Interactions of gelsolin and gelsolin-actin complexes with actin. Effects of calcium on actin nucleation, filament severing, and end blocking

Gelsolin is a calcium binding protein that shortens actin filaments. This effect occurs in the presence but not in the absence of micromolar calcium ion concentrations and is partially reversed following removal of calcium ions. Once two actin molecules have bound to gelsolin in solutions containing Ca2+, one of the actins remains bound following chelation of calcium, so that the reversal of gelsolin's effect cannot be accounted for simply by its dissociation from the ends of the shortened filaments to allow for elongation. In this paper, the interactions with actin of the ethylene glycol bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) stable 1:1 gelsolin-actin complexes are compared with those of free gelsolin. The abilities of free or complexed gelsolin to sever actin filaments, nucleate filament assembly, bind to the fast growing (+) filament ends, and lower the filament size distribution in the presence of either Ca2+ or EGTA were examined. The results show that both free gelsolin and gelsolin-actin complexes are highly dependent on Ca2+ concentration when present in a molar ratio to actin less than 1:50. The gelsolin-actin complexes, however, differ from free gelsolin in that they have a higher affinity for (+) filament ends in EGTA and they cannot sever filaments in calcium. The limited reversal of actin-gelsolin binding following removal of calcium and the calcium sensitivity of nucleation by complexes suggest an alternative to reannealing of shortened filaments that involves redistribution of actin monomers and may account for the calcium-sensitive functional reversibility of the solation of actin by gelsolin.     

Characterization of the Ca2+-induced conformational changes in gelsolin and identification of interaction regions between actin and gelsolin

Serum gelsolin, a Ca2+-dependent protein regulating the length of actin filaments, undergoes conformational changes upon binding Ca2+. These were detected and analyzed by several approaches including ultraviolet difference spectroscopy, circular dichroism studies, analytical ultracentrifugation, thiol group titration, and limited proteolytic digestions. The effect of Ca2+ binding on the UV absorption difference spectrum and the near-UV circular dichroism spectrum was consistent with changes in the environments of tyrosine and phenylalanine residues. In the presence of Ca2+, the S0(20),w value decreased from 5.3 to 4.7. This latter result implies a transformation to a more asymmetric molecular shape. Gelsolin contained only two accessible thiol groups per mole of protein, one of which was titratable in the native protein; it was more accessible to 5,5'-dithiobis(2-nitrobenzoic acid) in the absence than in the presence of Ca2+. The limited digestion of gelsolin from serum and bovine aorta smooth muscle by two different proteases, chymotrypsin and trypsin, proceeded much faster in the presence of Ca2+ than in its absence with the production of three main fragments of about 40K, 32K, and 21K. This fragment mixture was found still able to shorten F-actin in a Ca2+-dependent manner; this severing activity was expressed by the isolated 40K peptide. Gelsolin was cross-linked to F- and G-actin by the zero-length cross-linker 1-ethyl-3-[3-(dimethylamino)propyl]-carbodiimide (EDC), generating a covalent 130K binary complex (actin1-gelsolin1) followed by a covalent 180K ternary complex (actin2-gelsolin1).(ABSTRACT TRUNCATED AT 250 WORDS)     

Gelsolin as a calcium-regulated actin filament-capping protein.

Various concentrations of gelsolin (25-100 nM) were added to 2 microM polymerized actin. The concentrations of free calcium were adjusted to 0.05-1.5 microM by EGTA/Ca2+ buffer. Following addition of gelsolin actin depolymerization was observed that was caused by dissociation of actin subunits from the pointed ends of treadmilling actin filaments and inhibition by gelsolin of polymerization at barbed ends. The time course of depolymerization revealed an initial lag phase that was followed by slow decrease of the concentration of polymeric actin to reach the final steady state polymer and monomer concentration. The initial lag phase was pronounced at low free calcium and low gelsolin concentrations. On the basis of quantitative analysis the kinetics of depolymerization could be interpreted as capping, i.e. binding of gelsolin to the barbed ends of actin filaments and subsequent inhibition of polymerization, rather than severing. The main argument for this conclusion was that even gelsolin concentrations (100 nM) that exceed the concentration of filament ends ( approximately 2 nM), cause the filaments to depolymerize at a rate that is similar to the rate of depolymerization of the concentration of pointed ends existing before addition of gelsolin. The rate of capping is directly proportional to the free calcium concentration. These experiments demonstrate that at micromolar and submicromolar free calcium concentrations gelsolin acts as a calcium-regulated capping protein but not as an actin filament severing protein, and that the calcium binding sites of gelsolin which regulate the various functions of gelsolin (capping, severing and monomer binding), differ in their calcium affinity.     

Covalent complexes formed between plasma gelsolin and actin with a zero-length cross-linking compound

Actin and plasma gelsolin were covalently cross-linked with the zero-length cross-linker 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide. Two major intermolecularly linked products were identified on polyacrylamide gels. By use of 14C-labeled actin and 125I-labeled gelsolin, these were shown to be the 1:1 and 2:1 complexes of actin with gelsolin, respectively. The higher molecular weight complex predominated under all conditions tested including the presence and absence of Ca2+. In titration experiments in which actin at different concentrations was reacted with a fixed concentration of gelsolin, end points were obtained for the formation of both cross-linked species at about two actins per gelsolin, implying that a 2:1 noncovalent complex is cross-linked. In 0.1 mM Ca2+, the extent of cross-linking was independent of protein concentration down to 50 nM gelsolin. At low Ca2+ concentrations (less than 10(-8)M), the extent of cross-linking was very much reduced at micromolar gelsolin and fell to zero at about 100 nM gelsolin. The binding of actin to gelsolin to give a cross-linkable complex is therefore very strong at 0.1 mM Ca2+ but much weaker at low Ca2+ concentrations.     

Interaction of plasma gelsolin with G-actin and F-actin in the presence and absence of calcium ions

Plasma gelsolin formed a very tight 1:2 complex with G-actin in the presence of Ca2+, but no interaction between gelsolin and G-actin was detected in the presence of excess EGTA. However, the 1:2 complex dissociated into a 1:1 gelsolin:actin complex and monomeric actin when excess EGTA was added. Plasma gelsolin bound tightly to the barbed ends of actin filaments and also severed filaments in the presence of Ca2+ and bound weakly to the filament barbed end in the presence of EGTA. The 1:2 gelsolin-actin complex bound to the barbed ends of filaments but did not sever them. By blocking the barbed end of filaments with plasma gelsolin, we determined the critical concentration at the pointed end in 1 mM MgCl2 and 0.2 mM ATP to be 4 microM. The dissociation rate constant for ADP-G-actin from the pointed end was estimated to be about 0.4 s-1 and the association rate constant to be about 5 X 10(4) M-1 s-1. Finally, we obtained evidence that plasma gelsolin accelerates but does not bypass the nucleation step and, therefore, that the concentration of gelsolin does not directly determine the concentration of filaments polymerized in its presence. Thus, gelsolin-capped filaments may not provide an absolutely reliable method for determining the rate constant for the association of ATP-G-actin at the pointed ends of filaments, but a reasonable estimate would be 1 X 10(5) M-1 s-1 in 1 mM MgCl2 and 0.2 mM ATP.     

Ca2+ regulation of gelsolin activity: binding and severing of F-actin.

Regulation of the F-actin severing activity of gelsolin by Ca2+ has been investigated under physiologic ionic conditions. Tryptophan fluorescence intensity measurements indicate that gelsolin contains at least two Ca2+ binding sites with affinities of 2.5 x 10(7) M-1 and 1.5 x 10(5) M-1. At F-actin and gelsolin concentrations in the range of those found intracellularly, gelsolin is able to bind F-actin with half-maximum binding at 0.14 microM free Ca2+ concentration. Steady-state measurements of gelsolin-induced actin depolymerization suggest that half-maximum depolymerization occurs at approximately 0.4 microM free Ca2+ concentration. Dynamic light scattering measurements of the translational diffusion coefficient for actin filaments and nucleated polymerization assays for number concentration of actin filaments both indicate that severing of F-actin occurs slowly at micromolar free Ca2+ concentrations. The data suggest that binding of Ca2+ to the gelsolin-F-actin complex is the rate-limiting step for F-actin severing by gelsolin; this Ca2+ binding event is a committed step that results in a Ca2+ ion bound at a high-affinity, EGTA-resistant site. The very high affinity of gelsolin for the barbed end of an actin filament drives the binding reaction equilibrium toward completion under conditions where the reaction rate is slow.     

Rheological studies on calcium-sensitive gelation of actin filaments by actinogelin

Actinogelin, a regulatory protein of cell motility, enhanced gelation of actin filaments in the absence of calcium ions, only on standing still or with very low velocity gradients ( less than 0.1 s-1). The Ca2+-sensitive action of actinogelin on action filaments was dependent on a weak external force. In the presence of a micromolar level of Ca2+, actinogelin did not affect the network formation of actin filaments at all.     

Kinetic analysis of F-actin depolymerization in the presence of platelet gelsolin and gelsolin-actin complexes

Platelet gelsolin (G), a 90,000-mol-wt protein, binds tightly to actin (A) and calcium at low ionic strength to form a 1:2:2 complex, GA2Ca2 (Bryan, J., and M. Kurth, 1984, J. Biol. Chem. 259:7480-7487). Chromatography of actin and gelsolin mixtures in EGTA-containing solutions isolates a stable binary complex, GA1Ca1 (Kurth, M., and J. Bryan, 1984, J. Biol. Chem. 259:7473-7479). The effects of platelet gelsolin and the binary gelsolin-actin complex on the depolymerization kinetics of rabbit skeletal muscle actin were studied by diluting pyrenyl F-actin into gelsolin or complex-containing buffers; a decrease in fluorescence represents disassembly of filaments. Dilution of F- actin to below the critical concentration required for filament assembly gave a biphasic depolymerization curve with both fast and slow components. Dilution into buffers containing gelsolin, as GCa2, increased the rate of depolymerization and gave a first order decay. The rate of decrease in fluorescence was found to be gelsolin concentration dependent. Electron microscopy of samples taken shortly after dilution into GCa2 showed a marked reduction in filament length consistent with filament severing and an increase in the number of ends. Conversely, occupancy of the EGTA-stable actin-binding site by an actin monomer eliminated the severing activity. Dilution of F-actin into the gelsolin-actin complex, either as GA1Ca1 or GA1Ca2, resulted in a decrease in the rate of depolymerization that was consistent with filament end capping. This result indicates that the EGTA-stable binding site is required and must be unoccupied for filament severing to occur. The effectiveness of gelsolin, GCa2, in causing filament depolymerization was dependent upon the ionic conditions: in KCI, actin filaments appeared to be more stable and less susceptible to gelsolin, whereas in Mg2+, actin filaments were more easily fragmented. Finally, a comparison of the number of kinetically active ends generated when filaments were diluted into gelsolin versus the number formed when gelsolin can function as a nucleation site suggests that gelsolin may sever more than once. The data are consistent with a mechanism where gelsolin, with both actin-binding sites unoccupied, can sever but not cap F-actin. Occupancy of the EGTA-stable binding site yields a gelsolin-actin complex that can no longer sever filaments, but can cap filament ends.     

Study of a protein complex from the brain which reduces actin viscosity. II. The complex inhibits elongation of actin filaments at the end preferable for polymerization and fragments the filaments

Functional properties of the protein complex from bovine brain that shortens actin filaments are described. In the presence of Ca2+ complex shortens actin filaments and increases the initial rate of actin polymerization. In the absence of free calcium ions the complex loses its accelerating effect on actin polymerization, but still possesses actin filament shortening activity. Neither phalloidin nor tropomyosin prevent the shortening of actin filaments induced by the protein complex. Therefore the protein complex causes the fragmentation of actin filament. The data on actin polymerization in the presence of F-actin nuclei have indicated that the protein complex inhibits the elongation step of actin polymerization. The analysis of elongation in the presence of both the protein complex and cytochalasin D has demonstrated that the inhibition occurs on the fast-growing end of actin filaments.     

Polyphosphoinositide micelles and polyphosphoinositide-containing vesicles dissociate endogenous gelsolin-actin complexes and promote actin assembly from the fast-growing end of actin filaments blocked by gelsolin

The Ca2+-activated actin-binding protein gelsolin regulates actin filament length by severing preformed filaments and by binding actin monomers, stabilizing nuclei for their assembly into filaments. Gelsolin binds to phosphatidylinositol 4,5-bisphosphate (PIP2), with consequent inhibition of its filament severing activity and dissociation of EGTA-resistant complexes made with rabbit macrophage or human plasma gelsolin and rabbit muscle actin. This study provides evidence for an interaction of gelsolin with phosphatidylinositol monophosphate (PIP) as well as PIP2 and further describes their effects on gelsolin's function. Both phosphoinositides completely dissociate EGTA-insensitive rabbit macrophage cytoplasmic gelsolin-actin complexes and inhibit gelsolin's severing activity. The magnitude of inhibition depends strongly on the physical state of the phosphoinositides, being maximal in preparations that contain small micelles of either purified PIP or PIP2. Aggregation of PIP or PIP2 micelles by divalent cations or insufficient sonication or their incorporation into vesicles containing other phospholipids decreases but does not eliminate the inhibitory properties of the polyphosphoinositides. The presence of gelsolin partly inhibits the divalent cation-induced aggregation of PIP2 micelles. PIP2 in combination with EGTA inactivates gelsolin molecules that block the fast-growing end of actin filaments, thereby accelerating actin polymerization. Regulation of gelsolin by the intracellular messengers Ca2+ and polyphosphoinositides allows for the formation of several different gelsolin-actin intermediates with distinct functional properties that may be involved in changes in the state of cytoplasmic actin following cell stimulation.     

Structure and mobility of actin filaments as measured by quasielastic light scattering, viscometry, and electron microscopy

Actin filaments of different lengths were prepared by polymerizing actin in the presence of various concentrations of gelsolin, a protein which accelerates actin polymerization by stabilizing nuclei from which filaments grow and which binds to their fast growing ends. The lengths of the actin filaments following polymerization were measured by electron microscopy and showed that the number-average filament length agreed with the predicted length if each gelsolin molecule acted as a seed for the growth of an actin filament. The distribution of lengths was independent of the actin:gelsolin ratio and was similar to that of actin filaments polymerized in the absence of gelsolin (Lw/Ln = 1.8). The mobility of these filaments in solution was studied by quasielastic light scattering and by viscometry. The translational diffusion constant determined by quasielastic light scattering was in agreement with the infinite dilution values calculated from the dimensions and the distribution of lengths determined by electron microscopy for relatively short filament lengths. Under conditions where overlap of the rotational domains of the filaments would be expected to occur, the measured diffusion rates deviated from their predicted dilute solution values and the solution viscosity increased abruptly. The dependence of the diffusion constant and the solution viscosity on the length of the actin filaments can be explained in terms of a theory that describes the restraints on diffusion of independent rigid rods in semi-dilute solution. The results suggest that the rheology of actin filaments can be accounted for by steric restraints. The length of cytoplasmic actin filaments in some cell types is such that these steric constraints are significant and could produce large changes in physical properties with small changes in filament length.     

Ca2+ control of actin filament length. Effects of macrophage gelsolin on actin polymerization

Gelsolin complexes with calcium (gelsolin-Ca2+) binds to the ends of actin filaments to which monomers add preferentially during elongation. It forms a stable complex with actin in a low ionic strength solution which does not normally favor the polymerization of actin. Gelsolin-Ca2+ increases the rate of nucleation of actin which precedes polymerization, but decreases the rate of elongation of the filaments. The final average length of filaments formed in the presence of gelsolin-Ca2+ is shorter and the equilibrium monomer concentration increases relative to actin polymerized in the absence of gelsolin-Ca2+. Gelsolin-Ca2+ also increases the number of actin filaments because the magnitude of the increase in monomer concentration is disproportionately small compared with the reduction in polymer length. In these respects, the population of actin filaments formed during polymerization in the presence of gelsolin-Ca2+ is similar to that resulting from the action of gelsolin on previously assembled actin filaments (Yin, H. L., Zaner, K. S., and Stossel, T. P. (1980) J. Biol. Chem. 255, 9494-9500). The calcium-dependent shortening of ects, the population of actin filaments formed during polymerization in the presence of gelsolin-Ca2+ is similar to that resulting from the action of gelsolin on previously assembled actin filaments (Yin, H. L., Zaner, K. S., and Stossel, T. P. (1980) J. Biol. Chem. 255, 9494-9500). The calcium-dependent shortening of ects, the population of actin filaments formed during polymerization in the presence of gelsolin-Ca2+ is similar to that resulting from the action of gelsolin on previously assembled actin filaments (Yin, H. L., Zaner, K. S., and Stossel, T. P. (1980) J. Biol. Chem. 255, 9494-9500). The calcium-dependent shortening of actin filaments is the primary mechanism for the dissolution of an actin gel by gelsolin. Therefore, the ability of gelsolin to produce short filaments irrespective of the initial state of assembly of the actin offers flexibility for controlling the network structure of the cytoplasm in which either the monomeric or polymeric form of actin molecules might predominate at different times.     

Calcium-dependent interaction of actin filaments with actin binding protein in the presence of calmodulin and caldesmon

Caldesmon, calmodulin-, and actin-binding protein of chicken gizzard did not affect the process of polymerization of actin induced by 0.1 M KCl. Caldesmon binds to F-actin, thus inhibiting the gelation action of actin binding protein (ABP; filamin). Low shear viscosity and flow birefringence measurements revealed that in a system of calmodulin, caldesmon, ABP, and F-actin, gelation occurs in the presence of micromolar Ca2+ concentrations, but not in the absence of Ca2+. Electron microscopic observations showed the Ca2+-dependent formation of actin bundles in this system. These results were interpreted by the flip-flop mechanism: in the presence of Ca2+, a calmodulin-caldesmon complex is released from actin filaments on which ABP exerts its gelating action. On the other hand, in the absence of Ca2+, caldesmon remains bound to actin filaments, thus preventing the action of ABP.     

The bundling of actin with polyethylene glycol 8000 in the presence and absence of gelsolin.

Actin filament and bundle formation occur in the cytosol under conditions of very high total macromolecular concentration. In this study we have utilized the inert molecule polyethylene glycol 8000 (PEG) as a means of simulating crowded conditions in vitro. Column-purified Ca-actin was polymerized in the absence and presence of gelsolin (to regulate mean filament lengths between 50 and 5000 mers) and PEG (2-8%) using various concentrations of KCl and/or 2 mM divalent cations. Bundling was characterized by the scattered light intensity and mean diffusion coefficients obtained from dynamic light scattering, as well as by fluorescence and phase-contrast microscopy. The minimum concentration of KCl required for bundling decreases both with increasing concentration of PEG at a fixed mean filament length, and with decreasing filament length at a fixed concentration of PEG. In the absence of divalent cation, bundling is reversible on dilution, as determined by intensity levels, diffusion coefficients, and microscopy. However, with either 2 mM Mg2+ or Ca2+ added, bundling is irreversible under conditions of higher PEG concentrations or longer filaments, indicating that osmotic pressure effects cannot fully explain actin bundling with PEG. Weaker divalent cation-binding sites on actin as well as disulfide bonds appear to be involved in the irreversible bundling.     

Molecular biology of gelsolin, a calcium-regulated actin filament severing protein

Gelsolin is a Ca2+-binding protein of mammalian leukocytes, platelets and other cells which has multiple and closely regulated powerful effects on actin. In the presence of micromolar Ca2+, gelsolin severs actin filaments, causing profound changes in the consistency of actin polymer networks. A variant of gelsolin containing a 25-amino acid extension at the NH2-terminus is present in plasma where it may be involved in the clearance of actin filaments released during tissue damage. Gelsolin has two sites which bind actin cooperatively. These sites have been localized using proteolytic cleavage and monoclonal antibody mapping techniques. The NH2-terminal half of the molecule contains a Ca2+-insensitive actin severing domain while the COOH-terminal half contains a Ca2+-sensitive actin binding domain which does not sever filaments. These data suggest that the NH2-terminal severing domain in intact gelsolin is influenced by the Ca2+-regulated COOH-terminal half of the molecule. The primary structure of gelsolin, deduced from human plasma gelsolin cDNA clones, supports the existence of actin binding domains and suggests that these may have arisen from a gene duplication event, and diverged subsequently to adopt their respective unique functions. The plasma and cytoplasmic forms of gelsolin are encoded by a single gene, and preliminary results indicate that separate mRNAs code for the two forms. Further application of molecular biological techniques will allow exploration into the structural basis for the multifunctionality of gelsolin, as well as the molecular basis for the genesis of the cytoplasmic and secreted forms of gelsolin.     

Effect of pH on the mechanism of actin polymerization

The effect of pH on the Mg2+-induced polymerization of rabbit skeletal muscle G-actin at 20 degrees C was examined. Polymerization data were obtained at various initial concentrations of Mg2+, Ca2+, and G-actin between pH 6 and 7.5. The data were found to fit a kinetic mechanism for actin polymerization previously proposed at pH 8 in which Mg2+ binding at a moderate-affinity site on actin induces an isomerization of the protein enabling more favorable nucleation [Frieden, C. (1982) J. Biol. Chem. 257, 2882-2886]. The data also suggest the formation of actin dimers induced by Mg2+ binding is over 2 orders of magnitude more favorable at pH 6 than at pH 8. Little effect on trimer formation is found over this pH range. In addition, the conformation induced by nonspecific binding of metal to low-affinity sites becomes more favorable as the pH is lowered. The critical concentration for filament formation is also decreased at lower pH. The kinetic data do not support fragmentation occurring under any of the conditions examined. Furthermore, as Mg2+ exchange for Ca2+ at a high-affinity site (Kd less than 10(-9) M) fails to alter significantly the polymerization kinetics, Ca2+ release from this site appears unnecessary for either the nucleation or the elongation of actin filaments.     

Actin assembly by lithium ions.

The ability of Li+ to promote the assembly of actin has been compared with the more common cations used in actin assembly assays, K+, Mg2+, and Ca2+. The principal assay of actin assembly utilized was fluorescence photobleaching recovery (FPR), from which it is possible to determine the fraction of actin protomers incorporated into filaments and the average diffusion coefficients of the filaments. In addition, critical concentrations of actin over a range of concentrations of all of these cations have been determined using an assay that involves sonication and dilution of assembled actin filaments containing trace amounts of pyrene-labeled actin. The results demonstrate that Li+ is a more potent promoter of actin assembly than is K+. The more rapid assembly of actin in the presence of Li+ is attributable to an increased rate of filament elongation. Filaments assembled in equivalent concentrations of Li+ or K+ have the same diffusion coefficients, and thus presumably the same average lengths. The critical concentration of actin is about three times less in the presence of Li+ than in the presence of an equal concentration of K+. Cytochalasin D accelerates the rate of Li+-promoted actin assembly and reduces slightly the total fraction of actin assembly. However, cytochalasin D causes less shortening of filaments in the presence of Li+ than in the presence of K+ or Mg2+. By the criteria of assembly kinetics and critical concentration, Li+ is much less potent as a promoter of actin assembly than either Mg2+ or Ca2+. These results are discussed in terms of the role of electrostatic forces in the actin assembly mechanism and in terms of possible relationships to therapeutic and toxicity mechanisms for Li+.     

Interaction of gelsolin with covalently cross-linked actin dimer.

One of the two actin molecules in the ternary actin-gelsolin complex was selectively cross-linked to gelsolin when benzophenonemaleimide-actin (BPM-actin) was used [Doi, Y., Banba, M., & Vertut-Doi (1991a) Biochemistry 30, 5769-5777]. Here, we examine the interaction between gelsolin and BPM-actin dimer in which BPM-actin is covalently conjugated to unlabeled actin by p-phenylenedimaleimide (pPDM). BPM-actin dimer having an apparent molecular mass of 115 kDa is photo-cross-linked to gelsolin (90 kDa) more effectively than BPM-actin monomer in the presence of Ca2+, forming a cross-linked actin dimer-gelsolin (1:1) complex with a molecular mass of 210 kDa. The tight direct association of the dimer to gelsolin is shown by the titration of gelsolin with the fluorescently labeled dimer and by the higher concentration of phosphatidylinositol 4,5-bisphosphate required to inhibit the formation of BPM-dimer complex with gelsolin than that of BPM-monomer complex. However, an attempt to cross-link the two actin molecules in the ternary actin-gelsolin (2:1) complex by pPDM fails. The results argue that the topography of the two actin molecules in the actin-gelsolin (2:1) complex is similar, but not identical, to that of the barbed end of an actin filament.     

Ca2+-dependent binding of severin to actin: a one-to-one complex is formed

Severin is a protein from Dictyostelium that severs actin filaments in a Ca2+-dependent manner and remains bound to the filament fragments (Brown, S. S., K. Yamamoto, and J. A. Spudich , 1982, J. Cell Biol., 93:205-210; Yamamoto, K., J. D. Pardee , J. Reidler , L. Stryer , and J. A. Spudich , 1982, J. Cell Biol. 95:711-719). Further characterization of the interaction of severin with actin suggests that it remains bound to the preferred assembly end of the fragmented actin filaments. Addition of severin in molar excess to actin causes total disassembly of the filaments and the formation of a high-affinity complex containing one severin and one actin. This severin -actin complex does not sever actin filaments. The binding of severin to actin, measured directly by fluorescence energy transfer, requires micromolar Ca2+, as does the severing and depolymerizing activity reported previously. Once bound to actin in the presence of greater than 1 microM Ca2+, severin is not released from the actin when the Ca2+ is lowered to less than 0.1 microM by addition of EGTA. Tropomyosin, DNase I, phalloidin, and cytochalasin B have no effect on the ability of severin to bind to or sever actin filaments. Subfragment 1 of myosin, however, significantly inhibits severin activity. Severin binds not only to actin filaments, but also directly to G-actin, as well as to other conformational species of actin.     

Chimeric and truncated gCap39 elucidate the requirements for actin filament severing and end capping by the gelsolin family of proteins.

gCap39 is an actin filament end-capping protein which has a threefold repeated domain structure similar to the N-terminal half of gelsolin. However, unlike gelsolin, gCap39 does not sever actin filaments and dissociates completely from filament ends after calcium removal. We have capitalized on these differences to explore the structural basis for actin filament capping, severing, and their regulation. Using truncated gCap39, generated by limited proteolysis or deletion mutagenesis, we found that actin filament capping requires multiple gCap domains, and almost the entire molecule is necessary for optimal activity. gCap39 domain I, like the equivalent domain in gelsolin, contains an actin monomer binding site. gCap39 domains II-III are, however, different from gelsolin in that they do not bind to the side of actin filaments. Since filament side binding is hypothesized to be the first step in severing, lack of side binding may explain why gCap39 does not sever. This is confirmed directly by swapping gCap39 domains II-III for the side-binding gelsolin domains to generate a chimera which severs actin filaments. The chimera is Ca2+ independent in actin filament severing and capping, although gCap39 domain I itself is regulated by Ca2+.