中国小球藻病毒及其分子生物学性质

以小球藻NC64A株系为寄主,从17个省市采集的上百个水样中分离到了11个病毒分离物（BJ－1、BJ－2、BJ－3、BJ－4、FJ－1、FJ－2、NJ－1、HCJ－1、CDT－1、SCB—1、SCC－1）。这些病毒具有许多相同的性质,如均为球形多面体,基因组为300kb的dsDNA。但它们的DNA限制性酶切图谱,碱基组成和蛋白组分等均有差异。FJ－1的主要外壳蛋白的分子量小于54000,其它10个分离物则与PBCV-1一样,主要外壳蛋白的分子量为54000。Westernblot分析的结果显示,除FJ－1外其它病毒分离物与PBCV—1的抗血清有较强的免疫交叉反应。说明这些病毒与PBCV－1的同源性较高。在11个病毒分离物中,FJ－1在蛋白组分、碱基组成等方面与其它分离物和PBCV—1差别较大。     

Modulation of poliovirus replicative fitness in HeLa cells by deoptimization of synonymous codon usage in the capsid region

We replaced degenerate codons for nine amino acids within the capsid region of the Sabin type 2 oral poliovirus vaccine strain with corresponding nonpreferred synonymous codons. Codon replacements were introduced into four contiguous intervals spanning 97% of the capsid region. In the capsid region of the most highly modified virus construct, the effective number of codons used (N(C)) fell from 56.2 to 29.8, the number of CG dinucleotides rose from 97 to 302, and the G+C content increased from 48.4% to 56.4%. Replicative fitness in HeLa cells, measured by plaque areas and virus yields in single-step growth experiments, decreased in proportion to the number of replacement codons. Plaque areas decreased over an approximately 10-fold range, and virus yields decreased over an approximately 65-fold range. Perhaps unexpectedly, the synthesis and processing of viral proteins appeared to be largely unaltered by the restriction in codon usage. In contrast, total yields of viral RNA in infected cells were reduced approximately 3-fold and specific infectivities of purified virions (measured by particle/PFU ratios) decreased approximately 18-fold in the most highly modified virus. The replicative fitness of both codon replacement viruses and unmodified viruses increased with the passage number in HeLa cells. After 25 serial passages (approximately 50 replication cycles), most codon replacements were retained, and the relative fitness of the modified viruses remained well below that of the unmodified virus. The increased replicative fitness of high-passage modified virus was associated with the elimination of several CG dinucleotides. Potential applications for the systematic modulation of poliovirus replicative fitness by deoptimization of codon usage are discussed.     

Modulation of signaling pathways by RNA virus capsid proteins

Capsid proteins are structural components of virus particles. They are nucleic acid-binding proteins whose main recognized function is to package viral genomes into protective structures called nucleocapsids. Research over the last 10 years indicates that in addition to their role as genome guardians, viral capsid proteins modulate host cell signaling networks. Disruption or alteration of intracellular signaling pathways by viral capsids may benefit replication of the virus by affecting innate immunity and in some cases, may underlie disease progression. In this review, we describe how the capsid proteins from medically relevant RNA viruses interact with host cell signaling pathways.     

Culture-Independent Evaluation of Nonenveloped-Virus Infectivity Reduced by Free-Chlorine Disinfection

The inability of molecular detection methods to distinguish disinfected virions from infectious ones has hampered the assessment of infectivity for enteric viruses caused by disinfection practices. In the present study, the reduction of infectivity of murine norovirus S7-PP3 and mengovirus vMC0, surrogates of human noroviruses and enteroviruses, respectively, caused by free-chlorine treatment was characterized culture independently by detecting carbonyl groups on viral capsid protein. The amount of carbonyls on viral capsid protein was evaluated by the proportion of biotinylated virions trapped by avidin-immobilized gel (percent adsorbed). This culture-independent approach demonstrated that the percent adsorbed was significantly correlated with the logarithm of the infectious titer of tested viruses. Taken together with the results of previous reports, the result obtained in this study indicates that the amount of carbonyls on viral capsid protein of four important families of waterborne pathogenic viruses, Astroviridae, Reoviridae, Caliciviridae, and Picornaviridae, is increased in proportion to the received oxidative stress of free chlorine. There was also a significant correlation between the percent adsorbed and the logarithm of the ratio of genome copy number to PFU, which enables estimation of the infectious titer of a subject virus by measuring values of the total genome copy number and the percent adsorbed. The proposed method is applicable when the validation of a 4-log reduction of viruses, a requirement in U.S. EPA guidelines for virus removal from water, is needed along with clear evidence of the oxidation of virus particles with chlorine-based disinfectants.     

Diverse viruses of marine archaea discovered using metagenomics

During the past decade, metagenomics became a method of choice for the discovery of novel viruses. However, host assignment for uncultured viruses remains challenging, especially for archaeal viruses, which are grossly undersampled compared to viruses of bacteria and eukaryotes. Here, we assessed the utility of CRISPR spacer targeting, tRNA gene matching and homology searches for viral signature proteins, such as major capsid proteins, for the assignment of archaeal hosts and validated these approaches on metaviromes from Yangshan Harbor (YSH). We report 35 new genomes of viruses which could be confidently assigned to hosts representing diverse lineages of marine archaea. We show that the archaeal YSH virome is highly diverse, with some viruses enriching the previously described virus groups, such as magroviruses of Marine Group II Archaea (Poseidoniales), and others representing novel groups of marine archaeal viruses. Metagenomic recruitment of Tara Oceans datasets on the YSH viral genomes demonstrated the presence of YSH Poseidoniales and Nitrososphaeria viruses in the global oceans, but also revealed the endemic YSH-specific viral lineages. Furthermore, our results highlight the relationship between the soil and marine thaumarchaeal viruses. We propose three new families within the class Caudoviricetes for the classification of the five complete viral genomes predicted to replicate in marine Poseidoniales and Nitrososphaeria, two ecologically important and widespread archaeal groups. This study illustrates the utility of viral metagenomics in exploring the archaeal virome and provides new insights into the diversity, distribution and evolution of marine archaeal viruses.     

Morphological Characterization of Viruses in the Stratified Water Column of Alkaline, Hypersaline Mono Lake

Concentrations of viruses and prokaryotes in the alkaline, moderately hypersaline, seasonally stratified Mono Lake are among the highest reported for a natural aquatic environment. We used electron microscopy to test whether viral morphological characteristics differed among the epilimnion, metalimnion, and the anoxic hypolimnion of the lake and to determine how the properties of viruses in Mono Lake compare to other aquatic environments. Viral capsid size distributions were more similar in the metalimnion and hypolimnion of Mono Lake, while viral tail lengths were more similar in the epilimnion and metalimnion. The percentage of tailed viruses decreased with depth and the relative percentages of tailed phage families changed with depth. The presence of large (>125 nm capsid), untailed viruses in the metalimnion and hypolimnion suggests that eukaryotic viruses are produced in these suboxic and anoxic, hypersaline environments. Capsid diameters of viruses were larger on average in Mono Lake compared to other aquatic environments, and no lemon-shaped or filamentous viruses were found, in contrast to other high-salinity or high-altitude lakes and seas. Our data suggest that the physically and chemically distinct layers of Mono Lake harbor different viral assemblages, and that these assemblages are distinct from other aquatic environments that have been studied. Furthermore, we found that filtration of a sample through a 0.22-μm pore-size filter significantly altered the distribution of viral capsid diameters and tail lengths, resulting in a relative depletion of viruses having larger capsids and longer tails. This observation highlights the potential for bias in molecular surveys of viral diversity, which typically rely on filtration through 0.2- or 0.22-μm pore-size membrane filters to remove bacteria during sample preparation.     

The icosahedral RNA virus as a grotto: organizing the genome into stalagmites and stalactites

There are two important problems in the assembly of small, icosahedral RNA viruses. First, how does the capsid protein select the viral RNA for packaging, when there are so many other candidate RNA molecules available? Second, what is the mechanism of assembly? With regard to the first question, there are a number of cases where a particular RNA sequence or structure—often one or more stem-loops—either promotes assembly or is required for assembly, but there are others where specific packaging signals are apparently not required. With regard to the assembly pathway, in those cases where stem-loops are involved, the first step is generally believed to be binding of the capsid proteins to these “fingers” of the RNA secondary structure. In the mature virus, the core of the RNA would then occupy the center of the viral particle, and the stem-loops would reach outward, towards the capsid, like stalagmites reaching up from the floor of a grotto towards the ceiling. Those viruses whose assembly does not depend on protein binding to stem-loops could have a different structure, with the core of the RNA lying just under the capsid, and the fingers reaching down into the interior of the virus, like stalactites. We review the literature on these alternative structures, focusing on RNA selectivity and the assembly mechanism, and we propose experiments aimed at determining, in a given virus, which of the two structures actually occurs.     

Electrostatic interaction between RNA and protein capsid in cowpea chlorotic mottle virus simulated by a coarse-grain RNA model and a Monte Carlo approach

Although many viruses have been crystallized and the protein capsid structures have been determined by x-ray crystallography, the nucleic acids often cannot be resolved. This is especially true for RNA viruses. The lack of information about the conformation of DNA/RNA greatly hinders our understanding of the assembly mechanism of various viruses. Here we combine a coarse-grain model and a Monte Carlo method to simulate the distribution of viral RNA inside the capsid of cowpea chlorotic mottle virus. Our results show that there is very strong interaction between the N-terminal residues of the capsid proteins, which are highly positive charged, and the viral RNA. Without these residues, the binding energy disfavors the binding of RNA by the capsid. The RNA forms a shell close to the capsid with the highest densities associated with the capsid dimers. These high-density regions are connected to each other in the shape of a continuous net of triangles. The overall icosahedral shape of the net overlaps with the capsid subunit icosahedral organization. Medium density of RNA is found under the pentamers of the capsid. These findings are consistent with experimental observations.     

Human cytomegalovirus (HCMV) smallest capsid protein identified as product of short open reading frame located between HCMV UL48 and UL49.

The capsid of cytomegalovirus contains an abundant, low-molecular-weight protein whose coding sequence within the viral genome had not been identified. We have used a combination of biochemical and immunological techniques to demonstrate that this protein, called the smallest capsid protein in human cytomegalovirus, is encoded by a previously unidentified 225-bp open reading frame (ORF) located between ORFs UL48 and UL49. This short ORF, called UL48/49, is the positional homolog of herpes simplex virus ORF UL35 (encoding capsid protein VP26) and shows partial amino acid sequence identity to positional homologs in human herpes viruses 6 and 7.     

Structural organisation of the head-to-tail interface of a bacterial virus

In tailed icosahedral bacteriophages the connection between the 5-fold symmetric environment of the portal vertex in the capsid and the 6-fold symmetric phage tail is formed by a complex interface structure. The current study provides the detailed analysis of the assembly and structural organisation of such an interface within a phage having a long tail. The region of the interface assembled as part of the viral capsid (connector) was purified from DNA-filled capsids of the Bacillus subtilis bacteriophage SPP1. It is composed of oligomers of gp6, the SPP1 portal protein, of gp15, and of gp16. The SPP1 connector structure is formed by a mushroom-like portal protein whose cap faces the interior of the viral capsid in intact virions, an annular structure below the stem of the mushroom, and a second narrower annulus that is in direct contact with the helical tail extremity. The layered arrangement correlates to the stacking of gp6, gp15, and gp16 on top of the tail. The gp16 ring is exposed to the virion outside. During SPP1 morphogenesis, gp6 participates in the procapsid assembly reaction, an early step in the assembly pathway, while gp15 and gp16 bind to the capsid portal vertex after viral chromosome encapsidation. gp16 is processed during or after tail attachment to the connector region. The portal protein gp6 has 12-fold cyclical symmetry in the connector structure, whereas assembly-na?ve gp6 exhibits 13-fold symmetry. We propose that it is the interaction of gp6 with other viral morphogenetic proteins that drives its assembly into the 12-mer state.     

Infectious bursal disease virus capsid assembly and maturation by structural rearrangements of a transient molecular switch

Infectious bursal disease virus (IBDV), a double-stranded RNA (dsRNA) virus belonging to the Birnaviridae family, is an economically important avian pathogen. The IBDV capsid is based on a single-shelled T=13 lattice, and the only structural subunits are VP2 trimers. During capsid assembly, VP2 is synthesized as a protein precursor, called pVP2, whose 71-residue C-terminal end is proteolytically processed. The conformational flexibility of pVP2 is due to an amphipathic alpha-helix located at its C-terminal end. VP3, the other IBDV major structural protein that accomplishes numerous roles during the viral cycle, acts as a scaffolding protein required for assembly control. Here we address the molecular mechanism that defines the multimeric state of the capsid protein as hexamers or pentamers. We used a combination of three-dimensional cryo-electron microscopy maps at or close to subnanometer resolution with atomic models. Our studies suggest that the key polypeptide element, the C-terminal amphipathic alpha-helix, which acts as a transient conformational switch, is bound to the flexible VP2 C-terminal end. In addition, capsid protein oligomerization is also controlled by the progressive trimming of its C-terminal domain. The coordination of these molecular events correlates viral capsid assembly with different conformations of the amphipathic alpha-helix in the precursor capsid, as a five-alpha-helix bundle at the pentamers or an open star-like conformation at the hexamers. These results, reminiscent of the assembly pathway of positive single-stranded RNA viruses, such as nodavirus and tetravirus, add new insights into the evolutionary relationships of dsRNA viruses.     

Thermodynamic characterization of viral procapsid expansion into a functional capsid shell

The assembly of "complex" DNA viruses such as the herpesviruses and many tailed bacteriophages includes a DNA packaging step where the viral genome is inserted into a preformed procapsid shell. Packaging triggers a remarkable capsid expansion transition that results in thinning of the shell and an increase in capsid volume to accept the full-length genome. This transition is considered irreversible; however, here we demonstrate that the phage λ procapsid can be expanded with urea in vitro and that the transition is fully reversible. This provides an unprecedented opportunity to evaluate the thermodynamic features of this fascinating and essential step in virus assembly. We show that urea-triggered expansion is highly cooperative and strongly temperature dependent. Thermodynamic analysis indicates that the free energy of expansion is influenced by magnesium concentration (3-13?kcal/mol in the presence of 0.2-10?mM Mg(2+)) and that significant hydrophobic surface area is exposed in the expanded shell. Conversely, Mg(2+) drives the expanded shell back to the procapsid conformation in a highly cooperative transition that is also temperature dependent and strongly influenced by urea. We demonstrate that the gpD decoration protein adds to the urea-expanded capsid, presumably at hydrophobic patches exposed at the 3-fold axes of the expanded capsid lattice. The decorated capsid is biologically active and sponsors packaging of the viral genome in vitro. The roles of divalent metal and hydrophobic interactions in controlling packaging-triggered expansion of the procapsid shell are discussed in relation to a general mechanism for DNA-triggered procapsid expansion in the complex double-stranded DNA viruses.     

Functional aspects of the capsid structure of Mengo virus

The three-dimensional structure of the Mengo virus capsid has been determined at a resolution of 3.0 A. This achievement is discussed in an historical context, and the general features of picornavirus capsid design are presented. The dynamic functional aspects of the Mengo virus capsid--namely its ability to interact with specific receptors on host cells, to dissociate and release the viral genomic RNA into the cellular cytoplasm, to assemble with progeny RNA molecules and form new virions, and to alter its external surface in order to evade neutralization by circulating antibodies--are discussed. Comparisons with other picornaviruses whose capsid structures have also been elucidated (poliovirus serotype 1 and 3, human rhinovirus types 14 and 1A, and foot-and-mouth disease virus type O) illustrate both the similarities and the distinctive features of capsid design found within this family of mammalian viruses.     

A domain of the hepadnavirus capsid protein is specifically required for DNA maturation and virus assembly

Mutations introduced into the capsid gene of duck hepatitis B virus (DHBV) were tested for their effects on viral DNA synthesis and assembly of enveloped viruses. Four classes of mutant phenotypes were observed among a series of deletions of covering the 3' end of the capsid open reading frame. Class I mutant capsids were able to support normal single-stranded and relaxed circular viral DNA synthesis; class II mutant capsids supported normal single-stranded DNA synthesis but not relaxed circular DNA synthesis; class III mutant capsids resembled class II capsids, but viral DNA synthesis was inhibited 5- to 10-fold; and class IV capsids were severely restricted in their ability to support viral DNA synthesis. Class I capsids were assembled into enveloped virions, but class II, III, and IV capsids were not. Viral DNA synthesized inside class II capsids was normal with respect to minus-strand DNA initiation, plus-strand DNA initiation, and circularization of the DNA, but plus strands failed to be elongated to mature 3-kb DNA. The results suggest that a function of the capsid protein specifically required for viral DNA maturation is also required for assembly of nucleocapsids into envelopes. Thus, class II mutants appear to be defective in the appearance of the "packaging signal" for virus assembly (J. Summers and W. Mason, Cell 29:403-415, 1982).     

A single amino acid change determines persistence of a chimeric Theiler's virus.

The DA strain of Theiler's virus persists in the central nervous system of mice and causes chronic inflammation and demyelination. On the other hand, the GDVII strain causes an acute encephalitis and does not persist in surviving animals. Series of recombinants between infectious cDNA clones of the genomes of DA and GDVII viruses have been constructed. The analysis of the phenotypes of the recombinant viruses has shown that determinants of persistence and demyelination are present in the capsid proteins of DA virus. Chimeric viruses constructed by the different research groups gave consistent results, with one exception. Chimeras GD1B-2A/DAFL3 and GD1B-2C/DAFL3, which contain part of capsid protein VP2, capsid proteins VP3 and VP1, and different portions of P2 of GDVII in a DA background, were able to persist and cause demyelination. Chimera R4, whose genetic map is identical to that of GD1B-2A/DAFL3, was not. After exchanging the viral chimeras between laboratories and verifying each other's observations, new chimeras were generated in order to explain this difference. Here we report that the discrepancy can be attributed to a single amino acid difference in the sequence of the capsid protein VP2 of the two parental DA strains. DAFL3 (University of Chicago) and the chimeras derived from it, GD1B-2A/DAFL3 and GD1B-2C/DAFL3, contain a Lys at position 141, while TMDA (Institut Pasteur) and R4, the chimera derived from it, contain an Asn in that position. This amino acid is located at the tip of the EF loop, on the rim of the depression spanning the twofold axis of the capsid. These results show that a single amino acid change can confer the ability to persist and demyelinate to a chimeric Theiler's virus, and they pinpoint a region of the viral capsid that is important for this phenotype.     

Structure of an insect parvovirus (Junonia coenia Densovirus) determined by cryo-electron microscopy

Junonia coenia densovirus (JcDNV) belongs to the densovirus genus of the Parvoviridae family and infects the larvae of the Common Buckeye butterfly. Its capsid is icosahedral and consists of viral proteins VP1 (88 kDa), VP2 (58 kDa), VP3 (52 kDa) and VP4 (47 kDa). Each viral protein has the same C terminus but differs in the length of its N-terminal extension. Virus-like-particles (VLPs) assemble spontaneously when the individual viral proteins are expressed by a recombinant baculovirus. We present here the structure of native JcDNV at 8.7A resolution and of the two VLPs formed essentially from VP2 and VP4 at 17 A resolution, as determined by cryo-electron microscopy. The capsid displays a remarkably smooth surface, with only two very small spikes that define a pentagonal plateau on the 5-fold axes. JcDNV is very closely related to Galleria mellonella densovirus (GmDNV), whose structure is known (94% sequence identity with VP4 and 96% similarity). We compare these structures in order to locate the structural changes and mutations that may be involved in the species shift of these densoviruses. A single mutation at the tip of one of the two small spikes is a strong candidate as a species shift determinant. Difference imaging reveals that the 21 disordered amino acid residues at the N terminus of the capsid protein VP4 are located inside the capsid at the 5-fold axis, but the additional 94 amino acid residue extension of VP2 is not visible, suggesting that it is highly disordered. There is strong evidence of DNA ordering associated with the 3-fold axes of the capsid.     

Distinct DNA exit and packaging portals in the virus Acanthamoeba polyphaga mimivirus

Icosahedral double-stranded DNA viruses use a single portal for genome delivery and packaging. The extensive structural similarity revealed by such portals in diverse viruses, as well as their invariable positioning at a unique icosahedral vertex, led to the consensus that a particular, highly conserved vertex-portal architecture is essential for viral DNA translocations. Here we present an exception to this paradigm by demonstrating that genome delivery and packaging in the virus Acanthamoeba polyphaga mimivirus occur through two distinct portals. By using high-resolution techniques, including electron tomography and cryo-scanning electron microscopy, we show that Mimivirus genome delivery entails a large-scale conformational change of the capsid, whereby five icosahedral faces open up. This opening, which occurs at a unique vertex of the capsid that we coined the “stargate”, allows for the formation of a massive membrane conduit through which the viral DNA is released. A transient aperture centered at an icosahedral face distal to the DNA delivery site acts as a non-vertex DNA packaging portal. In conjunction with comparative genomic studies, our observations imply a viral packaging pathway akin to bacterial DNA segregation, which might be shared by diverse internal membrane–containing viruses.     

Distinct DNA Exit and Packaging Portals in the Virus Acanthamoeba polyphaga mimivirus

Icosahedral double-stranded DNA viruses use a single portal for genome delivery and packaging. The extensive structural similarity revealed by such portals in diverse viruses, as well as their invariable positioning at a unique icosahedral vertex, led to the consensus that a particular, highly conserved vertex-portal architecture is essential for viral DNA translocations. Here we present an exception to this paradigm by demonstrating that genome delivery and packaging in the virus Acanthamoeba polyphaga mimivirus occur through two distinct portals. By using high-resolution techniques, including electron tomography and cryo-scanning electron microscopy, we show that Mimivirus genome delivery entails a large-scale conformational change of the capsid, whereby five icosahedral faces open up. This opening, which occurs at a unique vertex of the capsid that we coined the “stargate”, allows for the formation of a massive membrane conduit through which the viral DNA is released. A transient aperture centered at an icosahedral face distal to the DNA delivery site acts as a non-vertex DNA packaging portal. In conjunction with comparative genomic studies, our observations imply a viral packaging pathway akin to bacterial DNA segregation, which might be shared by diverse internal membrane–containing viruses.