Sodium alginate/poly(vinyl alcohol)/nano ZnO composite nanofibers for antibacterial wound dressings

Sodium alginate (SA)/poly (vinyl alcohol) (PVA) fibrous mats were prepared by electrospinning technique. ZnO nanoparticles of size ∼160 nm was synthesized and characterized by UV spectroscopy, dynamic light scattering (DLS), XRD and infrared spectroscopy (IR). SA/PVA electrospinning was further carried out with ZnO with different concentrations (0.5, 1, 2 and 5%) to get SA/PVA/ZnO composite nanofibers. The prepared composite nanofibers were characterized using FT-IR, XRD, TGA and SEM studies. Cytotoxicity studies performed to examine the cytocompatibility of bare and composite SA/PVA fibers indicate that those with 0.5 and 1% ZnO concentrations are less toxic where as those with higher concentrations of ZnO is toxic in nature. Cell adhesion potential of this mats were further proved by studying with L929 cells for different time intervals. Antibacterial activity of SA/PVA/ZnO mats were examined with two different bacteria strains; Staphylococcus aureus and Escherichia coli, and found that SA/PVA/ZnO mats shows antibacterial activity due to the presence of ZnO. Our results suggest that this could be an ideal biomaterial for wound dressing applications once the optimal concentration of ZnO which will give least toxicity while providing maximum antibacterial activity is identified.f     

Nanofibrous nonmulberry silk/PVA scaffold for osteoinduction and osseointegration

Poly‐vinyl alcohol and nonmulberry tasar silk fibroin of Antheraea mylitta are blended to fabricate nanofibrous scaffolds for bone regeneration. Nanofibrous matrices are prepared by electrospinning the equal volume ratio blends of silk fibroin (2 and 4 wt%) with poly‐vinyl alcohol solution (10 wt%) and designated as 2SF/PVA and 4SF/PVA, respectively with average nanofiber diameters of 177 ± 13 nm (2SF/PVA) and 193 ± 17 nm (4SF/PVA). Fourier transform infrared spectroscopy confirms retention of the secondary structure of fibroin in blends indicating the structural stability of neo‐matrix. Both thermal stability and contact angle of the blends decrease with increasing fibroin percentage. Conversely, fibroin imparts mechanical stability to the blends; greater tensile strength is observed with increasing fibroin concentration. Blended scaffolds are biodegradable and support well the neo‐bone matrix synthesis by human osteoblast like cells. The findings indicate the potentiality of nanofibrous scaffolds of nonmulberry fibroin as bone scaffolding material. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 271–284, 2015.     

PVA based nanofiber containing cellulose modified with graphitic carbon nitride/nettles/trachyspermum accelerates wound healing

Today, bacterial cellulose has received a great deal of attention for its medical applications due to its unique structural properties such as high porosity, good fluid uptake, good strength, and biocompatibility. This study aimed to fabricate and study bacterial cellulose/graphitic carbon nitride/nettles/trachyspermum nanocomposite by immersion and PVA/BC/g-C₃N₄/nettles/trachyspermum nanofiber by electrospinning method as a wound dressing. The g-C₃N₄ and g-C₃N₄ solution were synthesized and then were characterized using Fourier transform infrared, X-ray diffraction, Zeta Potential, and scanning electronic microscope analyzes. Also, the antibacterial properties of the synthesized materials were proved by gram-positive and gram-negative bacteria using the minimum inhibitory concentration method. Besides, the toxicity, migration, and cell proliferation results of the synthesized materials on NIH 3T3 fibroblasts were evaluated using MTT and scratch assays and showed that the BC/PVA/g-C₃N₄/nettles/trachyspermum composite not only had no toxic effect on cells but also contributed to cell survival, cell migration, and proliferation has done. To evaluate the mechanical properties, a tensile strength test was performed on PVA/BC/g-C₃N₄/nettles/trachyspermum nanofibers, and the results showed good strength of the nanocomposite. In addition, in vivo assay, the produced nanofibers were used to evaluate wound healing, and the results showed that these nanofibers were able to accelerate the wound healing process so that after 14 days, the wound healing percentage showed 95%. Therefore, this study shows that PVA/BC/g-C₃N₄/nettles/trachyspermum nanofibers effectively inhibit bacterial growth and accelerate wound healing.     

Silk–PVA Hybrid Nanofibrous Scaffolds for Enhanced Primary Human Meniscal Cell Proliferation

In this study, silk fibroin nanofibrous scaffolds were developed to investigate the attachment and proliferation of primary human meniscal cells. Silk fibroin (SF)–polyvinyl alcohol (PVA) blended electrospun nanofibrous scaffolds with different blend ratios (2:1, 3:1, and 4:1) were prepared. Morphology of the scaffolds was characterized using atomic force microscopy (AFM). The hybrid nanofibrous mats were crosslinked using 25 % (v/v) glutaraldehyde vapor. In degradation study, the crosslinked nanofiber showed slow degradation of 20 % on weight after 35 days of incubation in simulated body fluid (SBF). The scaffolds were characterized with suitable techniques for its functional groups, porosity, and swelling ratio. Among the nanofibers, 3:1 SF:PVA blend showed uniform morphology and fiber diameter. The blended scaffolds had fluid uptake and swelling ratio of 80 % and 458 ± 21 %, respectively. Primary meniscal cells isolated from surgical debris after meniscectomy were subcultured and seeded onto these hybrid nanofibrous scaffolds. Meniscal cell attachment studies confirmed that 3:1 SF:PVA nanofibrous scaffolds supported better cell attachment and growth. The DNA and collagen content increased significantly with 3:1 SF:PVA. These results clearly indicate that a blend of SF:PVA at 3:1 ratio is suitable for meniscus cell proliferation when compared to pure SF-PVA nanofibers.     

Structural characteristics and biological performance of silk fibroin nanofiber containing microalgae spirulina extract

Silk fibroin (SF) nanofiber scaffold containing microalgae Spirulina extract were prepared by electrospinning and the performance and functionality of the scaffold were evaluated. The viscosity and conductivity of the dope solution of Spirulina containing SF were examined for electrospinability and we found that the morphological structure of SF nanofiber is affected by the concentration of Spirulina extract added. The platelet adhesion and coagulation time test confirmed that the Spirulina containing SF nanofiber scaffold had excellent ability to prevent blood clotting or antithrombogenicity that is comparable to heparin. Low cytotoxicity and excellent cell adhesion and proliferation were also observed for Sprulina containing SF nanofiber scaffold by methylthiazolyldiphenyl‐tetrazolium bromide assay and confocal fluorescence microscope using fibroblast and human umbilical vein endothelial cells. Based on these results, we believe SF nanofiber scaffold containing Spirulina extract has the potential to be used as tissue engineering scaffold that requires high hemocompatibility. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 307–318, 2014.     

Preparation and characterization of wet spun silk fibroin/poly(vinyl alcohol) blend filaments

Silk fibroin (SF)/poly(vinyl alcohol) (PVA) blend filaments were prepared by a wet spinning process. Regenerated SF and PVA were dissolved in formic acid and the dope solution exhibited good fiber formation in a methanol coagulation bath. Due to the miscibility of SF/PVA in formic acid, the filament had a smooth surface and dense structure with a circular cross-section. The crystalline structure and thermal properties were varied with different SF/PVA ratios. The mechanical properties of the filament were also controlled by blending PVA with SF. Especially, the knot strength of the SF filament, which is a very important suture property, could be significantly improved by blending with PVA.     

Preparation of silver nanoparticles and riboflavin embedded electrospun polymer nanofibrous scaffolds for in vivo wound dressing application

Biocompatible silver-based nanofibrous frameworks have attracted intensive attention in wound dressing materials ascribed to their greater stability, minimal toxicity, excellent antibacterial activity, and extended therapeutic efficiency. The present investigation delineates a simple approach to synthesize silver nanoparticles (Ag NPs), and riboflavin (RF) decorated polyvinyl alcohol/β-Cyclodextrin (PVA/β-CD) electrospun nanofibrous scaffolds envisioning their application in wound dressings. PVA/β-CD polymer matrix regulates the stabilization of Ag NPs and RF. Also, it promotes the wound healing process and skin regeneration. The morphology, thermal properties, and their structure were also evaluated. Likewise, mechanical properties, biodegradation and drug release profile of the nanofibrous scaffolds were evaluated. In addition Antibacterial studies of the resultant nanofibrous scaffolds showed a strong inhibitory effect against Staphylococcus aureus and Escherichia coli at a considerable level. Moreover, Ag NPs-RF/PVA/β-CD nanofibrous scaffold were studied for its in vitro cytotoxicity using human embryonic kidney cells (HEK-293), and the results suggested that Ag NPs and RF present in the nanofibrous scaffolds exhibited its cytotoxicity. Besides, wound healing efficiency of the Ag NPs-RF decorated nanofibrous scaffolds was assessed using full thickness excision wounds in rat models displayed as an excellent biomaterial for wound dressings.     

Formation of silk fibroin matrices with different texture and its cellular response to normal human keratinocytes

Three forms of silk fibroin (SF) matrices, woven (microfiber), non-woven (nanofiber), and film form, were used to perform a conformational analysis and cell culture using normal human oral keratinocytes (NHOK). To obtain the SF microfiber (SF-M) matrix, natural grey silk was degummed, while the SF film (SF-F) and nanofiber (SF-N) matrices were prepared by casting and electrospinning the formic acid solutions of the regenerated SF, respectively. For insolubilization, as-prepared SF-F and SF-N matrices were chemically treated with an aqueous methanol solution of 50%. The conformational structures of as-prepared and chemically treated SF matrices were investigated using attenuated total reflectance infrared spectroscopy (ATR-IR) and solid-state ¹³C CP/MAS nuclear magnetic resonance (NMR) spectroscopy. The as-cast SF-F matrix formed a mainly β-sheet structure that was similar to the SF-M matrix, whereas the as-spun SF-N matrix had a random coil conformation as the predominant secondary structure. Conformational transitions from random coil to β-sheet of the as-spun SF-N occurred rapidly within 10 min following aqueous methanol treatment, and were confirmed by solid-state ¹³C NMR analysis. To assess the cytocompatibility and cells behavior on the different textures of SF, we examined the cell attachment and spreading of NHOK that was seeded onto the SF matrices, as well as the interaction between the cells and SF matrices. Our results indicate that the SF nanofiber matrix may be more preferable than SF film and SF microfiber matrices for biomedical applications, such as wound dressings and scaffolds for tissue engineering.     

Preparation and Characterization of a Silk Fibroin/Polyurethane Fiber Blend Membrane Containing Actinomycin X2 with Excellent Mechanical Properties and Enhanced Antibacterial Activities

Development of suitable antimicrobial biomaterials for hygienic wound dressing and healing is an important requirement for medical application. Durable mechanical properties increase the application range of biomaterial in different environmental and biological conditions. Due to the inherent brittleness of silk fibroin (SF), polyurethane fiber (PUF) was used to modify SF containing actinomycin X2 (Ac.X2) to prepare silk fibroin@actinomycin X₂/polyurethane fiber (ASF/PUF) blend membranes. The ASF/PUF blend membrane was developed by solution casting method. Incorporation of PUF improved the flexibility of material and introduction of Ac.X2 has increased antibacterial activity of materials. Excellent mechanical properties (tensile strength up to 25.7 MPa and elongation at break up to 946.5 %) of 50 % SF+50 % PUF blend membrane were proved by tensile testing machine. FT-IR spectra, TGA, contact angle and DMA were tested to prove the blend membrane's physico-chemical characteristics. ASF/PUF blend membrane displayed satisfactory antibacterial activity against S. aureus, and the cytotoxicity tests showed that the blend membrane has better biosafety compared to directly applied Ac.X2 in soluble form. These results suggest that the modification of SF through PUF for development of flexible antibacterial membranes has great potential application value in the field of silk-like material fabrication.     

Characterization,antibacterial, antioxidant,and cytotoxic activities of ZnO nanoparticles using Coptidis Rhizoma

Here, we report a simple, eco-friendly and inexpensive approach for the synthesis of zinc oxide nanoparticles (ZnO NPs) using Coptidis Rhizoma. The ZnO NPs were characterized by UV–visible absorption spectroscopy, FTIR, SEM-EDX, TGA, TEM, SAED and XRD. TEM images confirmed the presence of spherical and rod shaped ZnO NPs in the range of 2.90–25.20 nm. Green synthesized ZnO NP_S exhibited moderate antibacterial activity against Gram-positive and Gram-negative bacteria and excellent DPPH free radical scavenging activity. Synthesized ZnO NPs had no toxic effects on the RAW 264.7 cell line.     

Synthesis and characterization of the antibacterial potential of ZnO nanoparticles against extended-spectrum β-lactamases-producing <Emphasis Type="BoldItalic">Escherichia coli</Emphasis> and <Emphasis Type="BoldItalic">Klebsiella pneumoniae</Emphasis> isolated from a tertiary care hospital of North India

The reemergence of infectious diseases and the continuous development of multidrug resistance among a variety of disease-causing bacteria in clinical setting pose a serious threat to public health worldwide. Extended-spectrum β-lactamases (ESBLs) that mediate resistance to third-generation cephalosporin are now observed all over the world in all species of Enterobacteriaceae, especially Escherichia coli and Klebsiella pneumoniae. In this work, ZnO nanoparticles (NPs) were synthesized by the sol–gel method and characterized by powder X-ray diffraction, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The image of synthesized ZnO NPs appeared spherical in SEM with a diameter of ≈19 nm and as hexagonal crystal in AFM. Clinical isolates were assessed for ESBL production and shown to be sensitive to ZnO NPs by different methods such as minimal inhibitory concentration (MIC) and minimal bactericidal concentration, time-dependent growth inhibition assay, well diffusion agar methods and estimation of colony forming units (CFU) of bacteria. The lowest MIC value for E. coli and K. pneumoniae was found to be 500 μg/ml. The results showed that ZnO NPs at 1,000 μg/ml completely inhibit the bacterial growth. The antibacterial effect of ZnO nanoparticles was gradual, but time- and concentration-dependent. The maximum inhibition zone at100 μg/ml for E. coli and K. pneumoniae was 22 and 20 mm, respectively. With the increasing ZnO NP loading, there is significant reduction in the numbers of CFU. At the concentration of 1,000 μg/ml, the decline in per cent survival of E. coli and K. pneumoniae was found to be 99.3% and 98.6%, respectively.     

In vitro antimicrobial effect of metallic nanoparticles on phytopathogenic strains of crop plants

In this research, the in vitro antimicrobial effect of zinc oxide (ZnO), copper oxide (CuO) and iron oxide (Fe₂O₃) nanoparticles (NPs)—with average sizes of 20, 46 and 30 nm, respectively—on the root rot disease caused by the fungus Fusarium oxysporum and on blight disease caused by the fungus Alternaria solani were studied. Also, bacterial diseases caused by Clavibacter michiganensis and Pseudomonas syringae that infects a wide range of plant species were assessed. Different concentrations of NPs (0, 100, 250, 500, 700 and 1,000 mg/L) were prepared on PDA agar or King's B medium in a complete randomized design with four replicates. According to the results, ZnO NPs exhibited an outstanding inhibitory effect against fungi and bacteria strains. The above results were associated with the smaller particle size. Fungi strains showed a differential sensitivity depending on the kind of NPs used. A. solani showed the highest sensitivity to ZnO NPs at 1,000 mg/L (99%), followed by CuO NPs at the same dose (95%). Fe₂O₃ NPs at all evaluated doses had no inhibitory effects on the mycelia growth of this strain, although F. oxysporum revealed greater effectiveness of the CuO NPs (96%) compared with ZnO NPs since it only inhibited 91% of the mycelial growth. The antibacterial activity was studied through optical density. C. michiganensis was found to be more sensitive to ZnO NPs because a lesser dose (700 mg/L) was required to reduce the bacterial growth (90%); in comparison, P. syringae required a dose of 1,000 mg/L to inhibit its growth (67%). CuO NPs displayed the smallest growth inhibition against the bacteria strains analysed. The antimicrobial effect of the metallic NPs that were assayed increased with higher doses.     

Incorporation of SPION-casein core-shells into silk-fibroin nanofibers for cardiac tissue engineering

Mimicking the structure of extracellular matrix (ECM) of myocardium is necessary for fabrication of functional cardiac tissue. The superparamagnetic iron oxide nanoparticles (SPIONs, Fe₃O₄), as new generation of magnetic nanoparticles (NPs), are highly intended in biomedical studies. Here, SPION NPs (1 wt%) were synthesized and incorporated into silk-fibroin (SF) electrospun nanofibers to enhance mechanical properties and topography of the scaffolds. Then, the mouse embryonic cardiac cells (ECCs) were seeded on the scaffolds for in vitro studies. The SPION NPs were studied by scanning electron microscope (SEM), X-ray diffraction (XRD), and transmission electron microscope (TEM). SF nanofibers were characterized after incorporation of SPIONs by SEM, TEM, water contact angle measurement, and tensile test. Furthermore, cytocompatibility of scaffolds was confirmed by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay. SEM images showed that ECCs attached to the scaffolds with elongated morphologies. Also, the real-time PCR and immunostaining studies approved upregulation of cardiac functional genes in ECCs seeded on the SF/SPION-casein scaffolds including GATA-4, cardiac troponin T, Nkx 2.5, and alpha-myosin heavy chain, compared with the ones in SF. In conclusion, incorporation of core-shells in SF supports cardiac differentiation, while has no negative impact on ECCs' proliferation and self-renewal capacity.     

Collagen-based biomimetic nanofibrous scaffolds: preparation and characterization of collagen/silk fibroin bicomponent nanofibrous structures

Electrospinning of collagen (COL)/silk fibroin (SF) blend solutions in 1,1,1,3,3,3-hexafluoro-2-propanol was investigated for fabrication of a biocompatible and biomimetic nanostructured scaffold for tissue engineering. The morphology of the electrospun COL/SF blend nanofibers was observed by scanning electron microscopy. The average diameters of COL/SF blend fibers ranged from 320 to 360 nm, irrespective of SF content in the blends. Both COL and SF components in the as-spun COL/SF blend matrices were stabilized by glutaraldehyde and water vapor, respectively, under the saturated glutaraldehyde aqueous solution at 25 degrees C. The glutaraldehyde vapor chemically stabilized the COL component via cross-linking, whereas the water vapor physically stabilized the SF component via crystallization to the beta-sheet structure. These structural changes of after-treated COL/SF blend matrices were examined using ATR-IR and CP/MAS (13)C NMR spectroscopy. To assay the cytocompatibility and cellular behavior of the COL/SF blend nanofibrous scaffolds, cell attachment and the spreading of normal human epidermal keratinocytes (NHEK) and fibroblasts (NHEF) seeded on the scaffolds were studied. In addition, both morphological changes and cellular responses of COL/SF blend nanofibrous matrices were also compared with COL/SF hybrid nanofibrous matrices. Generally similar levels of cell attachment and spreading of NHEF were shown in the COL/SF blend nanofibrous matrix compared with those of the pure COL and pure SF matrices; the cellular responses of NHEK were, however, markedly decreased in the COL/SF blend nanofibrous matrix as compared to the pure matrices. In contrast, cell attachment and spreading of NHEK on the COL/SF hybrid nanofibrous matrix were significantly higher than that of the COL/SF blend nanofibrous matrix. Our results indicate that a COL/SF hybrid nanofibrous matrix may be a better candidate than a COL/SF blend nanofibrous matrix for biomedical applications such as wound dressing and scaffolds for tissue engineering.     

Electrospun Scaffold of Collagen and Polycaprolactone Containing ZnO Quantum Dots for Skin Wound Regeneration

Nanofibers(NFs)have been widely used in tissue engineering such as wound healing.In this work,the antibacterial ZnO quantum dots(ZnO QDs)have been incorporated into the biocompatible poly(ε-caprolactone)/collagen(PCL/Col)fibrous scaffolds for wound healing.The as-fabricated PCL-Col/ZnO fibrous scaffolds exhibited good swelling,antibacterial activity,and biodegradation behaviors,which were beneficial for the applications as a wound dressing.Moreover,the PCL-Col/ZnO fibrous scaffolds showed excellent cytocompatibility for promoting cell proliferation.The resultant PCL-Col/ZnO fibrous scaffolds containing vascular endothelial growth factor(VEGF)also exhibited promoted wound-healing effect through promoting expression of transforming growth factor-β(TGF-β)and the vascular factor(CD31)in tissues in the early stages of wound healing.This new electrospun fibrous scaffolds with wound-healing promotion and antibacterial property should be convenient for treating wound healing.     

In vitro antidiabetic,antioxidant, antimicrobial,and cytotoxic activity of Murraya koenigii leaf extract intercedes ZnO nanoparticles

Nanotechnology is an emerging field with tremendous potential and usage of medicinal plants and green preparation of nanoparticles (NPs) is one of the widely explored areas. These have been shown to be effective against different biological activities such as diabetes mellitus, cancer, antioxidant, antimicrobial, etc. The current studies focus on the green synthesis of zinc NPs (ZnO NPs) from aqueous leaf extract of Murraya koenigii (MK). The synthesized Murraya koeingii zinc oxide NPs (MK ZnO NPs) were characterized using UV–visible spectroscopy, dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive spectrum (EDS) and cyclic voltammetry (CV). The synthesized MK ZnO NPs were evaluated for their in vitro antidiabetic, antioxidant, antimicrobial, and cytotoxic activity. They demonstrated significant antidiabetic and cytotoxic activity, as well as moderate free-radical scavenging and antibacterial activity.     

Characterization and antibacterial activity of the nanocomposite of half-fin anchovy (Setipinna taty) hydrolysates/zinc oxide nanoparticles

Half-fin anchovy (Setipinna taty) hydrolysates (HAHp) was conjugated with zinc oxide nanoparticles (ZnO NPs) using a hydrothermal method to develop a novel antibacterial nanocomposite. The generated supernatants of the conjugate, designated as HAHp(3.0)/ZnO NPs, were characterized by transmission electron microscopy, high resolution transmission electron microscopy, and inductively coupled plasma-optical emission spectrometer. Results showed that HAHp(3.0) was absorbed on the surface of the ZnO NPs. The total content of zinc element was 9127.4 mg/kg in HAHp(3.0)/ZnO NPs. The increased antibacterial effects were observed for the HAHp(3.0)/ZnO NPs with the minimal inhibitory concentration of 3.5 μgprotein/mL against Escherichia coli (E. coli), Pseudomonas fluorescens, Salmonella and Staphylococcus aureus, compared to the bare HAHp(3.0). The antibacterial activity of HAHp(3.0)/ZnO NPs was further evaluated using E. coli as the model strain. The incubation of HAHp(3.0)/ZnO NPs increased the outer and inner membrane permeability in E. coli cells, and the leakages of potassium ions and the cytoplasmic β-galactosidase were detected during the process. Furthermore, porous structures were observed on the membrane of E. coli cells by scanning electron microscopy. In addition, the formation of intracellular reactive oxygen species was detected using fluorescence microscopy. The results suggested that the HAHp(3.0)/ZnO NPs could be a promising antibacterial nanocomposite.     

Gentamicin-Loaded Wound Dressing With Polyvinyl Alcohol/Dextran Hydrogel: Gel Characterization and In Vivo Healing Evaluation

To develop a gentamicin-loaded wound dressing, cross-linked hydrogel films were prepared with polyvinyl alcohol (PVA) and dextran using the freezing–thawing method. Their gel properties such as gel fraction, swelling, water vapor transmission test, morphology, tensile strength, and thermal property were investigated. In vitro protein adsorption test, in vivo wound healing test, and histopathology were performed. Dextran decreased the gel fraction, maximum strength, and thermal stability of hydrogels. However, it increased the swelling ability, water vapor transmission rate, elasticity, porosity, and protein adsorption. The drug gave a little positive effect on the gel properties of hydrogels. The gentamicin-loaded wound dressing composed of 2.5% PVA, 1.13% dextran, and 0.1% drug was more swellable, flexible, and elastic than that with only PVA because of its cross-linking interaction with PVA. In particular, it could provide an adequate level of moisture and build up the exudates on the wound area. From the in vivo wound healing and histological results, this gentamicin-loaded wound dressing enhanced the healing effect more compared to conventional product because of the potential healing effect of gentamicin. Thus, this gentamicin-loaded wound dressing would be used as a potential wound dressing with excellent forming and improved healing effect in wound care.     

Probing the interaction of caffeic acid with ZnO nanoparticles

The binding of ZnO nanoparticles (NPs) and caffeic acid (CFA) was investigated using fluorescence quenching, UV/vis absorption spectrscopy, Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS) at different temperatures. The study results indicated fluorescence quenching between ZnO NPs and CFA rationalized in terms of a static quenching mechanism or the formation of non‐fluorescent CFA–ZnO. From fluorescence quenching spectral analysis, the binding constant (K_a), number of binding sites (n) and thermodynamic properties were determined. Values of the quenching (K_SV) and binding (K_a) constants decrease with increasing temperature and the number of binding sites n = 2. The thermodynamic parameters determined using Van't Hoff equation indicated that binding occurs spontaneously involving the hydrogen bond, and van der Waal's forces played a major role in the reaction of ZnO NPs with CFA. The FTIR, TEM and DLS measurements also indicated differences in the structure, morphology and size of CFA, ZnO NPs and their corresponding CFA–ZnO. Copyright © 2015 John Wiley & Sons, Ltd.     

一种可止血的富血小板血浆壳聚糖/丝素蛋白多孔伤口敷料的制备及性能表征

为了进一步提高伤口敷料的止血性能,文中在生物相容性良好的壳聚糖溶液中引入含有多种生长因子的人源性富血小板血浆(Humanplatelet-richplasma,hPRP),并加入不同体积比例(1∶1、1∶3、3∶1、1∶0)的丝素蛋白溶液以提高材料的多孔性与止血性,通过冷冻干燥法制备不同配比的hPRP-壳聚糖/丝素蛋白敷料,并将纯壳聚糖敷料作为对照组,研究hPRP和丝素蛋白对敷料的止血性能的影响以及丝素蛋白对PRP中生长因子控制释放的影响。结果表明,在壳聚糖敷料中引入hPRP对敷料的止血性有所提高,但对敷料的多孔结构及吸水率无明显改善,若在hPRP-壳聚糖溶液中按照体积比为1∶1的比例加入丝素蛋白溶液,会得到具有较为均匀的多孔结构的敷料,敷料的孔隙率与吸水率分别可达到86.83%±3.84%与1 474%±114%,且该比例的敷料在快速止血性能上表现优异。此外,加入丝素蛋白与壳聚糖比例为1∶1的PRP敷料能有效减少PRP中生长因子在初始阶段的爆裂释放。因此,含hPRP的壳聚糖/丝素蛋白复合敷料有望成为一种能快速止血且能促进伤口愈合的新型伤口敷料。