Biosynthesis and Uptake of Copper Nanoparticles by Dead Biomass of Hypocrea lixii Isolated from the Metal Mine in the Brazilian Amazon Region

A biological system for the biosynthesis of nanoparticles (NPs) and uptake of copper from wastewater, using dead biomass of Hypocrea lixii was analyzed and described for the first time. The equilibrium and kinetics investigation of the biosorption of copper onto dead, dried and live biomass of fungus were performed as a function of initial metal concentration, pH, temperature, agitation and inoculum volume. The high biosorption capacity was observed for dead biomass, completed within 60 min of contact, at pH 5.0, temperature of 40°C and agitation speed of 150 rpm with a maximum copper biosorption of 19.0 mg g⁻¹. The equilibrium data were better described using the Langmuir isotherm and kinetic analysis indicated that copper biosorption follows a pseudo-second-order model. The average size, morphology and location of NPs biosynthesized by the fungus were determined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). NPs were mainly spherical, with an average size of 24.5 nm, and were synthesized extracellularly. The X-ray diffraction (XRD) analysis confirms the presence of metallic copper particles. Infrared spectroscopy (FTIR) study revealed that the amide groups interact with the particles, which was accountable for the stability of NPs. This method further confirmed the presence of proteins as stabilizing and capping agents surrounding the copper NPs. These studies demonstrate that dead biomass of Hypocrea lixii provides an economic and technically feasible option for bioremediation of wastewater and is a potential candidate for industrial-scale production of copper NPs.     

Relationship among carotenoid production,copper bioremediation and oxidative stress in Rhodotorula mucilaginosa RCL-11

Rhodotorula mucilaginosa RCL-11, a pigmented yeast isolated from a filter plant of a copper mine in the province of Tucumán, Argentina, supports high concentrations of the heavy metal Cu(II). Copper overload augmented carotenoid biosynthesis in this yeast, modifying at the same time the relative proportion of the pigments produced. Inhibition of the synthesis pathway with diphenylamine suggests an inverse relationship between carotenoid and copper biosorption by R. mucilaginosa RCL-11. The increased activity of superoxide dismutase and catalase measured under inhibition of carotenoid biosynthesis could explain these observations. Exposure to H₂O₂, a second oxidative stress agent, alone or in combination with Cu(II) also modified the carotenoid content, both qualitatively and quantitatively. The change in the relative proportion of the carotenoids torularhodin, torulene and beta-carotena, as well as the detection of gamma-carotene in the presence of H₂O₂ and Cu(II) allows to hypothesize that the carotenoids produced by R. mucilaginosa RCL-11 plays different roles in the oxidative stress response of this yeast.     

Extra and Intracellular Synthesis of Nickel Oxide Nanoparticles Mediated by Dead Fungal Biomass

The use of dead biomass of the fungus Hypocrea lixii as a biological system is a new, effective and environmentally friendly bioprocess for the production and uptake of nickel oxide nanoparticles (NPs), which has become a promising field in nanobiotechnology. Dead biomass of the fungus was successfully used to convert nickel ions into nickel oxide NPs in aqueous solution. These NPs accumulated intracellularly and extracellularly on the cell wall surface through biosorption. The average size, morphology and location of the NPs were characterized by transmission electron microscopy, high-resolution transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The NPs were mainly spherical and extra and intracellular NPs had an average size of 3.8 nm and 1.25 nm, respectively. X-ray photoelectron spectroscopy analysis confirmed the formation of nickel oxide NPs. Infrared spectroscopy detected the presence of functional amide groups, which are probable involved in particle binding to the biomass. The production of the NPs by dead biomass was analyzed by determining physicochemical parameters and equilibrium concentrations. The present study opens new perspectives for the biosynthesis of nanomaterials, which could become a potential biosorbent for the removal of toxic metals from polluted sites.     

Biosorption of Copper(II) by Live and Dried Biomass of the White Rot Fungi Phanerochaete chrysosporium and Funalia trogii

Biosorption is an innovative and alternative technology to remove heavy metal pollutants from aqueous solution using live, inactive and dead biomasses such as algae, bacteria and fungi. In this study, live and dried biomass of Phanerochaete chrysosporium and Funalia trogii was applied as heavy metal adsorbent material. Biosorption of copper(II) cations in aqueous solution by live and dried biomass of Phanerochaete chrysosporium and Funalia trogii was investigated to study the effects of initial heavy metal concentration, pH, temperature, contact time, agitation rate and amount of fungus. Copper(II) was taken up quickly by fungal biomass (live or dried) during the first 15 min and the most important factor which affected the copper adsorption by live and dried biomass was the pH value. An initial pH of around 5.0 allowed for an optimum adsorption performance. Live biomass of two white rot fungi showed a high copper adsorption capacity compared with dried biomass. Copper(II) uptake was found to be independent of temperature in the range of 20–45 °C. The initial metal ion concentration (10–300 mg/L) significantly influenced the biosorption capacity of these fungi. The results indicate that a biosorption as high as 40–60 % by live and dried biomass can be obtained under optimum conditions.     

Metal-Induced Production of a Novel Bioadsorbent Exopolysaccharide in a Native Rhodotorula mucilaginosa from the Mexican Northeastern Region

There is a current need to develop low-cost strategies to degrade and eliminate industrially used colorants discharged into the environment. Colorants discharged into natural water streams pose various threats, including: toxicity, degradation of aesthetics and inhibiting sunlight penetration into aquatic ecosystems. Dyes and colorants usually have complex aromatic molecular structures, which make them very stable and difficult to degrade and eliminate by conventional water treatment systems. The results in this work demonstrated that heavy metal-resistant Rhodotorula mucilaginosa strain UANL-001L isolated from the northeast region of Mexico produce an exopolysaccharide (EPS), during growth, which has colorant adsorption potential. The EPS produced was purified by precipitation and dialysis and was then physically and chemically characterized by Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, and chemical elemental analysis. Here, the ability of the purified EPS produced to adsorb methylene blue (MB), which served as a model colorant, is studied. MB adsorption by the EPS is found to follow Langmuir Adsorption Isotherm kinetics at 25°C. Further, by calculating the Langmuir constant the adsorption capabilities of the EPS produced by the Rhodotorula mucilaginosa strain UANL-001L is compared to that of other adsorbents, both, microbially produced and from agroindustrial waste. The total adsorption capacity of the EPS, from the Rhodotorula mucilaginosa strain UANL-001L, was found to be two-fold greater than the best bioadsorbents reported in the literature. Finally, apart from determining which heavy metals stimulated EPS production in the strain, the optimal conditions of pH, heavy metal concentration, and rate of agitation of the growing culture for EPS production, was determined. The EPS reported here has the potential of aiding in the efficient removal of colorants both in water treatment plants and in situ in natural water streams.     

两种大型真菌子实体对Cd2+的生物吸附特性

对两种多孔菌科大型真菌槐栓菌(Trametes robiniophila)和木蹄层孔菌(Fomes fomentarius)子实体生物吸附Cd²⁺的影响因素(包括吸附剂用量、初始pH、吸附时间、初始Cd²⁺浓度)和吸附特性进行分析。结果表明,槐栓菌和木蹄层孔菌对低浓度的Cd²⁺(10 mg/L)吸附的最适pH为6;Cd²⁺的去除率随吸附剂用量和吸附时间的增加而增大,槐栓菌和木蹄层孔菌均在吸附剂用量为2g/L时达到吸附平衡,槐栓菌在吸附时间为30 min时达到吸附平衡,而木蹄层孔菌在吸附时间为60 min时达到吸附平衡;槐栓菌和木蹄层孔菌对10 mg/L Cd²⁺的最大去除率分别为98%和94%。Langmuir等温吸附平衡模型比Freundlich等温吸附平衡模型能更好的拟合两种大型真菌对Cd²⁺的吸附过程;槐栓菌和木蹄层孔菌对10 mg/L Cd²⁺的最大吸附量分别为17.40 mg/g和8.91 mg/g。对实验数据进行动力学模型拟合可知,两种大型真菌对Cd²⁺的生物吸附过程均符合准二阶动力学模型。槐栓菌和木蹄层孔菌生物吸附低浓度Cd²⁺的化学反应机理可能为离子交换。     

Biosorption of heavy metals by Bacillus thuringiensis strain OSM29 originating from industrial effluent contaminated north Indian soil

The study was navigated to examine the metal biosorbing ability of bacterial strain OSM29 recovered from rhizosphere of cauliflower grown in soil irrigated consistently with industrial effluents. The metal tolerant bacterial strain OSM29 was identified as Bacillus thuringiensis following 16S rRNA gene sequence analysis. In the presence of the varying concentrations (25–150 mgl⁻¹) of heavy metals, such as cadmium, chromium, copper, lead and nickel, the B. thuringiensis strain OSM29 showed an obvious metal removing potential. The effect of certain physico-chemical factors such as pH, initial metal concentration, and contact time on biosorption was also assessed. The optimum pH for nickel and chromium removal was 7, while for cadmium, copper and lead, it was 6. The optimal contact time was 30 min. for each metal at 32 ± 2 °C by strain OSM29. The biosorption capacity of the strain OSM29 for the metallic ions was highest for Ni (94%) which was followed by Cu (91.8%), while the lowest sorption by bacterial biomass was recorded for Cd (87%) at 25 mgl⁻¹ initial metal ion concentration. The regression coefficients obtained for heavy metals from the Freundlich and Langmuir models were significant. The surface chemical functional groups of B. thuringiensis biomass identified by Fourier transform infrared (FTIR) were amino, carboxyl, hydroxyl, and carbonyl groups, which may be involved in the biosorption of heavy metals. The biosorption ability of B. thuringiensis OSM29 varied with metals and was pH and metal concentration dependent. The biosorption of each metal was fairly rapid which could be an advantage for large scale treatment of contaminated sites.     

Biosorption of Nickel(II) from aqueous solution by the fungal mat of Trametes versicolor (rainbow) biomass: equilibrium, kinetics, and thermodynamic studies

This study investigates the equilibrium, kinetics and thermodynamics of Nickel(II) biosorption from aqueous solution by the fungal mat of Trametes versicolor (rainbow) biomass. The optimum biosorption conditions like pH, contact time, biomass dosage, initial metal ion concentration and temperaturewere determined in the batch method. The biosorbent was characterized by FTIR, SEM and BET surface area analysis. The experimental data were analyzed in terms of pseudo-first-order, pseudo-secondorder and intraparticle diffusion kinetic models, further it was observed that the biosorption process of Ni(II) ions closely followed pseudo-second-order kinetics. The equilibrium data of Ni(II) ions at 303, 313, and 323 K were fitted to the Langmuir and Freundlich isotherm models. Langmuir isotherm provided a better fit to the equilibrium data andthe maximum monolayer biosorption capacity of the T. versicolor(rainbow) biomass for Ni(II) was 212.5 mg/g at pH 4.0. The calculated thermodynamic parameters, ΔG^○, ΔH^○, and ΔS^○, demonstrated that the biosorption of Ni(II) ions onto the T. versicolor (rainbow) biomass was feasible, spontaneous and endothermic at 303 ～ 323 K. The performance of the proposed fungal biosorbent was also compared with that of many other reported sorbents for Nickel(II) removal and it was observed that the proposed biosorbent is effective in terms of its high sorption capacity.     

An ecofriendly approach for bioremediation of contaminated water environment: Potential contribution of a coastal seaweed community to environmental improvement

High levels of heavy metals like copper ions in many industrial based effluents lead to serious environmental and health problems. Biosorption is a potential environmental biotechnology approach for biotreatment of aquatic sites polluted with heavy metal ions. Seaweeds have received great attention for their high bioremediation potential in recent years. However, the co-application of marine macroalgae for removal of heavy metals from wastewater is very limited. Thus, for the first time in literature, a coastal seaweed community composed of Chaetomorpha sp., Polysiphonia sp., Ulva sp. and Cystoseira sp. species was applied to remove copper ions from synthetic aqueous medium in this study. The biosorption experiments in batch mode were conducted to examine the effects of operating variables including pH, biosorbent amount, metal ion concentration and contact time on the biosorption process. The biosorption behavior of biosorbent was described by various equilibrium, kinetic and thermodynamic models. The biosorption of copper ions was strongly influenced by the operating parameters. The results indicated that the equilibrium data of biosorption were best modeled by Sips isotherm model. The values of mean free energy of biosorption computed from Dubinin-Radushkevich isotherm model and the standard Gibbs free energy change indicated a feasible, spontaneous and physical biotreatment system. The pseudo-second-order rate equation successfully defined the kinetic behavior of copper biosorption. The pore diffusion also played role in the control of biosorption process. The maximum copper uptake capacity of biosorbent was found to be greater than those of many other biosorbents. The obtained results revealed that this novel biosorbent could be a promising material for copper ion bioremediation implementations.     

Metals sorption from aqueous solutions by Kluyveromyces marxianus: Process optimization,equilibrium modeling and chemical characterization

The dead Kluyveromyces marxianus biomass, a fermentation industry waste, was used to explore its sorption potential for lead, mercury, arsenic, cobalt, and cadmium as a function of pH, biosorbent dosage, contact time, agitation speed, and initial metal concentration. The equilibrium data fitted the Langmuir model better for cobalt and cadmium, but Freundlich isotherm for all metals tested. At equilibrium, the maximum uptake capacity (Qmax) was highest for lead followed by mercury, arsenic, cobalt, and cadmium. The RL values ranged between 0–1, indicating favorable sorption of all test metals by the biosorbent. The maximum Kf value of Pb showed its efficient removal from the solution. However, multi-metal analysis depicted that sorption of all metals decreased except Pb. The potentiometric titration of biosorbent revealed the presence of functional groups viz. amines, carboxylic acids, phosphates, and sulfhydryl group involved in heavy metal sorption. The extent of contribution of functional groups and lipids to biosorption was in the order: carboxylic>lipids>amines>phosphates. Blocking of sulfhydryl group did not have any significant effect on metal sorption.     

Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

Cr6+ bioremediation efficiency of Oscillatoria laete-virens (Crouan & Crouan) Gomont and Oscillatoria trichoides Szafer: kinetics and equilibrium study

Two species of cyanobacteria, Oscillatoria laete-virens (Crouan & Crouan) Gomont and Oscillatoria trichoides Szafer, were isolated from a polluted environment and studied for their Cr⁶⁺ removal efficiency from aqueous solutions. The parameters studied included the solution pH, contact time, initial concentration of Cr⁶⁺ and culture density. Living biomass is more efficient than dead biomass in Cr⁶⁺ removal. Removal by living biomass involves bioreduction and biosorption. Below pH 3.1, bioreduction is favored and biosorption is dominant at higher pH. The highest removal through biosorption for living biomass was achieved between pH 5 and 5.9 and for dead biomass at pH 2. The maximum removal was on the tenth day of exposure for both the species. Cr⁶⁺ removal increased from 0.2 to 0.4 g L^?1 of culture biomass with a decrease with further increase in biomass. Increased Cr⁶⁺ concentration decreases growth of both the species over time. Both species tolerate a concentration as high as 30 mg L^?1 Cr⁶⁺. There was no evidence of bioreduction in the case of dead biomass. Living biomass of O. laete-virens followed both Langmuir and Freundlich models with maximum sorptive capacity (q _max) of 21.88 mg g^?1. The results of dead biomass were well fitted only to Langmuir isotherm. O. trichoides living biomass did not follow either of the isotherms, but removed the metal to a maximum extent of 38.7mg g^?1. The removal was better described by Freundlich isotherm in case of dead biomass. The pseudo-first-order model describes the kinetics better than the pseudo-second-order model in the case of living biomass. Participation of carboxylic, carbonyl, and amino groups in Cr⁶⁺ removal was confirmed by FTIR analysis. Both species seem to be promising biosorbents for Cr⁶⁺.     

酿酒酵母吸附重金属离子的研究进展

重金属污染成为当今最重要的环境问题之一。生物吸附法是处理大体积低浓度重金属废水的一种理想方法,近年来有关的研究报道不断增多,但尚未实现工业化应用。酿酒酵母(Saccharomyces cerevisiae)不仅是具有实用潜力的生物吸附剂,也是研究重金属生物吸附机理的良好材料。结合自己的研究成果,总结了酿酒酵母作为生物吸附材料的优点、研究中的表现形式和吸附性能,重点讨论了酿酒酵母生物吸附机理,介绍了等温吸附平衡模型和动力学模型在酵母生物吸附中的应用情况。最后提出生物吸附进一步的研究方向。     

Kinetic,thermodynamic, and equilibrium biosorption of Pb(II), Cu(II), and Ni(II) using dead mushroom biomass under batch experiment

In this study, a low-cost biosorbent, dead mushroom biomass (DMB) granules, was used for investigating the optimum conditions of Pb(II), Cu(II), and Ni(II) biosorption from aqueous solutions. Various physicochemical parameters, such as initial metal ion concentration, equilibrium time, pH value, agitation speed, particles diameter, and adsorbent dosage, were studied. Five mathematical models describing the biosorption equilibrium and isotherm constants were tested to find the maximum uptake capacities: Langmuir, Freundlich, Redlich-Peterson, Sips, and Khan models. The best fit to the Pb(II) and Ni(II) biosorption results was obtained by Langmuir model with maximum uptake capacities of 44.67 and 29.17 mg/g for these two ions, respectively, whereas for Cu(II), the corresponding value was 31.65 mg/g obtained with Khan model. The kinetic study demonstrated that the optimum agitation speed was 400 rpm, at which the best removal efficiency and/or minimum surface mass transfer resistance (MSMTR) was achieved. A pseudo-second-order rate kinetic model gave the best fit to the experimental data (R² = 0.99), resulting in MSMTR values of 4.69× 10^?5, 4.45× 10^?6, and 1.12× 10^?6 m/s for Pb(II), Cu(II), and Ni(II), respectively. The thermodynamic study showed that the biosorption process was spontaneous and exothermic in nature.     

Characterization of optimal growth conditions and carotenoid production of strain Rhodotorula mucilaginosa HP isolated from larvae of Pieris rapae

Yeasts have been studied because of their production of a pigment known as carotenoid with potential application in food and feed supplements. A carotenoid‐producing yeast was isolated from the larvae of Pieris rapae, named HP. The strain HP was identified as Rhodotorula mucilaginosa classified by its carbohydrate fermentation pattern and physiological tests. Rhodotorula mucilaginosa HP produces several exogenous enzymes: alkaline phosphatase, esterase, leucine arylamidase, valine arylamidase, acid phosphatase and β‐glucosidase. Using response surface methodology, selected medium components (yeast extract, malt extract, peptone, glucose) were tested to find the optimum conditions for carotenoid production and the growth of R. mucilaginosa HP. Central composite design was used to control the concentrations of medium components. Peptone and glucose had the largest effects on carotenoid production and cell growth of R. mucilaginosa HP, respectively. The estimated optimal growth conditions of R. mucilaginosa HP were: yeast extract 3.23%, malt extract 2.84%, peptone 6.99% and glucose 12.86%. The estimated optimal conditions for carotenoid production were: yeast extract 2.17%, malt extract 2.11%, peptone 5.79% and glucose 12.46%. These results will assist in the formulation of an appropriate culture medium for optimal carotenoid production of R. mucilaginosa HP for commercial use.     

Kinetic and Equilibrium Studies of Cr(VI) Biosorption by Dead <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> Biomass

Many studies have been carried out on the biosorption capacity of different kinds of biomass. However, reports on the kinetic and equilibrium study of the biosorption process are limited. In our experiments, the removal of Cr(VI) from aqueous solution was investigated in a batch system by sorption on the dead cells of Bacillus licheniformis isolated from metal-polluted soils. Equilibrium and kinetic experiments were performed at various initial metal concentrations, pH, contact time, and temperatures. The biomass exhibited the highest Cr(VI) uptake capacity at 50°C, pH 2.5 and with the initial Cr(VI) concentration of 300 mg/g. The Langmuir and Freundlich models were considered to identify the isotherm that could better describe the equilibrium adsorption of Cr(VI) onto biomass. The Langmuir model fitted our experimental data better than the Freundlich model. The suitability of the pseudo first-order and pseudo second-order kinetic models for the sorption of Cr(VI) onto Bacillus licheniformis was also discussed. It is better to apply the pseudo second-kinetic model to describe the sorption system.     

The removal of Cu(II) from aqueous solutions by Ulothrix zonata

In this work, adsorption of copper(II) ions on alga has been studied by using batch adsorption techniques. The equilibrium biosorption level was determined as a function of contact time at several initial metal ion concentrations. The effect of adsorbent concentration on the amount adsorbed was also investigated. The experimental adsorption data were fitted to the Langmuir adsorption model. The free energy change (deltaG0) for the adsorption process was found to be -12.60 kJ/mol. The results indicated that the biomass of Ulothrix zonata is a suitable biosorbent for both the removal and recovery of heavy metals from wastewater.     

Intensification of biosorption of copper ions from solution by the yeast Saccharomyces cerevisiae in magnetic field

We studied the possibility of intensification of biosorption of copper ions by the yeast Saccharomyces cerevisiae 1968 from a copper sulfate solution by immersing a metal 80-rod headpiece into the solution and applying an external magnetic field. The field was parallel or perpendicular to the axes of headpiece rods. It was shown that intensification of extraction of copper ions at various geometries of the system differed insignificantly and that copper ions were extracted from the solution via biosoprtion and cementation at the metal headpiece.     

Biomass and carotenoid pigment production by patagonian native yeasts

Summary New yeast isolates from unexplored Patagonian habitats were studied for the production of biomass and carotenoids as the first step towards the selection of hyper-producing strains and the design of a process optimization approach. Patagonian yeast isolates considered as potential biomass and carotenoid sources were studied using ammonium sulphate and urea as nitrogen sources in semi-synthetic medium (MMS), and agro-industrial byproducts (cane molasses, corn syrup, raw malt extract) as carbon sources. Maximum pigment production (300 μg g⁻¹) was achieved by Rhodotorula mucilaginosa CRUB 0195 and by novel species Cryptococcus sp. CRUB 1046. β-carotene, torulene and torularhodin were the major carotenoids found.