with acetic anhydride catalyzed by immobilized Candida antarctica lipase B was studied in ionic liquids (ILs) based on quaternary imidazolium cations with alkyl, alkenyl, alkynyl, benzyl, alkoxyl or N-aminopropyl side chains. Among the tested ILs, the highest enzyme activity together with the highest isoamyl acetate yield were obtained in [C₇mmim][Tf₂N]. No loss of lipase B activity was observed during one-month incubation in this hydrophobic IL without the presence of substrates. Isoamyl acetate synthesis using [C₇mmim][Tf₂N] as solvent was further studied in a continuously operated miniaturized enzymatic packed bed reactor at various flow rates and temperatures. Up to 92% isoamyl acetate yield could be obtained within 15 min by using 0.5 M acetic anhydride and 1.5 M isoamyl alcohol inlet concentrations at 55 °C, corresponding to the volumetric productivity of 61 mmol l^?1 min^?1, which to the best of our knowledge is the highest reported so far for this reaction. No decrease in productivity was experienced during the subsequent runs of continuous microbioreactor operation performed within 14 consecutive days. The benefits of reactor miniaturization along with the green solvent application were therefore successfully exploited for the development of a sustainable flavour ester production.     

Effects of cholinium-based ionic liquids on Aspergillus niger lipase: Stabilizers or inhibitors

Lipases are well-known biocatalysts used in several industrial processes/applications. Thus, as with other enzymes, changes in their surrounding environment and/or their thermodynamic parameters can induce structural changes that can increase, decrease, or even inhibit their catalytic activity. The use of ionic compounds as solvents or additives is a common approach for adjusting reaction conditions and, consequently, for controlling the biocatalytic activity of enzymes. Herein, to elucidate the effects of ionic compounds on the structure of lipase, the stability and enzymatic activity of lipase from Aspergillus niger in aqueous solutions (at 0.05, 0.10, 0.50, and 1.00 M) of six cholinium-based ionic liquids (cholinium chloride [Ch]Cl; cholinium acetate ([Ch][Ac]); cholinium propanoate ([Ch][Prop]); cholinium butanoate ([Ch][But]); cholinium pentanoate ([Ch][Pent]); and cholinium hexanoate ([Ch][Hex])) were evaluated over 24 hr. The enzymatic activity of lipase was maintained or enhanced in the lower concentrations of all the [Ch]⁺-ILs (below 0.1 M). [Ch][Ac] maintained the biocatalytic behavior of lipase, independent of the IL concentration and incubation time. However, above 0.1 M, [Ch][Pent] and [Ch][Hex] caused complete inhibition of the catalytic activity of the enzyme, demonstrating that the increase in the anionic alkyl chain length strongly affected the conformation of the lipase. The hydrophobicity and concentration of the [Ch]⁺-ILs play an important role in the enzyme activity, and these parameters can be controlled by adjusting the anionic alkyl chain length. The inhibitory effects of [Ch][Pent] and [Ch][Hex] may be of great interest to the pharmaceutical industry to induce pharmacological inhibition of gastric and pancreatic lipases.     

Lipase-catalyzed acylation of lily polysaccharide in ionic liquid-containing systems

A comparative study was made of immobilized Burkholderia cepacia lipase (PSL-C)-catalyzed acylation of lily polysaccharide (LP) with vinyl acetate in organic solvents, ionic liquids (ILs) and IL-containing systems. The degree of substitution (DS) of the modified LP was used to evaluate the extent of acylation and thus enzymatic activity. In this manner, an eco-friendly solvent, 2-methyltetrahydrofuran (MeTHF), was found to be the most suitable organic reaction medium. However, compared to MeTHF, enhanced enzyme activity was observed when 1-butyl-3-methylimidazolium tetrafluorobrate ([C₄MIm][BF₄]) was used as the solvent. To further enhance the DS of the modified LP product, co-solvent mixtures of [C₄MIm][BF₄] and MeTHF were investigated. Among the various MeTHF–[C₄MIm][BF₄] systems examined, 20% (v/v) MeTHF–[C₄MIm][BF₄] produced the highest DS. In this reaction medium, the optimal water activity, reaction temperature and time were 0.33, 55 °C and 18 h, respectively, producing a product DS as high as 0.67. The PSL-C enzyme exhibited a much higher stability in the IL-containing system. Additionally, PSL-C-catalyzed acylation of LP was highly regioselective, causing acylation of only C6OH.     

Novel renewable ionic liquids as highly effective solvents for pretreatment of rice straw biomass by selective removal of lignin

Cholinium amino acids ionic liquids ([Ch][AA] ILs), a novel type of bio‐ILs that can easily be prepared from renewable biomaterials, were investigated for pretreatment of rice straw by selective extraction of lignin from this abundant lignocellulosic biomass material. Of the eight ILs examined, most were demonstrated to be excellent pretreatment solvents. Upon pretreatment using these ILs, the initial saccharification rates of rice straw residues were substantially improved as well as the extent to which polysaccharides could be digested (>90% for cellulose and >60% for xylan). Enzymatic hydrolysis of pretreated rice straw by Trichoderma reesei cellulase/xylanase furnished glucose and xylose with the yields in excess of 80% and 30%, respectively. Detailed spectroscopic characterization showed that the enhancement of polysaccharides degestibility derived mainly from delignification rather than changes in cellulose crystallinity. The yields of fermentable reducing sugars were significantly improved after individual optimization of pretreatment temperature and duration. With [Ch][Lys] as the solvent, the sugar yields of 84.0% for glucose and 42.1% for xylose were achieved after pretreatment at 90°C for 5 h. The IL [Ch][Lys] showed excellent reusability across five successive batches in pretreatment of rice straw. These bio‐ILs performed as well as or better than previously investigated non‐renewable ILs, and thus present a new and environmentally friendly way to pretreat lignocellulose for production of fermentable sugars and total utilization of the biomass. Biotechnol. Bioeng. 2012; 109: 2484–2493. © 2012 Wiley Periodicals, Inc.     

Evaluation of Toxicity and Biodegradability of Cholinium Amino Acids Ionic Liquids

Cholinium amino acid ionic liquids ([Ch][AA] ILs), which are wholly composed of renewable biomaterials, have recently been demonstrated to have very promising properties for applications in organic synthesis and biomass pretreatment. In this work, the toxicity of these ILs toward enzymes and bacteria was assessed, and the effect of the anion on these properties is discussed. The inhibitory potentials of this type of ILs to acetylcholinesterase were weaker approximately an order of magnitude than the traditional IL 1-butyl-3-methylimidazolium tetrafluoroborate. Additionally, the [Ch][AA] ILs displayed low toxicity toward the bacteria tested. Furthermore, the biodegradability of the [Ch][AA] ILs was evaluated via the closed bottle and CO₂ headspace tests using wastewater microorganisms. All the ILs were classified as ‘readily biodegradable’ based on their high levels of mineralization (62-87%). The presence of extra carboxyl or amide groups on the amino acid side chain rendered the ILs significantly more susceptible to microbial breakdown. In addition, for most of the [Ch][AA] ILs, low toxicity correlated with good biodegradability. The low toxicity and high biodegradability of these novel [Ch][AA] make them promising candidates for use as environmentally friendly solvents in large-scale applications.     

Radiosynthesis of N-(4-chloro-3-[11C]methoxyphenyl)-2-picolinamide ([11C]ML128) as a PET radiotracer for metabotropic glutamate receptor subtype 4 (mGlu4)

N-(Chloro-3-methoxyphenyl)-2-picolinamide (3, ML128, VU0361737) is an mGlu₄ positive allosteric modulator (PAM), which is potent and centrally penetrating. 3 is also the first mGlu₄ PAM to show efficacy in a preclinical Parkinson disease model upon systemic dosing. As a noninvasive medical imaging technique and a powerful tool in neurological research, positron emission tomography (PET) offers a possibility to investigate mGlu₄ expression in vivo under physiologic and pathological conditions. We synthesized a carbon-11 labeled ML128 ([¹¹C]3) as a PET radiotracer for mGlu₄, and characterized its biological properties in Sprague Dawley rats. [¹¹C]3 was synthesized from N-(4-chloro-3-hydroxyphenyl)-2-picolinamide (2) using [¹¹C]CH₃I. Total synthesis time was 38 ± 2.2 min (n = 7) from the end of bombardment to the formulation. The radioligand [¹¹C]3 was obtained in 27.7 ± 5.3% (n = 5) decay corrected radiochemical yield based on the radioactivity of [¹¹C]CO₂. The radiochemical purity of [¹¹C]3 was >99%. Specific activity was 188.7 ± 88.8 GBq/mol (n = 4) at the end of synthesis (EOS).PET images were conducted in 20 normal male Sprague Dawley rats including 11 control studies, 6 studies blocking with an mGlu₄ modulator (4) to investigate specificity and 3 studies blocking with an mGlu₅ modulator (MTEP) to investigate selectivity. These studies showed fast accumulation of [¹¹C]3 (peak activity between 1–3 min) in several brain areas including striatum, thalamus, hippocampus, cerebellum, and olfactory bulb following with fast washout. Blocking studies with the mGlu₄ modulator 4 showed 22–28% decrease of [¹¹C]3 accumulation while studies of selectivity showed only minor decrease supporting good selectivity over mGlu₅. Biodistribution studies and blood analyses support fast metabolism. Altogether this is the first PET imaging ligand for mGlu₄, in which the labeled ML128 was used for imaging its in vivo distribution and pharmacokinetics in brain.     

Biosynthesis of glycyrrhetic acid 3-O-mono-β-d-glucuronide catalyzed by β-d-glucuronidase with enhanced bond selectivity in an ionic liquid/buffer biphasic system

The bond selective hydrolysis of glycyrrhizin (GL) to glycyrrhetic acid 3-O-mono-β-d-glucuronide (GAMG) catalyzed by recombinant β-d-glucuronidase from Escherichia coli BL21 (PGUS-E) was successfully performed in an ionic liquid (IL)/buffer biphasic system. Five ILs were analyzed, however, a hydrophobic IL 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM]PF₆) showed the best biocompatibility with PGUS-E. An obvious enhancement in the initial reaction rate, substrate conversion, GAMG yield and chemical bond selectivity (S_cb) was observed using 40% (v/v) [BMIM]PF₆/buffer as the reaction medium when compared to the acetate buffer medium. Under the optimized conditions (pH 6.0, temperature 50 °C, substrate concentration 6 mM and shaking speed 200 rpm), the initial reaction rate, the GAMG yield and the S_cb reached 3.15 mM h⁻¹, 74.36% and 98.12%, respectively. The recyclability of [BMIM]PF₆ was also studied and found to be reusable for five batches with high recovery percentage (≥92%). Furthermore, the desired product and byproduct were easily separated since they were distributed in different phases. Additionally, higher V_max (3.14 versus 2.24 mM h⁻¹), lower apparent K_m (1.21 versus 1.80 mM) and E_a (25.97 versus 32.60 kJ mol⁻¹) were achieved in [BMIM]PF₆/buffer biphasic system than that in monophasic buffer system.     

Carbonic anhydrase inhibitors. Inhibition of the β-class enzyme from the pathogenic yeast Candida glabrata with anions

A β-carbonic anhydrase (CA, EC 4.2.1.1), the protein encoded by the NCE103 gene of Candida glabrata which also present in Candida albicans and Saccharomyces cerevisiae, was cloned, purified, characterized kinetically and investigated for its inhibition by a series simple, inorganic anions such as halogenides, pseudohalogenides, bicarbonate, carbonate, nitrate, nitrite, hydrogen sulfide, bisulfite, perchlorate, sulfate and some isosteric species. The enzyme showed significant CO₂ hydrase activity, with a k_cat of 3.8 × 10⁵ s^?1 and k_cat/K_M of 4.8 × 10⁷ M^?1 s^?1. The Cà glabrata CA (CgCA) was moderately inhibited by metal poisons (cyanide, azide, cyanate, thiocyanate, K_Is of 0.60–1.12 mM) but strongly inhibited by bicarbonate, nitrate, nitrite and phenylarsonic acid (K_Is of 86–98 μM). The other anions investigated showed inhibition constants in the low millimolar range, with the exception of bromide and iodide (K_Is of 27–42 mM).     

Butanol recovery from aqueous solution into ionic liquids by liquid–liquid extraction

Biobutanol has currently attracted considerable attention as an alternative biofuel to the petroleum-derived fuel due to several advantages including high energy content, low water absorption and easy application to the existing gasoline infrastructure. However, its production has still faced many obstacles to overcome including lack of energy-efficient butanol separation process from fermentation broth. To solve this issue, the extraction behavior of butanol from aqueous media into a variety of imidazolium-based ionic liquids (ILs) was investigated by liquid–liquid extraction. To understand the effect of ILs properties, the solvent characteristics of ILs such as mutual solubility of feed solvent (water) and extraction solvent (IL), distribution coefficient of butanol between water and IL, selectivity, and extraction efficiency were correlated with hydrophobicity and polarity of ILs. The butanol distribution between ILs and water strongly depends on the hydrophobicity of anions of ILs followed by the hydrophobicity of cations of ILs. On the other hand, butanol extraction efficiency and selectivity depend on the polarity of ILs. Considering extraction efficiency and selectivity, [Tf₂N]-based ILs among the tested ILs showed to be the best extract solvent for the recovery of butanol from aqueous media. Among the studied ILs, [Omim][Tf₂N] showed the highest butanol distribution coefficient (1.939), selectivity (132) and extraction efficiency (74%) at 323.15 K, respectively.