Cleaving the prohead RNA of bacteriophage phi 29 alters the in vitro packaging of restriction fragments of DNA-gp3

In vitro packaging of restriction fragments of the bacteriophage phi 29 DNA-gp3 (DNA-gene product 3 complex) in the defined system was dependent on prohead RNA. Truncated prohead RNAs were obtained by in situ RNase A digestion, isolated and sequenced. Proheads having the intact 174 base RNA were compared to proheads having RNAs of 120, 95, 71, 69 or 54 bases for the capacity to package the DNA-gp3 left and right ends and internal (non-end) fragments generated by the restriction enzymes EcoRI, HpaI and BstNI. Proheads with the 174 or 120 base RNAs packaged both left and right ends; internal fragments were packaged more efficiently by proheads with the 120 base RNA. Proheads with the 95 base RNA packaged DNA-gp3 left ends and internal fragments efficiently, but lost the capacity to package right ends. Only internal fragments were packaged by proheads with the 71 base RNA, and proheads having 69 or 54 base RNAs were inactive. RNA-free proheads were effectively reconstituted with purified 174 and 120 base RNAs to produce particles similar in biological activity to the proheads from which the RNAs were isolated. The 95 base RNA was the smallest RNA of the group that could reconstitute the prohead and direct fragment packaging, although packaging was inefficient. Alteration of the specificity of DNA fragment packaging with truncated prohead RNAs has delineated RNA domains that function in DNA-gp3 recognition and prohead binding.     

Role of the CCA bulge of prohead RNA of bacteriophage ø29 in DNA packaging

The oligomeric ring of prohead RNA (pRNA) is an essential component of the ATP-driven DNA packaging motor of bacteriophage ?29. The A-helix of pRNA binds the DNA translocating ATPase gp16 (gene product 16) and the CCA bulge in this helix is essential for DNA packaging in vitro. Mutation of the bulge by base substitution or deletion showed that the size of the bulge, rather than its sequence, is primary in DNA packaging activity. Proheads reconstituted with CCA bulge mutant pRNAs bound the packaging ATPase gp16 and the packaging substrate DNA-gp3, although DNA translocation was not detected with several mutants. Prohead/bulge-mutant pRNA complexes with low packaging activity had a higher rate of ATP hydrolysis per base pair of DNA packaged than proheads with wild-type pRNA. Cryoelectron microscopy three-dimensional reconstruction of proheads reconstituted with a CCA deletion pRNA showed that the protruding pRNA spokes of the motor occupy a different position relative to the head when compared to particles with wild-type pRNA. Therefore, the CCA bulge seems to dictate the orientation of the pRNA spokes. The conformational changes observed for this mutant pRNA may affect gp16 conformation and/or subsequent ATPase-DNA interaction and, consequently, explain the decreased packaging activity observed for CCA mutants.     

Prohead RNA of bacteriophage phi 29: size, stoichiometry and biological activity.

We previously demonstrated (Guo et al., 1987. Nucl. Acids Res. 15, 7081-7090) that purified proheads of bacteriophage phi 29 contain an RNA of 120 bases which is essential for DNA packaging. Here we report that this RNA exists primarily as a polymer of ca. 174 residues in phage-infected cells and that ca. 54 bases are cleaved from its 3'-terminus by adventitious nucleases during the purification of proheads. The long and short forms of the RNA had similar activity in in vitro DNA packaging and phage assembly. We report the sequence of the long form of the RNA and show that similar long and short forms can be isolated from the proheads of the phi 29 relatives phi 21, phi 15 and SF5. The concentration dependence in the reconstitution of RNA-free proheads suggests that one copy of the RNA is sufficient to restore DNA packaging activity to RNA-free proheads. However, quantitative measurements indicate that 5 to 6 copies of the RNA are present on proheads isolated from phage-infected cells.     

Initiation events in in-vitro packaging of bacteriophage phi 29 DNA-gp3

Initiation events in the packaging of bacteriophage phi 29 DNA-gp3 (DNA-gene product 3 complex) were studied in a completely defined in-vitro system that included purified proheads, DNA-gp3 and the DNA packaging protein gp16. In the sequential interactions, gp16 first bound to, and was modified by, the prohead. The prohead-gp16 complex then bound to DNA-gp3, resulting in a second modification of gp16 that permitted binding of ATP. DNA-gp3 aggregates were produced, and the hydrolysis of ATP accompanied DNA-gp3 packaging. Binding and hydrolysis of ATP by gp16 was both prohead- and DNA-gp3-dependent. Interruption of packaging by DNase I addition revealed filled heads but few particles containing partial lengths of DNA, suggesting that following a rate-limiting initiation, the translocation of DNA-gp3 into the prohead was much faster in the defined in-vitro system than in extracts.     

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: oriented and quantized in vitro packaging of DNA protein gp3.

The assembly of phage phi 29 occurs by a single pathway, and the DNA protein (DNA-gp3) of "packaging intermediates" can be obtained after DNase I interruption of in vitro complementation. A broad spectrum of DNA molecules of variable length was isolated from DNase I-treated proheads. Restriction endonuclease EcoRI digestion and electrophoretic analysis of these DNA molecules suggested that DNA-gp3 packaging was oriented with respect to the physical map and was a complex process. Proteinase K-treated exogenous DNA was not packaged. When exogenous DNA-gp3 was predigested with the restriction endonucleases BstEII. EcoRI, HpaI, and HpaII, the left-end fragments, ranging in size from 8 to 0.9 megadaltons, were selectively and efficiently packaged. During in vivo and in vitro assembly, DNA-gp3 is packaged into proheads, the "core-scaffolding" protein gp7 exits from the particles, and the DNA-filled heads assume the angular morphology of phage phi 29. The packaging of a 4.1-megadalton DNA-gp3 left-end fragment (one third of the genome) resulted in the exit of gp7 and the transition to angularity.     

Prohead and DNA-gp3-dependent ATPase activity of the DNA packaging protein gp16 of bacteriophage phi 29

The ATPase activity of the DNA packaging protein gp16 (gene product 16) of bacteriophage phi 29 was studied in the completely defined in-vitro assembly system. ATP was hydrolyzed to ADP and Pi in the packaging reaction that included purified proheads, DNA-gp3 and gp16. Approximately one molecule of ATP was used in the packaging of 2 base-pairs of phi 29 DNA, or 9 X 10(3) ATP molecules per virion. The hydrolysis of ATP by gp16 was both prohead and DNA-gp3 dependent. gp16 contained both the "A-type" and the "B-type" ATP-binding consensus sequences (Walker et al., 1982) and the predicted secondary structure for ATP binding. The A-type sequence of gp16 was "basic-hydrophobic region-G-X2-G-X-G-K-S-X7-hydrophobic", and similar sequences were found in the phage DNA packaging proteins gpA of lambda, gp19 of T7 and gp17 of T4. Having both the ATP-binding and potential magnesium-binding domains, all of these proteins probably function as ATPases and may have common prohead-binding capabilities. The phi 29 protein gp3, covalently bound to the DNA, may be analogous in function to proteins gpNul of lambda and gpl of phi 21 that bind the DNA.     

Role of RNA in bacteriophage phi 29 DNA packaging

A novel bacteriophage phi 29 RNA of 174 nucleotides is essential for the in vitro packaging of the DNA-terminal protein complex into proheads. The RNA, bound to the prohead portal vertex (connector), participates in assembly and function of the DNA translocating ATPase and in recognition of the DNA left-end during the course of the packaging reaction. The RNA is present in related phages and varies widely in primary sequence, but its secondary structure, as deduced by phylogenetic analysis, is both highly conserved and unique among small RNAs.     

Alanine scanning and Fe-BABE probing of the bacteriophage ø29 prohead RNA-connector interaction

The DNA packaging motor of the Bacillus subtilis bacteriophage ?29 prohead is comprised in part of an oligomeric ring of 174 base RNA molecules (pRNA) positioned near the N termini of subunits of the dodecameric head-tail connector. Deletion and alanine substitution mutants in the connector protein (gp10) N terminus were assembled into proheads in Escherichia coli and the particles tested for pRNA binding and DNA-gp3 packaging in vitro. The basic amino acid residues RKR at positions 3-5 of the gp10 N terminus were central to pRNA binding during assembly of an active DNA packaging motor. Conjugation of iron(S)-1-(p-bromoacetamidobenzyl) ethylenediaminetetraacetate (Fe-BABE) to residue S170C in the narrow end of the connector, near the N terminus, permitted hydroxyl radical probing of bound [(32)P]pRNA and identified two discrete sites proximal to this residue: the C-helix at the junction of the A, C and D helices, and the E helix and the CE loop/D loop of the intermolecular base pairing site.     

cis-acting elements required for efficient packaging of brome mosaic virus RNA3 in barley protoplasts

Brome mosaic virus (BMV) is a positive-sense RNA plant virus, the tripartite genomic RNAs of which are separately packaged into virions. RNA3 is copackaged with subgenomic RNA4. In barley protoplasts coinoculated with RNA1 and RNA2, an RNA3 mutant with a 69-nucleotide (nt) deletion in the 3'-proximal region of the 3a open reading frame (ORF) was very poorly packaged compared with other RNA3 mutants and wild-type RNA3, despite their comparable accumulation in the absence of coat protein. Computer analysis of RNA secondary structure predicted two stem-loop (SL) structures (i.e., SL-I and SL-II) in the 69-nt region. Disruption of SL-II, but not of SL-I, significantly reduced RNA3 packaging. A chimeric BMV RNA3 (B3Cmp), with the BMV 3a ORF replacing that of cucumber mosaic virus (CMV), was packaged negligibly, whereas RNA4 was packaged efficiently. Replacement of the 3'-proximal region of the CMV 3a ORF in B3Cmp with the 3'-proximal region of the BMV 3a ORF significantly improved packaging efficiency, and the disruption of SL-II in the substituted BMV 3a ORF region greatly reduced packaging efficiency. These results suggest that the 3'-proximal region of the BMV 3a ORF, especially SL-II predicted between nt 904 and 933, plays an important role in the packaging of BMV RNA3 in vivo. Furthermore, the efficient packaging of RNA4 without RNA3 in B3Cmp-infected cells implies the presence of an element in the 3a ORF of BMV RNA3 that regulates the copackaging of RNA3 and RNA4.     

Selection and characterization of randomly produced mutants in the gene coding for M1 RNA

The gene for M1 RNA, the catalytic subunit of RNase P of Escherichia coli, was subjected to random chemical mutagenesis in vitro. Mutations were selected by electrophoresis in denaturing gradient gels. Twenty-seven different mutants of the gene for M1 RNA were selected, and in 24 cases the mutations were identified as single base substitutions. The mutant forms of M1 RNA were analyzed in vitro for catalytic activity in the absence and in the presence of the protein subunit of RNase P (C5 protein). The structure of mutant RNAs was probed by limited digestion with ribonuclease T1; a correlation between reduced catalytic activity of mutant M1 RNAs and perturbations in secondary and tertiary structure was noted in many cases. The results indicate the involvement of specific regions of the M1 RNA molecule in the catalytic function of RNase P, in the binding of the C5 protein, and in substrate binding.     

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: prohead restoration for DNA-gp3 packaging and assembly.

The DNA-protein complex DNA-gp3 of phi 29 is efficiently packaged into purified proheads with the aid of plasmid-derived gp16. The filled heads can be assembled to phage by addition of an extract providing the products for neck-tail assembly (Bjornsti et al., J. Virol. 50:766-772, 1984). However, purified proheads lost their competence to package DNA-gp3 upon storage for 2 months at 4 degrees C. Competence was restored by complementation with extracts of certain mutant-infected cells, and these experiments demonstrated that late proteins were not involved; restoration obtained with 4-8-14--infected cells was indistinguishable from that obtained with 7-8-14--infected cells. 2-8-14- and 3-8-14- extracts restored about one-third of the capacity to package exogenous DNA-gp3. A 1-8-14- extracts restored activity to package 20.6% of the DNA-gp3 added, but phage were not produced.     

Translation of the flavivirus kunjin NS3 gene in cis but not its RNA sequence or secondary structure is essential for efficient RNA packaging

Our previous studies using trans-complementation analysis of Kunjin virus (KUN) full-length cDNA clones harboring in-frame deletions in the NS3 gene demonstrated the inability of these defective complemented RNAs to be packaged into virus particles (W. J. Liu, P. L. Sedlak, N. Kondratieva, and A. A. Khromykh, J. Virol. 76:10766-10775). In this study we aimed to establish whether this requirement for NS3 in RNA packaging is determined by the secondary RNA structure of the NS3 gene or by the essential role of the translated NS3 gene product. Multiple silent mutations of three computer-predicted stable RNA structures in the NS3 coding region of KUN replicon RNA aimed at disrupting RNA secondary structure without affecting amino acid sequence did not affect RNA replication and packaging into virus-like particles in the packaging cell line, thus demonstrating that the predicted conserved RNA structures in the NS3 gene do not play a role in RNA replication and/or packaging. In contrast, double frameshift mutations in the NS3 coding region of full-length KUN RNA, producing scrambled NS3 protein but retaining secondary RNA structure, resulted in the loss of ability of these defective RNAs to be packaged into virus particles in complementation experiments in KUN replicon-expressing cells. Furthermore, the more robust complementation-packaging system based on established stable cell lines producing large amounts of complemented replicating NS3-deficient replicon RNAs and infection with KUN virus to provide structural proteins also failed to detect any secreted virus-like particles containing packaged NS3-deficient replicon RNAs. These results have now firmly established the requirement of KUN NS3 protein translated in cis for genome packaging into virus particles.     

Effects of amino-acid substitutions in the Brome mosaic virus capsid protein on RNA encapsidation

Brome mosaic virus (BMV) packages its genomic RNAs (RNA1, RNA2, and RNA3) and subgenomic RNA4 into three different particles. However, since the RNAs in the virions have distinct lengths and electrostatic charges, we hypothesize that subsets of the virions should have distinct properties. A glutamine to cysteine substitution at position 120 of the capsid protein (CP) was found to result in a mutant virus named QC that exhibited a dramatically altered ratio of the RNAs in virions. RNA2 was far more abundant than the other RNAs, although the ratios could be affected by the host plant species. RNAs with the QC mutation were competent for replication early in the infection, suggesting that they were either selectively packaged or degraded after packaging. In support of the latter idea, low concentrations of truncated RNA1 that co-migrated with RNA2 were found in the QC virions. Spectroscopic analysis and peptide fingerprinting experiments showed that the QC virus capsid interacted with the encapsidated RNAs differently than did the wild type. Furthermore, wild-type BMV RNA1 was found to be more susceptible to nuclease digestion relative to RNA2 as a function of the buffer pH. Other BMV capsid mutants also had altered ratios of packaged RNAs.     

Identification and characterization of a coronavirus packaging signal.

Previously, a mouse hepatitis virus (MHV) genomic sequence necessary for defective interfering (DI) RNA packaging into MHV particles (packaging signal) was mapped to within a region of 1,480 nucleotides in the MHV polymerase gene by comparison of two DI RNAs. One of these, DIssF, is 3.6 kb in size and exhibits efficient packaging, whereas the other, DIssE, which is 2.3 kb, does not. For more precise mapping, a series of mutant DIssF RNAs with deletions within this 1,480-nucleotide region were constructed. After transfection of in vitro-synthesized mutant DI RNA in MHV-infected cells, the virus product was passaged several times. The efficiency of DI RNA packaging into MHV virions was then estimated by viral homologous interference activity and by analysis of intracellular virus-specific RNAs and virion RNA. The results indicated that an area of 190 nucleotides was necessary for packaging. A computer-generated secondary structural analysis of the A59 and JHM strains of MHV demonstrated that within this 190-nucleotide region a stable stem-loop of 69 nucleotides was common between the two viruses. A DIssE-derived DI DNA which had these 69 nucleotides inserted into the DIssE sequence demonstrated efficient DI RNA packaging. Site-directed mutagenic analysis showed that of these 69 nucleotides, the minimum sequence of the packaging signal was 61 nucleotides and that destruction of the secondary structure abolished packaging ability. These studies demonstrated that an MHV packaging signal was present within the 61 nucleotides, which are located on MHV genomic RNA 1,381 to 1,441 nucleotides upstream of the 3' end of gene 1.     

RNA-mediated specificity of DNA packaging into hybrid lambda/phi 29 proheads.

A small RNA (pRNA, 174 nt) is known to be essential for DNA packaging in bacteriophage phi 29. However, in an in vitro DNA packaging system based on hybrid lambda/phi 29 proheads (made up of head proteins from phage lambda and connectors from phage phi 29), the specificity of DNA packaging is lost, and different RNA molecules fulfil the requirements for DNA packaging, albeit with less efficiency than phi 29 pRNA. Competition assays with RNAs from different sources have shown that phi 29 connectors bind preferentially pRNA. An increase in the efficiency of phi 29 DNA packaging into hybrid proheads induced by phi 29 pRNA is observed because, when phi 29 pRNA is incubated with hybrid proheads, phi 29 DNA is packaged more efficiently than other DNAs of similar length. Furthermore, when hybrid proheads carrying phi 29 pRNA are incubated with a mixture of DNAs from different sources, phi 29 DNA is selectively packaged, thus indicating that phi 29 pRNA determines the specificity of DNA packaging.     

Viral escape from antisense RNA

RNA coliphage SP was propagated for several generations on a host expressing an inhibitory antisense RNA complementary to bases 31–270 of the positive-stranded genome. Phages evolved that escaped inhibition. Typically, these escape mutants contained 3–4 base substitutions, but different sequences were observed among different isolates. The mutations were located within three different types of structural features within the predicted secondary structure of SP genomic RNA: (i) hairpin loops; (ii) hairpin stems; and (iii) the 5' region of the phage genome complementary to the antisense molecule. Computer modelling of the mutant genomic RNAs showed that all of the substitutions within hairpin stems improved the Watson–Crick pairing of the stem. No major structural rearrangements were predicted for any of the mutant genomes, and most substitutions in coding regions did not alter the amino acid sequence. Although the evolved phage populations were polymorphic for substitutions, many substitutions appeared independently in two selected lines. The creation of a new, perfect, antisense RNA against an escape mutant resulted in the inhibition of that mutant but not of other escape mutants nor of the ancestral, unevolved phage. Thus, at least in this system, a population of viruses that evolved to escape from a single antisense RNA would require a cocktail of several antisense RNAs for inhibition.     

Lead-catalyzed cleavage of ribonuclease P RNA as a probe for integrity of tertiary structure.

Pb(2+)-catalyzed cleavage of RNA has been shown previously to be a useful probe for tertiary structure. In the present study, Pb2+ cleavage patterns were identified for ribonuclease P RNAs from three phylogenetically disparate organisms, Escherichia coli, Chromatium vinosum, Bacillus subtilis, and for E. coli RNase P RNAs that had been altered by deletions. Each of the native RNAs undergoes cleavage at several sites in the core structure that is common to all bacterial RNase P RNAs. All the cleavages occur in non-paired regions of the secondary structure models of the RNAs, in regions likely to be involved in tertiary interactions. Two cleavage sites occur at homologous positions in all the native RNAs, regardless of sequence variation, suggesting common tertiary structural features. The Pb2+ cleavage sites in four deletion mutants of E. coli RNase P RNA differed from the native pattern, indicating alterations in the tertiary structures of the mutant RNAs. This conclusion is consistent with previously characterized properties of the mutant RNAs. The Pb2+ cleavage assay is thus a useful probe to reveal alteration of tertiary structure in RNase P RNA.     

A base-paired structure in the avian sarcoma virus 5' leader is required for efficient encapsidation of RNA.

Selective encapsidation of avian sarcoma-leukosis virus genomic RNA within virions requires recognition of a cis-acting signal (termed psi) located in the 5' leader of the RNA between the primer binding site and the splice donor site. Computer analyses indicate the potential for numerous secondary structure interactions within this region, including alternative conformations with similar free energy levels. We have constructed mutations designed to disrupt and restore potential secondary structure interactions within psi to investigate the role of these structures in RNA packaging. To test for the ability of psi mutants to package a heterologous reporter gene into virions, chimeric constructs bearing avian sarcoma virus 5' sequences fused to lacZ were transiently cotransfected with a nonpackageable helper construct into chicken embryo fibroblasts. lacZ virions produced from cotransfected cells were used to infect new cultures of chicken embryo fibroblasts, and then an in situ assay for individual cells expressing lacZ was done. Results obtained with this assay were confirmed in direct analyses of isolated virion RNA by RNase protection assays. Two mutations, predicted to disrupt a potential stem structure forming between elements located at nucleotides 160 to 167 and 227 to 234, severely inhibited packaging when either element was mutated. A construct in which these mutations were combined to restore potential base pairing between the two elements displayed a partially restored packaging phenotype. These results strongly suggest that the structure, referred to as the O3 stem, is required for efficient encapsidation of avian sarcoma virus RNA. Site-directed mutagenesis of additional sequence elements located in the O3 loop reduced packaging as measured by the indirect assay, suggesting that these sequences may also be components of the encapsidation signal. The possible implications of the O3 stem structure with regard to translation of avian sarcoma-leukosis virus short upstream open reading frames are discussed.