Removal of nitrobenzene vapors by a trickling air biofilter

A stable microbial consortium that grew on nitrobenzene (NB) as its sole source of carbon, nitrogen and energy and liberated excess nitrogen as ammonia, was immobilized on a perlite-packed trickling air biofilter. On a sustained basis, the biofilter removed 50 g NB m⁻³ packing h⁻¹ and its operation at pH 8.7 resulted in ammonia stripping, making pH and salinity controls unnecessary. Low maintenance and stable performance during 4 months of continuous operation invite the scale-up of this biofilter for control of NB emissions. Received 12 September 1996/ Accepted in revised form 17 December 1996     

Performance evaluation of a wood-chip based biofilter using solid-phase microextraction and gas chromatography-mass spectroscopy-olfactometry

A pilot-scale mobile biofilter was developed where two types of wood chips (western cedar and 2 in. hardwood) were examined to treat odor emissions from a deep-pit swine finishing facility in central Iowa. The biofilters were operated continuously for 13 weeks at different air flow rates resulting in a variable empty bed residence time (EBRT) from 1.6 to 7.3 s. During this test period, solid-phase microextraction (SPME) PDMS/DVB 65 microm fibers were used to extract volatile organic compounds (VOCs) from both the control plenum and biofilter treatments. Analyses of VOCs were carried out using a multidimentional gas chromatography-mass spectrometry-olfactometry (MDGC-MS-O) system. Results indicated that both types of chips achieved significant reductions in p-cresol, phenol, indole and skatole which represent some of the most odorous and odor-defining compounds known for swine facilities. The results also showed that maintaining proper moisture content is critical to the success of wood-chip based biofilters and that this factor is more important than media depth and residence time.     

Performance and Microbial Diversity of a Trickle‐Bed Air Biofilter under Interchanging Contaminants

A trickle‐bed air biofilter (TBAB) was evaluated under conditions of interchanging the feed volatile organic compounds (VOCs) in the sequence methyl ethyl ketone (MEK), toluene, methyl isobutyl ketone (MIBK), styrene, and then back to MEK. The obtained performance results revealed that the biofilter provided high removal efficiency within the critical loading of each VOC, which was previously defined in the non‐interchanging VOC fed biofilter. The biofilter easily acclimated to the oxygenated compounds (MEK and MIBK), but re‐acclimation was delayed for the aromatic compounds (toluene and styrene). Ratios of the molar mass of CO₂ produced per molar mass of VOC removed were investigated. It has been found that the ratios for the aromatic compounds closely resembled the theoretical complete chemical oxidation based ratios while larger differences were encountered with the oxygenated compounds. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes was used to assess the impact of interchanging VOCs on the bacterial community structure in the biofilter. The results from denaturing gradient gel electrophoresis (DGGE) showed that the structure of the microbial community in the biofilter was different after each interchange of VOCs.     

Biofiltration of a mixture of volatile organic compounds on granular activated carbon

The performance of a biofilter packed with Active Carbon (AC) was evaluated. The effluent (alcohol, ketones, esters, aromatic and chlorinated compounds) treated was a representative mixture of most common industrial emissions. To achieve a better knowledge of multicomponent adsorption mechanisms, and to underline the interest of inoculating AC, a control abiotic humidified filter had been operated in the same conditions as the biofilter. For a load of 110 g VOC m(-3) AC h(-1), after 55 days of operation, the removal efficiency was higher in the biotic than in the abiotic filter (85% vs 55%, respectively). Moreover, in the biofilter, at steady state, the elimination of all compounds was almost complete except for chlorinated compounds and p-xylene (removal efficiency of 25% and 64%, respectively). The microbial colonization of AC involved a decrease of the adsorption sites accessibility and enhanced the treatment of VOCs (volatile organic compounds) having a lower affinity for activated carbon. Moreover, while aromatic compounds and MIBK were eliminated along the overall height of the biofilter, pollutants with reduced affinity for AC, such as methanol, acetone, and halogenated compounds were only treated on the second half of the reactor. Thus, the affinity for activated carbon was an important parameter controlling the biodegradation process. Nevertheless, the use of AC as packing material in biofilters treating complex mixtures of VOCs is limited. Actually, similar removal efficiency could be reached, in the same conditions, for a biofilter packed with granular peat. Furthermore, for the biofilter packed with AC, the column height necessary to remove biodegradable compounds, with reduced affinity for the support, was important.     

Impacts of nitrogen fertilization on volatile organic compound emissions from decomposing plant litter

Nonmethane volatile organic compounds (VOCs) are reactive, low molecular weight gases that can have significant effects on soil and atmospheric processes. Research into biogenic VOC sources has primarily focused on plant emissions, with few studies on VOC emissions from decomposing plant litter, another potentially important source. Likewise, although there have been numerous studies examining how anthropogenic increases in nitrogen (N) availability can influence litter decomposition rates, we do not know how VOC emissions may be affected. In this study, we measured the relative contribution of VOCs to the total carbon (C) emitted from decomposing litter and how N amendments affected VOC emissions. We incubated decomposing litter from 12 plant species over 125 days, measuring both CO₂ and VOC emissions throughout the incubation. We found that VOCs represented a large portion of C emissions from a number of the litter types with C emissions as VOCs ranging from 0% to 88% of C emissions as CO₂. Methanol was the dominant VOC emitted, accounting for 28–99% of total VOC emissions over the incubation period. N additions increased CO₂ production in 7 of the 12 litter types by 5–180%. In contrast, N additions decreased VOC emissions in 8 of the 12 litter types, reducing net VOC emissions to near zero. The decrease in VOC emissions was occasionally large enough to account for the increased CO₂ emissions on a per unit C basis, suggesting that N additions may not necessarily accelerate C loss from decomposing litter but rather just switch the form of C emitted. Together these results suggest that, for certain litter types, failure to account for VOC emissions may lead to an underestimation of C losses from litter decomposition and an overestimation of the effects of N additions on rates of litter decomposition.     

Volatile organic compound emissions from Microcystis aeruginosa under different phosphorus sources and concentrations

In eutrophicated water, cyanobacteria massively grow and release an abundance of volatile organic compounds (VOCs) that contribute to the water odor. To uncover the effects of different phosphorus (P) nutrients on the formation of cyanobacteria VOCs and water odor, the cell growth and VOC emissions of Microcystis aeruginosa were investigated under different P nutrient conditions. Among K₂HPO₄, Na₄P₂O₇, and (NaPO₃)₆, K₂HPO₄ showed the largest increase in cell density, while a reduction in P concentration decreased the cell density. There were 26, 23 and 22 compounds in M. aeruginosa VOCs with K₂HPO₄, Na₄P₂O₇ and (NaPO₃)₆ as the sole P source, respectively, including sulfocompounds, terpenoids, benzenes, hydrocarbons, alcohols, aldehydes, and esters. Non‐P markedly promoted the VOC emission, and six additional compounds were observed: α‐pinene, 1‐phenyl‐1‐butanone, 1H‐1‐ethylidene‐indene, 2,6,10‐trimethyl‐tetradecane, 2‐ethyl‐hexanal, and acetic acid 2‐ethylhexyl ester. It can be deduced that cyanobacteria release different VOC blends using various P forms in eutrophicated waters, and the reduction of P amount promotes VOC emission and increases the water odor.     

The volatile organic compounds of introduced and native dung and carrion and their role in dung beetle foraging behaviour

1. The decomposition of biological material produces a plethora of volatile organic compounds (VOCs), which are implicated in the foraging behaviour of coprophagous and necrophagous insects. Dung beetles (Coleoptera: Scarabaeidae: Scarabaeinae) have an acute olfactory system used to locate food resources. Accordingly, identification of food resource VOCs potentially used in food location is integral to understanding dung beetle foraging ecology. 2. In this study, volatile emissions from dung and carrion of native and introduced animals in New Zealand were analysed using solid‐phase microextraction (SPME) and gas chromatography‐mass spectrometry (GC‐MS). Volatile profiles were compared via principal component analyses (PCAs) and cluster solutions based on attractiveness using canonical discriminant analysis (CDA). 3. A total of 115 compounds were detected from 21 food types. Statistical analyses showed that dung and carrion volatile profiles clustered according to attractiveness to the dung beetle Saphobius edwardsi, and that different dung types formed distinct clusters and grouped separately from carrion. 4. This study suggests that volatile profiles emitted by food resources used by dung beetles are complex, producing distinct odours, which potentially mediate foraging decisions.     

Biofiltration of composting gases using different municipal solid waste-pruning residue composts: monitoring by using an electronic nose

The concentration of volatile organic compounds (VOCs) during the composting of kitchen waste and pruning residues, and the abatement of VOCs by different compost biofilters was studied. VOCs removal efficiencies greater than 90% were obtained using composts of municipal solid waste (MSW) or MSW-pruning residue as biofilter material. An electronic nose identified qualitative differences among the biofilter output gases at very low concentrations of VOCs. These differences were related to compost constituents, compost particle size (2-7 or 7-20 mm), and a combination of both factors. The total concentration of VOCs determined by a photoionization analyser and inferred from electronic nose data sets were correlated over an ample range of concentrations of VOCs, showing that these techniques could be specially adapted for the monitoring of these processes.     

Biotreatment of waste gas containing pyridine in a biofilter

Industrial waste gas emissions containing pyridine are generated from pyridine manufacturing industries, and in industrial operations where pyridine is used as a solvent, as an intermediate for synthesis and as a catalyst for a variety of applications. Pyridine has unpleasant fishy odor with an odor index of 2390 and waste gaseous emissions containing pyridine require proper treatment prior to discharge. A biofilter, packed with compost and wood chips and inoculated with Pseudomonas pseudoalcaligenes-KPN for enrichment of pyridine-degrading microorganisms, was operated on a continuous feed basis for a period of more than 2 years. The results indicate that the biofilter medium with optimal moisture content of 68% and an effective bed retention time (EBRT) of 28.50s could degrade pyridine effectively (>99%) at a loading of 434 g pyridine m(-3)h(-1). The treated waste gas was also found to be free from pyridine odor.     

Real‐time monitoring of herbivore induced volatile emissions in the field

When plants are damaged by herbivorous insects they emit a blend of volatile organic compounds (VOCs) which include a range or terpenoids and green leaf volatiles (GLVs) formed via different metabolic pathways. The precise timing of these emissions upon the onset of herbivore feeding has not been fully elucidated, and the information that is available has been mainly obtained through laboratory based studies. We investigated emissions of VOCs from Populus tremula L. ×P. tremuloides Michx. during the first 20 h of feeding by Epirrita autumnata (autumnal moth) larvae in a field site. The study was conducted using Proton Transfer Reaction‐Mass Spectrometry (PTR‐MS) to measure emissions online, with samples collected for subsequent analysis by complementary gas chromatography‐mass spectrometry for purposes of compound identification. GLV emission peaks occurred sporadically from the outset, indicating herbivore activity, while terpene emissions were induced within 16 h. We present data detailing the patterns of monoterpene (MT), GLV and sesquiterpene (SQT) emissions during the early stages of herbivore feeding showing diurnal MT and SQT emission that is correlated more with temperature than light. Peculiarities in the timing of SQT emissions prompted us to conduct a thorough characterization of the equipment used to collect VOCs and thus corroborate the accuracy of results. A laboratory based analysis of the throughput of known GLV, MT and SQT standards at different temperatures was made with PTR‐MS. Enclosure temperatures of 12, 20 and 25°C had little influence on the response time for dynamic measurements of a GLV or MT. However, there was a clear effect on SQT measurements. Elucidation of emission patterns in real‐time is dependent upon the dynamics of cuvettes at different temperatures.     

Microbial consumption and production of volatile organic compounds at the soil-litter interface

Substantial amounts of volatile organic compounds (VOCs) can be released during decomposition and these compounds can affect atmospheric chemistry, belowground processes, and the structure of microbial communities in litter and soil. However, we have a limited understanding of the types, quantities and ecological impacts of VOCs emitted from litter. Here we used a closed flow-through system and proton transfer reaction mass spectrometry (PTR-MS) to characterize VOC emissions from soil and two litter types (Pinus taeda and Acer rubrum) over a 72-day incubation period. Microbial respiration rates were measured throughout the incubation, and the soils were harvested at the end of the incubation to determine how litter VOCs influenced soil C dynamics, N mineralization rates, and bacterial communities. Using the PTR-MS we identified over 100 VOCs, with 10 VOCs making up the majority of emissions. VOCs accounted for up to 2.5% of the C flux from litter. Soil was a net sink of litter VOCs, absorbing up to 80% of VOCs released by litter, and exposure of soil to litter VOCs increased microbial respiration rates in soil by up to 15%. However, we observed negligible impacts of litter VOCs on soil nutrient levels and bacterial community structure, suggesting that soils must be exposed to higher concentrations of VOCs than observed in our study, to cause effects on these soil characteristics. Overall, VOCs appear to have an important influence on C dynamics at the soil-litter interface and VOC emissions from decomposing litter may represent an understudied component of biosphere–atmosphere interactions.     

The influence of molecular structure on odor qualities and odor detection thresholds of volatile alkylated phenols

The relationship between chemical structure and odor characteristics of aroma compounds is interesting in terms of establishing a fundamental understanding and, in the long term, a perspective for the prediction of odor qualities and intensities of unknown compounds; on the other hand, such studies provide a useful tool to analytically elucidate compounds that are exceptionally potent odor contributors to a specific smell. In this respect, a broad knowledge of compounds with regard to their odor threshold and smell specificities compiled in a comprehensive odor library would drastically simplify the chemoanalytical process in identifying aromas and smells. Whereas numerous odor-active substance classes have been investigated intensively, such relationships and fundamental data have hitherto not been established for volatile phenols. In this study, a homologous series and isomers of 30 volatile phenols, including monoalkylated phenols and di- and trimethylphenols, were evaluated by determining their aroma attributes and their odor detection thresholds in air. The investigation demonstrates that the odor qualities, among them leather-like, horse stable-like, and medicinal, as well as the respective threshold values clearly depend on the arrangement of the alkyl substituents at the phenol ring. In particular, phenols with monoalkyl groups in the meta-position were found with very low odor detection thresholds of <1 ng/L air. A comparison of some selected phenols and their corresponding toluenes, which were found to be almost odorless, showed in addition that the phenolic hydroxyl group is obviously an important factor for the odor characteristic of this substance class.     

Biofiltration for the removal and ‘detoxification’ of a complex mixture of volatile organic compounds

A study was performed to determine the effectiveness of using biofiltration for the removal of a complex mixture of volatile organic compounds (VOCs) air-stripped from petroleum hydrocarbons. A biofilter was constructed which contained 264 cm³ of packing material (Celite^? R-635). The unit was inoculated with a mixed culture containing a hydrocarbon-degrading Pseudomonas sp and an Alcaligenes sp. Several of the major compounds in the VOC mixture were monitored individually, along with the total VOCs, using gas chromatography. The average influent concentration of the VOC mixture was 320 ppmv and the average total VOC removal rate was over 56%, with the average removal rate of the monitored individual compounds ranging from 49–90%. After 30 days of operation the average overall removal rate was 69% and the removal of the major compounds averaged 92%. The toxicity and mutagenicity of the air stream was monitored using the Microtox and Ames assays, respectively. These data show marked decreases in toxicity and mutagenicity of the air stream as a result of the biofiltration treatment. The biofiltration system, therefore, was not only effective in removing VOCs from the air stream over an extended time-period, but was also effective in greatly reducing the toxicity and mutagenicity associated with the remaining VOCs. Received 03 July 1997/ Accepted in revised form 25 November 1997     

RNA interference (RNAi)-induced suppression of nicotine demethylase activity reduces levels of a key carcinogen in cured tobacco leaves

Technologies for reducing the levels of tobacco product constituents that may contribute to unwanted health effects are desired. Target compounds include tobacco-specific nitrosamines (TSNAs), a class of compounds generated through the nitrosation of pyridine alkaloids during the curing and processing of tobacco. Studies have reported the TSNA N '-nitrosonornicotine (NNN) to be carcinogenic in laboratory animals. NNN is formed via the nitrosation of nornicotine, a secondary alkaloid produced through enzymatic N -demethylation of nicotine. Strategies to lower nornicotine levels in tobacco ( Nicotiana tabacum L.) could lead to a corresponding decrease in NNN accumulation in cured leaves. The major nicotine demethylase gene of tobacco has recently been isolated. In this study, a large-scale field trial was conducted to evaluate transgenic lines of burley tobacco carrying an RNA interference (RNAi) construct designed to inhibit the expression of this gene. Selected transgenic lines exhibited a six-fold decrease in nornicotine content relative to untransformed controls. Analysis of cured leaves revealed a commensurate decrease in NNN and total TSNAs. The inhibition of nicotine demethylase activity is an effective means of decreasing significantly the level of a key defined animal carcinogen present in tobacco products.     

Biodegradation of benzo[α]pyrene,toluene, and formaldehyde from the gas phase by a consortium of Rhodococcus erythropolis and Fusarium solani

Polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs) are important indoor contaminants. Their hydrophobic nature hinders the possibility of biological abatement using biofiltration. Our aim was to establish whether the use of a consortium of Fusarium solani and Rhodococcus erythropolis shows an improved performance (in terms of mineralization rate and extent) towards the degradation of formaldehyde, as a slightly polar VOC; toluene, as hydrophobic VOC; and benzo[α]pyrene (BaP) as PAH at low concentrations compared to a single-species biofilm in serum bottles with vermiculite as solid support to mimic a biofilter and to relate the possible improvements with the surface hydrophobicity and partition coefficient of the biomass at three different temperatures. Results showed that the hydrophobicity of the surface of the biofilms was affected by the hydrophobicity of the carbon source in F. solani but it did not change in R. erythropolis. Similarly, the partition coefficients of toluene and BaP in F. solani biomass (both as pure culture and consortium) show a reduction of up to 38 times compared to its value in water, whereas this reduction was only 1.5 times in presence of R. erythropolis. Despite that increments in the accumulated CO2 and its production rate were found when F. solani or the consortium was used, the mineralization extent of toluene was below 25%. Regarding BaP degradation, the higher CO2 production rates and percent yields were obtained when a consortium of F. solani and R. erythropolis was used, despite a pure culture of R. erythropolis exhibits poor mineralization of BaP.     

Petrochemical wastewater odor treatment by biofiltration

The treatment of odorous pollutants by microorganisms on packed waste straw and cortex was investigated at the wastewater treatment plant of the Shanghai petrochemical factory. The removal efficiency of H₂S, NH₃ and VOCs (volatile organic compounds) reached 98%, 91% and 90%, respectively after operation for one month at an empty bed retention time (EBRT) of 120 s. The heterotrophic bacteria were found to be the dominant microorganism in the biofilter, while fungi and actinomycetes were also present. The bacteria were mostly identified as the members of the genus Bacillus (62.5% of cultured bacteria). The single strand conformation polymorphism (SSCP) results revealed that the genus Bacillus and Pseudomonas were the predominant bacteria. The microbial diversity gradually increased as the treatment progressed, which indicated that the microbial community in the biofilter became more stable upon pollutant removal. The scanning electron microscopy (SEM) was performed to evaluate the microorganism growth on the media. It was found that the waste straw and cortex were suitable for microorganism attachment and growth, and may have potential application in odor treatment.     

Experiments and three phase modelling of a biofilter for the removal of toluene and trichloroethylene

Volatile organic compounds, namely, toluene, trichloroethylene, styrene, etc., disposed off by electronics and polymer industries, are very harmful. The treatment of VOC laden air through biochemical route is one of the potential options for reduction of their concentration in parts per million or parts per billion level. Under the present investigation, a 0.05-m diameter and 0.58-m high trickle bed biofilter has been studied for the removal of VOCs namely toluene and trichloroethylene from a simulated air–VOC mixture using pure strain of Pseudomonas putida (NCIM2650) in immobilized form. Inlet concentrations of VOCs have been varied in two ranges, the lower being 0.20–2.00 g/m³ and higher being 10–20 g/m³, respectively. The Monod type rate kinetics of removal of VOCs has been determined. A three-phase deterministic mathematical model has been developed taking the simultaneous reaction kinetics and interphase (gas to liquid to biofilm) mass transfer rate of VOCs into consideration. Experimentally determined kinetic parameters and mass transfer coefficients calculated using standard correlations have been used. Concentrations have been simulated for all the three phases. Simulated results based on the model have been compared with the experimental ones for both gas and liquid phases satisfactorily. The mathematical model validated through the successful comparison with experimental data may be utilized for the prediction of performance of biofilters undergoing removal of different VOCs in any further investigation and may be utilized for the scale-up of the system to industrial scale.     

Removal of n-hexane by Fusarium solani with a gas-phase biofilter

A gas-phase biofilter inoculated with the fungus Fusarium solani, isolated from a consortium grown on hexane vapors, was used to degrade this compound. The biofilter, packed with perlite and operated with an empty bed residence time of 60 s, was supplied with hexane concentrations between 0.5 g m⁻³ and 11 g m⁻³. Biofilter performance was evaluated over 100 days of operation. Several strategies for supplying the nutritive mineral medium were assayed to maintain favorable conditions for the fungal growth and activity. The Fusarium system was able to sustain an average elimination capacity of 90 g m⁻³ _reactor h⁻¹ with a maximum of 130 g m⁻³ _reactor h⁻¹ . The mass transfer limitations due to high biomass development in the biofilter were confirmed in batch experiments. Bacterial contamination was observed, but experiments in the biofilter and in batch reactors using selective inhibitors and controlled pH confirmed the predominant role of the fungus. Results indicate that fungal biofilters can be an effective alternative to conventional abatement technologies for treating hydrophobic compounds.

     

Biodegradation of ethanol vapour in a biofilter

Biofiltration is a cost effective air pollution control technology for volatile organic compounds. Biofiltration of ethanol vapour from air stream was evaluated in this study. Experimental investigations were conducted on a laboratory scale biofilter, containing mixture of compost and polystyrene inert particles as the filter materials. Mixed consortium of activated sludge was used as a inoculum. The continuous performance of biofilter for ethanol removal was monitored for different concentrations and flow rates. The removal efficiencies decreased at higher concentrations and higher gas flow rates. A maximum elimination capacity of 195 g m^х h^у was achieved. The response of biofilter to shut down and restart-up operation showed that the biofilm has got a good stability.