Influence of carbon and nitrogen sources on lipase production by a newly isolated Candida viswanathii strain

Microorganisms can produce lipases with different biochemical characteristics making necessary the screening of new lipase-producing strains for different industrial applications. In this study, 90 microbial strains were screened as potential lipase producers using a sensitive agar plate method with a suitable medium supplemented with Tween 20 and also a liquid culture supplemented with olive oil. The highest cell growth and lipase production for Candida viswanathii were observed in triolein and oleic acid when used as the only pure carbon source. Renewable low-cost triacylglycerols supported the best cell growth, and olive oil was found to be the best inducer for lipase production (19.50 g/L and 58.50 U). The selected conditions for enzyme production were found with yeast extract as nitrogen source and 1.5 % (w/v) olive oil (85.70 U) that resulted in a good cell growth yield (Y_X/S?=?1.234 g/g) and lipase productivity (1.204 U/h) after 72 h of shake-flask cultivation. C. viswanathii lipase presented high hydrolytic activity on esters bonds of triacylglycerols of long-chain, and this strain can be considered an important candidate for future applications in chemical industries.     

脂肪酶产生菌的筛选及不对称水解合成S-(+)-萘普生

从１６个土样中分离获得一株脂肪酶产生菌Ｅ－５３＃,该菌可优先水解Ｓ－（＋）－萘普生甲酯为Ｓ－（＋）－萘普生,ｅｅ值可超过８７％。该菌经初步鉴定为芽孢杆菌,最佳产酶培养基为葡萄糖０．５％、蛋白胨０．５％、酵母膏０．２％。０．５％的橄榄油,能诱导脂肪酶的大量产生。     

Production and partial characterization of lipases from a newly isolated Penicillium sp. using experimental design

Aims:  The objective of this work was to investigate the lipase production by a newly isolated Penicillium sp . , using experimental design technique, in submerged fermentation using a medium based on peptone, yeast extract, NaCl and olive oil, as well as to characterize the crude enzymatic extracts obtained.
Methods and Results:  Lipase activity values of 9·5 U ml⁻¹ in 96 h of fermentation was obtained at the maximized operational conditions of peptone, yeast extract, NaCl and olive oil concentrations (g l⁻¹) of 20·0, 5·0, 5·0 and of 10·0 respectively. The partial characterization of crude enzymatic extract obtained by submerged fermentation showed optimum activity at pH range from 4·9 to 5·5 and temperature from 37°C to 42°C. The crude extract maintained its initial activity at freezing temperatures up to 100 days.
Conclusions:  A newly isolated strain of Penicillium sp . used in this work yielded good lipase activities compared to the literature.
Significance and Impact of the Study:  The growing interest in lipase production is related to the potential biotechnological applications that these enzymes present. New lipase producers are relevant to finding enzymes with different catalytic properties of commercial interest could be obtained, without using genetically modified organisms (GMO).     

Comparing submerged and solid-state fermentation of agro-industrial residues for the production and characterization of lipase by Trichoderma harzianum

Lipase production by Trichoderma harzianum was evaluated in submerged fermentation (SF) and solid-state fermentation (SSF) using a variety of agro-industrial residues. Cultures in SF showed the highest activity (1.4 U/mL) in medium containing 0.5 % (w/v) yeast extract, 1 % (v/v) olive oil and 2.5 C:N ratio. This paper is the first to report lipase production by T. harzianum in SSF. A 1:2 mixture of castor oil cake and sugarcane bagasse supplemented with 1 % (v/w) olive oil showed the best results among the cultures in SSF (4 U/g ds). Lipolytic activity was stable in a slightly acidic to neutral pH, maintaining 50 % activity after 30 min at 50 °C. Eighty percent of the activity remained after 1 h in 25 % (v/v) methanol, ethanol, isopropanol or acetone. Activity was observed with vegetable oils (olive, soybean, corn and sunflower) and long-chain triacylglycerols (triolein), confirming the presence of a true lipase. The results of this study are promising because they demonstrate an enzyme with interesting properties for application in catalysis produced by fermentation at low cost.     

Lipase and esterase formation by psychrophilic and mesophilic Acinetobacter species.

Acinetobacter O16, a psychrophilic species, produced extracellular lipase (measured by hydrolysis of olive oil, tributyrin, or beta-naphthyl laurate) when grown on a complex medium (peptone plus yeast extract). Most lipase was produced during the logarithmic phase of growth. Very little cell-bound lipase was formed. These cells also produced an esterase (measured by the hydrolysis of beta-naphthyl acetate). At first, all esterase was cell bound; significant amounts appeared in the external medium late in growth. Breaking the cells did not increase cell-bound lipase activity. After breaking of the cells, most of the cell-bound lipase and esterase activity was solubilized, even after very high speed centrifugation. No appreciable amounts of these enzymes were released by osmotic shock. Lipase formation was greatly affected by nutrient conditions. Lowering either the yeast extract of the peptone content of the normal complex medium lowered or abolished lipase formation. Esterase activity was lowered to a lesser extent. Cells growing in synthetic amino acid plus vitamin medium or in acid-hydrolyzed casein produced substantial amounts of esterase but no cell-free or cell-bound lipase. However, if sodium taurocholate was added to these media, lipase was produced. Greatest production occurred if a mixture of di- and poly-peptides was also present. Taurocholate also stimulated lipase production in the normal complex medium. Adding Tween 80 or ethanol to the normal complex medium inhibited lipase production. Sodium acetate, oleic acid, olive oil, or Tween 20 added to synthetic media did not affect lipase production. The psychrophile grew more quickly at 30 degrees C than at 15 or 20 degrees C but produced more lipase at the lower temperatures. Esterase production was about the same at 20 and 30 degrees C. A mesophilic Acinetobacter species produced the same amount of lipase and esterase at 20 and 30 degrees C. The best production of lipase by the psychrophile occurred in standing cultures.     

Production of lipase free of citrinin by Penicillium citrinum

Lipase (Glycerol ester hydrolase E.G. 3.1.1.3) from a Brazilian strain of Penicillium citrinum free of the mycotoxin citrinin has been investigated. Citrinin production was inhibited by using culture medium containing olive oil, soybean oil and corn oil as carbon sources. Potassium concentration and pH play an important role in citrinin production. Potassium concentration lower than 30 mM and pH below 4.5 inhibited the mycotoxin production. P. citrinum produced lipase free of extraneous proteins and citrinin when cultured using, as nitrogen source, ammonium sulphate (lipase activity of 7.88 U/mg) and yeast extract (lipase activity of 4.95 U/mg) with olive oil as carbon source. This data is relevant to the larger scale production of lipases for food technology applications, from Penicillium citrinum.     

Carbon source impact on Yarrowia lipolytica KKP 379 lipase production

The production of lipases by microorganisms is strongly influenced by the culture conditions. The optimum culture conditions for enzyme production are strain- and species-dependent. The aim of this study was to evaluate the impact of the carbon source used in the culture medium on the profile of lipases produced by Yarrowia lipolytica KKP 379. We observed a different pattern of extracellular and cell-bound lipase production, which was the highest in the early exponential phase. The extracellular lipase activity increased in the late exponential phase due to the lower accumulation of lipase molecules in cell walls. The best carbon source for extracellular lipase production by Y. lipolytica KKP 379 was olive oil. Glucose, dodecane and olive oil had a positive effect on biomass yield. Dodecane and/or glycerol utilization in microbiological lipase production was possible, but this process could not proceed without the addition of some activators such as olive oil in the cultivation medium.     

New finding and optimal production of a novel extracellular alkaline lipase from Yarrowia lipolytica NRRL Y-2178

Lipases are industrially useful versatile enzymes that catalyze numerous different reactions including hydrolysis of triglycerides, transesterification, and chiral synthesis of esters under natural conditions. Although lipases from various sources have been widely used in industrial applications, such as in food, chemical, pharmaceutical, and detergent industries, there are still substantial current interests in developing new microbial lipases, specifically those functioning in abnormal conditions. We screened 17 lipase-producing yeast strains, which were prescreened for substrate specificity of lipase from more than 500 yeast strains from the Agricultural Research Service Culture Collection (Peoria, IL, U.S.A.), and selected Yarrowia lipolytica NRRL Y-2178 as a best lipase producer. This report presents new finding and optimal production of a novel extracellular alkaline lipase from Y. lipolytica NRRL Y-2178. Optimal c ulture conditions f orlipase production by Y. lipolytica NRRL Y-2178 were 72 h incubation time, 27.5 degrees C, pH 9.0. Glycerol and glucose were efficiently used as the most efficient carbon sources, and a combination of yeast extract and peptone was a good nitrogen source for lipase production by Y. lipolytica NRRL Y-2178. These results suggested that Y. lipolytica NRRL Y-2178 showsgood industrial potential as a new alkaline lipase producer.     

Lipase production by Serratia marcescens strain SN5gR isolated from the scat of lion-tailed macaque (Macaca silenus) in Silent Valley National Park, a biodiversity hotspot in India

An extracellular lipase-producing bacterium was isolated from a fecal sample of lion-tailed macaque (Macaca silenus), an endangered Old World monkey that is endemic to the Western Ghats of South India. Morphological, biochemical and molecular analyses identified the bacterium as Serratia marcescens. Production of lipase was investigated in shake-flask culture. Optimum tributyrin concentration of 1.5 % was found to be the most suitable triglyceride to increase lipase production (13.3 U ml^?1). The next best lipid source observed was olive oil (11.94 U ml^?1), followed by castor oil, coconut oil and palm oil. Analyzing the effect of different carbon sources on lipase production revealed that 2 % glucose yielded higher lipase production than the other tested carbon sources. Investigations on suitable nitrogen source for lipase production revealed that 2 % meat extract yielded higher lipase production. The most suitable trace element for maximum lipase production was zinc sulfate, followed by magnesium sulfate and copper sulfate. Partial characterization of the crude lipase revealed that pH 7.0 and a temperature of 40 °C gave optimal lipase activity. Enzymatic activity of the crude sample was retained over a wide temperature range (20–75 °C), and 70 % of enzyme activity was retained at 60 °C. Testing the effect of various organic solvents on lipase activity revealed that hexadecane increased lipase activity by 85 % over the control.     

Production and activity of extracellular lipase from Luteibacter sp.

Microbial lipases are widely used in industrial applications due to their versatility, and the characterization of new lipase-producing microorganisms could provide new sources of these enzymes, with different specificities and better activities. In this context, we have improved lipase production by Luteibacter sp. by using basal medium supplemented with 2 % olive oil, a pH of 6 and a growth temperature of 37 °C. The enzyme extraction process with the addition of 0.25 % Tween 80 increased lipase activity. Implementation of these modifications increased lipase activity by approximately 430 %. The lipase activities produced in the culture supernatant (LCS) and extracted with Tween 80 (LCST80) were characterized. Both extracts hydrolyzed ρ-nitrophenyl (ρNP) esters with different acyl chain lengths, with a preference for short acyl lengths, and had optimum activity at 45 °C. The LCS was stable at acidic and alkaline pH, but LCST80 was only stable at alkaline pH. Methanol, SDS, Triton X-100, EDTA, and EGTA did not affect lipase activity, while divalent cations (Ca²⁺, Zn²⁺, Mg²⁺) - with the exception of Co²⁺— increased lipase activity. Both extracts showed transesterification activity on ρNP ester substrates, and both were able to hydrolyze different natural lipids. The characterization of lipase produced by Luteibacter sp. introduces this recently described genus as a new source of lipases with great biotechnological potential.     

扩展青霉碱性脂肪酶基因在毕赤酵母中的高效表达

将编码扩展青霉碱性脂肪酶 (PEL)的cDNA克隆到酵母整合型质粒pPIC3.5K ,电转化His4缺陷型巴斯德毕赤酵母 (Pichiapastoris)GS115 ,通过橄榄油 MM平板及PCR方法筛选和鉴定重组子。重组子发酵液经SDS PAGE分析、橄榄油检验板鉴定 ,表明扩展青霉碱性脂肪酶基因在巴斯德毕赤酵母中获得了高效表达。表达蛋白分泌至培养基中 ,分子量约 2 8kD ,与扩展青霉碱性脂肪酶大小一致 ,占分泌蛋白的 95 %。橄榄油检验板检验表明该表达蛋白可分解橄榄油 ,通过优化该表达菌的发酵条件 ,以橄榄油为底物进行酶活测定 ,其发酵液酶活可达 2 6 0u mL。     

Lipase Induction in Mucor hiemalis

The influence on lipase induction in Mucor hiemalis of different types of triglycerides containing mainly oleic acid (olive oil), erucic acid (mustard oil), or saturated fatty acids of 8 to 16 carbons (coconut oil) was studied. The fungus was grown in shake flasks in a fermentation medium containing peptone, minerals, and glucose or one of the oils as the carbon source. Maximum lipase was produced when the initial pH of the fermentation medium was kept at 4.0. Addition of Ca²⁺ to the medium did not increase lipase production. The optimum pH for activity of both the mycelial and extracellular lipases was found to be 7.0. The fungus produced a significant amount of lipase in the presence of glucose, but the lipase activity increased markedly when olive oil was added to the medium at the beginning of the fermentation. Addition of olive oil at a later stage did not induce as much enzyme. Studies with washed mycelia showed that a greater amount of lipase was released when olive oil was present than when glucose was present. Among the various types of triglycerides used as the carbon source, olive oil was found to be most effective in inducing the lipase. Olive oil and mustard oil fatty acids inhibited the lipase more than those of coconut oil. The lipase induced by a particular type of triglyceride did not seem to be specific for the same triglyceride, nor was it inhibited specifically by it. Irrespective of the triglyceride used in the fermentation medium, the lipase produced was most active against coconut oil triglyceride, and this specificity, as shown by lipase activities in an n-heptane system, was not found to be due to a better emulsification of this oil. The lipase of M. hiemalis can be considered to be both constitutive and inducible.     

Alkaline lipase from a novel strain Burkholderia multivorans: Statistical medium optimization and production in a bioreactor

An alkaline lipase from Burkholderia multivorans was produced within 15 h of growth in a 14 L bioreactor. An overall 12-fold enhanced production (58 U mL⁻¹ and 36 U mg⁻¹ protein) was achieved after medium optimization following the “one-variable-at-a-time” and the statistical approaches. The optimal composition of the lipase production medium was determined to be (% w/v or v/v): KH₂PO₄ 0.1; K₂HPO₄ 0.3; NH₄Cl 0.5; MgSO₄·7H₂O 0.01; yeast extract 0.36; glucose 0.1; olive oil 3.0; CaCl₂ 0.4 mM; pH 7.0; inoculum density 3% (v/v) and incubation time 36 h in shake flasks. Lipase production was maximally influenced by olive oil/oleic acid as the inducer and yeast extract as the additive nitrogen. Plackett–Burman screening suggested catabolite repression by glucose. Amongst the divalent cations, Ca²⁺ was a positive signal while Mg²⁺ was a negative signal for lipase production. RSM predicted that incubation time, inoculum density and oil were required at their higher levels (36 h, 3% (v/v) and 3% (v/v), respectively) while glucose and yeast extract were required at their minimal levels for maximum lipase production in shake flasks. The production conditions were validated in a 14 L bioreactor where the incubation time was reduced to 15 h.     

Evaluation of strains of Geotrichum candidum for lipase production and fatty acid specificity

Summary Three strains of Geotrichum candidum (ATCC 34614, NRRL Y-552 and NRRL Y-553) were examined for lipase production and activity. Variables including medium, pH, temperature, agitation rate and incubation time were examined to define the optimal culture conditions. Growth on oil in complex medium at 30°C, 300 rpm, and pH 7 produced maximal lipase activity. Fatty acid specificity of these strains and of two crude G. candidum enzyme preparations (lipase 26557 RP, Rhône Poulenc and lipase GC-4, Amano) was measured using equimolar mixtures of methyl or butyl esters of palmitic and oleic acids. The lipase from NRRL Y-553 and lipase 26557 RP displayed preferential specificity for hydrolyzing oleic acid esters, while the lipases from ATCC 34614, NRRL Y-552 and lipase GC-4 failed to discriminate between plamitic and oleic acids.     

Response surface analysis for the production of an enantioselective lipase from <Emphasis Type="Italic">Aspergillus niger</Emphasis> by solid-state fermentation

The lipase produced by the Aspergillus niger strain AC-54 has been widely studied due to its enantioselectivity for racemic mixtures. This study aimed to optimize the production of this enzyme using statistical methodology. Initially a Plackett-Burman (PB) design was used to evaluate the effects of the culture medium components and the culture conditions. Twelve factors were screened: water content, glucose, yeast extract, peptone, olive oil, temperature, NaH₂P0₄, KH₂P0₄, MgS0₄-7H₂0, CaCl₂, NaCI, and MnS0₄. The screening showed that the significant factors were water content, glucose, yeast extract, peptone, NaH₂P0₄, and KH₂P0₄, which were optimized using response surface methodology (RSM) and a mathematical model obtained to explain the behavioral process. The best lipase activity was attained using the following conditions: water content (20%), glucose (4.8%), yeast extract (4.0%), and NaH2P04 (4.0%). The predicted lipase activity was 33.03 U/ml and the experimental data confirmed the validity of the model. The enzymatic activity was expressed as μmoles of oleic acid released per minute of reaction (μmol/min).     

Production of lipase of Aspergillus foetidus in a batch stirred reactor

Summary Maximum lipase production byAspergillus foetidus was obtained from cultures grown in the medium of 2% olive oil and 0.5% sucrose. The optimal conditions for the production of lipases in the Multigen fermenters were found to be at 500rpm with an airflow of 1.5 liter per mimute. Immobilization of the fungal source was found to be infeasible in natural polymers.     

Production of Ricinoleic Acid from Castor Oil by Immobilised Lipases

Abstract

Porcine pancreatic lipase (PPL), Candida rugosa lipase (CRL), and Castor bean lipase (CBL) were immobilized on celite by deposition from aqueous solution by the addition of hexane. Lipolytic performance of free and immobilized lipases were compared and optimizations of lipolytic enzymatic reactions conditions were performed by free and immobilized derivatives using olive oil as substrate. Afterwards, the influence on lipolysis of castor oil of free lipases and immobilized lipase derivatives have been studied in the case of production of ricinoleic acid. All of the lipases performances were compared and enzyme derivative was selected to be very effective on the production of ricinoleic acid by lipolysis reaction. Various reaction parameters affecting the production of ricinoleic acid were investigated with selected the enzyme derivative.

The maximum ricinoleic acid yield was observed at pH 7–8, 50°C, for 3 hours of reaction period with immobilized 1,3-specific PPL on celite. The kinetic constants K_m and V_max were calculated as 1.6 × 10^?4 mM and 22.2 mM from a Lineweaver–Burk plot with the same enzyme derivative. To investigate the operational stability of the lipase, the three step lipolysis process was repeated by transferring the immobilized lipase to a substrate mixture. As a result, the percentange of conversion after usage decreased markedly.     

深海低温脂肪酶基因工程菌LIP001发酵条件的优化

对从深海沉积物宏基因组文库中获得的产低温脂肪酶基因工程菌LIP001进行了发酵条件优化。通过单因素试验对LIP001产脂肪酶的主要影响条件进行了探讨,确定了培养条件为30℃、pH7.0、接种量5%、装液量50ml。在单因素的基础上通过正交试验优化了影响重组菌LIP001产酶主要因素:橄榄油、酵母粉、磷酸盐、MgSO₄,确定了培养基为橄榄油1%、酵母粉0.5%、蛋白胨1%、硫酸铵0.5%、磷酸盐0.5%、MgSO₄为0.2%、氯霉素12.5μg/ml,优化后的脂肪酶活为1980U/ml,比优化前提高了54.7%,为大规模发酵奠定了基础。采用5升发酵罐方法试验,酶活达到2420U/ml。     

Culture condition improvement for whole-cell lipase production in submerged fermentation by Rhizopus chinensis using statistical method

Rhizopus chinensis CCTCC M201021 was a versatile strain capable of producing whole-cell lipase with synthetic activity in submerged fermentation. In order to improve the production of whole-cell lipase and study the culture conditions systematically, the combination of taguchi method and response surface methodology was performed. Taguchi method was used for the initial optimization, and eight factors viz., maltose, olive oil, peptone, K2HPO4, agitation, inoculum size, fermentation volume and pH were selected for this study. The whole-cell lipase activity yield was two times higher than the control experiment under initial optimal conditions, and four significant factors (inoculum, olive oil, fermentation volume and peptone) were selected to test the effect on the lipase production using response surface methodology. The optimal fermentation parameters for enhanced whole-cell lipase yield were found to be: inoculum 4.25 x 10(8) spores/L, olive oil 2.367% (w/v), fermentation volume 18 mL/250 mL flask, peptone 4.06% (w/v). Subsequent experimental trails confirmed the validity of the model. These optimal culture conditions in the shake flask led to a lipase yield of 13875 U/L, which 120% increased compare with the non-optimized conditions.     

Mucor circinelloides whole-cells as a biocatalyst for the production of ethyl esters based on babassu oil

The intracellular lipase production by Mucor circinelloides URM 4182 was investigated through a step-by-step strategy to attain immobilized whole-cells with high lipase activity. Physicochemical parameters, such as carbon and nitrogen sources, inoculum size and aeration, were studied to determine the optimum conditions for both lipase production and immobilization in polyurethane support. Olive oil and soybean peptone were found to be the best carbon and nitrogen sources, respectively, to enhance the intracellular lipase activity. Low inoculum level and poor aeration rate also provided suitable conditions to attain high lipase activity (64.8 ± 0.8 U g^?1). The transesterification activity of the immobilized whole- cells was assayed and optimal reaction conditions for the ethanolysis of babassu oil were determined by experimental design. Statistical analysis showed that M. circinelloides whole-cells were able to produce ethyl esters at all tested conditions, with the highest yield attained (98.1 %) at 35 °C using an 1:6 oil-to-ethanol molar ratio. The biocatalyst operational stability was also assayed in a continuous packed bed reactor (PBR) charged with glutaraldehyde (GA) and Aliquat-treated cells revealing half-life of 43.0 ± 0.5 and 20.0 ± 0.8 days, respectively. These results indicate the potential of immobilized M. circinelloides URM 4182 whole-cells as a low-cost alternative to conventional biocatalysts in the production of ethyl esters from babassu oil.