Consumption‐based Material Flow Accounting

In 2007, imports accounted for approximately 34% of the material input (domestic extraction and imports) into the Austrian economy and almost 60% of the GDP stemmed from exports. Upstream material inputs into the production of traded goods, however, are not yet included in the standard framework of material flow accounting (MFA). We have reviewed different approaches accounting for these upstream material inputs, or raw material equivalents (RME), positioning them in a wider debate about consumption‐based perspectives in environmental accounting. For the period 1995–2007, we calculated annual RME of Austria's trade and consumption applying a hybrid approach. For exports and competitive imports, we used an environmentally extended input‐output model of the Austrian economy, based on annual supply and use tables and MFA data. For noncompetitive imports, coefficients for upstream material inputs were extracted from life cycle inventories. The RME of Austria's imports and exports were approximately three times larger than the trade flows themselves. In 2007, Austria's raw material consumption was 30 million tonnes or 15% higher than its domestic material consumption. We discuss the material composition of these flows and their temporal dynamics. Our results demonstrate the need for a consumption‐based perspective in MFA to provide robust indicators for dematerialization and resource efficiency analysis of open economies.     

The Biophysical Performance of Argentina (1970–2009)

The biophysical features of the Argentinean economy are examined using a social metabolism approach. A material flow analysis (MFA) for this economy was conducted for the period 1970–2009. Results show that Argentina follows a resource‐intensive and export‐oriented development model with a persistent physical trade deficit. Also, Argentina's terms of trade (the average weight in tonnes of imports that can be purchased through the sale of 1 tonne of exports) show a declining trend in the period of study. Argentina's economy shows a pattern typical of countries whose economies are based primarily on exports. Comparisons between Argentina's metabolic profile and the metabolic profile of other countries in Latin America and of Australia and Spain show that the Argentinean economy presents the same pattern as other Latin American exporting economies, and its terms of trade are opposite to those of industrialized economies.     

Rationale for and Interpretation of Economy-Wide Materials Flow Analysis and Derived Indicators

Economy-wide material flow analysis (MFA) and derived indicators have been developed to monitor and assess the metabolic performance of economies, that is, with respect to the internal economic flows and the exchange of materials with the environment and with other economies. Indicators such as direct material input (DMI) and direct material consumption (DMC) measure material use related to either production or consumption. Domestic hidden flows (HF) account for unused domestic extraction, and foreign HF represent the upstream primary resource requirements of the imports. DMI and domestic and foreign HF account for the total material requirement (TMR) of an economy. Subtracting the exports and their HF provides the total material consumption (TMC).
DMI and TMR are used to measure the (de-) coupling of resource use and economic growth, providing the basis for resource efficiency indicators. Accounting for TMR allows detection of shifts from domestic to foreign resource requirements. Net addition to stock (NAS) measures the physical growth of an economy. It indicates the distance from flow equilibrium of inputs and outputs that may be regarded as a necessary condition of a sustainable mature metabolism.
We discuss the extent to which MFA-based indicators can also be used to assess the environmental performance. For that purpose we consider different impacts of material flows, and different scales and perspectives of the analysis, and distinguish between turnover-based indicators of generic environmental pressure and impact-based indicators of specific environmental pressure. Indicators such as TMR and TMC are regarded as generic pressure indicators that may not be used to indicate specific environmental impacts. The TMR of industrial countries is discussed with respect to the question of whether volume and composition may be regarded as unsustainable.     

The Physical Economy of the United States of America

The United States is not only the world's largest economy, but it is also one of the world's largest consumers of natural resources. The country, which is inhabited by some 5% of the world's population, uses roughly one‐fifth of the global primary energy supply and 15% of all extracted materials. This article explores long‐term trends and patterns of material use in the United States. Based on a material flow account (MFA) that is fully consistent with current standards of economy‐wide MFAs and covers domestic extraction, imports, and exports of materials for a 135‐year period, we investigated the evolution of the U.S. industrial metabolism. This process was characterized by an 18‐fold increase in material consumption, a multiplication of material use per capita, and a shift from renewable biomass toward mineral and fossil resources. In spite of considerable improvements in material intensity, no dematerialization has happened so far; in contrast to other high‐income countries, material use has not stabilized since the 1970s, but has continued to grow. This article compares patterns and trends of material use in the United States with those in Japan and the United Kingdom and discusses the factors underlying the disproportionately high level of U.S. per capita resource consumption.     

Material Flows and Economic Growth in Developing China

The concept of sustainable development concerns not only the natural environment but also human societies and economies. The method of economy‐wide materials flow accounting and analysis (EW‐MFA) is internationally recognized as a valuable tool for studying the physical dimensions of economies. EW‐MFA has been carried out in many industrialized countries, but very little work has been done for developing China; this article can be regarded as one of the first attempts to study China's economy in terms of materials flows. In this article we have compiled materials flow accounts for China during the time series 1990 to 2002 and derived indicators associated with international comparison. Results show that the annual material consumption of China's economy continuously increased except for a slump around 1998, whereas the material efficiency exhibited a three‐phase trend reflecting different macropolicies of the Eighth, Ninth, and Tenth Five‐Year Plans implemented by the central government. Based on this experience with EW‐MFA for China, suggestions for methodology development and further research are given for improving EW‐MFA as a more effective tool for environmental management.     

Labor Embodied in Trade

Global production chains carry environmental and socioeconomic impacts embodied in each traded good and service. Even though labor and energy productivities tend to be higher for domestic production in high‐income countries than those in emerging economies, this difference is significantly reduced for consumption, when including imported products to satisfy national demand. The analysis of socioeconomic and environmental aspects embodied in consumption can shed a light on the real level of productivity of an economy, as well as the effects of rising imports and offshoring. This research introduces a consumption‐based metric for productivity, in which we evaluate the loss of productivity of developed nations resulting from imports from less‐developed economies and offshoring of labor‐intensive production. We measure the labor, energy, and greenhouse gas emissions footprints in the European Union's trade with the rest of the world through a multiregional input‐output model. We confirm that the labor footprint of European imports is significantly higher than the one of exports, mainly from low‐skilled, labor‐intensive primary sectors. A high share of labor embodied in exports is commonly associated with low energy productivities in domestic industries. Hence, this reconfirms that the offshoring of production to cheaper and low‐skilled, labor‐abundant countries offsets, or even reverts, energy efficiency gains and climate‐change mitigation actions in developed countries.     

Economic Integration in Tanzania (1970–2011): A Biophysical Assessment

This article assesses the impact of economic integration on Tanzania's sociometabolic profile for the years 1970–2011, which witnessed an opening and further integration of Tanzania's economy through increased trade and foreign investment, through a time‐series economy‐wide material flows analysis (EW‐MFA). The EW‐MFA results show that contrary to the trade patterns of many developing countries, increased economic integration has resulted in Tanzania becoming a net importer of resources across all material categories when measured by the physical trade balance indicator. Additionally, the article discusses the conceptual and empirical challenges of measuring ecologically unequal exchange with EW‐MFAs for developing countries whose export profiles are dominated by lightweight, high‐value precious stones and metals. It also assesses the degree to which the Tanzanian economy has undergone dematerialization over the past 40 years of economic integration.     

Materials Flow Accounting in Sweden Material Use for National Consumption and for Export

This article presents Swedish economy‐wide material flow accounts for the period 1987‐1998. It also shows possibilities for enhancing the international comparability of aggregated data on material use, by distinguishing between materials used for consumption and export purposes. The direct material input (DMI) is used as an aggregate measure to estimate the amounts of natural resources (except water and air) that are taken from nature into the economy within a year, including imports to and production within the region in question. The division of materials used for consumption and export purposes avoids double counting trade flows when DMI is applied to a group of countries. The annual DMI in Sweden for 1997‐1998, including production and imports, amounts to 24 to 27 metric tons per capita (t/c). The fossil fuel input varies only slightly over the period, from 3.2 t/c in 1991 to 3.6 t/c in 1996, a level deemed unsustainable by the Swedish Environmental Protection Agency. The input of renewable raw materials varies between 8 and 9 t/c. Ores and minerals vary between 11 and 15 t/c. The DMI puts Sweden above estimates made for Germany, the United States, and Japan and in the same range as the Netherlands. The differences in these values can mainly be explained by the relative importance of exports as compared to the size of the economy and by the variation in system boundaries for the data on natural resources. The system boundaries and data sources for natural resources need to be further defined to make the measures fully comparable. Around 5 t/c is exported, whereas the rest, around 20 t/c, is national consumption. The aggregate direct material consumption (DMC), which is the DMI minus exports, communicates the magnitude of resource use. Comparisons of the input with solid waste statistics indicate that quantity of waste (excluding mining waste) in Sweden is equal to about 10% relative of the total resource use. Material collected for recycling by the waste management system is equal to about 5% of the amount of virgin resources brought into society each year.     

Metabolic Profile of the Colombian Economy from 1970 to 2007

This article characterizes the societal metabolism of the Colombian economy, identifying the main factors of natural resources use, overuse, or exhaustion. The environmental sustainability of a country depends to a large extent on the size of the economy compared to the available resource base. Material flow indicators provide an assessment of size or scale of economies. Direct material flow indicators are used to analyze the ecological dimension of economic activity in the period 1970–2007. Some resource extraction conflicts are briefly described in the light of material flow analysis. Foreign and domestic demand promotes increasing extraction and export of domestic natural resources. This is sometimes related to an irreversible deterioration of the local environment. The concept of “ecologically unequal exchange” with the rest of the world is analyzed in this context. Colombia has a large and growing negative physical trade balance, whereas per capita use of materials is still about half of the industrial countries’ average.     

Chronological change of resource metabolism and decarbonization patterns in Pakistan: Perspectives from a typical developing country

With economic growth in many developing countries, not all are making similar progress with regard to material and environmental efficiencies. This study examines material use and CO₂ emission patterns and intensities from 1971 to 2015 in a typical developing country, Pakistan, and investigates national‐level and multi‐country‐level efficiency improvements using data envelopment analysis. The results are used to derive key policy insights for a sustainable economic transition with higher resource and carbon efficiencies. Results show that material intensity has reduced by 39.1% while CO₂ intensity has risen by 21.5% in the country. Pakistan, when compared with its top 10 export countries, was relatively more material and CO₂ intensive. National‐level efficiency was found to be low in most of the periods due to material/energy intensive agriculture and industries, low value‐added exports, etc. Insights from the national‐level efficiency analysis indicate that surging CO₂ intensities have started to decline since 2010 and the economy has greatly stabilized. Multi‐country analysis revealed that the efficiency gap between Pakistan and its developed export countries (such as the United Kingdom and France) has widened during the study period. Insights from the multi‐country analysis suggest that the economic growth and industrialization improves material and environmental efficiencies to some extent, yet these improvements are not equally distributed among all countries. As a way forward, integrated policies on sustainable resource consumption, carbon mitigation, and economic growth are necessary for accruing higher benefits from rising global trade and resource connectedness.     

Materials Flows in Finland: Resource Use in a Small Open Economy

In this article, the development of natural resource use in Finland during the period 1970-1997 is analyzed. In measuring natural resource use, the concept of total material requirement (TMR) is applied. The focus is on the linkages of resource use with the changing structures of the economy. The linkages are studied using input-output analysis.
Using input-output analysis, the TMR is further partitioned into resources used for domestic final use or for total material consumption (TMC) and total material requirement of exports (TME). The analysis shows that TMR has the problem of double accounting: if the TMRs of all countries of the world are summed, then international trade would be accounted for twice in the world TMR, once in imports and once in exports of each country.
The TMC concept does not have this kind of defect. In a small, open economy like that of Finland, where the share of foreign trade is large, the difference between the TMR and the TMC is also large. We show that by 1997, the TME comprised about half of Finland's TMR and that the growth of the TMR over the study period has been due to the TME only as the TMC has stayed rather constant.     

The Metabolic Transition in Japan

The notion of a (socio‐) metabolic transition has been used to describe fundamental changes in socioeconomic energy and material use during industrialization. During the last century, Japan developed from a largely agrarian economy to one of the world's leading industrial nations. It is one of the few industrial countries that has experienced prolonged dematerialization and recently has adopted a rigorous resource policy. This article investigates changes in Japan's metabolism during industrialization on the basis of a material flow account for the period from 1878 to 2005. It presents annual data for material extraction, trade, and domestic consumption by major material group and explores the relations among population growth, economic development, and material (and energy) use. During the observed period, the size of Japan's metabolism grew by a factor of 40, and the share of mineral and fossil materials in domestic material consumption (DMC) grew to more than 90%. Much of the growth in the Japanese metabolism was based on imported materials and occurred in only 20 years after World War II (WWII), when Japan rapidly built up large stocks of built infrastructure, developed heavy industry, and adopted patterns of mass production and consumption. The surge in material use came to an abrupt halt with the first oil crisis, however. Material use stabilized, and the economy eventually began to dematerialize. Although gross domestic product (GDP) grew much faster than material use, improvements in material intensity are a relatively recent phenomenon. Japan emerges as a role model for the metabolic transition but is also exceptional in many ways.     

Development and Dematerialization: An International Study

Economic development and growth depend on growing levels of resource use, and result in environmental impacts from large scale resource extraction and emissions of waste. In this study, we examine the resource dependency of economic activities over the past several decades for a set of countries comprising developing, emerging and mature industrialized economies. Rather than a single universal industrial development pathway, we find a diversity of economic dependencies on material use, made evident through cluster analysis. We conduct tests for relative and absolute decoupling of the economy from material use, and compare these with similar tests for decoupling from carbon emissions, both for single countries and country groupings using panel analysis. We show that, over the longer term, emerging and developing countries tend to have significantly larger material-economic coupling than mature industrialized economies (although this effect may be enhanced by trade patterns), but that the contrary is true for short-term coupling. Moreover, we demonstrate that absolute dematerialization limits economic growth rates, while the successful industrialization of developing countries inevitably requires a strong material component. Alternative development priorities are thus urgently needed both for mature and emerging economies: reducing absolute consumption levels for the former, and avoiding the trap of resource-intensive economic and human development for the latter.     

The Barred Antshrike (Thamnophilus doliatus) on Trinidad and Tobago: habitat niche expansion of a generalist forager

Summary The Barred Antshrike (Thamnophilus doliatus) is the most abundant insectivorous foliage-gleaning vertebrate in both closed rain forest and second growth on the island of Tobago. However, it occurs only in second growth on the larger neighbor island of Trinidad and on the neotropical mainland.Habitat niche expansion into Tobago forest has been facilitated by several behavioral traits which set the antshrike apart from other foliage-gleaners of forest and second growth on Tobago. The antshrike captures a higher diversity of foliage, branch & trunk, and terrestrial arthropods. It forages over a wider range of heights and under a wider variety of crown cover situations than any of its closest ecological counterparts on Tobago. The antshrike also takes a wider range of prey sizes and regularly uses additional food sources, including fruit and ants, not taken by other guild members. The broad foraging niche of the antshrike enables it to breed during many times of the year when other narrower-niched foliage-gleaners do not.On Trinidad, although the most common foliagegleaner in second growth, the antshrike was not observed in adjacent closed rain forest. Several facts suggest that diffuse competition may be excluding antshrikes from Trinidad forest: 1) a general pattern of rarity or absence in other parts of its range where there are more guild members; 2) more species and individuals of foliagegleaners with an overall higher biomass in Trinidad forest than in Tobago forest; 3) foliage arthropod resources are significantly (1.7x) lower in Trinidad forest than Tobago forest, suggesting that Trinidad forest guild members may be depressing the quantity of important resources for antshrikes; and 4) Trinidad forest species with the highest foraging similarity to antshrikes have a greater precentage of prey captures comprised of relatively specialized attack behaviors than do Tobago forest antshrikes.Foraging generalists like the Barred Antshrike appear to expand or contract their habitat niches depending upon the number of ecologically similar species in a given habitat. They may occur in high densities in habitats typically foreign to them provided competitors are few and there is sufficient food to supply their catholic requirements.     

The Dematerialization Potential of the Australian Economy

In this article we test the long‐term dematerialization potential for Australia in terms of materials, energy, and water use as well as CO₂ emissions by introducing concrete targets for major sectors. Major improvements in the construction and housing, transport and mobility, and food and nutrition sectors in the Australian economy, if coupled with significant reductions in the resource export sectors, would substantially improve the current material, energy, and emission intensive pattern of Australia's production and consumption system. Using the Australian Stocks and Flows Framework we model all system interactions to understand the contributions of large‐scale changes in technology, infrastructure, and lifestyle to decoupling the economy from the environment. The modeling shows a considerable reduction in natural resource use, while energy and water use decrease to a much lesser extent because a reduction in natural resource consumption creates a trade‐off in energy use. It also shows that trade and economic growth may continue, but at a reduced rate compared with a business‐as‐usual scenario. The findings of our modeling are discussed in light of the large body of literature on dematerialization, eco‐efficiency, and rebound effects that may occur when efficiency is increased. We argue that Australia cannot rely on incremental efficiency gains but has to undergo a sustainability transition to achieve a low carbon future to keep in line with the international effort to avoid climate change and resource use conflicts. We touch upon the institutional changes that would be required to guide a sustainability transition in the Australian economy, such as an emission trading scheme.     

Trade, Materials Flows, and Economic Development in the South: The Example of Chile

Materials flow analysis (MFA) is internationally recognized as a key tool to assess the biophysical metabolism of societies and to provide aggregated indicators for environmental pressures of human activities. Economy-wide MFAs have been compiled for a number of Organisation for Economic Cooperation and Development (OECD) countries, but so far very few studies exist for countries in the South. In this article, the first materials-flow-based indicators for Chile are presented. The article analyzes the restructuring of the Chilean economy toward an active integration in the world markets from the perspective of natural resource use in a time series from 1973 to 2000. Special emphasis is placed on the assessment of materials flows related to Chile's international trade relations. Results show that material inputs to the Chilean economy increased by a factor of 6, mainly as a result of the promotion of resource-intensive exports from the mining, fruit growing, forestry, and fishery sectors. At more than 40 tons, Chile's resource use per capita at present is one of the highest in the world. The article addresses the main shortcomings of the MFA approach, such as weightbased aggregation and the missing links between environmental pressures and impacts, and gives suggestions for methodological improvements and possible extensions of the MFA framework, with the intent of developing MFA into a more powerful tool for policy use.     

Materials Metabolism Analysis of China's Highway Traffic System (HTS) for Promoting Circular Economy

With the rapid growth of highway mileage and vehicles, the Chinese highway traffic system (HTS) has become one of the great resource consumers. This article attempts to evaluate the material metabolism of China's HTS during 2001–2005 using the approach of material flow analysis (MFA) and to explore possible measures to promote circular economy throughout HTS. We measured a set of indicators to illustrate the whole material metabolism of China's HTS. The results indicated that the direct material input (DMI) of China's HTS increased from 1181.26 million tonnes (Mt) in 2001 to 1,874.57 Mt in 2005, and about 80% of DMI was accumulated in the system as infrastructure and vehicles. The domestic processed output (DPO) increased by 59.0% from 2001 to 2005. Carbon dioxide and solid waste accounted for 80.5% and 10.4% of DPO, respectively. The increase of resource consumption and pollutant emissions kept pace with the growth of transportation turnover. All these suggest that China's HTS still followed an extensive linear developing pattern with large resource consumption and heavy pollution emissions during the study period, which brought great challenges to the resources and the environment. Therefore, it's high time for China to implement a circular economy throughout the HTS by instituting resource and energy savings, by reducing emissions in the field of infrastructure construction and maintenance, by reducing vehicles’ energy and materials consumption, and by recycling waste materials.     

Global Material Flows and Resource Productivity: Forty Years of Evidence

The international industrial ecology (IE) research community and United Nations (UN) Environment have, for the first time, agreed on an authoritative and comprehensive data set for global material extraction and trade covering 40 years of global economic activity and natural resource use. This new data set is becoming the standard information source for decision making at the UN in the context of the post‐2015 development agenda, which acknowledges the strong links between sustainable natural resource management, economic prosperity, and human well‐being. Only if economic growth and human development can become substantially decoupled from accelerating material use, waste, and emissions can the tensions inherent in the Sustainable Development Goals be resolved and inclusive human development be achieved. In this paper, we summarize the key findings of the assessment study to make the IE research community aware of this new global research resource. The global results show a massive increase in materials extraction from 22 billion tonnes (Bt) in 1970 to 70 Bt in 2010, and an acceleration in material extraction since 2000. This acceleration has occurred at a time when global population growth has slowed and global economic growth has stalled. The global surge in material extraction has been driven by growing wealth and consumption and accelerating trade. A material footprint perspective shows that demand for materials has grown even in the wealthiest parts of the world. Low‐income countries have benefited least from growing global resource availability and have continued to deliver primary materials to high‐income countries while experiencing few improvements in their domestic material living standards. Material efficiency, the amount of primary materials required per unit of economic activity, has declined since around 2000 because of a shift of global production from very material‐efficient economies to less‐efficient ones. This global trend of recoupling economic activity with material use, driven by industrialization and urbanization in the global South, most notably Asia, has negative impacts on a suite of environmental and social issues, including natural resource depletion, climate change, loss of biodiversity, and uneven economic development. This research is a good example of the IE research community providing information for evidence‐based policy making on the global stage and testament to the growing importance of IE research in achieving global sustainable development.     

基于MFA和DEA的区域经济环境效率评价-以辽宁省为例

对经济与环境效率的科学评价是实现区域可持续发展的前提。运用物质流分析将辽宁省经济系统中数据进行物质化处理,再利用改进的数据包络分析模型对环境和经济效率进行综合评价。结果表明:辽宁省物资消费不主要依赖于进口,向其它地区物质输出量大;环境效率评价的综合效率主要受规模因素影响而显著低于纯技术效率,而整体经济的综合效率却主要受纯技术效率影响而下降。第二产业比重依然偏大的产业结构特征是导致上述结果的主因。进一步改造提升传统产业,发展战略性新兴产业,提高第三产业发展水平,扩大环保规模,促进居民生活质量水平全面提升,将是辽宁省以及与之相似的资源依赖型区域可持续发展的方向。     

Enhanced Performance of the Eurostat Method for Comprehensive Assessment of Urban Metabolism: A Material Flow Analysis of Amsterdam

Sustainable urban resource management depends essentially on a sound understanding of a city's resource flows. One established method for analyzing the urban metabolism (UM) is the Eurostat material flow analysis (MFA). However, for a comprehensive assessment of the UM, this method has its limitations. It does not account for all relevant resource flows, such as locally sourced resources, and it does not differentiate between flows that are associated with the city's resource consumption and resources that only pass through the city. This research sought to gain insights into the UM of Amsterdam by performing an MFA employing the Eurostat method. Modifications to that method were made to enhance its performance for comprehensive UM analyses. A case study of Amsterdam for the year 2012 was conducted and the results of the Eurostat and the modified Eurostat method were compared. The results show that Amsterdam's metabolism is dominated by water flows and by port‐related throughput of fossil fuels. The modified Eurostat method provides a deeper understanding of the UM than the urban Eurostat MFA attributed to three major benefits of the proposed modifications. First, the MFA presents a more complete image of the flows in the UM. Second, the modified resource classification presents findings in more detail. Third, explicating throughput flows yields a much‐improved insight into the nature of a city's imports, exports, and stock. Overall, these advancements provide a deeper understanding of the UM and make the MFA method more useful for sustainable urban resource management.