Cellulose solvent-based biomass pretreatment breaks highly ordered hydrogen bonds in cellulose fibers of switchgrass

The switchgrass (SG) samples pretreated by cellulose solvent‐ and organic solvent‐based lignocellulose fractionation were characterized by enzymatic hydrolysis, substrate accessibility assay, scanning electron microscopy, X‐ray diffraction (XRD), cross polarization/magic angle spinning (CP/MAS) ¹³C nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FTIR). Glucan digestibility of the pretreated SG was 89% at hour 36 at one filter paper unit of cellulase per gram of glucan. Crystallinity index (CrI) of pure cellulosic materials and SG before and after cellulose solvent‐based pretreatment were determined by XRD and NMR. CrI values varied greatly depending on measurement techniques, calculation approaches, and sample drying conditions, suggesting that the effects of CrI data obtained from dried samples on enzymatic hydrolysis of hydrated cellulosic materials should be interpreted with caution. Fast hydrolysis rates and high glucan digestibilities for pretreated SG were mainly attributed to a 16.3‐fold increase in cellulose accessibility to cellulase from 0.49 to 8.0 m²/g biomass, because the highly ordered hydrogen‐bonding networks in cellulose fibers of biomass were broken through cellulose dissolution in a cellulose solvent, as evidenced by CP/MAS ¹³C‐NMR and FTIR. Biotechnol. Bioeng. 2011; 108:521–529. © 2010 Wiley Periodicals, Inc.     

Enhancement of the enzymatic digestibility of sugarcane bagasse by steam pretreatment impregnated with hydrogen peroxide

Sugarcane bagasse was subjected to steam pretreatment impregnated with hydrogen peroxide. Analyses were performed using 2³ factorial designs and enzymatic hydrolysis was performed at two different solid concentrations and with washed and unwashed material to evaluate the importance of this step for obtaining high cellulose conversion. Similar cellulose conversion were obtained at different conditions of pretreatment and hydrolysis. When the cellulose was hydrolyzed using the pretreated material in the most severe conditions of the experimental design (210°C, 15 min and 1.0% hydrogen peroxide), and using 2% (w/w) water‐insoluble solids (WIS), and 15 FPU/g WIS, the cellulose conversion was 86.9%. In contrast, at a milder pretreatment condition (190°C, 15 min and 0.2% hydrogen peroxide) and industrially more realistic conditions of hydrolysis (10% WIS and 10 FPU/g WIS), the cellulose conversion reached 82.2%. The step of washing the pretreated material was very important to obtain high concentrations of fermentable sugars. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Fibrobacter succinogenes S85 ferments ball-milled cellulose as fast as cellobiose until cellulose surface area is limiting

Fibrobacter succinogenes S85 grew rapidly on cellobiose (0.31 h⁻¹) and the absolute rate of increase in fermentation acids was 0.68 h⁻¹. Cultures that were provided with ball-milled cellulose initially produced fermentation acids and microbial protein as fast as those provided with cellobiose, but the absolute cellulose digestion rate eventually declined. If the inoculum size was increased, the kinetics decayed from first to zero order (with respect to cells) even sooner, but in each case the absolute rate declined after only 20 to 30% of the cellulose had been fermented. Congo red binding indicated that the cellulose surface area of individual cellulose particles was not decreasing, and the transition of ball-milled cellulose digestion corresponded with the appearance of unbound cells in the culture supernatant. When bound cells from partially digested cellulose were removed and the cellulose was re-incubated with a fresh inoculum, the initial absolute fermentation rate was as high as the one observed for undigested cellulose and cellobiose. Based on these results, cellulose digestion by F. succinogenes S85 appears to be constrained by cellulose surface area rather than cellulase activity per se. Received: 19 January 2000 / Received revision: 18 April 2000 / Accepted: 1 May 2000     

A pore‐hindered diffusion and reaction model can help explain the importance of pore size distribution in enzymatic hydrolysis of biomass

Until now, most efforts to improve monosaccharide production from biomass through pretreatment and enzymatic hydrolysis have used empirical optimization rather than employing a rational design process guided by a theory‐based modeling framework. For such an approach to be successful a modeling framework that captures the key mechanisms governing the relationship between pretreatment and enzymatic hydrolysis must be developed. In this study, we propose a pore‐hindered diffusion and kinetic model for enzymatic hydrolysis of biomass. When compared to data available in the literature, this model accurately predicts the well‐known dependence of initial cellulose hydrolysis rates on surface area available to a cellulase‐size molecule. Modeling results suggest that, for particles smaller than 5 × 10^?3 cm, a key rate‐limiting step is the exposure of previously unexposed cellulose occurring after cellulose on the surface has hydrolyzed, rather than binding or diffusion. However, for larger particles, according to the model, diffusion plays a more significant role. Therefore, the proposed model can be used to design experiments that produce results that are either affected or unaffected by diffusion. Finally, by using pore size distribution data to predict the biomass fraction that is accessible to degradation, this model can be used to predict cellulose hydrolysis with time using only pore size distribution and initial composition data. Biotechnol. Bioeng. 2013; 110: 127–136. © 2012 Wiley Periodicals, Inc.     

Treatment of Furfural Residue by Solvent Extraction for Enzymatic Hydrolysis: Effect of Delignification on the Structure and Digestibility

The effect of different treatments on the enzymatic hydrolysis of furfural residue (FR) was investigated in delignification and structural features. In this case, hot water, ethanol, sodium hydroxide, alkali ethanol, and alkaline hydrogen peroxide solution (AHP) were selected as the delignification solvents. The structure and morphology of the original and treated samples were comparatively studied by diffuse reflectance infrared Fourier transform spectrometry (DRIFT), XRD, SEM, and CP/MAS ¹³C NMR. After AHP treatment, the ratio of total lignin to cellulose content in FR and the absorbance ratio of lignin to cellulose (A ₁₅₀₈/A ₁₀₅₇) on the sample surface in the DRIFT spectra was reduced from 0.99 to 0.13 and from 0.40 to 0.04, respectively, which resulted in the highest conversion of cellulose to glucose (99.3 %). It was found that the crystallinity index of FR linearly increased with the decrease of total lignin to cellulose ratio. DRIFT analysis indicated that the high lignin content on the sample surface resulted in a low enzymatic hydrolysis efficiency.     

Mechanism of initial rapid rate retardation in cellobiohydrolase catalyzed cellulose hydrolysis

Despite intensive research, the mechanism of the rapid retardation in the rates of cellobiohydrolase (CBH) catalyzed cellulose hydrolysis is still not clear. Interpretation of the hydrolysis data has been complicated by the inability to measure the catalytic constants for CBH‐s acting on cellulose. We developed a method for measuring the observed catalytic constant (k^obs) for CBH catalyzed cellulose hydrolysis. It relies on in situ measurement of the concentration of CBH with the active site occupied by the cellulose chain. For that we followed the specific inhibition of the hydrolysis of para‐nitrophenyl‐β‐D ‐lactoside by cellulose. The method was applied to CBH‐s TrCel7A from Trichoderma reesei and PcCel7D from Phanerochaete chrysosporium and their isolated catalytic domains. Bacterial microcrystalline cellulose, Avicel, amorphous cellulose, and lignocellulose were used as substrates. A rapid decrease of k^obs in time was observed on all substrates. The k^obs values for PcCel7D were about 1.5 times higher than those for TrCel7A. In case of both TrCel7A and PcCel7D, the k^obs values for catalytic domains were similar to those for intact enzymes. A model where CBH action is limited by the average length of obstacle‐free way on cellulose chain is proposed. Once formed, productive CBH–cellulose complex proceeds with a constant rate determined by the true catalytic constant. After encountering an obstacle CBH will “get stuck” and the rate of further cellulose hydrolysis will be governed by the dissociation rate constant (k_off), which is low for processive CBH‐s. Biotechnol. Bioeng. 2010;106: 871–883. © 2010 Wiley Periodicals, Inc.     

Effects of cellulase on the modification of cellulose

Multicomponent cellulases, purified endoglucanases and cellobiohydrolases were assayed and shown to modify pure natural cellulose (softwood pulp). Changes in structure and properties of the cellulose caused by enzymatic treatment depend on the composition, the type of enzyme, and the treatment conditions. The reactivity of cellulose for some dissolving and derivatization processes may be improved by enzymatic hydrolysis. Endoglucanases decreased the average degrees of polymerization (DP) and improved the alkaline solubility of cellulose most efficiently. The variation in the supramolecular structure estimated from the infrared spectra of the cellulose samples was found to be correlated with the reactivity and might represent wide variations in conformation caused by the breakdown of the hydrogen bonds.     

Ultrasound mediated enzymatic hydrolysis of cellulose and carboxymethyl cellulose

A recombinant Trichoderma reesei cellulase was used for the ultrasound‐mediated hydrolysis of soluble carboxymethyl cellulose (CMC) and insoluble cellulose of various particle sizes. The hydrolysis was carried out at low intensity sonication (2.4–11.8 W cm^?2 sonication power at the tip of the sonotrode) using 10, 20, and 40% duty cycles. [A duty cycle of 10%, for example, was obtained by sonicating for 1 s followed by a rest period (no sonication) of 9 s.] The reaction pH and temperature were always 4.8 and 50°C, respectively. In all cases, sonication enhanced the rate of hydrolysis relative to nonsonicated controls. The hydrolysis of CMC was characterized by Michaelis‐Menten kinetics. The Michaelis‐Menten parameter of the maximum reaction rate V_max was enhanced by sonication relative to controls, but the value of the saturation constant K_m was reduced. The optimal sonication conditions were found to be a 10% duty cycle and a power intensity of 11.8 W cm^?2. Under these conditions, the maximum rate of hydrolysis of soluble CMC was nearly double relative to control. In the hydrolysis of cellulose, an increasing particle size reduced the rate of hydrolysis. At any fixed particle size, sonication at a 10% duty cycle and 11.8 W cm^?2 power intensity improved the rate of hydrolysis relative to control. Under the above mentioned optimal sonication conditions, the enzyme lost about 20% of its initial activity in 20 min. Sonication was useful in accelerating the enzyme catalyzed saccharification of cellulose. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1448–1457, 2013     

An amperometric enzyme biosensor for real‐time measurements of cellobiohydrolase activity on insoluble cellulose

An amperometric enzyme biosensor for continuous detection of cellobiose has been implemented as an enzyme assay for cellulases. We show that the initial kinetics for cellobiohydrolase I, Cel7A from Trichoderma reesei, acting on different types of cellulose substrates, semi‐crystalline and amorphous, can be monitored directly and in real‐time by an enzyme‐modified electrode based on cellobiose dehydrogenase (CDH) from Phanerochaete chrysosporium (Pc). PcCDH was cross‐linked and immobilized on the surface of a carbon paste electrode which contained a mediator, benzoquinone. An oxidation current of the reduced mediator, hydroquinone, produced by the CDH‐catalyzed reaction with cellobiose, was recorded under constant‐potential amperometry at +0.5 V (vs. Ag/AgCl). The CDH‐biosensors showed high sensitivity (87.7 µA mM^?1 cm^?2), low detection limit (25 nM), and fast response time (t_95% ～ 3 s) and this provided experimental access to the transient kinetics of cellobiohydrolases acting on insoluble cellulose. The response from the CDH‐biosensor during enzymatic hydrolysis was corrected for the specificity of PcCDH for the β‐anomer of cello‐oligosaccharides and the approach were validated against HPLC. It is suggested that quantitative, real‐time data on pure insoluble cellulose substrates will be useful in attempts to probe the molecular mechanism underlying enzymatic hydrolysis of cellulose. Biotechnol. Bioeng. 2012; 109: 3199–3204. © 2012 Wiley Periodicals, Inc.     

Reduced Mesoporous Co3O4 Nanowires as Efficient Water Oxidation Electrocatalysts and Supercapacitor Electrodes

While electrochemical water splitting is one of the most promising methods to store light/electrical energy in chemical bonds, a key challenge remains in the realization of an efficient oxygen evolution reaction catalyst with large surface area, good electrical conductivity, high catalytic properties, and low fabrication cost. Here, a facile solution reduction method is demonstrated for mesoporous Co₃O₄ nanowires treated with NaBH₄. The high‐surface‐area mesopore feature leads to efficient surface reduction in solution at room temperature, which allows for retention of the nanowire morphology and 1D charge transport behavior, while at the same time substantially increasing the oxygen vacancies on the nanowire surface. Compared to pristine Co₃O₄ nanowires, the reduced Co₃O₄ nanowires exhibit a much larger current of 13.1 mA cm^‐2 at 1.65 V vs reversible hydrogen electrode (RHE) and a much lower onset potential of 1.52 V vs RHE. Electrochemical supercapacitors based on the reduced Co₃O₄ nanowires also show a much improved capacitance of 978 F g^‐1 and reduced charge transfer resistance. Density‐functional theory calculations reveal that the existence of oxygen vacancies leads to the formation of new gap states in which the electrons previously associated with the Co‐O bonds tend to be delocalized, resulting in the much higher electrical conductivity and electrocatalytic activity.     

Cellulose Fermentation by a Rumen Anaerobic Fungus in Both the Absence and the Presence of Rumen Methanogens

The fermentation of cellulose by an ovine rumen anaerobic fungus in the absence and presence of rumen methanogens is described. In the monoculture, moles of product as a percentage of the moles of hexose fermented were: acetate, 72.7; carbon dioxide, 37.6; formate, 83.1; ethanol, 37.4; lactate, 67.0; and hydrogen, 35.3. In the coculture, acetate was the major product (134.7%), and carbon dioxide increased (88.7%). Lactate and ethanol production decreased to 2.9 and 19%, respectively, little formate was detected (1%), and hydrogen did not accumulate. Substantial amounts of methane were produced in the coculture (58.7%). Studies with [2-¹⁴C]acetate indicated that acetate was not a precursor of methane. The demonstration of cellulose fermentation by a fungus extends the range of known rumen organisms capable of participating in cellulose digestion and provides further support for a role of anaerobic fungi in rumen fiber digestion. The effect of the methanogens on the pattern of fermentation is interpreted as a shift in flow of electrons away from electron sink products to methane via hydrogen. The study provides a new example of intermicrobial hydrogen transfer and the first demonstration of hydrogen formation by a fungus.     

Pore Structure Controlling the Activity of Mesoporous Crystalline CsTaWO6 for Photocatalytic Hydrogen Generation

The quaternary oxide CsTaWO₆ exhibits a very high activity for photocatalytic hydrogen generation and water splitting. To improve its properties with regard to photocatalytic applications, it is prepared with mesoporous morphology for the first time, utilizing a template‐based evaporation‐induced self‐assembly process. The resulting material exhibits a median mesopore size of 10 nm, a surface area of 60 m² g^?1, and high crystallinity after preparation at 550 °C with phase‐pure defect‐pyrochlore structure. To further improve the textural properties of mesoporous CsTaWO₆, the addition of additives to the synthesis procedure is also investigated. By using H₂SO₄/HCl and a carbonization/oxidation procedure, the surface area of the resulting mesoporous CsTaWO₆ is increased to 78 m² g^?1, which is a 20‐fold increase compared to a nonporous reference via sol‐gel preparation, also leading to improved photocatalytic activity. By investigating the ability for photocatalytic hydrogen generation, the importance of high surface area and pore diameter of the resulting materials in comparison to nonporous materials is presented. Interestingly, the photocatalytic activity does not increase linearly with surface area, due to a strong influence of the pore diameter on the photocatalytic activity.     

A mechanistic model for rational design of optimal cellulase mixtures

A model‐based framework is described that permits the optimal composition of cellulase enzyme mixtures to be found for lignocellulose hydrolysis. The rates of hydrolysis are shown to be dependent on the nature of the substrate. For bacterial microcrystalline cellulose (BMCC) hydrolyzed by a ternary cellulase mixture of EG2, CBHI, and CBHII, the optimal predicted mixture was 1:0:1 EG2:CBHI:CBHII at 24 h and 1:1:0 at 72 h, at loadings of 10 mg enzyme per g substrate. The model was validated with measurements of soluble cello‐oligosaccharide production from BMCC during both single enzyme and mixed enzyme hydrolysis. Three‐dimensional diagrams illustrating cellulose conversion were developed for mixtures of EG2, CBHI, CBHII acting on BMCC and predicted for other substrates with a range of substrate properties. Model predictions agreed well with experimental values of conversion after 24 h for a variety of enzyme mixtures. The predicted mixture performances for substrates with varying properties demonstrated the effects of initial degree of polymerization (DP) and surface area on the performance of cellulase mixtures. For substrates with a higher initial DP, endoglucanase enzymes accounted for a larger fraction of the optimal mixture. Substrates with low surface areas showed significantly reduced hydrolysis rates regardless of mixture composition. These insights, along with the quantitative predictions, demonstrate the utility of this model‐based framework for optimizing cellulase mixtures. Biotechnol. Bioeng. 2011;108: 2561–2570. © 2011 Wiley Periodicals, Inc.     

Function of a Low Molecular Weight Peptide from <Emphasis Type="Italic">Trichoderma pseudokoningii</Emphasis> S38 During Cellulose Biodegradation

The biochemical mechanism for cellulose decomposition by a low molecular weight peptide, named short fiber generating factor (SFGF), derived from the culture supernatant of a cellulolytic fungus Trichoderma pseudokoningii S-38, was determined. Sufficient information obtained by biochemical and biophysical studies and combined with observation with a scanning electron microscope provided further evidence for the earlier studies that the SFGF had a high capacity for chelating and reducing ferric ions, and could produce free radical by reduction of Fe³⁺ to Fe²⁺ in the presence of oxygen molecule. These studies suggested that the effect of SFGF on cellulose is directly related to an oxidative reaction and is different from the hydrolysis of cellulose by cellulases. The alcoholic hydroxyl groups in cellulose can be oxidized by SFGF, which leads to destruction of the hydrogen bond network in cellulose and cleavage of glycosidic linkages. Both effects led to the de-polymerization of cellulose and the formation of short fibers, and increase of reducing groups in residual cellulose, then the cellulose substrates became more susceptible for hydrolysis by cellulases. Received: 8 May 2002 / Accepted: 22 July 2002     

Optimization of protein extraction from Gelidiella acerosa by carbohydrases using response surface methodology

In this study, application of response surface methodology for enzymic pretreatment optimization of Gelidiella acerosa was investigated in order to improve the extraction of algal proteins using Viscozyme L and Celluclast 1.5L. The total protein, soluble proteins and reducing sugar recovery in the water‐soluble fraction were studied in relation to the hydrolysis time, type and concentration of the enzymes. Enzymatic digestion appeared to be an effective treatment for protein extraction. While enzyme hydrolysis by Celluclast 1.5L was able to facilitate the protein extraction, it was a relatively inefficient way to improve protein extraction yield, in comparison with Viscozyme L. The optimum conditions for protein extraction was found to be hydrolysis by 2.8 μL mL^?1 of Viscozyme L for 12 h.     

Nanocellulose 3, 5‐Dimethylphenylcarbamate Derivative Coated Chiral Stationary Phase: Preparation and Enantioseparation Performance

Nanocrystalline cellulose (NCC) with high surface area and high ordered crystalline structure was prepared from microcrystalline cellulose (MCC) under the hydrolysis of sodium hypochlorite. NCC was further reacted with 3,5‐dimethylphenyl isocyanate to obtain the nanocellulose derivative, and then coated successfully on the surface of silica gel to a prepared NCC‐coated chiral stationary phase (CSP) as a new kind of chiral separation material. Similarly, MCC derivative‐coated CSP was also prepared as contrast. The chiral separation performance of NCC‐based CSP was evaluated and compared with MCC‐based CSP by high‐performance liquid chromatography. Moreover, the effects of the alcohol modifiers, mobile phase additives, and flow rates on chiral separations were investigated in detail. The results showed that 10 chiral compounds were separated on NCC‐based CSP with better peak shape and higher column efficiency than MCC‐based CSP, which confirmed that NCC‐based CSP was a promising packing material for the resolution of chiral compounds.Chirality 28:376–381, 2016. © 2016 Wiley Periodicals, Inc.     

The Physicochemical Investigation of 17β-Estradiol Crystalline Prepared by <Emphasis Type="Italic">In Situ</Emphasis> pH-Dependent Solubility Technique with Polyvinylpyrrolidone

Micro-particles of 17β-estradiol (ED) were prepared with polyvinylpyrrolidone (PVP) by in situ pH-dependent solubility technique. Products were characterized using multiple instruments, and molecular interactions between ED and PVP were explored. Powder X-ray diffraction and thermal analysis revealed crystalline ED in the micro-particles is hemihydrated. PVP was also present in the micro-particles. Laser particle size analysis and scanning electron microscopy revealed thin slice morphology, which might have resulted from the influence of PVP. Moreover, the results of contact angle, specific surface area, and dynamic vapor sorption showed that the surface properties of products were improved. These physicochemical properties of the micro-particles resulted in an obvious improvement in dissolution rate. Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance revealed hydrogen bonding between ED and PVP. A method was established for the preparation of micro-particles through the addition of PVP during the reaction process.     

Enzymatic hydrolysis of cellulose in a membrane bioreactor: assessment of operating conditions

The optimization of operating conditions for cellulose hydrolysis was systemically undertaken using an ultra-scaled down membrane bioreactor based on the parameter scanning ultrafiltration apparatus. The bioconversion of cellulose saccharification was carried out with freely suspended cellulase from Aspergillus niger as the biocatalyst. The polyethersulfone ultrafiltration membranes with a molecular weight cutoff of 10 kDa were used to construct the enzymatic membrane bioreactor, with the membrane showing a complete retaining of cellulase and cellobiase. The influence of solution pH, temperature, salt (NaCl) concentration, presence of cellobiase, cellulose-to-enzyme ratio and stirring speed on reducing sugar production was examined. The results showed that the addition of an appropriate amount of NaCl or cellobiase had a positive effect on reducing sugar formation. Under the identified optimal conditions, cellulose hydrolysis in the enzymatic membrane bioreactor was tested for a long period of time up to 75 h, and both enzymes and operation conditions demonstrated good stability. Also, the activation energy (E _a) of the enzymatic hydrolysis, with a value of 34.11 ± 1.03 kJ mol⁻¹, was estimated in this study. The operational and physicochemical conditions identified can help guide the design and operation of enzymatic membrane bioreactors at the industrial scale for cellulose hydrolysis.     

Hypersensitivity of SV40-Transforme Cells to the Action of Tunicamycin

The manufacturing processes used determined the physicochemical properties of the three kinds of rice food, garaeduk, bagsulgi, and cooked rice. The initial rate of hydrolysis by porcine pancreatic α-amylase (PPA) was affected by the food form. The firmer structure of garaeduk was apparently responsible for the difficulty in maceration, resulting in less digestion than with easily digestible food for the same maceration time. The initial rate of hydrolysis of each rice product by PPA increased with increasing maceration time in a Waring Blender for all of the processed rice products. The postprandial glucose and insulin responses to the three processed rice products were also studied in ten patients with type 2 diabetes mellitus (4 men and 6 women aged 56.8±2.3 yr; duration of diabetes, 3.6±1.2 yr; body mass index (BMI), 23.7±2.6 kg/m²; fasting serum glucose, 143.9±5.1 mg/dl; serum insulin, 20.8±2.2 μU/ml). Each subject ingested of the three rice foods after a 12-h overnight fast, and the serum glucose and insulin levels were measured over a 0–240 min period. The postprandial serum glucose and insulin levels at 90 min after ingesting bagsulgi and cooked rice were less than those at 60 min, while the levels at 90 min after ingesting garaeduk were higher than those at 60 min. Garaeduk also significantly decreased the incremental responses of glucose and insulin when compared with bagsulgi and cooked rice. The results suggest that garaeduk would be the most unlikely to increase the postprandial serum glucose and insulin levels among the three rice foods. The food form, which eventually differentiated each food by its specific surface area with the same degree of maceration because of the characteristic physical strength, therefore affected the rate of rice starch hydrolysis both in vitro and in vivo.