MULTIPLEX DETECTION OF ESCHERICHIA COLI AND SALMONELLA ENTERITIDIS BY USING QUANTUM DOT-LABELED ANTIBODIES

In this study, we demonstrated the simultaneous detection of Escherichia coli and Salmonella enteritidis, by coupling immunomagnetic separation (IMS) with quantum dots (QDs) labeling. QDs having different emission wavelengths were conjugated with anti- E. coli and anti- Salmonella antibodies. QD–antibody conjugates were used to label immunomagnetically separated bacteria and the fluorescence intensities were measured for enumerations of both species. The concentrations of primary antibodies used in IMS, the ratio of QDs to antibodies during the conjugation and the concentration of QD–antibody conjugates used in labeling were optimized to enhance the sensitivity of the assay. After labeling bacteria with QDs, the quenching observed between bead–bacteria complex and QDs was eliminated by separating QDs from the complex using sodium dodecyl sulfate solution. The fluorescence intensities due to the capturing of different concentrations of bacteria were measured and the working ranges were found to be 5 × 10² to 5 × 10⁵ cfu/mL for E. coli and 4  ×  10² to 4  ×  10⁵ cfu/mL for S. enteritidis .

PRACTICAL APPLICATIONS

In this study, antibody-conjugated multicolor quantum dots (QDs) were used for simultaneous detection of Escherichia coli and Salmonella enteritidis . The results of this study indicate that QD labels can be used in multiplex, rapid and selective detection of bacteria with detection limits comparable with those of many novel methods in cases where the assay conditions are optimized. Furthermore, the assay can be modified for the simultaneous detection of more than two species through using QD labels having different emission wavelengths.     

Quantum dots as strain- and metabolism-specific microbiological labels

Biologically conjugated quantum dots (QDs) have shown great promise as multiwavelength fluorescent labels for on-chip bioassays and eukaryotic cells. However, use of these photoluminescent nanocrystals in bacteria has not previously been reported, and their large size (3 to 10 nm) makes it unclear whether they inhibit bacterial recognition of attached molecules and whether they are able to pass through bacterial cell walls. Here we describe the use of conjugated CdSe QDs for strain- and metabolism-specific microbial labeling in a wide variety of bacteria and fungi, and our analysis was geared toward using receptors for a conjugated biomolecule that are present and active on the organism's surface. While cell surface molecules, such as glycoproteins, make excellent targets for conjugated QDs, internal labeling is inconsistent and leads to large spectral shifts compared with the original fluorescence, suggesting that there is breakup or dissolution of the QDs. Transmission electron microscopy of whole mounts and thin sections confirmed that bacteria are able to extract Cd and Se from QDs in a fashion dependent upon the QD surface conjugate.     

Quantum Dots as Strain- and Metabolism-Specific Microbiological Labels

Biologically conjugated quantum dots (QDs) have shown great promise as multiwavelength fluorescent labels for on-chip bioassays and eukaryotic cells. However, use of these photoluminescent nanocrystals in bacteria has not previously been reported, and their large size (3 to 10 nm) makes it unclear whether they inhibit bacterial recognition of attached molecules and whether they are able to pass through bacterial cell walls. Here we describe the use of conjugated CdSe QDs for strain- and metabolism-specific microbial labeling in a wide variety of bacteria and fungi, and our analysis was geared toward using receptors for a conjugated biomolecule that are present and active on the organism's surface. While cell surface molecules, such as glycoproteins, make excellent targets for conjugated QDs, internal labeling is inconsistent and leads to large spectral shifts compared with the original fluorescence, suggesting that there is breakup or dissolution of the QDs. Transmission electron microscopy of whole mounts and thin sections confirmed that bacteria are able to extract Cd and Se from QDs in a fashion dependent upon the QD surface conjugate.     

Biotin-4-fluorescein based fluorescence quenching assay for determination of biotin binding capacity of streptavidin conjugated quantum dots

The valency of quantum dot nanoparticles conjugated with biomolecules is closely related to their performance in cell tagging, tracking, and imaging experiments. Commercially available streptavidin conjugates (SAv QDs) are the most commonly used tool for preparing QD-biomolecule conjugates. The fluorescence quenching of biotin-4-fluorscein (B4F) provides a straightforward assay to quantify the number of biotin binding sites per SAv QD. The utility of this method was demonstrated by quantitatively characterizing the biotin binding capacity of commercially available amphiphilic poly(acrylic acid) Qdot ITK SAv conjugates and poly(ethylene glycol) modified Qdot PEG SAv conjugates with emission wavelengths of 525, 545, 565, 585, 605, 625, 655, 705, and 800 nm. Results showed that 5- to 30-fold more biotin binding sites are available on ITK SAv QDs compared to PEG SAv QDs of the same color with no systematic variation of biotin binding capacity with size.     

Quantitative characterization of quantum dot‐labeled lambda phage for Escherichia coli detection

We characterize CdSe/ZnS quantum dot (QD) binding to genetically modified bacteriophage as a model for bacterial detection. Interactions among QDs, lambda (λ) phage, and Escherichia coli are examined by several cross‐validated methods. Flow and image‐based cytometry clarify fluorescent labeling of bacteria, with image‐based cytometry additionally reporting the number of decorated phage bound to cells. Transmission electron microscopy, image‐based cytometry, and electrospray differential mobility analysis allow quantization of QDs attached to each phage (4–17 QDs) and show that λ phage used in this study exhibits enhanced QD binding to the capsid by nearly a factor of four compared to bacteriophage T7. Additionally, the characterization methodology presented can be applied to the quantitative characterization of other fluorescent nanocrystal‐biological conjugates. Biotechnol. Bioeng. 2009;104: 1059–1067. Published 2009 Wiley Periodicals, Inc.     

Spatial energy transfer with observation of bimolecular singlet oxygen emission using quantum dots as donors and zinc‐phthalocyanine as acceptors

This study reports the influence of CdSe–ZnS core–shell quantum dots (QDs) for formation of singlet oxygen using zinc‐phthalocyanine (ZnPc) dyes in colloidal solutions. Using a microluminescence surface scan technique it was possible to measure accurately the photon diffusion length, or photon mean free path, inside the medium. Analyses were performed for a range of QD concentrations. Photon diffusion length was assigned to the bimolecular singlet oxygen emission at 707 nm. Related singlet oxygen emission was predicted by observing quenching of the photon diffusion length measured at the specific oxygen emission as a function of QD concentration, being a nontrivial phenomenon related to the QD donors. Diffusion length measured at 707 nm increased with QD concentration; in the absence of QDs, as in pure ZnPc samples, the emission peak at 707 nm was not observed.     

“Use of acidophilic bacteria of the genus Acidithiobacillus to biosynthesize CdS fluorescent nanoparticles (quantum dots) with high tolerance to acidic pH”

The use of bacterial cells to produce fluorescent semiconductor nanoparticles (quantum dots, QDs) represents a green alternative with promising economic potential. In the present work, we report for the first time the biosynthesis of CdS QDs by acidophilic bacteria of the Acidithiobacillus genus. CdS QDs were obtained by exposing A. ferrooxidans, A. thiooxidans and A. caldus cells to sublethal Cd²⁺ concentrations in the presence of cysteine and glutathione. The fluorescence of cadmium-exposed cells moves from green to red with incubation time, a characteristic property of QDs associated with nanocrystals growth. Biosynthesized nanoparticles (NPs) display an absorption peak at 360 nm and a broad emission spectra between 450 and 650 nm when excited at 370 nm, both characteristic of CdS QDs. Average sizes of 6 and 10 nm were determined for green and red NPs, respectively. The importance of cysteine and glutathione on QDs biosynthesis in Acidithiobacillus was related with the generation of H₂S. Interestingly, QDs produced by acidophilic bacteria display high tolerance to acidic pH. Absorbance and fluorescence properties of QDs was not affected at pH 2.0, a condition that totally inhibits the fluorescence of QDs produced chemically or biosynthesized by mesophilic bacteria (stable until pH 4.5–5.0). Results presented here constitute the first report of the generation of QDs with improved properties by using extremophile microorganisms.     

Comprehensive study of interaction between biocompatible PEG‐InP/ZnS QDs and bovine serum albumin

Polyethylene glycol (PEG) surface modified biocompatible InP/ZnS quantum dots (QDs) act as a potential alternative for conventional carcinogenic cadmium‐based quantum dots for in vivo and in vitro studies. Comprehensively, we studied the interaction between a model protein bovine serum albumin (BSA) and PEGylated toxic free InP/ZnS QDs using various spectroscopic tools such as absorption, fluorescence quenching, time resolved and synchronous fluorescence spectroscopic measurements. These studies principally show that tryptophan (Trp) residues of BSA have preferable binding affinity towards PEG‐InP/ZnS QDs surface and a blue shift in Trp fluorescence emission is a signature of conformational changes in its hydrophobic microenvironment. Photoluminescence (PL) intensity of Trp is quenched by ground state complex formation (static quenching) at room temperature. However, InP/ZnS@BSA conjugates become unstable with increasing temperature and PL intensity of Trp is quenched via dynamic quenching by PEG‐InP/ZnS QDs. Experimentally determined thermodynamic parameters for these conjugates have shown spontaneity, entropy driven and exothermic nature of bio‐conjugation. The calculated binding affinity (n ? 1, Hill coefficient) suggest that the affinity of InP/ZnS QDs for a BSA protein is not dependent on whether or not other BSA proteins are already bound to the QD surface. Energy transfer efficiency (E), Trp residue to InP/ZnS QDs distances and energy transfer rate (k_T) were all obtained from FÖrster resonance energy.     

Detection of tumor marker CA125 in ovarian carcinoma using quantum dots

The fluorescent labeling of biological materials usingsmall-molecule organic dyes is widely employed in bio-logical imaging and clinical diagnosis. Organic fluoro-phores, however, have certain characteristics that limittheir advantages in some applications. These limitationsinclude narrow excitation bands and broad emissionbands with red spectral tails, which make the simultaneousevaluation of several light-emitting probes difficult due tospectral overlap. Also, many organic dyes exhibit highp…     

Bioconjugated quantum dots for cancer research: Present status,prospects and remaining issues

Semiconductor quantum dots (QDs) are nanoparticles in which charge carriers are three dimensionally confined or quantum confined. The quantum confinement provides size-tunable absorption bands and emission color to QDs. Also, the photoluminescence (PL) of QDs is exceptionally bright and stable, making them potential candidates for biomedical imaging and therapeutic interventions. Although fluorescence imaging and photodynamic therapy (PDT) of cancer have many advantages over imaging using ionizing radiations and chemo and radiation therapies, advancement of PDT is limited due to the poor availability of photostable and NIR fluorophores and photosensitizing (PS) drugs. With the introduction of biocompatible and NIR QDs, fluorescence imaging and PDT of cancer have received new dimensions and drive. In this review, we summarize the prospects of QDs for imaging and PDT of cancer. Specifically, synthesis of visible and NIR QDs, targeting cancer cells with QDs, in vitro and in vivo cancer imaging, multimodality, preparation of QD-PS conjugates and their energy transfer, photosensitized production of reactive oxygen intermediates (ROI), and the prospects and remaining issues in the advancement of QD probes for imaging and PDT of cancer are summarized.