猪传染性胸膜肺炎放线杆菌毒素apxII基因无药物抗性标记突变株HBC-/GFP+的构建及其生物学特性研究

通过使用枯草芽胞杆菌一个蔗糖敏感sacB基因发展了一种依靠蔗糖的负向筛选系统 ,这种方法允许没有标记突变的基因进入胸膜肺炎放线杆菌染色体。首先 ,构建了猪传染性胸膜肺炎放线杆菌毒素apxII基因GFP插入失活型的重组质粒pOSAKCG ,其中一个表达盒含有氨苄青霉素基因和以外膜蛋白omlA作为启动子表达sacB基因。重组质粒pOSAKCG通过电穿孔转化 ,它的突变apxIICA基因与野生型亲本菌株胸膜肺炎放线杆菌HB03染色体上野生型apxIICA基因发生同源交换 ,两步法筛选获得了apxII基因突变株HBC^-GFP⁺,PCR和Southernblot对突变株进行初步鉴定 ,进一步对突变株的一些生物学特性 ,包括它的溶血活性、免疫原性、生长特性及其对小鼠的安全性进行了研究。结果表明 ,无药物抗性标记突变株的构建是成功的。该突变株的构建为进一步研究突变株作为载体和疫苗奠定了坚实的基础。     

血清7型胸膜肺炎放线杆菌apxⅡC-/apxⅠA+基因缺失重组菌株的构建与鉴定

通过接合转移和SacB负向筛选方法,成功构建了一株apxⅡC缺失的血清7型胸膜肺炎放线杆菌重组菌株。首先构建重组转移质粒pEHA1。将pEHA1转化供体菌大肠杆菌(E.coliβ2155),并将其与野生型APP血清7型亲本菌混合培养约5h,然后涂到含氯霉素抗性的培养基培养,挑取阳性克隆,接种到无抗性液体培养基,培养后涂于含有蔗糖的的固体培养基,培养一定时间后挑取蔗糖抗性的克隆,即可得到目的突变株。通过PCR、遗传稳定性、外毒素分泌、重组位点序列分析证明重组菌构建成功。通过对重组菌生物学特性进行初步研究,表明突变株生长能力未受影响,对小鼠毒力显著降低。该突变株构建体系的建立为猪传染性胸膜肺炎减毒活疫苗的开发及对胸膜肺炎放线杆菌新基因的功能研究奠定了良好基础。     

胸膜肺炎放线杆菌血清10型apxIC-/p36+弱毒株的构建与鉴定

摘要：【目的】构建血清10型胸膜肺炎放线杆菌弱毒菌株,为胸膜肺炎放线杆菌减毒活疫苗研究奠定基础。【方法】通过细菌接合转移和SacB负向筛选标记完成突变株的构建与筛选,用PCR、Western blot、重组位点序列对突变株进行鉴定分析。首先构建含肺炎支原体p36基因的pEICALDH重组转移质粒,并转化供体大肠杆菌( E. coliX7213),将转化的阳性克隆子与野生型APP血清10型亲本菌混合培养6 h;然后涂至含氯霉素抗性和烟酰胺腺嘌呤二核苷酸（NAD）的TSA培养基培养,挑取阳性克隆,接种至无抗性的含NAD的TSB液体培养基,培养6～8 h后涂至含10%的蔗糖及NAD的TSA培养基,培养24 h后挑取蔗糖抗性的克隆,即得到目的突变株。【结果】小鼠毒力试验结果表明突变株比亲本株的毒力显著降低;生长特性分析结果显示突变株与亲本株的增殖能力无显著差异;同时免疫试验结果表明突变株与安全剂量的亲本株均可诱导小鼠产生较好的免疫反应,证明apxIC基因缺失并不影响APP的免疫活性。【结论】成功构建了含猪肺炎支原体p36基因的胸膜肺炎放线杆菌血清10型突变株,所获得的突变株有望成为猪传染性胸膜肺炎弱毒疫苗株。     

血清7型胸膜肺炎放线杆菌apxⅡC-/apxⅠA+基因缺失重组菌株的构建与鉴定

通过接合转移和SacB负向筛选方法,成功构建了一株apxⅡC缺失的血清7型胸膜肺炎放线杆菌重组菌株。首先构建重组转移质粒pEHA1。将pEHA1转化供体菌大肠杆菌(E.coliβ2155),并将其与野生型APP血清7型亲本菌混合培养约5h,然后涂到含氯霉素抗性的培养基培养,挑取阳性克隆,接种到无抗性液体培养基,培养后涂于含有蔗糖的的固体培养基,培养一定时间后挑取蔗糖抗性的克隆,即可得到目的突变株。通过PCR、遗传稳定性、外毒素分泌、重组位点序列分析证明重组菌构建成功。通过对重组菌生物学特性进行初步研究,表明突变株生长能力未受影响,对小鼠毒力显著降低。该突变株构建体系的建立为猪传染性胸膜肺炎减毒活疫苗的开发及对胸膜肺炎放线杆菌新基因的功能研究奠定了良好基础。     

表达ApxIA的血清7型胸膜肺炎放线杆菌弱毒菌株的构建及特性分析

猪传染性胸膜肺炎是由胸膜肺炎放线杆菌引起的一种高度接触传染疾病,严重阻碍着全球养猪业的发展,疫苗接种是控制该病的有效措施。为提高胸膜肺炎放线杆菌弱毒疫苗的免疫效力,以及探索胸膜肺炎放线杆菌弱毒疫苗作为呼吸系统病原疫苗载体的可行性,通过穿梭质粒pJFF224-XN将完整的apxIA基因导入apxIIC基因缺失突变株HB04C-中,构建了含有apxIA和apxIIA基因的弱毒疫苗菌株HB04C2(apxIIC-/apxIIA+/apxIA+)。通过对HB04C2的生物学特性分析发现,穿梭质粒可稳定传代,并表达ApxIA,其生长特性未受穿梭质粒的影响。将HB04C2以气管接种方式免疫仔猪,可产生针对ApxIA和ApxIIA的抗体。二免后2周以高致病性的血清1型胸膜肺炎放线杆菌攻毒,该弱毒疫苗可提供良好的免疫保护效果。     

构建胸膜肺炎放线杆菌apxIC基因插入突变株

目的：构建胸膜肺炎放线杆菌（APP）apxIC基因插入突变菌株,以鉴定ApxⅠ毒素的生物学特性。方法：根据apxⅠ核酸序列（U05042）设计1对引物,用于自APP血清10型参考菌株（D13039）基因组DNA中扩增apxIC基因及其上下游约2．8kb的基因片段,经克隆测序后在apxIC基因下游xbI酶切位点处插入约0．9kb的氯霉素（Chl）抗性基因表达盒,构建用于转化的转移载体pUIC-Chl^r,将转移载体DNA经电转化导入APP血清10型参考菌株中进行同源重组,以获得突变菌株。结果：在含有氯霉素的培养基中经筛选获得2株丧失溶血活性的突变菌株（D13039C-Chl^r）;利用PCR和Southern blot对突变菌株鉴定,显示氯霉素抗性基因已被插入细菌基因组中。结论：利用电转化和同源重组技术构建成功APP apxIC基因插入突变菌株,为分析ApxⅠ毒素的生物学特性,进而研制APP基因工程减毒活疫苗奠定了基础。     

地衣芽孢杆菌α—淀粉酶基因在枯草芽孢杆菌中的诱导表达

采用PCR技术扩增了sacB基因的启动子-信号序列,并将扩增的序列重组进含地衣芽孢杆菌α-淀粉酶基因的质粒载体上构建了含α-淀粉酶基因的分泌型表达载体pSA60。将pSA60转化枯草芽孢杆菌QB1098后,α-淀粉酶基因在sacB基因启动子-信号序列的调控和蔗糖的诱导下获得表达,表达产物分泌至胞外。     

pilO基因对鲍曼不动杆菌运动能力的影响

目的:构建无标记的鲍曼不动杆菌pil O基因缺失突变株,通过表型鉴定pil O基因缺失对鲍曼不动杆菌运动能力的影响。方法:PCR扩增pil O基因上下游各1 kb同源臂,连接至p MO130-TelR自杀质粒,质粒转化大肠杆菌S17-1后再接合至鲍曼不动杆菌4294中;蔗糖诱导自杀质粒与基因组同源重组,以获得基因缺失突变株;蹭行实验观察pil O基因缺失对鲍曼不动杆菌运动能力的影响。结果:构建了pil O基因缺失鲍曼不动杆菌4294菌株突变株;缺失株与野生株生长曲线无明显差异,但蹭行能力显著下降。结论:pil O基因与细菌蹭行能力密切相关,提示其编码鲍曼不动杆菌Ⅳ型菌毛结构蛋白。     

炭疽芽胞杆菌mntA基因缺失突变株的构建及鉴定

目的:通过同源重组的方法敲除炭疽芽胞杆菌减毒AP422株的mntA基因,使菌株进一步减毒,用于构建新的疫苗候选株。方法:利用PCR方法扩增mntA基因上下游同源臂后与温敏质粒连接,构建打靶载体,并转化炭疽芽胞杆菌减毒AP422株;利用抗生素和温度2种选择压力实现同源重组,敲除目标基因mntA,然后利用Cre-LoxP系统去除抗性筛选标记,得到无抗性标记的缺失突变株,并利用PCR和Western印迹等方法对重组菌进行系统鉴定,最后分析突变株的生物学性状。结果:敲除了AP422株的mntA基因,获得了无抗性标记的缺失突变株,突变株的生存竞争能力比原始菌株明显减弱。结论:突变株获得了进一步减毒,可用于构建新的疫苗候选株。     

Pseudomonas plecoglossicida NyZ12基因无痕敲除方法的建立

旨在建立一种适合环己胺降解菌NyZ12基因无痕敲除的可靠方法。通过overlapping PCR技术将目的基因上下游同源臂融合并克隆到自杀载体pEX18km上,将重组质粒转化到大肠杆菌S17pir中,再通过接合转移到假单胞菌NyZ12菌株内,经pEX18km质粒上sacB基因的反向筛选得到突变株并通过PCR方法和测序鉴定。结果显示,成功构建了假单胞菌NyZ12菌株orf4637的基因突变株(NyZ12Δ4637)。通过自杀载体同源重组可以成功获得敲除的无痕突变株,且突变株基因组上没有任何抗性筛选标记残留,为环己胺降解菌NyZ12基因功能研究提供了可靠的基因敲除技术。     

Use of a conditionally lethal gene in Anabaena sp. strain PCC 7120 to select for double recombinants and to entrap insertion sequences.

Use of the sacB gene (J. L. Ried and A. Collmer, Gene 57:239-246, 1987) provides a simple, effective, positive selection for double recombinants in Anabaena sp. strain PCC 7120, a filamentous cyanobacterium. This gene, which encodes the secretory levansucrase of Bacillus subtilis, was inserted into the vector portion of a suicide plasmid bearing a mutant version of a chromosomal gene. Cells of colonies in which such a plasmid had integrated into the Anabaena chromosome through single recombination were plated on solid medium containing 5% sucrose. Under this condition, the presence of the sacB gene is lethal. A small fraction of the cells from initially sucrose-sensitive colonies became sucrose resistant; the majority of these sucrose-resistant derivatives had undergone a second recombinational event in which the sacB-containing vector had been lost and the wild-type form of the chromosomal gene had been replaced by the mutant form. By the use of this technique, we mutated two selected genes in the chromosome of Anabaena sp. strain PCC 7120. The conditionally lethal nature of the sacB gene was also used to detect insertion sequences from this Anabaena strain. Sucrose-resistant colonies derived from cells bearing a sacB-containing autonomously replicating plasmid were analyzed. Five different, presumed insertion sequences were found to have inserted into the sacB gene of the plasmids in these colonies. One of them, denoted IS892, was characterized by physical mapping. It is 1.7 kilobases in size and is present in at least five copies in the genome of Anabaena sp. strain PCC 7120.     

Allelic exchange in Escherichia coli using the Bacillus subtilis sacB gene and a temperature-sensitive pSC101 replicon

To facilitate efficient allelic exchange of genetic information into a wild-type strain background, we improved upon and merged approaches using a temperature-sensitive plasmid and a counter-selectable marker in the chromosome. We first constructed intermediate strains of Escherichia coli K12 in which we replaced wild-type chromosomal sequences, at either the fimB-A or lacZ-A loci, with a newly constituted DNA cassette. The cassette consists of the sacB gene from Bacillus subtilis and the neomycin (kanamycin) resistance gene of Tn5, but, unlike another similar cassette, it lacks IS1 sequences. We found that sucrose sensitivity was highly dependent on incubation temperature and sodium chloride concentration. The DNA to be exchanged into the chromosome was first cloned into derivatives of plasmid pMAK705, a temperature-sensitive pSC101 replicon. The exchanges were carried out in two steps, first selecting for plasmid integration by standard techniques. In the second step, we grew the plasmid integrates under non-selective conditions at 42 degrees C, and then in the presence of sucrose at 30 degrees C, allowing positive selection for both plasmid excision and curing. Despite marked locus-specific strain differences in sucrose sensitivity and in the growth retardation due to the integrated plasmids, the protocol permitted highly efficient exchange of cloned DNA into either the fim or lac chromosomal loci. This procedure should allow the exchange of any DNA segment, in addition to the original or mutant allelic DNA, into any non-essential parts of the E. coli chromosome.     

Characterization of a mutant Listeria monocytogenes strain expressing green fluorescent protein

To construct a recombinant strain of Listeria monocytogenes for the expression of heterologous genes, homologous recombination was utilized for insertional mutation, targeting its listeriolysin O gene (hly). The gene encoding green fluorescent protein (GFP) was used as the indicator of heterologous gene expression. The gene gfp was inserted into hly downstream from its promoter and signal sequence by an overlapping extension polymerase chain reaction, and was then cloned into the shuttle plasmid pKSV7 for allelic exchange with the L. monocytogenes chromosome. Homologous recombination was achieved by growing the electro-transformed L. monocytogenes cells on chloramphenicol plates at a non-permissive temperature. Sequencing analysis indicated correct insertion of the target gene in-frame with the signal sequence. The recombinant strain expressed GFP constitutively as revealed by fluorescence microscopy. The mutant strain L. monocytogenes hly-gfp lost its hemolytic activity as visualized on the blood agar or when analyzed with the culture supernatant samples. Such insertional mutation resulted in a reduced virulence of about 2 logs less than its parent strain L. monocytogenes 10403s as shown by the 50%-lethal-dose assays in the mouse and embryonated chicken egg models. These results thus demonstrate that mutated L. monocytogeues could be a potential carrier for the expression of heterologous passenger genes or could act as an indicator organism in the food industry.     

伪狂犬病病毒上海株（PRV—SH）gE^—／gI^—／GFP^＋缺失株的构建

在构建了含伪狂犬病病毒（Pseudorabies Virus,PRV）上海株gI基因和gE基因克隆鉴定的基础上,采用酶切的方法构建了载体pgEI。然后用限制性内切酶BamHI和BstPI缺失掉gE基因5‘端363bp,同时把绿色荧光蛋白（GFP）基因表达盒插入到缺失部分,并在下游 引入一个多克隆位点,构建了缺失转移载体pgEI-GFP。用DOTAP转染试剂盒将pgEI-GFP转染了感染PRV-SH的BHK-21细胞,待出现80％病变后收获病毒,并以蚀斑法得到纯化的缺失了gE/gI重组病毒株。小鼠试验证实了缺失株的毒力有所下降。     

Alielic exchange in Pseudomonas aeruginosa using novel ColE1-type vectors and a family of cassettes containing a portable oriT and the counter-selectable Bacillus subtilis sacB marker

An improved method for allele replacement in Pseudomonas aeruginosa was developed. The two main ingredients of the method are: (i) novel ColE1-type cloning vectors derived from pBR322 and pUC19; and (ii) a family of cassettes containing a portable oriT, the sacB gene from Bacillus subtilis as a counter-selectable marker, and a chloramphenicol-resistance gene allowing positive selection of both oriT and sacB. Introduction of plasmid-borne DNA into the chromosome was achieved in several steps. The DNA to be exchanged was first cloned into the new ColE1-type vectors. After insertion of the oriT and sacB sequences, these plasmid were conjugally transferred into P. aeruginosa and plasmid integrants were selected. Plating on sucrose-containing medium allowed positive selection for both plasmid excision and curing since Pseudomonas aeruginosa strains containing the sacB gene in single- or multiple copy were highly sensitive to 5% sucrose in rich medium. This procedure was successfully used to introduce an agmR mutation into P. aeruginosa wild-type strain PAO1 and should allow the exchange of any DNA segment into any non-essential regions of the P. aeruginosa chromosome.     

A single-step transconjugation system for the introduction of unmarked deletions into Actinobacillus pleuropneumoniae serotype 7 using a sucrose sensitivity marker

Research on the porcine respiratory tract pathogen Actinobacillus pleuropneumoniae requires the availability of improved genetic tools. Therefore, using the sacB gene of Bacillus subtilis, we developed a sucrose-based counterselection system that allows rapid curing of an Escherichia coli-A. pleuropneumoniae shuttle vector as well as the introduction of unmarked mutations into the A. pleuropneumoniae chromosome. A cassette containing the Tn903 kanamycin resistance determinant (km(r)) and the sacB gene expressed from the A. pleuropneumoniae omlA promoter was introduced by homologous recombination into the ureC gene of A. pleuropneumoniae. The resultant stable plasmid cointegrates were kanamycin-resistant, sucrose-sensitive, and urease-positive. A simple counterselection on sucrose-containing agar plates without an additional transconjugation step allowed the efficient isolation of urease-negative A. pleuropneumoniae mutants that had lost the km(r)-sacB cassette.     

Characterization of a suppressor mutation complementing an acid-sensitive mutation in Streptococcus mutans

We isolated a spontaneous suppressor mutant complementing the acid-sensitive phenotype of Streptococcus mutans strain Tn-1, a mutant previously generated in this laboratory, defective in the activity of the dgk-encoded putative undecaprenol kinase. A relatively simple genetic method was developed to identify the suppressor mutation, based on selection for transformants containing two closely linked markers: a selectable allele of the unknown suppressor gene and an antibiotic resistance gene introduced on a suicide plasmid at random sites into the chromosome via homologous recombination. While we have not actually identified the original suppressor mutation, another mutated gene restoring acid resistance has been isolated, which suggests a possible mechanism of suppression.     

A method for allelic replacement in Francisella tularensis

A vector for mutagenesis of Francisella tularensis was constructed based on the pUC19 plasmid. By inserting the sacB gene of Bacillus subtilis, oriT of plasmid RP4, and a chloramphenicol resistance gene of Shigella flexneri, a vector, pPV, was obtained that allowed specific mutagenesis. A protocol was developed that allowed introduction of the vector into the live vaccine strain, LVS, of F. tularensis by conjugation. As a proof of principle, we aimed to develop a specific mutant defective in expression of a 23-kDa protein (iglC) that we previously have shown to be prominently upregulated during intracellular growth of F. tularensis. A plasmid designated pPV-DeltaiglC was developed that contained only the regions flanking the encoding gene, iglC. By a double crossover event, the chromosomal iglC gene was deleted. However, the resulting strain, denoted DeltaiglC1, still had an intact iglC gene. Southern blot analysis verified that LVS harbors two copies for the iglC gene. The mutagenesis was therefore repeated and a mutant defective in both iglC alleles, designated DeltaiglC1+2, was obtained. The DeltaiglC1+2 strain, in contrast to DeltaiglC1, was shown to display impaired intracellular macrophage growth and to be attenuated for virulence in mice. The developed genetic system has the potential to provide a tool to elucidate virulence mechanisms of F. tularensis and the specific F. tularensis mutant illustrates the critical role of the 23-kDa protein, iglC, for the virulence of F. tularensis LVS.     

外源基因在苏云金杆菌染色体上的定点整合及表达

[目的]研究构建稳定表达外源基因、无抗性标记基因的苏云金杆菌(Bacillus thuringiensis简称Bt)工程菌的方法.在构建Bt工程菌时,高拷贝外源质粒的转入导致Bt芽孢数量减少,芽孢形成期延滞,影响Bt菌株的杀虫活力.而且,外源质粒在Bt中的稳定性较差,外源基因容易丢失.将基因整合人染色体是一种构建遗传性状稳定、杀虫活力高的Bt工程菌的有效方法.[方法]本研究采用PCR技术,分两段扩增定位于Bt无晶体突变株XBU001染色体上的trigger factor基因片段作为同源臂,克隆入温度敏感型载体pKSV7,构建了定点整合载体pKTF12.并利用pKTF12质粒将crylAc基因定点整合入XBU001染色体上.[结果]利用载体pKTF12将crylAc定点插入triggerfactor位点,对宿主菌XBU001的正常生长没有影响.重组菌株KCTF12中的crylAc基因能够稳定遗传、表达并形成菱形晶体.与携带高拷贝外源质粒的Bt菌株HTX42相比较,KCTF12具有芽孢数量增多、芽孢形成期提前的优势.[结论]定点整合法是一种构建稳定表达外源基因、无抗性标记基因Bt工程菌的有效方法.     

利用反式剪接核酶修复突变绿色荧光蛋白mRNA

为构建修复突变绿色荧七蛋白（GFP）基因的反式剪接核酶,分别构建包含突变的GFP基因的XYQ5／10-pGEM重组质粒、XYQ5／10—pEGFP—C2重组质粒及用于修复该突变基因的反式剪接核酶载体trans—rib—CMV2。通过对体外共转录XYQ5／10—pGEM和trans—rib—CMV2重组质粒的RNA产物进行RT—PCR检测核酶细胞外剪接效果;通过XYQ5／10-pEGFP-C2和trans—rib—CMV2重组质粒共转染HeLa细胞检测核酶细胞内的剪接效果。结果显示,XYQ5／10—pGEM、XYQ5／10-pEGFP-C2及trans—rib—CMV2重组质粒构建成功,反式剪接核酶在细胞外及细胞内都可以修复突变基因。虽然效率不高,但为今后更大规模地研究设计反式剪接核酶打下了基础。