Structure of the complex group-specific polysaccharide of group B Streptococcus

The group-specific antigen was isolated from a type Ia group B streptococcal strain and is a complex polysaccharide composed of alpha-L-rhamnopyranosyl, alpha-D-galactopyranosyl, 2-acetamido-2-deoxy-beta-D-glucopyranosyl, D-glucitol, and phosphate residues. The complexity of the group B polysaccharide antigen is evident from the fact that when depolymerized by basic hydrolysis it yielded three structurally related, but nevertheless significantly different, oligosaccharides. These oligosaccharides were obtained in different molar quantities as their monophosphate esters. This evidence strongly suggests that they are linked by phosphodiester bonds in the original group B antigen. If these oligosaccharides are in fact randomly situated throughout the linear polysaccharide, then this type of heterogeneous repeating unit is unusual for a polysaccharide of bacterial origin. However, this structural arrangement of the oligosaccharides has yet to be unambiguously established because the alternate explanation of there being three different polysaccharides in the group B antigen cannot be discounted in the evidence presented here. The oligosaccharides were enzymatically dephosphorylated, and the structures of two of the three oligosaccharides are (formula: see text) Despite their structural differences, the two oligosaccharides are related by the smaller being an integral part of the larger. In the structural analysis of the group B antigen, methylation analysis, periodate oxidation, nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry, fast atom bombardment mass spectrometry, and various specific chemical and enzymatic degradations were the principal methods used. Of particular interest was the use of an alpha-rhamnosidase to selectively degrade the larger oligosaccharide. This facilitated the assignment of signals in its 1H and 13C NMR spectra.     

An oligosaccharide-tetanus toxoid conjugate vaccine against type III group B Streptococcus

We have developed an oligosaccharide-tetanus toxoid conjugate vaccine against type III group B Streptococcus. Purified group B streptococcal type III capsular polysaccharide was depolymerized by enzymatic digestion using endo-beta-galactosidase produced by Citrobacter freundii. Following enzymatic digestion, oligosaccharides were fractionated by gel filtration chromatography on Sephadex G-75. An oligosaccharide pool of average Mr = 14,500 (corresponding to 13.6 repeating units of the type III polysaccharide) was used for conjugation to tetanus toxoid. Tetanus toxoid was covalently coupled via a synthetic spacer molecule to the reducing end of the oligosaccharide by reductive amination. The oligosaccharide-tetanus toxoid conjugate elicited type III-specific anticapsular antibodies (measured in enzyme-linked immunosorbent assay) in three out of three rabbits whereas the unconjugated native type III polysaccharide was nonimmunogenic. Antiserum from rabbits vaccinated with the oligosaccharide-protein conjugate protected mice against lethal challenge with live group B streptococci (16 out of 16 mice survived) and opsonized group B streptococci for phagocytosis in vitro. No protection was conferred by preimmune serum nor by serum from rabbits vaccinated with unconjugated native type III polysaccharide. An oligosaccharide-protein conjugate vaccine of this design may prove to be an effective immunogen for protection against group B streptococcal infection in humans. In addition, the approach to vaccine design utilized in these studies will facilitate further definition of the structural parameters that determine immune response to glycoconjugate vaccines.     

Structural determination and immunochemical characterization of the type V group B Streptococcus capsular polysaccharide

The type V capsular polysaccharide of group B Streptococcus has been isolated and purified, and its repeating unit structure determined. The native type V polysaccharide contains D-glucose, D-galactose, 2-acetamido-2-deoxy-D-glucose, and sialic acid in a molar ratio of 3:2:1:1. Methylation analysis and 1H NMR and 13C NMR analysis of the native type V polysaccharide and of its specifically degraded products permitted the determination of the repeating unit structure of the type V polysaccharide: [formula: see text] The type V polysaccharide has certain structural features in common with other group B streptococcal capsular polysaccharides but is antigenically distinct: no immunologic cross-reactivity was observed between type V and types Ia, Ib, II, III, or IV polysaccharides. Studies of antibody binding to the partially degraded forms of the type V polysaccharide indicated that the native epitope is complex, involving most if not all of the sugar residues of the repeating unit.     

Conformational aspects critical to the immunospecificity of the type III group B streptococcal polysaccharide

Immunization of rabbits with group B type III streptococcus organisms induces two distinct populations of antibodies with a specificity for determinants on the native capsular polysaccharide antigen of these organisms. Some of the structural and conformational features of the two determinants responsible for the formation of these antibodies were elucidated by (13)C NMR and serological studies on the native type III polysaccharide and some of its structurally modified analogues. The specificity of the determinant corresponding to the major population of antibodies is dependent of the presence of sialic acid residues on the native type III antigen, and although these residues are not an integral part of the determinant, they exert conformational control over it. The carboxylate groups of the sialic acid residues are an important factor in this control mechanism which could possibly involve intramolecular hydrogen bonding. The terminal sialic acid residues control the orientation of the penultimate beta-d-galactopyranose residues with respect to the backbone of the native antigen. The orientation of these residues is critical to the determinant because the determinant is probably small and is located precisely at the junction of the same beta-d-galactopyranose residues with the backbone of the native type III antigen. The determinant corresponding to the other population of antibodies is not sialic acid dependent. This determinant is located on the backbone of the native antigen in the vicinity of the other determinant but on the opposite side to the oligosaccharide branches. In this position, its conformation is unaffected even by the removal of the oligosaccharide branches from the native antigen.     

Structure of the serotype f polysaccharide antigen of Streptococcus mutans

The structure of the serotype f polysaccharide antigen of Streptococcus mutans was determined by methylation analysis, periodate oxidation, and partial methanolysis, and the configuration of the anomeric linkages by 13C-n.m.r. spectroscopy, indicating the trisaccharide repeating unit----3)-alpha-L-Rhap-(1----2)-[alpha-D-Glcp-(1----3)]-alpha-L-+ ++Rhap- (1----. The structure of the backbone of the polysaccharide was confirmed by demonstrating immunological identity between the product of Smith degradation of the S. mutans serotype f antigen and the group A-variant streptococcal polysaccharide.     

Conformational epitope of the type III group B Streptococcus capsular polysaccharide.

The protective epitope of the type III group B streptococcal polysaccharide (GBSPIII) is length dependent and conformational. To obtain a more accurate characterization of the conformational epitope, ELISA inhibition and surface plasmon resonance studies were conducted on two GBSPIII-specific mAbs using a large panel of oligosaccharide probes. The results of the studies confirmed that 2 repeating units (RU) is the minimum binding unit and that, while increases in chain length from 2 RU to 7 RU caused further optimization of the epitope, it remained monovalent. A 3-fold increase in affinity was observed between 7 RU and 20 RU, which, by surface plasmon resonance studies on a Fab, was shown to be due to both further optimization of the individual epitope and the occurrence of multivalency of epitope. The data support our hypothesis that the conformational epitope is an extended helical segment of the GBSPIII. GBSPIII exists mainly in the random coil form, which structurally mimics short oligosaccharide self Ags, but it can infrequently and spontaneously form extended helices. Although not prevalent in GBSPIII, the immune system preferentially selects these helical epitopes because they are unique to the polysaccharide. Contrary to a previously proposed model of GBSPIII binding in which the binding of the first Ab propagates a continuum of helical epitopes, our binding kinetics are consistent only with the helical epitope's being discontinuous and infrequent.     

Structural studies on the capsular polysaccharide of Klebsiella serotype K40

The capsular polysaccharide of Klebsiella serotype K40 contained D-mannose, D-glucuronic acid, D-galactose, and L-rhamnose in the approximate molar ratios 1:1:1:2. The primary structure of the capsular polysaccharide has been investigated mainly by methylation analysis, periodate oxidation, characterization of oligosaccharides, base degradation reaction, and 1H and 13CNMR spectroscopy. The polysaccharide does not contain any pyruvic acetal or O-acetyl substitution. It has a pentasaccharide repeating unit of the following primary structure: alpha-D-Manp 1----4 ----4)-beta-D-GlcpA-(1----2)-alpha-L-Rhap-(1----3)-beta-D-Ga lp-(1----2)-alpha- L-Rhap-(1----.     

Characterization of the group-specific polysaccharide of group B Streptococcus

The group-specific polysaccharide of the group B Streptococcus was isolated by nitrous acid extraction followed by gel filtration on Sepharose 6B and chromatography on DEAE-Bio-Gel A. It was composed of rhamnose, galactose, N-acetylglucosamine, and glucitol phosphate. Mild periodate oxidation of the polysaccharide resulted in a rapid reduction in molecular weight, indicating that the glucitol was located in the backbone of the polymer. High-resolution 31P NMR showed the presence of a single type of phosphodiester bond in the molecule. Methylation analysis and several specific chemical degradations were done to determine sugar linkages. The basic structure of the group B polysaccharide consists of a backbone of 2-linked rhamnose, 2,4-linked rhamnose, and glucitol phosphate, and side chains of rhamnose(1----3)galactose(1----3)N-acetylglucosamine linked to the 4-position of a rhamnose in the backbone.     

Characterization of the linkage between the type III capsular polysaccharide and the bacterial cell wall of group B Streptococcus

The capsular polysaccharide of group B Streptococcus is a key virulence factor and an important target for protective immune responses. Until now, the nature of the attachment between the capsular polysaccharide and the bacterial cell has been poorly defined. We isolated insoluble cell wall fragments from lysates of type III group B Streptococcus and showed that the complexes contained both capsular polysaccharide and group B carbohydrate covalently bound to peptidoglycan. Treatment with the endo-N-acetylmuramidase mutanolysin released soluble complexes of capsular polysaccharide linked to group B carbohydrate by peptidoglycan fragments. Capsular polysaccharide could be enzymatically cleaved from group B carbohydrate by treatment of the soluble complexes with beta-N-acetylglucosaminidase, which catalyzes hydrolysis of the beta-D-GlcNAc(1-->4)beta-D-MurNAc subunit produced by mutanolysin digestion of peptidoglycan. Evidence from gas chromatography/mass spectrometry and (31)P NMR analysis of the separated polysaccharides supports a model of the group B Streptococcus cell surface in which the group B carbohydrate and the capsular polysaccharide are independently linked to the glycan backbone of cell wall peptidoglycan; group B carbohydrate is linked to N-acetylmuramic acid, and capsular polysaccharide is linked via a phosphodiester bond and an oligosaccharide linker to N-acetylglucosamine.     

Multiantennary group-specific polysaccharide of group B Streptococcus

The group-specific antigen of group B Streptococcus is composed of four different oligosaccharide units of Mw 766 (III), 1277 (II), 1462 (IV), and 1788 (I). The major constituent sugars of the oligosaccharides are alpha-L-rhamnopyranose, alpha-D-galactopyranose, 2-acetamido-2-deoxy-beta-D-glucopyranosyl, and D-glucitol except that III does not contain alpha-D-galactopyranosyl or 2-acetamido-2-deoxy-beta-D-glucopyranosyl residues and IV contains no D-glucitol but has one additional beta-L-rhamnopyranosyl residue. The structures of II and III have been previously elucidated [Michon, F., Katzenellenbogen, E., Kasper, D. L., & Jennings, H. J. (1987) Biochemistry 26, 476-486]. In the group B antigen all the oligosaccharides are linked by one type of phosphodiester bond from O6 of the D-glucitol residue of one oligosaccharide to O6 of the alpha-D-galactopyranosyl residue of the next to form a complex and highly branched multiantennary structure. However, despite the heterogeneous nature of its component oligosaccharides, some order has been identified in the biosynthesis of the group B antigen from chemical and enzymatic sequence studies. Because III lacks an alpha-D-galactopyranosyl residue but has a D-glucitol residue, it is situated at the reducing terminus of all the branches of the group B antigen where it is always adjacent to a II moiety. Conversely, IV has an alpha-D-galactopyranosyl residue but has no D-glucitol and is therefore located at the reducing terminus of the group B antigen where it probably functions as a linker molecule between the group B polysaccharide and the cell wall peptidoglycan of the group B streptococcal organisms. Oligosaccharide I contains two alpha-D-galactopyranosyl residues and one D-glucitol residue and thus constitutes the branch point in the group B antigen, whereas II contains one of each of the above residues and therefore is situated in linear interchain positions. The group B antigen is highly branched and probably has a unique multiantennary structure.     

Bacteriophage degradation of Klebsiella K44 polysaccharide: an n.m.r. study and chemical proof of the position of the acetate group

Bacteriophages (phi) have been used to degrade polysaccharides into oligosaccharides containing one or more of their repeating units. The capsular polysaccharide from Klebsiella K44 contains an acetate group, and n.m.r. spectroscopy and chemical methods have been employed to prove its linkage to O-6 of the 4-linked glucose residue. Phage phi 44 was shown to be an alpha-glucosidase not influenced by the acetate moiety and thus able to depolymerize the polysaccharide into pentasaccharide repeating units, some of which contained acetate on O-6 of the reducing glucose residue. The two oligosaccharides were studied by 1H- and 13C-n.m.r. spectroscopy, and their spectra were compared with those of the native and the deacetylated polysaccharide. 13C-n.m.r. was a useful tool for locating the 6-linked acetate, the position of which was confirmed by the method of temporary protection using methyl vinyl ether. The importance of using bacteriophages to obtain oligosaccharides is highlighted by the better results obtained with the oligosaccharide in comparison to the polysaccharide, both in n.m.r. spectroscopy and the temporary protection method.     

Construction of multivalent sialyl Le(x) from the type Ia group B Streptococcus capsular polysaccharide

The type Ia group B Streptococcus (GBSIa) capsular polysaccharide was specifically degraded by partial Smith oxidation of 2,3-diol of the Glc in the backbone to fragments representing asialo core repeating units. Sialylation of these oligomers furnished GBSIa multiple repeating units. One, two and three repeating units of GBSIa were obtained pure, and the higher oligomers were obtained as mixtures. After enzymatic fucosylation oligosaccharides carrying bivalent, trivalent and other multivalent sialyl Le(x) epitopes presented as appendages on an oligolactoside scaffold were obtained.     

Structural studies of the capsular polysaccharide from Streptococcus pneumoniae type 18F

The structure of the capsular polysaccharide elaborated by Streptococcus pneumoniae type 18F (S18F) has been investigated by using n.m.r. spectroscopy, methylation analysis, and characterisation of oligosaccharides obtained on partial hydrolysis. It is concluded that the polysaccharide is composed of pentasaccharide repeating-units having the following structure. (formula; see text) In this structure, the absolute configuration of the glycerol phosphate moiety has not been determined, but is assumed to be D-glycerol 1-phosphate (sn-glycerol 3-phosphate). The location of an O-acetyl group at O-6 of the terminal alpha-D-glucopyranosyl groups is tentative only.     

Structure of the group G streptococcal polysaccharide

The structure of the group-specific polysaccharide of group G Streptococcus was determined by means of methylation analysis and selective chemical degradations. The anomeric configurations and conformations of the sugar residues were studied by 1H- and 13C-n.m.r. spectroscopy. The tetrasaccharide repeating unit, ----3)-alpha-D-Galp-(1----2)-[alpha-L-Rhap-(1----3)-beta-D-GalpNAc - (1----4)]-alpha-L-Rhap-(1----, was determined.     

Structures of mucin-type sugar chains of the galactosyltransferase purified from human milk. Occurrence of the ABO and Lewis blood group determinants

The mucin-type sugar chains of human milk galactosyltransferase samples purified from two donors with different blood types were released by alkaline borohydride treatment and quantitatively labeled by N-[3H]acetylation. The radioactive oligosaccharides thus obtained were fractionated by high performance liquid chromatography and immobilized lectin chromatography, and their structures were studied by sequential digestion with endo- or exoglycosidases, methylation analysis, and periodate oxidation. It was revealed that the structures of the mucin-type sugar chains of galactosyltransferase are extremely various, and many blood group determinants are expressed on more than 13 different backbone sugar chains. The characteristic features of the sugar chains could be summarized as follows. 1) The sugar chains of both samples are composed of core 1, Gal beta 1----3GalNAc, and core 2, GlcNAc beta 1----6(Gal beta 1----3)GalNAc. 2) One or two N-acetyllactosamine repeating units extend from the core through GlcNAc beta 1----6Gal and GlcNAc beta 1----3 Gal linkages. 3) Blood group determinants are expressed in accord with the blood types of the donors: sample 1 from a donor of blood type O, Lea+b- contains oligosaccharides with Lea and X determinants, and sample 2 from a donor of B, Lea-b- contains those with H, X, Y, and B determinants.     

Structure of the extracellular polysaccharide produced by Lactobacillus delbrueckii subsp. bulgaricus 291

The lactic acid bacterium Lactobacillus delbrueckii subsp. bulgaricus 291, when grown in skimmed milk, produced 80 mg/L exopolysaccharide with an average molecular mass of 1.4 x 10(3) kDa. Monosaccharide analysis, methylation analysis, MS, and 1D/2D NMR (1H and 13C) studies performed on the native polysaccharide, and on oligosaccharides obtained from a mild acid hydrolysate of the native polysaccharide, showed the polysaccharide to consist of branched pentasaccharide repeating units with the following structure: [structure: see text].     

Conformational differences between linear alpha (2----8)-linked homosialooligosaccharides and the epitope of the group B meningococcal polysaccharide

The alpha-(2----8)-linked sialic acid oligosaccharides (NeuAc)n exhibit an unusual degree of heterogeneity in the conformation of their linkages. This was diagnosed by observation in their 13C NMR spectra of an equivalent and unique heterogeneity in the chemical shifts of their anomeric carbons and subsequently confirmed by more comprehensive 1H and 13C NMR studies. In these studies both one-dimensional and two-dimensional experiments were carried out on the trisaccharide (NeuAc)3 and colominic acid. In addition to the unambiguous assignment of the signals in the spectra, these experiments demonstrated that both linkages of (NeuAc)3 differed in conformation from each other and from the inner linkages of colominic acid. The NMR data indicate that these conformational differences extend to both terminal disaccharides of oligosaccharides larger than (NeuAc)5, a result that has considerable physical and biological significance. In the context of the group B meningococcal polysaccharide, it provides an explanation for the conformational epitope of the group B meningococcal polysaccharide, which was proposed on the evidence that (NeuAc)10, larger than the optimum size of an antibody site, was the smallest oligosaccharide able to bind to group B polysaccharide specific antibodies. Because the two terminal disaccharides of (NeuAc)10 differ in conformation to its inner residues, the immunologically functional part of (NeuAc)10 resides in its inner six residues. This number of residues is now consistent with the maximum size of an antibody site.     

Structure of the group-specific polysaccharide of group E Streptococcus

The structure of the group-specific polysaccharide of group E Streptococcus was determined by methylation, periodate oxidation, and partial methanolysis, and the configuration of the anomeric linkages by 1H- and 13C-n.m.r. spectroscopy. The trisaccharide repeating unit----2)-alpha-L-Rhap-(1----3)-[beta-D-Glcp-(1----2)]-alpha-L -Rhap-(1----was determined.     

The serotype of type Ia and III group B streptococci is determined by the polymerase gene within the polycistronic capsule operon

Streptococcus agalactiae is a primary cause of neonatal morbidity and mortality. Essential to the virulence of this pathogen is the production of a type-specific capsular polysaccharide (CPS) that enables the bacteria to evade host immune defenses. The identification, cloning, sequencing, and functional characterization of seven genes involved in type III capsule production have been previously reported. Here, we describe the cloning and sequencing of nine additional adjacent genes, cps(III)FGHIJKL, neu(III)B, and neu(III)C. Sequence comparisons suggested that these genes are involved in sialic acid synthesis, pentasaccharide repeating unit formation, and oligosaccharide transport and polymerization. The type III CPS (cpsIII) locus was comprised of 16 genes within 15.5 kb of contiguous chromosomal DNA. Primer extension analysis and investigation of mRNA from mutants with polar insertions in their cpsIII loci supported the hypothesis that the operon is transcribed as a single polycistronic message. The translated cpsIII sequences were compared to those of the S. agalactiae cpsIa locus, and the primary difference between the operons was found to reside in cps(III)H, the putative CPS polymerase gene. Expression of cps(III)H in a type Ia strain resulted in suppression of CPS Ia synthesis and in production of a CPS which reacted with type III-specific polyclonal antibody. Likewise, expression of the putative type Ia polymerase gene in a type III strain reduced synthesis of type III CPS with production of a type Ia immunoreactive capsule. Based on the similar structures of the oligosaccharide repeating units of the type Ia and III capsules, our observations demonstrated that cps(Ia)H and cps(III)H encoded the type Ia and III CPS polymerases, respectively. Additionally, these findings suggested that a single gene can confer serotype specificity in organisms that produce complex polysaccharides.     

The structure of the asparagine-linked sugar chains of bovine brain ribonuclease

The asparagine-linked sugar chains of bovine brain ribonuclease were quantitatively released as oligosaccharides from the polypeptide backbone by hydrazinolysis. After N-acetylation, they were converted into radioactively-labeled oligosaccharides by NaB3H4 reduction. The radioactive oligosaccharide mixture was fractionated by ion-exchange chromatography, and the acidic oligosaccharides were converted into neutral oligosaccharides by sialidase digestion. The neutral oligosaccharides were then fractionated by Bio-Gel P-4 column chromatography. Structural studies of each oligosaccharide by sequential exoglycosidase digestion in combination with methylation analysis revealed that bovine brain ribonuclease showed extensive heterogeneity. It contains bi- and tri-antennary, complex-type oligosaccharides having alpha-D-Manp-(1----3)-[alpha-D-Manp-(1----6)]-beta-D-Manp -(1----4)-beta-D- GlcpNAc-(1----4)-[alpha-L-Fucp-(1----6)]-D-GlcNAc as their common core. Four different outside oligosaccharide chains, i.e., beta-D-Galp-(1----4)-beta-D-GlcpNAc-(1----, alpha-Neu5Ac-(2----6)-beta-D- Galp-(1----4)-beta-D-GlcpNAc-(1----, alpha-Neu5Ac-(2----3)-beta-D-Galp-(1----4)- beta-D-GlcpNAc-(1----, and alpha-D-Galp-(1----3)-beta-D-Galp-(1----4)-beta-D-GlcpNAc-(1----, were found. The preferential distribution of the alpha-D-Galp-(1----3)-beta-D-Galp-(1----4)-beta-D-GlcpNAc group on the alpha-D-Manp-(1----6) arm is a characteristic feature of the sugar chains of this enzyme.