The material cost and stickiness of capture threads and the evolution of orb-weaving spiders

Prey capture threads are essential to the operation of spider orb-webs because they prevent insects that have been intercepted from escaping before a spider can subdue them. The volume of material invested in a web's capture threads is related to spider weight and is the same for primitive orb-weavers that produce cribellar capture thread and modern orb-weavers that produce adhesive capture thread. However, as adhesive capture thread achieves greater stickiness relative to its volume, adhesive orb-webs have a greater total stickiness and, consequently, a greater prey capture potential than cribellate orb-webs. These differences appear to have favoured the transition from cribellate to adhesive capture threads and the success of adhesive orb-weavers, which include 95% of all orb-weaving species. Differences in the thread economy and the total stickiness of webs constructed by spiders of different weights also suggest that adhesive orb-weavers should grow more rapidly and be capable of attaining a larger size than cribellate orb-weavers.     

Changes in spinning anatomy and thread stickiness associated with the origin of orb-weaving spiders

The cribellum is an oval spinning field whose spigots produce silk fibrils that form the outer surfaces of the primitive prey capture threads found in aerial spider webs. A comparison of the cribella and cribellar capture threads of 13 species of spiders representing seven families (Amaurobiidae, Desidae, Dictynidae, Filistatidae, Neolanidae, Oecobiidae, and Uloboridae) confirms that the stickness of a cribellar thread is directly related to the number of spigots on a spider's cribellum. This comparison also demonstrates that the origin of orb-weaving spiders from ancestors that constructed less highly organized webs was associated with increases in both the weight-specific number of cribellum spigots and the weight-specific stickiness of cribellar prey capture threads. In contrast to other cribellate spiders, the number of cribellum spigots of orb-weaving species of the family Uloboridae scales to spider mass. Thus, the origin of orb-weaving spiders involved not only behavioural changes that stylized and restricted the placement of cribellar threads, but also included morphological changes that increased the stickiness of these capture threads by endowing them with more cribellar fibrils.     

Adhesive compatibility of cribellar and viscous prey capture threads and its implication for the evolution of orb-weaving spiders

Evolution of orb-weaving spiders that comprise the Orbiculariae clade involved a transition in the composition of prey capture thread that has been challenging to explain. The primitive cribellar threads spun by members of the Deinopoidea subclade resemble the capture threads of their non-orb-web-weaving ancestors and are formed of thousands of fine, dry, protein cribellar fibrils. In contrast, the derived viscous capture threads spun by members of the Araneoidea subclade have regularly spaced, aqueous adhesive droplets. When second instar deinopoid spiderlings emerge from egg sacs they are unable to spin cribellar threads, and, therefore, do not construct orb-webs; whereas second instar araneoids spin capture threads and construct orb-webs. If, as we hypothesize, viscous material evolved to enable second instar spiderlings to construct orb-webs, early araneoids may have spun composite cribellar-viscous capture threads. To examine the functional feasibility of such intermediate capture threads, we compared the adhesion of cribellar threads, viscous threads, and combined cribellar-viscous threads. The stickiness of these combined threads was greater than that of native cribellar or viscous threads alone. The viscous material of Araneus marmoreus threads exhibited a substantial increase in stickiness when combined with cribellar fibrils and that of Argiope aurantia threads a small increase in stickiness when combined with cribellar fibrils. Thus, if early araneoids retained their ability to spin cribellar threads after having evolved glands that produced viscous material, their composite threads could have formed a functional adhesive system that achieved its stickiness at no loss of material economy.     

Factors governing the stickiness of cribellar prey capture threads in the spider family Uloboridae

The surface of a cribellar prey capture thread is formed of thousands of fine, looped fibrils, each issuing from one of the spigots on an oval spinning plate termed the cribellum. This plesiomorphic capture thread is retained by members of the family Uloboridae, in which its stickiness differs among genera. An examination of five cribellar thread features in nine uloborid species shows that only the number of fibrils that form a thread explains these differences in thread stickiness. Neither the physical features of these fibrils, nor the manner in which they are combined to form threads differs among species. Threads produced by orb-weaving species contain fewer fibrils than those produced by species that build reduced webs. Relative to spider weight, the number of fibrils that form a cribellar thread is greatest in simple-web species of the genus Miagrammopes, less in triangle-web species of the genus Hyptiotes, and least in orb-weaving species representing five genera. A transformational analysis shows that change in the number of cribellum spigots is directly related to change in the stickiness of cribellar thread. This direct relationship between the material invested in a cribellar thread and its stickiness may have been a limiting factor that favored the switch from the dry cribellar threads of uloborids to the adhesive capture threads produced by other orb-weaving families. © 1994 Wiley-Liss, Inc.     

Capture thread extensibility of orb-weaving spiders: testing punctuated and associative explanations of character evolution

Spider orb-webs contain sticky prey capture threads and non-sticky support threads. Primitive orb-weavers of the Deinopoidea produce dry cribellar threads made of thousands of silk fibrils that surround supporting axial fibres, whereas the viscous threads of modern Araneoidea orb-weavers produce adhesive threads with an aqueous solution that coalesces as droplets around the axial fibres. We have previously shown that the greater diversity of the Araneoidea is phylogenetically significant and attributed this disparity to a number of advantages, considered key innovations, that adhesive thread has over cribellar thread. An important putative advantage of adhesive thread demonstrated by Kohler and Vollrath in their 1995 study is its greater extensibility, a feature that better adapts it to absorb the kinetic energy of a prey strike. However, this conclusion is based on a two-species comparison that does not take advantage of the modern comparative method that requires hypotheses to be tested in a phylogenetic context. Using a transformational analysis to examine threads produced by nine species, our study finds no support for the punctuated explanation that adhesive thread has a greater extensibility than cribellar thread. Instead, it strongly supports the associative null hypothesis that capture thread extensibility is tuned to spider mass and to architectural features of the web, including its capture area, capture spiral spacing, and capture area per radius.     

Adhesive efficiency of spider prey capture threads

Cribellar capture threads are comprised of thousands of fine silk fibrils that are produced by the spigots of a spider's cribellum spinning plate and are supported by larger interior axial fibers. This study examined factors that constrain the stickiness of cribellar threads spun by members of the orb-weaving family Uloboridae in the Deinopoidea clade and compared the material efficiency of these threads with that of viscous capture threads produced by members of their sister clade, the Araneoidea. An independent contrast analysis confirmed the direct relationship between cribellar spigot number and cribellar thread stickiness. A model based on this relationship showed that cribellar thread stickiness is achieved at a rapidly decreasing material efficiency, as measured in terms of stickiness per spigot. Another limitation of cribellar thread was documented when the threads of two uloborid species were measured with contact plates of four widths. Unlike that of viscous threads, the stickiness of cribellar threads did not increase as plate width increased, indicating that only narrow bands along the edges of thread contact contributed to their stickiness. As thread volume increased, the gross material efficiency of cribellar threads decreased much more rapidly than that of viscous threads. However, cribellar threads achieved their stickiness at a much greater gross material efficiency than did viscous threads, making it more challenging to explain the transition from deinopoid to araneoid orb-webs.     

Evolution of adhesive mechanisms in cribellar spider prey capture thread: evidence for van der Waals and hygroscopic forces

Sticky prey capture threads are produced by many members of the spider infraorder Araneomorphae. Cribellar threads are plesiomorphic for this clade, and viscous threads are apomorphic. The outer surface of cribellar thread is formed of thousands of fine, looped fibrils. Basal araneomorphs produce non-noded cribellar fibrils, whereas more derived members produce noded fibrils. Cribellar fibrils snag and hold rough surfaces, but other forces are required to explain their adherence to smooth surfaces. Threads of Hypochilus pococki (Hypochilidae) formed of non-noded fibrils held to a smooth plastic surface with the same force under low and high humidities. In contrast, threads of Hyptiotes cavatus and Uloborus glomosus (Uloboridae) formed of noded fibrils held with greater force to the same surface at intermediate and high humidities. This supports the hypothesis that van der Waals forces allow non-noded cribellar fibrils to adhere to smooth surfaces, whereas noded fibrils, owing to the hydrophilic properties of their nodes, add hygroscopic forces at intermediate and high humidities. Thus, there appear to have been two major events in the evolution of adhesive mechanisms in spider prey capture thread: the addition of hydrophilic nodes to the fibrils of cribellar threads and the replacement of cribellar fibrils by viscous material and glycoprotein glue.  © 2002 The Linnean Society of London, Biological Journal of the Linnean Society , 2002, 77 , 1–8.     

Extraordinary web and silk properties of Cyrtarachne (Araneae, Araneidae): a possible link between orb-webs and bolas

Cyrtarachne is an orb-weaving spider of the sub-family Cyrtarachninae (Araneidae), which includes the triangle-web-building Pasilobus and the bolas spiders. We found that web and thread characteristics of Cyrtarachne differed greatly from those of typical orb-webs. Web diameter, sticky spiral spacing, breaking strength and stickiness of thread, thread diameter and droplet diameter were significantly different from those of other members of Araneidae. It is especially worth noting that the diameter was approximately four times, and the breaking strength seven to ten times larger in Cyrtarachne viscid threads than in those of other araneids. Kinetic energy-absorbing ability of Cyrtarachne threads was much greater than in that of other species, and close to the amount of kinetic energy generated by flying moths. Viscid material of threads was peculiar because its adhesiveness decreased to zero in a few hours. Moreover, SEM photos revealed them to be covered with thin scales of material, while threads of other araneids were smooth. These two facts suggest that the viscid material of Cyrtarachne threads may be different from those of other orb-weavers. As web-building, hunting behaviour and prey composition of different species of Cyrtarachninae arc quite similar to each other, we hypothesize that these extraordinary web and thread characteristics of Cyrtarachne are shared by the other members of this sub-family. Because these characteristics differ in many ways from those of typical araneid orb-webs, there appears to have been a great leap in evolution between Cyrtarachne and the other Araneidae.     

TESTING ADAPTIVE RADIATION AND KEY INNOVATION HYPOTHESES IN SPIDERS

We combine statistical and phylogenetic approaches to test the hypothesis that adaptive radiation and key innovation have contributed to the diversity of the order Araneae. The number of unbalanced araneid clades (those whose species numbers differ by 90% or more) exceeds the number predicted by a null Markovian model. The current phylogeny of spider families contains 74 bifurcating nodes, of which 31 are unbalanced. As this is significantly more than the 14.8 expected unbalanced nodes, some of the diversity within the Araneae can be attributed to some deterministic cause (e.g., adaptive radiation). One of the more highly unbalanced (97%) bifurcations divides the orb-weaving spiders into the Deinopoidea and the larger Araneoidea. A simple statistical model shows that the inequality in diversity between the Deinopoidea and the Araneoidea is significant, and that it is associated with the replacement of primitive cribellar capture thread by viscous adhesive thread and a change from a horizontal to a vertical orb-web orientation. These changes improve an orb-web's ability to intercept and retain prey and expand the adaptive zone that orb-weaving spiders can occupy and are, therefore, considered to be “key innovations.”     

Differences in venom composition between orb-weaving and wandering Hawaiian Tetragnatha (Araneae)

Spider venoms are complex mixtures of toxins that are used primarily for immobilizing prey. There is evidence of chemical variation in spider venoms among close relatives, yet few studies have analysed their evolution within an ecological and phylogenetic framework. On the Hawaiian archipelago, Tetragnatha, a cosmopolitan orb-weaving genus, has undergone a radiation in which a monophyletic lineage has abandoned web-building and become obligately wandering foragers. This study compares venom composition and details of feeding behaviour between orb-weaving and wandering Hawaiian Tetragnatha. Protein gel electrophoresis patterns indicated that relative to orb-weavers, wandering species had a reduced concentration of low molecular weight (<14kDa) components. Both orb-weaving and wandering Tetragnatha captured flying prey (adult lepidopterans, dipterans), but wandering spiders also captured non-flying prey (insect larvae, spiders). There were no distinct differences between orb-weavers and wanderers in prey capture and immobilization sequences, or in the paralytic effects of bites on prey. However, prey bitten by wanderers took longer to be permanently immobilized than prey bitten by orb-weavers. Contrary to predictions, there was no indication that web-loss in this group was associated with an increase in venom potency.     

Spiders spinning electrically charged nano-fibres

Most spider threads are on the micrometre and sub-micrometre scale. Yet, there are some spiders that spin true nano-scale fibres such as the cribellate orb spider, Uloborus plumipes. Here, we analyse the highly specialized capture silk-spinning system of this spider and compare it with the silk extrusion systems of the more standard spider dragline threads. The cribellar silk extrusion system consists of tiny, morphologically basic glands each terminating through exceptionally long and narrow ducts in uniquely shaped silk outlets. Depending on spider size, hundreds to thousands of these outlet spigots cover the cribellum, a phylogenetically ancient spinning plate. We present details on the unique functional design of the cribellate gland–duct–spigot system and discuss design requirements for its specialist fibrils. The spinning of fibres on the nano-scale seems to have been facilitated by the evolution of a highly specialist way of direct spinning, which differs from the aqua-melt silk extrusion set-up more typical for other spiders.     

The effects of capture spiral composition and orb-web orientation on prey interception

Cribellar prey capture threads found in primitive, horizontal orb-webs reflect more light, including ultraviolet wavelengths, than viscous threads found in more derived, vertical orb-webs. Low web visibility and vertical orientation are each thought to increase prey interception and may represent key innovations that contributed to the greater diversity of modern, araneoid orb-weaving spiders. This study compares prey interception rates of cribellate orb-webs constructed by Uloborus glomosus (Uloboridae) with viscous orb-webs constructed by Leucauge venusta (Tetragnathidae) and Micrathena gracilis (Araneidae). We placed sectors of cribellar and viscous threads side by side in frames that were oriented either horizontally or vertically. The webs of both U. glomosus and L. venusta intercepted more prey when vertically oriented. In each orientation L. venusta webs intercepted more insects than did U. glomosus. Although this is consistent with the greater visibility of cribellar threads, the more closely spaced capture spirals of L. venusta may have contributed to this difference. Micrathena gracilis webs intercepted more prey than did U. glomosus webs, although web orientation did not affect the performance of this araneoid species. The stickier and more closely spaced capture spirals of M. gracilis may have enhanced the interception rates of this species and accounted for the greater number of smaller dipterans retained in its webs. The tendency for these slow, weak flight insects to be blown into both horizontal and vertical webs may account for similar interception rates of horizontal and vertical M. gracilis webs. These observations support the enhanced prey interception of vertically oriented orb-webs, but offer only qualified support for the contributions of lower visibility viscous capture threads.     

Biomechanical variation of silk links spinning plasticity to spider web function

Spider silk is renowned for its high tensile strength, extensibility and toughness. However, the variability of these material properties has largely been ignored, especially at the intra-specific level. Yet, this variation could help us understand the function of spider webs. It may also point to the mechanisms used by spiders to control their silk production, which could be exploited to expand the potential range of applications for silk. In this study, we focus on variation of silk properties within different regions of cobwebs spun by the common house spider, Achaearanea tepidariorum. The cobweb is composed of supporting threads that function to maintain the web shape and hold spiders and prey, and of sticky gumfooted threads that adhere to insects during prey capture. Overall, structural properties, especially thread diameter, are more variable than intrinsic material properties, which may reflect past directional selection on certain silk performance. Supporting threads are thicker and able to bear higher loads, both before deforming permanently and before breaking, compared with sticky gumfooted threads. This may facilitate the function of supporting threads through sustained periods of time. In contrast, sticky gumfooted threads are more elastic, which may reduce the forces that prey apply to webs and allow them to contact multiple sticky capture threads. Therefore, our study suggests that spiders actively modify silk material properties during spinning in ways that enhance web function.     

Spider capture silk: performance implications of variation in an exceptional biomaterial

Spiders and their silk are an excellent system for connecting the properties of biological materials to organismal ecology. Orb-weaving spiders spin sticky capture threads that are moderately strong but exceptionally extensible, resulting in fibers that can absorb remarkable amounts of energy. These tough fibers are thought to be adapted for arresting flying insects. Using tensile testing, we ask whether patterns can be discerned in the evolution of silk material properties and the ecological uses of spider capture fibers. Here, we present a large comparative data set that allows examination of capture silk properties across orb-weaving spider species. We find that material properties vary greatly across species. Notably, extensibility, strength, and toughness all vary approximately sixfold across species. These material differences, along with variation in fiber size, dictate that the mechanical performance of capture threads, the energy and force required to break fibers, varies by more than an order of magnitude across species. Furthermore, some material and mechanical properties are evolutionarily correlated. For example, species that spin small diameter fibers tend to have tougher silk, suggesting compensation to maintain breaking energy. There is also a negative correlation between strength and extensibility across species, indicating a potential evolutionary trade-off. The different properties of these capture silks should lead to differences in the performance of orb webs during prey capture and help to define feeding niches in spiders.     

The common house spider alters the material and mechanical properties of cobweb silk in response to different prey

Many spiders depend upon webs to capture prey. Web function results from architecture and mechanical performance of the silk. We hypothesized that the common house spider, Achaearanea tepidariorum, would alter the mechanical performance of its cobweb in response to different prey by varying the structural and material properties of its silk. We fed spiders either large, high kinetic energy crickets or small, low kinetic energy pillbugs for 1 week and then examined their freshly spun silk. We separated mechanical performance into structural and material effects. We measured both types of properties for silk threads collected directly from cobwebs to test for "tuning" of silk performance to different aspects of prey capture. We compared silk from two different functional regions of the cobweb-sticky gumfooted threads that adhere directly to prey and supporting threads that maintain web integrity. Supporting threads from cricket-fed spiders were stiffer and tougher than supporting threads from pillbug-fed spiders. Both types of silk from cricket-fed spiders broke at higher loads than silk from pillbug-fed spiders. We explain this variation using a simple model of forces exerted by prey and spiders on single threads and propose potential mechanisms for this change in material properties. Two alternative, nonexclusive, hypotheses are suggested by our data. Spiders may tune silk to different types of prey by spinning threads that are able to hold prey without deforming permanently. Alternatively, as spider's body mass differed dramatically between the two feeding regimes, spiders may tune silk to their own body mass.     

Persistent stickiness of viscous capture threads produced by araneoid orb-weaving spiders

The most commonly encountered spider orb-webs rely on sticky, viscous capture threads to retain prey. These threads are composed of supporting fibers covered by a complex aqueous solution that forms a series of droplets, each with a glycoprotein granule that confers adhesion. This adhesive system normally functions for less than a day before being replaced. Despite their ephemeral nature, we found that the stickiness of viscous threads persists for much longer. When measured over the course of 7 days, small decreases in the adhesion of Larinioides cornutus threads were not statistically significant. Threads of Araneus marmoreus, Argiope trifasciata, and Metepeira labyrinthea were aged for 8-10 months and remeasured under environmental conditions similar to those under which initial measurements were made. When returned to humidity similar to that under which measurements were initially made, neither the droplet volumes nor the stickiness of aged threads differed significantly from those of newly spun threads. These observations indicate that when viscous threads are protected from contamination, the compounds responsible for their hydrophilic and adhesive properties do not degrade easily.     

Damping capacity is evolutionarily conserved in the radial silk of orb-weaving spiders

Orb-weaving spiders depend upon their two-dimensional silk traps to stop insects in mid flight. While the silks used to construct orb webs must be extremely tough to absorb the tremendous kinetic energy of insect prey, webs must also minimize the return of that energy to prey to prevent insects from bouncing out of oscillating webs. We therefore predict that the damping capacity of major ampullate spider silk, which forms the supporting frames and radial threads of orb webs, should be evolutionarily conserved among orb-weaving spiders. We test this prediction by comparing silk from six diverse species of orb spiders. Silk was taken directly from the radii of orb webs and a Nano Bionix test system was used either to sequentially extend the silk to 25% strain in 5% increments while relaxing it fully between each cycle, or to pull virgin silk samples to 15% strain. Damping capacity was then calculated as the percent difference in loading and unloading energies. Damping capacity increased after yield for all species and typically ranged from 40 to 50% within each cycle for sequentially pulled silk and from 50 to 70% for virgin samples. Lower damping at smaller strains may allow orb webs to withstand minor perturbations from wind and small prey while still retaining the ability to capture large insects. The similarity in damping capacity of silk from the radii spun by diverse spiders highlights the importance of energy absorption by silk for orb-weaving spiders.     

Behavioural and biomaterial coevolution in spider orb webs

Mechanical performance of biological structures, such as tendons, byssal threads, muscles, and spider webs, is determined by a complex interplay between material quality (intrinsic material properties, larger scale morphology) and proximate behaviour. Spider orb webs are a system in which fibrous biomaterials—silks—are arranged in a complex design resulting from stereotypical behavioural patterns, to produce effective energy absorbing traps for flying prey. Orb webs show an impressive range of designs, some effective at capturing tiny insects such as midges, others that can occasionally stop even small birds. Here, we test whether material quality and behaviour (web design) co‐evolve to fine‐tune web function. We quantify the intrinsic material properties of the sticky capture silk and radial support threads, as well as their architectural arrangement in webs, across diverse species of orb‐weaving spiders to estimate the maximum potential performance of orb webs as energy absorbing traps. We find a dominant pattern of material and behavioural coevolution where evolutionary shifts to larger body sizes, a common result of fecundity selection in spiders, is repeatedly accompanied by improved web performance because of changes in both silk material and web spinning behaviours. Large spiders produce silk with improved material properties, and also use more silk, to make webs with superior stopping potential. After controlling for spider size, spiders spinning higher quality silk used it more sparsely in webs. This implies that improvements in silk quality enable ‘sparser’ architectural designs, or alternatively that spiders spinning lower quality silk compensate architecturally for the inferior material quality of their silk. In summary, spider silk material properties are fine‐tuned to the architectures of webs across millions of years of diversification, a coevolutionary pattern not yet clearly demonstrated for other important biomaterials such as tendon, mollusc byssal threads, and keratin.     

A novel property of spider silk: chemical defence against ants

Spider webs are made of silk, the properties of which ensure remarkable efficiency at capturing prey. However, remaining on, or near, the web exposes the resident spiders to many potential predators, such as ants. Surprisingly, ants are rarely reported foraging on the webs of orb-weaving spiders, despite the formidable capacity of ants to subdue prey and repel enemies, the diversity and abundance of orb-web spiders, and the nutritional value of the web and resident spider. We explain this paradox by reporting a novel property of the silk produced by the orb-web spider Nephila antipodiana (Walckenaer). These spiders deposit on the silk a pyrrolidine alkaloid (2-pyrrolidinone) that provides protection from ant invasion. Furthermore, the ontogenetic change in the production of 2-pyrrolidinone suggests that this compound represents an adaptive response to the threat of natural enemies, rather than a simple by-product of silk synthesis: while 2-pyrrolidinone occurs on the silk threads produced by adult and large juvenile spiders, it is absent on threads produced by small juvenile spiders, whose threads are sufficiently thin to be inaccessible to ants.     

Web tuning of an orb-web spider, Octonoba sybotides, regulates prey-catching behaviour

An uloborid spider (Oclonoba sybotides constructs two types of web which are distinguished by linear or spiral stabilimenta. Food-deprived spiders tend to construct webs with spiral stabilimenta and food-satiated spiders tend to construct webs with linear stabilimenta. I experimentally examined the influence of web type on the speed of a spider's response to small and large flies. The results indicated that web type rather than the spiders' energetic condition influences the response speed to small or large Drosophila flies. I also examined whether thread tension affects the response speed of spiders by increasing the tension of the radial threads. The results showed that spiders on an expanded web responded to small prey as quickly as spiders on webs with spiral stabilimenta. The tension of the radial threads may be regulated by the degree of distortion of the radial threads at the hub. O. sybotides seems to construct orb webs which induce different responses for smaller, less-profitable prey according to its energetic state. The spider appears to increase the tension of the radial threads so that it can sense smaller prey better when hungry.