A novel Tb(3+)-promoted G-quadruplex-hemin DNAzyme for the development of label-free visual biosensors

A Tb(3+)-promoted G-quadruplex-hemin DNAzyme was first reported in here. We demonstrated that trace Tb(3+) is able to induce guanine-rich DNA (5'-TGGGTAGGGCGGGTTGGGAAA-3') folding into a compact antiparallel G-quadruplex structure and thus allows the formation of G-quadruplex-hemin DNAzyme. The proposed DNAzyme can effectively catalyze the H(2)O(2)-mediated oxidation of TMB (3,3',5,5'-tetramethylbenzidine sulfate) and leads to a change from colorless to blue in solution color, which provides a sensing platform for the label-free visual detection of Tb(3+). Using above sensing platform, a selective and sensitive label-free visual method for the detection of trace Tb(3+) was developed. The proposed method can be used to detect as low as 1.13×10(-7) M of Tb(3+) by the naked eyes observation and 9.0×10(-9) M of Tb(3+) by UV-vis spectrophotometry with a better stability and reproducibility. Compared with K(+)-promoted G-quadruplex-hemin DNAzyme reported in previous study, the novel Tb(3+)-promoted G-quadruplex-hemin DNAzyme has much higher peroxidase activity and better specificity, which lead to a great potential in the development of optical, electrochemical and chemiluminescence DNAzyme-based biosensors.     

Electrochemical behavior of L-cysteine and its detection at carbon nanotube electrode modified with platinum

The electrochemical behavior of L-cysteine (CySH) on platinum (Pt)/carbon nanotube (CNT) electrode was investigated by cyclic voltammetry. CNTs used in this study were grown directly on graphite disk by chemical vapor deposition. Pt was electrochemically deposited on the activated CNT/graphite electrode by electroreduction of Pt(IV) complex ion on the surface of CNTs. Among graphite, CNT/graphite, and Pt/CNT electrodes, improved electrochemical behavior of CySH oxidation was found with Pt/CNT electrode. On the other hand, a sensitive CySH sensor was developed based on Pt/CNT/graphite electrode. A linear calibration curve can be observed in the range of 0.5 microM-0.1 mM. The detection limit of the Pt/CNT electrode is 0.3 microM (signal/nose=3). Effects of pH, scan rate, and interference of other oxidizable amino acids were also investigated and discussed. Additionally, the reproducibility, stability, and applicability of the Pt/CNT electrode were evaluated.     

Sensitive dual DNAzymes-based sensors designed by grafting self-blocked G-quadruplex DNAzymes to the substrates of metal ion-triggered DNA/RNA-cleaving DNAzymes

A universal label-free metal ion sensor design strategy was developed on the basis of a metal ion-specific DNA/RNA-cleaving DNAzyme and a G-quadruplex DNAzyme. In this strategy, the substrate strand of the DNA/RNA-cleaving DNAzyme was designed as an intramolecular stem-loop structure, and a G-rich sequence was caged in the double-stranded stem and could not form catalytically active G-quadruplex DNAzyme. The metal ion-triggered cleavage of the substrate strand could result in the release of the G-rich sequence and subsequent formation of a catalytic G-quadruplex DNAzyme. The self-blocking mechanism of the G-quadruplex DNAzyme provided the sensing system with a low background signal. The signal amplifications of both the DNA/RNA-cleaving DNAzyme and the G-quadruplex DNAzyme provided the sensing system with a high level of sensitivity. This sensor design strategy can be used for metal ions with reported specific DNA/RNA-cleaving DNAzymes and extended for metal ions with unique properties. As examples, dual DNAzymes-based Cu(2+), Pb(2+) and Hg(2+) sensors were designed. These "turn-on" colorimetric sensors can simply detect Cu(2+), Pb(2+) and Hg(2+) with high levels of sensitivity and selectivity, with detection limits of 4nM, 14nM and 4nM, respectively.     

An ultrasensitive supersandwich electrochemical DNA biosensor based on gold nanoparticles decorated reduced graphene oxide

In this article, a supersandwich-type electrochemical biosensor for sequence-specific DNA detection is described. In design, single-strand DNA labeled with methylene blue (MB) was used as signal probe, and auxiliary probe was designed to hybridize with two different regions of signal probe. The biosensor construction contained three steps: (i) capture DNA labeled with thiol was immobilized on the surface of gold nanoparticles decorated reduced graphene oxide (Au NPs/rGO); (ii) the sandwich structure formation contained “capture–target–signal probe”; and (iii) auxiliary probe was introduced to produce long concatamers containing signal molecule MB. Differential pulse voltammetry (DPV) was used to monitor the DNA hybridization event using peak current changes of MB in phosphate-buffered saline (PBS) containing 1.0 M NaClO₄. Under optimal conditions, the peak currents of MB were linear with the logarithm of the concentration of target DNA in the range of 0.1 μM to 0.1 fM with a detection limit of 35 aM (signal/noise = 3). In addition, this biosensor exhibited good selectivity even for single-base mismatched target DNA detection.     

Design of a sandwich-mode amperometric biosensor for detection of PML/RARα fusion gene using locked nucleic acids on gold electrode

In this study, a novel DNA electrochemical probe (locked nucleic acid, LNA) was designed and involved in constructing an electrochemical DNA biosensor for detection of promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene in acute promyelocytic leukemia for the first time. This biosensor was based on a 'sandwich' sensing mode, which involved a pair of LNA probes (capture probe immobilized at electrode surface and biotinyl reporter probe as an affinity tag for streptavidin-horseradish peroxidase (streptavidin-HRP). Since biotin can be connected with streptavidin-HRP, this biosensor offered an enzymatically amplified electrochemical current signal for the detection of target DNA. In the simple hybridization system, DNA fragment with its complementary DNA fragment was evidenced by amperometric detection, with a detection limit of 74 fM and a linear response range of 0.1-10 pM for synthetic PML/RARα fusion gene in acute promyelocytic leukemia (APL). Otherwise, the biosensor showed an excellent specificity to distinguish the complementary sequence and different mismatch sequences. The new pattern also exhibited high sensitivity and selectivity in mixed hybridization system.     

A novel reagentless amperometric immunosensor based on gold nanoparticles/TMB/Nafion-modified electrode

A novel reagentless immunosensor was fabricated by immobilization of redox mediator 3,3',5,5'-tetramethylbenzidine (TMB) on the Nafion (Nf) film modified glassy carbon electrode. Gold nanoparticles were assembled onto the TMB/Nafion film modified electrode to provide active sites for the immobilization of antibody molecules. The antibody (anti-MIgG), in the present study, was fixed on the electrode for the rapid detection of antigen molecules (MIgG as a model analyte). The results showed that the immunosensor based on the immobilized TMB redox mediator exhibited good electrochemical response. A good linear relationship between peak current and the concentration of the MIgG was obtained in the concentration range from 4 to 120ng/mL. The detection limit was estimated to be 1ng/ml. Under the optimized conditions, the immunosensor exhibits good sensitivity, reproducibility and stability.     

Sensitive detection of proteins using assembled cascade fluorescent DNA nanotags based on rolling circle amplification

A novel cascade fluorescence signal amplification strategy based on the rolling circle amplification (RCA)-aided assembly of fluorescent DNA nanotags as fluorescent labels and multiplex binding of the biotin-streptavidin system was proposed for detection of protein target at ultralow concentration. In the strategy, fluorescent DNA nanotags are prepared relying on intercalating dye arrays assembled on nanostructured DNA templates by intercalation between base pairs. The RCA product containing tandem-repeat sequences could serve as an excellent template for periodic assembly of fluorescent DNA nanotags, which were presented per protein recognition event to numerous fluorescent DNA nanotags for assay readout. Both the RCA and the multiplex binding system showed remarkable amplification efficiency, very little nonspecific adsorption, and low background signal. Using human IgG as a model protein, the designed strategy was successfully demonstrated for the ultrasensitive detection of protein target. The results revealed that the strategy exhibited a dynamic response to human IgG over a three-decade concentration range from 1.0 pM to 1.0 fM with a limit of detection as low as 0.9 fM. By comparison with the assay of multiple labeling antibodies with the dye/DNA conjugate, the limit of detection was improved by 4 orders. The designed signal amplification strategy would hold great promise as a powerful tool to be applied for the ultrasensitive detection of target protein in immunoassay.     

Bi-enzyme functionlized hollow PtCo nanochains as labels for an electrochemical aptasensor

In this work, a new signal amplification strategy based on hollow PtCo nanochains (HPtCoNCs) functionalized by bi-enzyme-horseradish peroxidase mimicking DNAzyme (HRP-DNAzyme) and glucose oxidase (GOD), as well as ferrocene-labeled secondary thrombin aptamer (Fc-TBA 2), is developed to construct a highly sensitive electrochemical aptasensor. The HRP-DNAzyme contains a special G-quadruplex structure with an intercalated hemin. With the surface area enlarged by HPtCoNCs, the amount of immobilized Fc-TBA 2, hemin and GOD can be enhanced. Under the enzyme catalysis of GOD, d-glucose is rapidly oxidized into gluconic acid accompanying with the generation of H?O?, which is further electrocatalyzed by Pt nanoparticles and HPR-DNAzyme to improve the electrochemical signal of Fc. With several amplification factors mentioned above, a wide linear ranged from 0.001 to 30 nM is acquired with a relatively low detection limit of 0.39 pM for thrombin. The present work demonstrates that using HPtCoNCs as labels is a promising way to amplify the analysis signal and improve the sensitivity of aptasensors.     

A label-free electrochemical DNA sensor based on exonuclease III-aided target recycling strategy for sequence-specific detection of femtomolar DNA

The present work demonstrates a rapid, single-step and ultrasensitive label-free and signal-off electrochemical sensor for specific DNA detection with excellent discrimination ability for single-nucleotide polymorphisms, taking advantage of Exonuclease III (Exo III)-aided target recycling strategy to achieve signal amplification. Exo III has a specifical exo-deoxyribonuclease activity for duplex DNAs in the direction from 3' to 5' terminus, however its activity on the duplex DNAs with 3'-overhang and single-strand DNA is limited. In response to the specific features of Exo III, the proposed E-DNA sensor is designed such that, in the presence of target DNA, the electrode self-assembled signaling probe hybridizes with the target DNA to form a duplex in the form of a 3'-blunt end at signaling probe and a 3'-overhang end at target DNA. In this way, Exo III specifically recognizes this structure and selectively digests the signaling probe. As a result, the target DNA dissociates from the duplex and recycles to hybridize with a new signaling probe, leading to the digestion of a large amount of signaling probes gradually. A redox mediator, Ru(NH(3))(6)(3+) (RuHex) is employed to electrostatically adsorbed onto signaling probes, which is directly related to the amount and the length of the signaling probes remaining in the electrode, and provides a quantitative measure of sequence-specific DNA with the experimentally measured (not extrapolated) detection limit as low as 20 fM. Moreover, this E-DNA sensor has an excellent differentiation ability for single mismatches with fairly good stability.     

Enzyme-amplified electrochemical biosensor for detection of PML-RARα fusion gene based on hairpin LNA probe

In this study, an enzyme-amplified electrochemical biosensor was developed for detection of the promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene in acute promyelocytic leukemia (APL). This new sensor employs a hairpin locked nucleic acids (LNAs) probe dually labeled with biotin and carboxyfluorescein molecule (FAM). The probe is immobilized at a streptavidin-modified electrode surface via the biotin-streptavidin bridge, and FAM serves as an affinity tag for the peroxidase conjugate binding. Initially, the immobilized hairpin probe was in the "closed" state in the absence of the target, which shielded FAM from being approached by the bulky anti-FAM-HRP conjugate due to the steric effect. Target binding opens the hairpin structure of the probe, the probe undergoes a significant conformational change, forcing FAM away from the electrode. As a result, the FAM label becomes accessible by the anti-FAM-HRP, and the target hybridization event can be sensitively transduced via the enzymatically amplified electrochemical current signal. This new biosensor demonstrates its excellent specificity for single-base mismatch and able to detect as little as 83 fM target DNA even in the presence of human serum. We also employed this sensor to directly detect PCR real sample with satisfactory results.     

Flexible glucose sensor using CVD-grown graphene-based field effect transistor

In this paper, a new concept to achieve improved probe-target recognition has been devised by introducing a novel class of DNA-functionalized three-dimensional (3D), stand-free, and nanostructured electrodes. The gold nanofibrous electrodes were created using MHZ ultrafast laser material processing in air at ambient conditions. The developed nanofibrous DNA biosensor was characterized by cyclic voltammetry with the use of ferrocyanide as an electrochemical redox indicator. Currently, electrochemical signal enhancement which is of great significance for improving the sensitivity in DNA detection remains a great challenge. Through, enhanced surface area-to-volume ratio and more efficient arrangement of probe molecules on nanofibrous electrodes, our newly developed electrode system overcomes some of the sensitivity challenges of the existing systems. This nanofiber-based system realizes femtomolar (fM) sensitivity toward complementary target DNA, and demonstrates a very wide dynamic range (from 1 fM to 1 nM).     

A sensitive signal-on assay for MTase activity based on methylation-responsive hairpin-capture DNA probe

This work develops a simple, sensitive and signal-on electrochemical sensor for methyltransferase (MTase) activity analysis. The sensor is composed of a methylene blue-modi?ed "signaling DNA probe" and a "capture DNA probe" tethered methylation-responsive hairpin DNA (hairpin-capture DNA probe). The thiol- modified hairpin-capture DNA probe at 5' end was firstly self-assembled on gold electrode via Au-S bonding. Methylation-induced scission of hairpin-capture DNA probe would displace the hairpin section and remain the "capture DNA probe" section on the gold electrode. Subsequently, the remained "capture DNA probe" on the gold electrode can hybridize with the methylene blue-modi?ed "signaling DNA probe", mediating methylene blue onto the gold electrode surface to generate redox current. It was eT on state. The developed facile signal-on electrochemical sensing system showed a linear response to concentration of Dam MTase range from 0.1 to 1.0 U/mL. The detection limit of Dam MTase activity was determined to be 0.07 U/mL and the total detection time is 7h. The sensor also has the ability to provide information about the dynamics of methylation process. Furthermore, we demonstrated that this sensor could be utilized to screen inhibitors or drugs for Dam MTase.     

Rapid and sensitive colorimetric detection of ascorbic acid in food based on the intrinsic oxidase‐like activity of MnO2 nanosheets

In this paper, we report a colorimetric sensor for the rapid, selective detection of ascorbic acid (AA) in aqueous solutions. Single‐layered MnO₂ nanosheets were established as an artificial oxidase; consequently colorless 3,3´,5,5´‐tetramethylbenzidine (TMB) was oxidized to a blue product (oxTMB), with increase in absorbance at 650 nm. The absorbance of the reaction system decreased after introduction AA, which reduced MnO₂ into Mn²⁺. Under optimum conditions, a detection limit of 62.81 nM for AA in aqueous solutions could be achieved. The linear response range for AA was 0.25–30 μM with a correlation coefficient of 0.996. Importantly, the MnO₂ nanosheet–TMB chromogenic reaction exhibited great selectivity as there was no interference from other metal ions, amino acids and small biological molecules. The proposed colorimetric sensing of AA could be applied for fruit, juice and pharmaceutical samples. Moreover, the proposed sensor showed satisfying performance, including low cost, easy preparation, rapid detection, and good biocompatibility.     

A novel homogenous detection method based on the self-assembled DNAzyme labeled DNA probes with SWNT conjugates and its application in detecting pathogen

In this paper, a novel and cost-effective homogeneous detection method was constructed for the detection of genomic DNA and Staphylococcus aureus (S. aureus), based on the noncovalent assembly of DNAzyme-labeled detection probe and single-walled carbon nanotubes (SWNTs). When the target genomic DNA and hemin was existed in the detection solution, the detection probe wrapped on the SWNTs by π-stacking interactions would keep away from SWNTs and form a DNAzyme-self-assembly construction. This DNAzyme construction could catalyze 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS2?) and generate a colored product which could lead to the absorbance changes. Hence, according to its catalyzed capacity, the DNAzyme construction could amplify the detection signal. The concentration of target DNA could be quantified by exploiting their optical absorption changes at 414 nm and the concentration limit of detection of the method was 30 nM. And this detection method detected S. aureus quantitatively. In addition, this work proved that the method obtain higher detection sensitivity compared with the method without SWNTs because of the protection profile of SWNTs towards the detection probe.     

Ultrasensitive electrochemical detection of Bacillus thuringiensis transgenic sequence based on in situ Ag nanoparticles aggregates induced by biotin-streptavidin system

A novel electrochemical biosensor was developed for detecting short DNA oligonucleotide of Bacillus thuringiensis (Bt) transgenic sequence based on Ag nanoparticle aggregates. To fabricate this DNA biosensor, the thiol-modified capture DNA (cDNA) was first anchored on gold (Au) electrode, and then the target DNA (tDNA) was hybridized with the immobilized cDNA. Subsequently, the probe DNA (pDNA) functionalized by biotinylated Ag nanoparticle was associated with the fixed tDNA, and the single Ag nanoparticle label was obtained (cited as SAg label). Finally, dissociative biotinylated Ag nanoparticle was bound to the resultant biotinylated SAg label assembled on Au electrode by virtue of bridge molecule streptavidin (SA) through biotin-SA specific interaction, which could lead to in situ aggregate of Ag nanoparticles on Au electrode and induce a novel tag including multiple Ag nanoparticles (cited as MAg tag). The novel tag exhibited excellent electroactive property in the solid-state Ag/AgCl process and was successfully applied to Bt transgenic sequence assay. A detection limit of 10 fM was achieved, which was improved by three orders of magnitude as compared to the SAg label. Furthermore, this novel DNA biosensor demonstrated a good selectivity towards tDNA.     

DNA-decorated nanoparticles as nanosensors for rapid detection of ascorbic acid

We designed an assay for rapid detection of ascorbic acid (AA) with a DNAzyme cleaving its DNA substrate in the presence of Cu(2+) and AA. The sensor consists of two DNA strands that form a complex between each other. The 5'-end of the DNAzyme binds the substrate DNA via Watson-Crick bonding and the 3'-end binds through formation of a DNA-triplex via Hoogsteen hydrogen bonding. The substrate DNA was prepared by two different methods. In the first case the nucleic acid was modified with fluorescein/dabcyl FRET pair across the cleavage site. In the second case the nucleic acid modified with fluorescein was immobilised on gold nanoparticles. DNAzyme contains a loop forming a complex with Cu(2+) ions. The oxidation of ascorbic acid (AA) with oxygen yields hydrogen peroxide. The latter interacts with Cu(2+) to give hydroxyl radicals. They break substrate DNA in close vicinity to the copper/DNA complex to separate fluorescein from gold nanoparticles leading to the increase in fluorescence intensity. Use of substrate DNA modified with the fluorescein/dabcyl couple allowed to measure AA concentration within 3 min with the detection limit of 2.5 μM. Employment of gold nanoparticles decorated with fluorescein-modified DNA allowed to improve the detection limit of AA quantification by two orders of magnitude due to enhanced cleavage of DNA catalysed by Au clusters. Fructose, sucrose, glucose, urea, and citric acid did not interfere with our assay even at concentration of 1mM. Good selectivity allowed us to apply our rapid and sensitive assays to detection of AA in vitamin C tablets, urine and orange juice.     

Diamond-like carbon (DLC) microelectrode for electrochemical ELISA

A diamond-like carbon (DLC) microelectrode was applied to commercial ELISA kits for medical diagnosis of HIV (human immunodeficiency virus), HBV (human hepatitis B virus), HCV (human hepatitis C virus). In this work, quantification of oxidized 3,3',5,5'-tetramethylbenzidine (TMB) was carried out by using a microelectrode made of boron-doped DLC and cyclic voltammetric analysis method without the conventional quenching step which uses sulfuric acid. The microelectrode provided well-known step-shaped graphs, and limit of detection could be improved by clear determination of electrochemical oxidative and reductive peaks. To demonstrate the applicability of DLC microelectrode to conventional ELISA kits, commercial ELISA kits for detection of HIV antigen, HBV antigen and HCV antigen were also tested. These results proved that the applicability of DLC microelectrode to practical detection is feasible.     

Development of an electrochemical DNA biosensor with a high sensitivity of fM by dendritic gold nanostructure modified electrode

In this paper, dendritic gold nanostructure (DenAu) modified electrode was obtained by direct electrodeposition of planar electrode into 2.8 mM HAuCl(4) and 0.1 M H(2)SO(4) solution under a very negative potential of -1.5 V. Scanning electron microscopy was used to characterize the growth evolution of DenAu with time. The whole DNA biosensor fabrication process based on the DenAu modified electrode was characterized by cyclic voltammetry and electrochemical impedance spectroscopy methods with the use of ferricyanide as an electrochemical redox indicator. The probe DNA immobilization and hybridization with target DNA on the modified electrode could be well distinguished by using methylene blue as an electrochemical hybridization indicator. The DenAu modified electrode could realize an ultra sensitivity of 1 fM toward complementary target DNA and a very wide dynamic detection range (from 1 fM to 1 nM).     

A novel and simple route to prepare a Pt nanoparticle-loaded carbon nanofiber electrode for hydrogen peroxide sensing

A facile wet-chemical method was developed to prepare a novel Pt nanoparticle-loaded carbon nanofiber (Pt/CNF) electrode. Without using any stabilizer or pretreatment procedure, large amounts of Pt nanoparticles could be well deposited on the surface of the electrospun CNF electrode at room temperature, as revealed by scanning electron microscopy (SEM). The effect of the precursor concentration on the formation of Pt catalysts was investigated to optimize the performance of the proposed hybrid electrode. When applied to the electrochemical detection of hydrogen peroxide (H?O?), the Pt/CNF electrode exhibited low overpotential, fast response and high sensitivity. A low detection limit of 0.6 μM with wide linear range of 1-800 μM (R=0.9991) was achieved at the Pt/CNF electrode, which was superior to that obtained with other H?O? electrochemical sensors reported previously. In addition, the Pt/CNF electrode showed good selectivity for H?O? detection in the presence of ascorbic acid (AA), acetaminophenol (AP) and uric acid (UA) under physiological pH condition. The attractive analytical performances and facile preparation method made this novel hybrid electrode promising for the development of effective H?O? sensors.     

Nanovesicle-based bioelectronic nose platform mimicking human olfactory signal transduction

We developed a nanovesicle-based bioelectronic nose (NBN) that could recognize a specific odorant and mimic the receptor-mediated signal transmission of human olfactory systems. To build an NBN, we combined a single-walled carbon nanotube-based field effect transistor with cell-derived nanovesicles containing human olfactory receptors and calcium ion signal pathways. Importantly, the NBN took advantages of cell signal pathways for sensing signal amplification, enabling ≈ 100 times better sensitivity than that of previous bioelectronic noses based on only olfactory receptor protein and carbon nanotube transistors. The NBN sensors exhibited a human-like selectivity with single-carbon-atomic resolution and a high sensitivity of 1 fM detection limit. Moreover, this sensor platform could mimic a receptor-meditated cellular signal transmission in live cells. This sensor platform can be utilized for the study of molecular recognition and biological processes occurring at cell membranes and also for various practical applications such as food screening and medical diagnostics.