Structural properties of recombinant nonrepetitive and repetitive parts of major ampullate spidroin 1 from Euprosthenops australis: implications for fiber formation

Spider dragline silk proteins, spidroins, have a tripartite composition; a nonrepetitive N-terminal domain, a central repetitive region built up from many iterated poly-Ala and Gly rich blocks, and a C-terminal nonrepetitive domain. It is generally believed that the repetitive region forms intermolecular contacts in the silk fibers, while precise functions of the terminal domains have not been established. Herein, thermal, pH, and salt effects on the structure and aggregation and/or polymerization of recombinant N- and C-terminal domains, a repetitive segment containing four poly-Ala and Gly rich coblocks, and combinations thereof were studied. The N- and C-terminal domains have mainly alpha-helical structure, and interestingly, both form homodimers. Dimerization of the end domains allows spidroin multimerization independent of the repetitive part. Reduction of an intersubunit disulfide in the C-terminal domain lowers the thermal stability but does not affect dimerization. The repetitive region shows helical secondary structure but appears to lack stable folded structure. A protein composed of this repetitive region linked to the C-terminal domain has a mainly alpha-helical folded structure but shows an abrupt transition to beta-sheet structures upon heating. At room temperature, this protein self-assembles into macroscopic fibers within minutes. The secondary structures of none of the domains are altered by pH or salt. However, high concentrations of phosphate affect the tertiary structure and accelerate the aggregation propensity of the repetitive region. Implications of these results for dragline spidroin behavior in solution and silk fiber formation are discussed.     

Atomic force microscopy of a hybrid high-molecular-weight glutenin subunit from a transgenic hexaploid wheat

The high-molecular-weight glutenin subunits (HMW-GS) of wheat gluten in their native form are incorporated into an intermolecularly disulfide-linked, polymeric system that gives rise to the elasticity of wheat flour doughs. These protein subunits range in molecular weight from about 70 K-90 K and are made up of small N-terminal and C-terminal domains and a large central domain that consists of repeating sequences rich in glutamine, proline, and glycine. The cysteines involved in forming intra- and intermolecular disulfide bonds are found in, or close to, the N- and C-terminal domains. A model has been proposed in which the repeating sequence domain of the HMW-GS forms a rod-like beta-spiral with length near 50 nm and diameter near 2 nm. We have sought to examine this model by using noncontact atomic force microscopy (NCAFM) to image a hybrid HMW-GS in which the N-terminal domain of subunit Dy10 has replaced the N-terminal domain of subunit Dx5. This hybrid subunit, coded by a transgene overexpressed in transgenic wheat, has the unusual characteristic of forming, in vivo, not only polymeric forms, but also a monomer in which a single disulfide bond links the C-terminal domain to the N-terminal domain, replacing the two intermolecular disulfide bonds normally formed by the corresponding cysteine side chains. No such monomeric subunits have been observed in normal wheat lines, only polymeric forms. NCAFM of the native, unreduced 93 K monomer showed fibrils of varying lengths but a length of about 110 nm was particularly noticeable whereas the reduced form showed rod-like structures with a length of about 300 nm or greater. The 110 nm fibrils may represent the length of the disulfide-linked monomer, in which case they would not be in accord with the beta-spiral model, but would favor a more extended conformation for the polypeptide chain, possibly polyproline II.     

Identification and molecular characterization of a large insertion within the repetitive domain of a high-molecular-weight glutenin subunit gene from hexaploid wheat

High-molecular-weight (HMW) glutenin subunits are a particular class of wheat endosperm proteins containing a large repetitive domain flanked by two short N- and C-terminal non-repetitive regions. Deletions and insertions within the central repetitive domain has been suggested to be mainly responsible for the length variations observed for this class of proteins. Nucleotide sequence comparison of a number of HMW glutenin genes allowed the identification of small insertions or deletions within the repetitive domain. However, only indirect evidence has been produced which suggests the occurrence of substantial insertions or deletions within this region when a large variation in molecular size is present between different HMW glutenin subunits. This paper represents the first report on the molecular characterization of an unusually large insertion within the repetitive domain of a functional HMW glutenin gene. This gene is located at the Glu-D1 locus of a hexaploid wheat genotype and contains an insertion of 561 base pairs that codes for 187 amino acids corresponding to the repetitive domain of a HMW glutenin subunit encoded at the same locus. The precise location of the insertion has been identified and the molecular processes underlying such mutational events are discussed.     

The structure of a high-Mr subunit of durum-wheat (Triticum durum) gluten.

A high-Mr subunit was prepared from durum wheat (Triticum durum). Viscometric analysis showed that the molecule is rod-shaped, with molecular dimensions of about 50 nm x 1.75 nm (500 A x 17.5 A) in 0.05 M-acetic acid/0.01 M-glycine and 49 nm x 1.79 nm (490 A x 17.9 A) in aq. 50% (v/v) propan-1-ol (+/- 0.01 M-glycine) at 30 degrees C. C.d. spectroscopy in the same solvents indicated the presence of beta-turns, but little alpha-helix [7% in 50% (v/v) propan-1-ol] and no beta-sheet. However, when dissolved in trifluoroethanol the protein contains about 30% alpha-helix, and viscometric analysis gives dimensions of about 62 nm x 1.53 nm (620 A x 15.3 A). It is proposed, on the basis of these studies and previously published structural prediction, that the repetitive central domain of the high-Mr subunit forms a loose spiral based on repetitive beta-turns, whereas the shorter non-repetitive N- and C-terminal domains are alpha-helical in trifluoroethanol, but random coil in other solvents. The Mr of the high-Mr subunit determined from the intrinsic viscosity in 6.0 M-guanidinium chloride was 65,000, compared with 84,000 determined in 5.0 M-guanidinium thiocyanate. The latter value is consistent with the Mr values for related proteins whose complete amino acid sequences are known, and it was concluded that the protein is incompletely denatured in the former solvent. This was confirmed by c.d. spectroscopy in increasing concentrations (1-6 M) of guanidinium chloride.     

Structure characterization of the central repetitive domain of high molecular weight gluten proteins. II. Characterization in solution and in the dry state.

The structure of the central repetitive domain of high molecular weight HMW) wheat gluten proteins was characterized in solution and in the dry state using HMW proteins Bx6 and Bx7 and a subcloned, bacterially expressed part of the repetitive domain of HMW Dx5. Model studies of the HMW consensus peptides PGQGQQ and GYYPTSPQQ formed the basis for the data analysis (van Dijk AA et al., 1997, Protein Sci 6:637-648). In solution, the repetitive domain contained a continuous nonoverlapping series of both type I and type II II beta-turns at positions predicted from the model studies; type II beta-turns occurred at QPGQ and QQGY sequences and type I beta-turns at YPTS and SPQQ. The subcloned part of the HMW Dx5 repetitive domain sometimes migrated as two bands on SDS-PAGE; we present evidence that this may be caused by a single amino acid insertion that disturbs the regular structure of beta-turns. The type I beta-turns are lost when the protein is dried on a solid surface, probably by conversion to type II beta-turns. The homogeneous type II beta-turn distribution is compatible with the formation of a beta-spiral structure, which provides the protein with elastic properties. The beta-turns and thus the beta-spiral are stabilized by hydrogen bonds within and between turns. Reformation of this hydrogen bonding network after, e.g., mechanical disruption may be important for the elastic properties of gluten proteins.     

Molecular cloning, heterologous expression, and phylogenetic analysis of a novel y-type HMW glutenin subunit gene from the G genome of Triticum timopheevi.

A novel y-type high molecular weight (HMW) glutenin subunit gene from the G genome of Triticum timopheevi (2n=4x=28, AAGG) was isolated and characterized. Genomic DNA from accession CWI17006 was amplified and a 2200 bp fragment was obtained. Sequence analysis revealed a complete open reading frame including N- and C-terminal ends and a central repetitive domain encoding 565 amino acid residues. The molecular weight of the deduced subunit was 77,031, close to that of the x-type glutenin subunits. Its mature protein structure, however, demonstrated that it was a typical y-type HMW subunit. To our knowledge, this is the largest y-type subunit gene among Triticum genomes. The molecular structure and phylogenetic analysis assigned it to the G genome and it is the first characterized y-type HMW glutenin subunit gene from T. timopheevi. Comparative analysis and secondary structure prediction showed that the subunit possessed some unique characters, especially 2 large insertions of 45 (6 hexapeptides and a nonapeptide) and 12 (2 hexapeptides) amino acid residues that mainly contributed to its higher molecular weight and allowed more coils to be formed in its tertiary structure. Additionally, more alpha-helixes in the repeat domain of the subunit were found when compared with 3 other y-type subunits. We speculate that these structural characteristics improve the formation of gluten polymer. The novel subunit, expressed as a fusion protein in E. coli, moved more slowly in SDS-PAGE than the subunit Bx7, so it was designated Gy7*. As indicated in previous studies, increased size and more numerous coils and alpha-helixes of the repetitive domain might enhance the functional properties of HMW glutenins. Consequently, the novel Gy7* gene could have greater potential for improving wheat quality.     

Characterization of two HMW glutenin subunit genes from Taenitherum Nevski

The compositions of high molecular weight (HMW) glutenin subunits from three species of Taenitherum Nevski (TaTa, 2n = 2x = 14), Ta. caput-medusae, Ta. crinitum and Ta. asperum, were investigated by SDS-PAGE analysis. The electrophoresis mobility of the x-type HMW glutenin subunits were slower or equal to that of wheat HMW glutenin subunit Dx2, and the electrophoresis mobility of the y-type subunits were faster than that of wheat HMW glutenin subunit Dy12. Two HMW glutenin genes, designated as Tax and Tay, were isolated from Ta. crinitum, and their complete nucleotide coding sequences were determined. Sequencing and multiple sequences alignment suggested that the HMW glutenin subunits derived from Ta. crinitum had the similar structures to the HMW glutenin subunits from wheat and related species with a signal peptide, and N- and C-conservative domains flanking by a repetitive domain consisted of the repeated short peptide motifs. However, the encoding sequences of Tax and Tay had some novel modification compared with the HMW glutenin genes reported so far: (1) A short peptide with the consensus sequences of KGGSFYP, which was observed in the N-terminal of all known HMW glutenin genes, was absent in Tax; (2) There is a specified short peptide tandem of tripeptide, hexapeptide and nonapeptide and three tandem of tripeptide in the repetitive domain of Tax; (3) The amino acid residues number is 105 (an extra Q presented) but not 104 in the N-terminal of Tay, which was similar to most of y-type HMW glutenin genes from Elytrigia elongata and Crithopsis delileana. Phylogenetic analysis indicated that Tax subunit was mostly related to Ax1, Cx, Ux and Dx5, and Tay was more related to Ay, Cy and Ry.     

Molecular structures and interactions of repetitive peptides based on wheat glutenin subunits depend on chain length

Synthetic and recombinant peptide models of the central repetitive domain of the high molecular weight subunits of wheat glutenin with different numbers of the consensus repeat motifs PGQGQQ + GYYPTSLQQ (21, 45, 110, and 203 residues long) and a recombinant 58,000-Da relative molecular mass (M(r) 58,000) repetitive peptide from a single subunit (1Dx5) are studied using Fourier transform IR spectroscopy. The spectra of the dry peptides are very similar; at low water contents (<76% relative humidity) there is an increase in beta-sheet structures in all peptides. However, on further hydration the content of beta sheets decrease and more beta turns are observed. The changes during the second step of hydration are very marked in the 21 and 45 residue peptides, but they are less apparent in the longer perfect repeat peptides. In the 110 and 203 residue peptides hydration results in increased contents of intermolecular beta-sheets and less beta-turn formation. In contrast, the beta-turn content of the M(r) 58,000 peptide increases during the second hydration step. The decreased extent of structure changes with increasing chain length indicates that cumulative intermolecular interactions, in particular hydrogen bonds, are an important factor in determining the structures in the solid state. The regularity of the perfect repeat sequences in the 21, 45, 110, and 203 residue peptides may favor the formation of larger stretches of intermolecular beta sheets. In contrast, the M(r) 58,000 peptide contains imperfect repeats (in common with native glutenin subunits), which may limit its ability to form intermolecular beta sheets.     

A solution SAXS study of Borrelia burgdorferi OspA, a protein containing a single-layer beta-sheet.

The crystal structure of a soluble form of Borrelia burgdorferi outer surface protein A (OspA) complexed with the Fab fragment of a monoclonal antibody has revealed an unusual structure that has a repetitive antiparallel beta topology with a nonglobular, single layer beta-sheet connecting the globular N- and C-terminal domains. Earlier NMR studies have shown that the local structure of OspA including the single layer beta-sheet is similar to the crystal structure. Here we report a small angle X-ray scattering (SAXS) study of the global conformation of OspA in solution. The radius of gyration (Rg) and the length distribution function (P(r)) of OspA measured by SAXS in solution are nearly identical to the calculated ones from the crystal structure, respectively. The NMR and SAXS experiments complement each other to show that OspA including the central single-layer beta-sheet is a stable structure in solution, and that the OspA crystal structure represents the predominant solution conformation of the protein.     

Structure characterization of the central repetitive domain of high molecular weight gluten proteins. I. Model studies using cyclic and linear peptides.

The high molecular weight (HMW) proteins from wheat contain a repetitive domain that forms 60-80% of their sequence. The consensus peptides PGQGQQ and GYYPTSPQQ form more than 90% of the domain; both are predicted to adopt beta-turn structure. This paper describes the structural characterization of these consensus peptides and forms the basis for the structural characterization of the repetitive HMW domain, described in the companion paper. The cyclic peptides cyclo-[PGQGQQPGQGQQ] (peptide 1), cyclo-[GYYPTSPQQGA] (peptide 2), and cyclo-[PGQGQQGYYPTSPQQ] (peptide 3) were prepared using a novel synthesis route. In addition, the linear peptides (PGQGQQ)n (n = 1, 3, 5) were prepared. CD, FTIR, and NMR data demonstrated a type II beta-turn structure at QPGQ in the cyclic peptide 1 that was also observed in the linear peptides 9PGQGQQ)n. A type I beta-turn was observed at YPTS and SPQQ in peptides 2 and 3, with additional beta-turns of either type I or II at GAGY (peptide 2) and QQGY (peptide 3). The proline in YPTS showed considerable cis/trans isomerization, with up to 50% of the population in the cis-conformation; the other prolines were more than 90% in the trans conformation. The conversion from trans to cis destroys the type I beta-turn at YPTS, but leads to an increase in turn character at SPQQ and GAGY (peptide 2) or QQGY (peptide 3).     

Hydrogen-bonded turns in proteins: the case for a recount

Beta-turns are sites at which proteins change their overall chain direction, and they occur with high frequency in globular proteins. The Protein Data Bank has many instances of conformations that resemble beta-turns but lack the characteristic N-H(i) --> O=C(i - 3) hydrogen bond of an authentic beta-turn. Here, we identify potential hydrogen-bonded beta-turns in the coil library, a Web-accessible database utility comprised of all residues not in repetitive secondary structure, neither alpha-helix nor beta-sheet (http://www.roselab.jhu.edu/coil). In particular, candidate turns were identified as four-residue segments satisfying highly relaxed geometric criteria but lacking a strictly defined hydrogen bond. Such candidates were then subjected to a minimization protocol to determine whether slight changes in torsion angles are sufficient to shift the conformation into reference-quality geometry without deviating significantly from the original structure. This approach of applying constrained minimization to known structures reveals a substantial population of previously unidentified, stringently defined, hydrogen-bonded beta-turns. In particular, 33% of coil library residues were classified as beta-turns prior to minimization. After minimization, 45% of such residues could be classified as beta-turns, with another 8% in 3(10) helixes (which closely resemble type III beta-turns). Of the remaining coil library residues, 37% have backbone dihedral angles in left-handed polyproline II structure.     

Design and NMR conformational study of a beta-sheet peptide based on Betanova and WW domains

A good approach to test our current knowledge on formation of protein beta-sheets is de novo protein design. To obtain a three-stranded beta-sheet mini-protein, we have built a series of chimeric peptides by taking as a template a previously designed beta-sheet peptide, Betanova-LLM, and incorporating N- and/or C-terminal extensions taken from WW domains, the smallest natural beta-sheet domain that is stable in absence of disulfide bridges. Some Betanova-LLM strand residues were also substituted by those of a prototype WW domain. The designed peptides were cloned and expressed in Escherichia coli. The ability of the purified peptides to adopt beta-sheet structures was examined by circular dichroism (CD). Then, the peptide showing the highest beta-sheet population according to the CD spectra, named 3SBWW-2, was further investigated by 1H and 13C NMR. Based on NOE and chemical shift data, peptide 3SBWW-2 adopts a well defined three-stranded antiparallel beta-sheet structure with a disordered C-terminal tail. To discern between the contributions to beta-sheet stability of strand residues and the C-terminal extension, the structural behavior of a control peptide with the same strand residues as 3SBWW-2 but lacking the C-terminal extension, named Betanova-LYYL, was also investigated. beta-Sheet stability in these two peptides, in the parent Betanova-LLM and in WW-P, a prototype WW domain, decreased in the order WW-P > 3SBWW-2 > Betanova-LYYL > Betanova-LLM. Conclusions about the contributions to beta-sheet stability were drawn by comparing structural properties of these four peptides.     

Solution structure of a Nedd4 WW domain-ENaC peptide complex

Nedd4 is a ubiquitin protein ligase composed of a C2 domain, three (or four) WW domains and a ubiquitin ligase Hect domain. Nedd4 was demonstrated to bind the epithelial sodium channel (alphabetagammaENaC), by association of its WW domains with PY motifs (XPPXY) present in each ENaC subunit, and to regulate the cell surface stability of the channel. The PY motif of betaENaC is deleted or mutated in Liddle syndrome, a hereditary form of hypertension caused by elevated ENaC activity. Here we report the solution structure of the third WW domain of Nedd4 complexed to the PY motif-containing region of betaENaC (TLPIPGTPPPNYDSL, referred to as betaP2). A polyproline type II helical conformation is adopted by the PPPN sequence. Unexpectedly, the C-terminal sequence YDSL forms a helical turn and both the tyrosine and the C-terminal leucine contact the WW domain. This is unlike other proline-rich peptides complexed to WW domains, which bind in an extended conformation and lack molecular interactions with residues C-terminal to the tyrosine or the structurally equivalent residue in non-PY motif WW domain targets. The Nedd4 WW domain-ENaC betaP2 peptide structure expands our understanding of the mechanisms involved in WW domain-ligand recognition and the molecular basis of Liddle syndrome.     

Characterization of a novel variant HMW-glutenin gene from Elymus canadensis

High molecular weight (HMW) glutenin subunits (GS) play a key role in the determination of end-use quality of wheat and other cereal crops. In this study, we report the isolation and characterization of both promoter region and ORF of novel HMW-GS allele 1St1.3 from a perennial Triticeae species, Elymus canadensis. The amino acid (AA) sequences of E. canadensis 1St1.3 were deduced as 434 aa. Its protein primary structure comprises a signal peptide with a conserved N-terminal domain, a central repetitive domain and a C-terminal domain. E. canadensis 1St 1.3 possesses several distinct characteristics which are different from those of wheat HMW-GSs. The N-terminal domains of E. canadensis 1St 1.3 resemble that of y-type subunits, while their C-terminal domains are more similar to x-type subunits. The deletion of 85 bp fragment has been observed in promoter region of 1St 1.3, however which has not interrupted the expression of this gene. Our results indicate that 1St 1.3 is novel HMW-GS variants which will be valuable for enhancing our understanding of structural differentiation and the evolutionary relationship among HMW-GSs in Triticeae species.     

Tandemly repeating peptide motifs and their secondary structure in Ceratitis capitata eggshell proteins Ccs36 and Ccs38.

Evidence from amino acid composition, Fourier transform analysis of primary structure and secondary structure prediction suggests a tripartite structure for Ceratitis capitata eggshell proteins Ccs36 and Ccs38, which consists of a central domain and two flanking 'arms'. The proteins, apparently, contain tandemly repeating peptide motifs specific for each domain of the tripartite structure. The central domain of both proteins, which exhibits extensive sequence homology with the corresponding domains of Drosophila melanogaster proteins s36 and s38, is formed by tandem repeats of an octapeptide-X-X-X-Z-Z-Z-Z-Z- (where X = large hydrophobic residue and Z = beta-turn former residue) and its variants. It is predicted to adopt a compact, most probably twisted, antiparallel beta-pleated sheet structure of beta-sheet strands regularly alternating with beta-turns or loops. The central domains of Ccs36 and Ccs38 share structural similarities, but they are recognizably different. The 'arms' of the proteins presumably serving for protein and species-specific functions differ substantially from those of Drosophila melanogaster. In Ccs36, the C-terminal 'arm' is formed by, almost precise, tandem repeats of an octapeptide-Y-X-A-A-P-A-A-S- (X = G or S), whereas the N-terminal 'arm' contains repeats of the octapeptide -Z-Z-Z-A-X-A-A-Z- (X = Q, N or E and Z a beta-turn former). In both 'arms' alpha-helices are predicted, alternating with beta-turns.(ABSTRACT TRUNCATED AT 250 WORDS)     

Water-soluble beta-sheet models which self-assemble into fibrillar structures.

Self-assembly of beta-sheet domains resulting in the formation of pathogenic, fibrillar protein aggregates (amyloids) is a characteristic feature of various medical disorders. These include neurodegenerative diseases, such as Alzheimer's, Huntington's, and Creutzfeldt-Jacob's. A significant problem in studying such aggregation processes is the poor solubility of these beta-sheet complexes. The present work describes water-soluble de novo beta-sheet peptides which self-assemble into fibrillar structures. The model peptides enable studies of the relationship between beta-sheet stability and association behavior. The peptides [DPKGDPKG-(VT)n-GKGDPKPD-NH2, n = 3-8] are composed of a central beta-sheet-forming domain (VT-sequence), and N- and C-terminal nonstructured octapeptide sequences which promote water solubility. Conformational analyses by circular dichroism and Fourier transform infrared spectroscopy indicate the influence of peptide length, D-amino acid substitution, and concentration on the ability of the peptides to form stable beta-sheet structures. The association behavior investigated by analytical ultracentrifugation and dynamic light scattering was found to correlate strongly with the stability of a beta-sheet conformation. Model peptides with n >/= 6 form stable, water-soluble beta-sheet complexes with molecular masses of more than 2000 kDa, which are organized in fibrillar structures. The fibrils examined by Congo Red staining and electron microscopy show some similarities with naturally occurring amyloid fibrils.     

Characterization and modelling of the hydrophobic domain of a sunflower oleosin

The oleosins are a group of hydrophobic proteins present on the surface of oil bodies in seeds, where they are thought to prevent coalescence. They contain a central hydrophobic domain of 68-74 residues that is thought to form a loop into the triacylglycerol matrix of the oil body, but the conformation adopted by this sequence is uncertain. We have therefore expressed an oleosin cDNA from sunflower (Helianthus annuus L.) in Escherichia coli as a fusion with maltose-binding protein (MBP) and isolated a peptide corresponding to the hydrophobic domain by sequential digestion with factor Xa (to remove the MBP) followed by trypsin and Staphylococcus V8 protease to remove the N- and C-terminal domains of the oleosin. Circular dichroism spectroscopy of the peptide in two solvent systems chosen to mimic the environment within the oil body (trifluoroethanol and SDS) demonstrated high proportions of alpha-helical structure, with no beta-sheet. A model was therefore developed in which the domain forms an alpha-helical hairpin structure, the two helices being separated by a turn region. We consider that this model is consistent with our current knowledge of oleosin structure and properties.     

Structural features of the human salivary mucin, MUC7

Human salivary mucin (MUC7) is characterized by a single polypeptide chain of 357 aa. Detailed analysis of the derived MUC7 peptide sequence reveals five distinct regions or domains: (1) an N-terminal basic, histatin-like domain which has a leucine-zipper segment, (2) a moderately glycosylated domain, (3) six heavily glycosylated tandem repeats each consisting of 23 aa, (4) another heavily glycosylated MUC1- and MUC2-like domain, and (5) a C-terminal leucine-zipper segment. Chemical analysis and semi-empirical prediction algorithms for O-glycosylation suggested that 86/105 (83%) Ser/Thr residues were O-glycosylated with the majority located in the tandem repeats. The high (～25%) proline content of MUC7 including 19 diproline segments suggested the presence of polyproline type structures. CD studies of natural and synthetic diproline-rich peptides and glycopeptides indicated that polyproline type structures do play a significant role in the conformational dynamics of MUC7. In addition, crystal structure analysis of a synthetic diproline segment (Boc-Ala-Pro-OBzl) revealed a polyproline type II extended structure. Collectively, the data indicate that the polyproline type II structure, dispersed throughout the tandem repeats, may impart a stiffening of the backbone and could act in consort with the glycosylated segments to keep MUC7 in a semi-rigid, rod shaped conformation resembling a ‘bottle-brush’ model.     

NMR solution structure of the tandem Src homology 3 domains of p47phox complexed with a p22phox-derived proline-rich peptide

The phagocyte NADPH oxidase plays a crucial role in host defense against microbial infections by generating reactive oxygen species. It is a multisubunit enzyme composed of membrane-bound flavocytochrome b558 as well as cytosolic components, including p47phox, which is essential for assembly of the complex. When phagocytes are activated, the cytosolic components of the NADPH oxidase translocate to flavocytochrome b558 due to binding of the tandem Src homology 3 (SH3) domains of p47phox to a proline-rich region in p22phox, a subunit of flavocytochrome b558. Using NMR titration, we first identified the proline-rich region of p22phox that is essential for binding to the tandem SH3 domains of p47phox. We subsequently determined the solution structure of the p47phox tandem SH3 domains complexed with the proline-rich peptide of p22phox using NMR spectroscopy. In contrast to the intertwined dimer reported for the crystal state, the solution structure is a monomer. The central region of the p22phox peptide forms a polyproline type II helix that is sandwiched by the N- and C-terminal SH3 domains, as was observed in the crystal structure, whereas the C-terminal region of the peptide takes on a short alpha-helical conformation that provides an additional binding site with the N-terminal SH3 domain. Thus, the C-terminal alpha-helical region of the p22phox peptide increases the binding affinity for the tandem SH3 domains of p47phox more than 10-fold.     

Structural and functional features of Drosophila chorion proteins s36 and s38 from analysis of primary structure and infrared spectroscopy

Amino acid composition, Fourier transform analysis and secondary structure prediction methods strongly support a tripartite structure for Drosophila chorion proteins s36 and s38. Each protein consists of a central domain and two flanking 'arms'. The central domain contains tandemly repetitive peptides, which apparently generate a secondary structure of beta-sheet strands alternating with beta-turns, most probably, forming a twisted beta-pleated sheet or beta-barrel. The central domains of s36 and s38 share similarities, but they are recognizably different. The flanking 'arms', with different primary and secondary structure features, presumably serve protein-specific functions. The possible roles of the protein domains for the establishment of higher order structure in Drosophila chorion and the possible function of the molecules are discussed. The predicted secondary structure of Drosophila chorion proteins s36 and s38 is supported by experimental information obtained from Fourier transform infrared spectroscopic studies of Drosophila chorions.