Enhanced biological denitrification of high concentration of nitrite with supplementary carbon source

Nitrite accumulates during biological denitrification processes when carbon sources are insufficient. Acetate, methanol, and ethanol were investigated as supplementary carbon sources in the nitrite denitrification process using biogranules. Without supplementary external electron donors (control), the biogranules degraded 200 mg l^?1 nitrite at a rate of 0.27 mg NO₂–N g^?1?VSS h^?1. Notably, 1,500 mg l^?1 acetate and 700 mg l^?1 methanol or ethanol enhanced denitrification rates for 200 mg l^?1 nitrite at 2.07, 1.20, and 1.60 mg NO₂–N g^?1?VSS h^?1, respectively; these rates were significantly higher than that of the control. The sodium dodecyl sulfate polyacrylamide gel electrophoresis of the nitrite reductase (NiR) enzyme identified three prominent bands with molecular weights of 37–41 kDa. A linear correlation existed between incremental denitrification rates and incremental activity of the NiR enzyme. The NiR enzyme activity was enhanced by the supplementary carbon sources, thereby increasing the nitrite denitrification rate. The capacity of supplementary carbon source on enhancing NiR enzyme activity follows: methanol?>?acetate?>?ethanol on molar basis or acetate?>?ethanol?>?methanol on an added weight basis.     

Evaluation of the biodegradation potential of 1,4-dioxane in river, soil and activated sludge samples

To evaluate the biodegradation potential of 1,4-dioxane in natural environments, a total of 20 environmental samples including river water, activated sludge, soil from the drainage area of a chemical factory and garden soil were subjected to a 1,4-dioxane degradation test. The five soil samples from the drainage area of the chemical factory were capable of reducing 100 mg l^?1 of 1,4-dioxane to below the detection limit (0.8 mg l^?1) within 33 days. In one activated sludge sample, 100 mg l^?1 of 1,4-dioxane decreased by 69% within 14 days via cometabolic degradation in the presence of 100 mg l^?1 of tetrahydrofuran (THF). The ability of all samples to degrade 1,4-dioxane degradation with or without THF increased after repeated enrichment, except for one soil sample from the drainage area of the chemical factory that was no longer able to degrade 1,4-dioxane after the third cycle of enrichment. However, most of the samples (14/20) were not able to degrade 1,4-dioxane degradation. Thus, it can be concluded that the potential for 1,4-dioxane degradation is not ubiquitously distributed in natural environment.     

Laboratory-scale biofiltration of acrylonitrile by <Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> DAP 96622 in a trickling bed bioreactor

Acrylonitrile (ACN), a volatile component of the waste generated during the production of acrylamide, also is often associated with aromatic contaminants such as toluene and styrene. Biofiltration, considered an effective technique for the treatment of volatile hydrocarbons, has not been used to treat volatile nitriles. An experimental laboratory-scale trickling bed bioreactor using cells of Rhodococcus rhodochrous DAP 96622 supported on granular activated carbon (GAC) was developed and evaluated to assess the ability of biofiltration to treat ACN. In addition to following the course of treatability of ACN, kinetics of ACN biodegradation during both recycle batch and open modes of operation by immobilized and free cells were evaluated. For fed-batch mode bioreactor with immobilized cells, almost complete ACN removal (>95%) was achieved at a flow rate of 0.1 μl/min ACN and 0.8 μl/min toluene (TOL) (for comparative purposes this is equivalent to 6.9 mg l^?1 h^?1 ACN and 83.52 mg l^?1 h^?1 TOL). In a single-pass mode bioreactor with immobilized cells, at ACN inlet loads of 100–200 mg l^?1 h^?1 and TOL inlet load of ~400 mg l^?1 h^?1, with empty bed retention time (EBRT) of 8 min, ACN removal efficiency was ~90%. The three-dimensional structure and characteristics of the biofilm were investigated using confocal scanning laser microscopy (CSLM). CLSM images revealed a robust and heterogeneous biofilm, with microcolonies interspersed with voids and channels. Analysis of the precise measurement of biofilm characteristics using COMSTAT^® agreed with the assumption that both biomass and biofilm thickness increased along the carbon column depth.     

Optimizing micropropagation of drought resistant <Emphasis Type="Italic">Pyrus boissieriana</Emphasis> Buhse

The present study concentrated on introducing a micropropagation protocol for a drought resistant genotype from Pyrus boissieriana, which is the second most naturally widespread pear species in Iran with proper physiological and medicinal properties. Proliferating microshoot cultures were obtained by placing nodal segments on MS medium supplemented with BAP and IBA or NAA. The highest number of shoots (27 shoots per explant) were obtained with 1.5 mg l^?1 BAP and 0.05 mg l^?1 IBA, but this combination did not produce shoots of desirable length (>1.7 cm). Combination of 1.75 mg l^?1 BAP and 0.07 mg l^?1 IBA was the best for the shoot multiplication in P. boissieriana with a sufficient number of shoot production (22.33 shoots per explant) and relatively more appropriate shoot length. The larger and greenish leaves were obtained when PG was added to the best multiplication treatment. Microshoot elongation was carried out in 1/2 and 1/4 MS medium containing 50–100 mg l^?1 PG with different concentrations of IBA or NAA at intervals of 30–60 days. Significant increase in shoot length was detected after 45–60 days of culture in the presence of PG. The highest shoot length (8 cm) was recorded on 1/2 MS medium supplemented with 0.5 mg l^?1 IBA and 100 mg l^?1 PG. GA₃ negatively affected number and length of shoots and generally caused generation of red leaves. The highest percentage of root induction (100%) and root length (9 cm) were obtained on 1/6 strength MS medium supplemented with 0.005 mg l^?1 IBA. All plantlets were hardened when transferred to ex vitro conditions through a period of 25–30 days. The results suggest axillary shoot proliferation of P. boissieriana could successfully be employed for propagation of candidate drought resistant seedling.     

Does radial oxygen loss and iron plaque formation on roots alter Cd and Pb uptake and distribution in rice plant tissues?

Background and Aims

Metal (e.g. Cd and Pb) pollution in agricultural soils and crops have aroused considerable attention in recent years. This study aimed to evaluate the effects of ROL and Fe plaque on Cd and Pb accumulation and distribution in the rice plant.

Methods

A rhizobag experiment was employed to investigate the correlations among radial oxygen loss (ROL), Fe plaque formation and uptake and distribution of Cd and Pb in 25 rice cultivars.

Results

Large differences between the cultivars were found in rates of ROL (1.55 to 6.88 mmol O₂ kg^?1 root d.w. h^?1), Fe plaque formation (Fe: 6,117–48,167 mg kg^?1; Mn: 127–1,089 mg kg^?1), heavy metals in shoot (Cd: 0.13–0.35 mg kg^?1; Pb: 4.8–8.1 mg kg^?1) and root tissues (Cd: 1.1–3.5 mg kg^?1; Pb: 45–199 mg kg^?1), and in Fe plaque (Cd: 0.54–2.6 mg kg^?1; Pb: 102–708 mg kg^?1). Rates of ROL were positively correlated with Fe plaque formation and metal deposition on root surfaces, but negatively correlated with metal transfer factors of root/plaque and distributions in shoot and root tissues.

Conclusions

ROL-induced Fe plaque promotes metal deposition on to root surfaces, leading to a limitation of Cd and Pb transfer and distribution in rice plant tissues.     

Kinetics study of pyridine biodegradation by a novel bacterial strain,Rhizobium sp. NJUST18

Biodegradation of pyridine by a novel bacterial strain, Rhizobium sp. NJUST18, was studied in batch experiments over a wide concentration range (from 100 to 1,000 mg l^?1). Pyridine inhibited both growth of Rhizobium sp. NJUST18 and biodegradation of pyridine. The Haldane model could be fitted to the growth kinetics data well with the kinetic constants μ* = 0.1473 h^?1, K _s = 793.97 mg l^?1, K _i = 268.60 mg l^?1 and S _m = 461.80 mg l^?1. The true μ _max, calculated from μ*, was found to be 0.0332 h^?1. Yield coefficient Y _X/S depended on S _i and reached a maximum of 0.51 g g^?1 at S _i of 600 mg l^?1. V _max was calculated by fitting the pyridine consumption data with the Gompertz model. V _max increased with initial pyridine concentration up to 14.809 mg l^?1 h^?1. The q _S values, calculated from $V_{ \hbox{max} }$ , were fitted with the Haldane equation, yielding q _Smax = 0.1212 g g^?1 h^?1 and q* = 0.3874 g g^?1 h^?1 at S _m′ = 507.83 mg l^?1, K _s′ = 558.03 mg l^?1, and K _i′ = 462.15 mg l^?1. Inhibition constants for growth and degradation rate value were in the same range. Compared with other pyridine degraders, μ _max and S _m obtained for Rhizobium sp. NJUST18 were relatively high. High K _i and K _i′ values and extremely high K _s and K _s′ values indicated that NJUST18 was able to grow on pyridine within a wide concentration range, especially at relatively high concentrations.     

Production of aglycone protopanaxatriol from ginseng root extract using Dictyoglomus turgidum β-glycosidase that specifically hydrolyzes the xylose at the C-6 position and the glucose in protopanaxatriol-type ginsenosides

The hydrolytic activity of a recombinant β-glycosidase from Dictyoglomus turgidum that specifically hydrolyzed the xylose at the C-6 position and the glucose in protopanaxatriol (PPT)-type ginsenosides followed the order Rf > Rg₁ > Re > R₁ > Rh₁ > R₂. The production of aglycone protopanaxatriol (APPT) from ginsenoside Rf was optimal at pH 6.0, 80 °C, 1 mg ml^?1 Rf, and 10.6 U ml^?1 enzyme. Under these conditions, D. turgidum β-glycosidase converted ginsenoside R₁ to APPT with a molar conversion yield of 75.6 % and a productivity of 15 mg l^?1 h^?1 after 24 h by the transformation pathway of R₁ → R₂ → Rh₁ → APPT, whereas the complete conversion of ginsenosides Rf and Rg₁ to APPT was achieved with a productivity of 1,515 mg l^?1 h^?1 after 6.6 h by the pathways of Rf → Rh₁ → APPT and Rg₁ → Rh₁ → APPT, respectively. In addition, D. turgidum β-glycosidase produced 0.54 mg ml^?1 APPT from 2.29 mg ml^?1 PPT-type ginsenosides of Panax ginseng root extract after 24 h, with a molar conversion yield of 43.2 % and a productivity of 23 mg l^?1 h^?1, and 0.62 mg ml^?1 APPT from 1.35 mg ml^?1 PPT-type ginsenosides of Panax notoginseng root extract after 20 h, with a molar conversion yield of 81.2 % and a productivity of 31 mg l^?1 h^?1. This is the first report on the APPT production from ginseng root extract. Moreover, the concentrations, yields, and productivities of APPT achieved in the present study are the highest reported to date.     

The operating performance of a biotrickling filter with Lysinibacillus fusiformis for the removal of high-loading gaseous chlorobenzene

Removal of gaseous chlorobenzene (CB) by a biotrickling filter (BTF) filled with modified ceramics and multi-surface hollow balls during gas–liquid mass transfer at the steady state was by microbial degradation rather than dissolution in the spray liquid or emission into the atmosphere. The BTF was flexible and resistant to the acid environment of the spray liquid, with the caveat that the spray liquid should be replaced once every 6–7 days. The BTF, loaded with Lysinibacillus fusiformis, performed well for purification of high-loading CB gas. The maximum CB gas inlet loading rate, 103 g m^?3 h^?1, CB elimination capacity, 97 g m^?3 h^?1, and CB removal efficiency, 97.7 %, were reached at a spray liquid flow rate of 27.6 ml min^?1, an initial CB concentration of up to 1,300 mg m^?3, and an empty bed retention time of more than 45 s.     

Somatic embryogenesis from mature zygotic embryos of Distylium chinense (Fr.) Diels and assessment of genetic fidelity of regenerated plants by SRAP markers

The objective was to establish an efficient regeneration protocol for Distylium chinense based on somatic embryogenesis and evaluate the genetic stability of plants regenerated in vitro. To induce callus mature zygotic embryos were cultured on Murashige and Skoog’s (MS) medium that was supplemented with different concentrations of 2,4-dichlorophenoxyacetic acid (2,4-D) and N⁶-benzyladenine (BA). After 20 days, the highest rate of callus formation (88.9 %) occurred on MS medium supplemented with 0.5 mg l^?1 2,4-D and 0.1 mg l^?1 BA. It was observed that light-yellow, compact, dry, nodular embryogenic calli had formed. These calli were then subcultured on fresh MS medium supplemented with 0.1 mg l^?1 BA and 0.5 mg l^?1 α-naphthaleneacetic acid (NAA) for proliferation for an additional 30 days. To induce somatic embryos and plant regeneration, the embryogenic callus was transferred to fresh MS medium that was supplemented with different concentrations of BA and NAA. After 30 days, 0.5 mg l^?1 BA in combination with 0.5 mg l^?1 NAA produced the best result in terms of somatic embryogenesis (%), shoot differentiation (%), number of shoots per callus and shoot length. Next, the plantlets were transferred to the field for 5 weeks and a 95 % survival rate was observed. The sequence-related amplified polymorphism markers confirmed genetic stability of plants regenerated in vitro. To our knowledge, this is the first report that describes a plant regeneration protocol for D. chinense via somatic embryogenesis to be used for germplasm conservation and commercial cultivation.     

Establishment of long-term proliferating shoot cultures of elite <Emphasis Type="Italic">Jatropha curcas</Emphasis> L. by controlling endophytic bacterial contamination

Leaf explants of the second or third node were collected from field-grown elite Jatropha curcas trees and incubated in Murashige and Skoog’s (Physiol Plant 15:473–497, 1962) medium supplemented with growth regulators. Direct shoot organogenesis was induced when explants were incubated in a medium containing 0.5 mg l^?1 benzyladenine (BA) and 0.1 mg l^?1 indolebutyric acid (IBA). A maximum of seven shoot buds differentiated within 6 weeks of culture incubation. Indirect shoot organogenesis was obtained when explants were incubated in the medium supplemented with 0.5 mg l^?1 BA along with 1.0 mg l^?1 each of 2,4-dichlorophenoxyacetic acid (2,4-D) and indoleacetic acid (IAA). A pulse treatment of 0.5 mg l^?1 thidiazurone (TDZ) and 0.1 mg l^?1 IBA for 5 days was necessary for shoot organogenesis in green compact callus before subculture into 0.5 mg l^?1 BA and 0.1 mg l^?1 IBA containing medium. Leaf explants of J. curcas, collected from the field, contained endophytic bacterial contamination, which expressed itself after 2–3 subcultures. These bacteria were cultured and identified as Enterobacter ludwigii. After staining, these were found as gram-negative bacteria. Their sensitivity against different antibiotics has been tested by culturing them with different antibiotic stabs for 72 h. Finally, Augmentin® was found as the most effective and suitable antibiotic which not only controlled the bacteria within 2–3 subcultures but also supported the regeneration system and growth of the regenerated shoots and such cultures have been grown for a long-term of over 2 years without any contamination.     

Evaluation of indigenous microalgal isolate Chlorella sp. FC2 IITG as a cell factory for biodiesel production and scale up in outdoor conditions

The present study reports evaluation of an indigenous microalgal isolate Chlorella sp. FC2 IITG as a potential candidate for biodiesel production. Characterization of the strain was performed under photoautotrophic, heterotrophic, and mixotrophic cultivation conditions. Further, an open-pond cultivation of the strain under outdoor conditions was demonstrated to evaluate growth performance and lipid productivity under fluctuating environmental parameters and in the presence of potential contaminants. The key findings were: (1) the difference in cultivation conditions resulted in significant variation in the biomass productivity (73–114 mg l^?1 day^?1) and total lipid productivity (35.02–50.42 mg l^?1 day^?1) of the strain; (2) nitrate and phosphate starvation were found to be the triggers for lipid accumulation in the cell mass; (3) open-pond cultivation of the strain under outdoor conditions resulted in biomass productivity of 44 mg l^?1 day^?1 and total lipid productivity of 10.7 mg l^?1 day^?1; (4) a maximum detectable bacterial contamination of 7 % of the total number of cells was recorded in an open-pond system; and (5) fatty acid profiling revealed abundance of palmitic acid (C16:0), oleic acid (C18:1) and linoleic acid (C18:2), which are considered to be the key elements for suitable quality biodiesel.     

Enhanced production of hairy root metabolites using microbubble generator

Previously, increased partitioning of the natural product nicotine from tobacco hairy roots into the culture media was achieved by altering the expression of the nicotine uptake permease gene. The present study demonstrated that further increases in nicotine yield in the media were attained by using surfactant-stabilized microbubbles. Compared to other non-ionic surfactants (Tween 20 and Tween 80) and the ionic surfactant SDS, Triton X-100 (TX100) both increased total nicotine production and exudation into the hairy root culture media. In comparison to surfactant-free medium, TX100 at 10, 25, and 50 mg l^?1 did not show strong inhibition of hairy root growth. At 4,000 rpm shear speed, microbubbles stabilized by 10, 25, and 50 mg l^?1 TX100 had k _L a of 22.3, 36.2, and 44.1 h^?1 in Gamborg’s B5 medium, respectively, in comparison to 16.4 h^?1 with conventional air sparging. In a 1-l bioreactor, microbubbles stabilized by TX100 were applied to hairy roots after the inoculated root tips were self-immobilized by branching. With microbubble dispersion, dissolved oxygen rapidly increased from 60 to 85 %, and hairy root growth rate increased. Nicotine accumulation in culture medium with microbubbles reached 146 mg l^?1 after 30 days cultivation. These results show that combining genetic modification with surfactant-stabilized microbubble dispersion can substantially increase levels of nicotine in the media of hairy root cultures.     

Hygromycin promotes somatic embryogenesis in spinach

Hygromycin (hyg) at low doses (0.5–1.0 mg l^?1) promoted somatic embryogenesis from apical sections of spinach lateral roots. The highest promoting effect on both the frequency of regeneration and the mean number of somatic embryos (SE) per explant was achieved at 0.5 mg l^?1 hyg. With increasing the concentration of hyg to 1 mg l^?1, the regeneration frequency decreased, while the mean SE number remained significantly higher than in control (hyg-free medium). Complete inhibition of SE regeneration started at 7.5 mg l^?1 hyg. Moreover, hyg efficiently promoted the process of secondary somatic embryogenesis. Compared to control, a 2.75-fold increase in the secondary somatic embryo (SSE) mean number was obtained at 0.5 mg l^?1 hyg, and the increment was still discernible at 1.0 and 2.5 mg l^?1 hyg. Both primary SE and SSE explants became completely necrotic at 12.5 mg l^?1 hyg. Since attempts with direct selection at 20 mg l^?1 hyg proved unsuccessful, the results obtained in this study suggest that a stepwise selection procedure is suitable, starting with selection at 0.5 mg l^?1 hyg, to exploit the promoting effect of low hyg doses on SE regeneration from transformed cells, then gradually increasing the hyg concentration to 20 mg l^?1 for final selection. Complete SE and SSE explant mortality at hyg above 12.5 mg l^?1 guarantees a low possibility of escape during the selection process. This study will be useful for increasing the efficiency of transgenic plant regeneration following genetic transformation in spinach.     

Comparison of startup and anaerobic wastewater treatment in UASB, hybrid and baffled reactor

An experimental study was carried out to compare the performance of selected anaerobic high rate reactors operated simultaneously at 37?°C. The three reactors, namely upflow anaerobic sludge bed reactor (UASB), hybrid of UASB reactor and anaerobic filter (anaerobic hybrid reactor – AHR) and anaerobic baffled reactor (ABR), were inoculated with the anaerobic digested sludge from municipal wastewater treatment plant and tested with synthetic wastewater. This wastewater contained sodium acetate and glucose with balanced nutrients and trace elements (COD 6000?mg?·?l^?1). Organic loading rate (B _v ) was increased gradually from an initial 0.5?kg?·?m^?3?·?d^?1 to 15?kg?·?m^?3?·?d^?1 in all the reactors. From the comparison of the reactors' performance, the lowest biomass wash-out resulted from ABR. In the UASB, significant biomass wash-out was observed at the B _v 6?kg?·?m^?3?·?d^?1, and in the AHR at the B _v 12?kg?·?m^?3?·?d^?1. The demand of sodium bicarbonate for pH maintenance in ABR was two times higher as for UASB and AHR. The efficiency of COD removal was comparable for all three reactors – 80–90%. A faster biomass granulation was observed in the ABR than in the other two reactors. This fact is explained by the kinetic selection of filamentous bacteria of the Methanotrix sp. under a high (over 1.5?g?·?l^?1) acetate concentration.     

Agrobacterium-mediated transformation of Eruca sativa

An Agrobacterium tumefaciens—mediated transformation system was developed for Eruca sativa (eruca). Hypocotyl explants were co-cultivated with bacterial cells carrying a plasmid harboring a uidA:nptII fusion gene along a phosphinothricin acetyl transferase (PAT) gene cassette, for a period of 2 days. These were grown on a high cytokinin/auxin medium containing 5.0 mg l^?1 6-benzyladenine (BA), 1.0 mg l^?1 indole-3-acetic acid (IAA), and 0.1 mg l^?1 α-naphthaleneacetic acid (NAA). Explants were then transferred to a lower cytokinin/auxin medium containing 2.0 mg l^?1 BA and 0.1 mg l^?1 NAA along with 5.0 mg l^?1 silver nitrate and 300 mg l^?1 Timentin®. Upon transfer to a selection medium containing either 20 mg l^?1 kanamycin or 2 mg l^?1 L-phosphinothricin (L-ppt), shoot regenerants were observed. Expression of the transgenes in putative transformants was confirmed using a histochemical GUS assay. Presence of the PAT transgene in GUS-positive T0 plants was confirmed by Southern blot analysis. Moreover, spot tests of T1 seedlings were conducted using the L-ppt herbicide. A transformation frequency of 1.1% was obtained with more than 60% of transgenic lines containing single copies of the transgenes.     

Plant regeneration from protoplasts in Indian local Coriandrum sativum L.: scanning electron microscopy and histological evidences for somatic embryogenesis

Coriandrum sativum L. is an annual herb belonging to the family Umbelliferae. It is used as a spice plant in Indian subcontinent and it has several medicinal applications as well. In this present article, an efficient plant regeneration protocol from protoplasts via somatic embryogenesis was established and is reported. This is the first ever protoplast isolation study in Indian local coriander in which plant regeneration was achieved. Hypocotyl-derived embryogenic callus was used as a source of protoplast. The embryogenic callus suspension was prepared by transferring tissues onto rotary-agitated liquid Murashige and Skoog, added with 1.0 mg l^?1 2,4-Dichlorophenoxyacetic acid (2,4-D) and 1.0 mg l^?1 KIN (6-furfurylaminopurine). The suspension was digested with enzymatic solutions and a combination of cellulase (2.0 %), pectinase (1.0 %), macerozyme (0.02 %) and driselase (0.50 %) induced maximum yield of protoplasts (34.25 × 10⁵). In 1.0 mg l^?1 2,4-D + 1.0 mg l^?1 KIN containing medium, protoplasts divided well and formed maximum number of microcolonies (14.30/test tube). The protoplast callus (PC) biomass grew well in solid medium. The protoplast embryogenic callus was rich in protein, proline and sugar compared to non-embryogenic PC. The protoplast originated callus later differentiated into somatic embryos. The somatic embryo morphology, scanning electron microscopy and histology of embryo origin and development were investigated and discussed in details in this present communication. In 1.0 mg l^?1 2,4-D + 0.5 mg l^?1 BA (6-Benzyladenine), maximum number of embryos were formed on microcallus (26.6/callus mass). The embryo matured and germinated into plantlets at a low to moderate rate, highest (31.3 %) embryo germination was observed in 1.0 mg l^?1 BA + 0.5 mg l^?1 α-Naphthalene acetic acid added medium. The entire process of regeneration took about 4–5 months’ time for recovering plantlets from protoplasts.     

Plant regeneration via callus culture and subsequent in vitro flowering of Dendrobium huoshanense

A protocol for regenerating and subsequent in vitro flowering of an economical important and endangered medicinal orchid, Dendrobium huoshanense, was established mainly via indirect protocorm-like body (PLB) formation. A four-step method was developed to induce successful plant regeneration on 1/2 MS medium supplemented with suitable plant growth regulators (PGRs). Step 1 (callus induction): the root tip explants (1 cm long) were cultured at 1 mg l^?1 2,4-D + 1 mg l^?1 TDZ for 3 months. Step 2 (callus proliferation): the calli were subcultured with a 1-month interval at 1 mg l^?1 2,4-D + 1 mg l^?1 TDZ. Step 3 (PLB induction): the calli were cultured at 2 mg l^?1 NAA + 1 mg l^?1 BA for 2 months. Step 4 (plantlet conversion): the 2-month-old PLBs were cultured at 0.1 mg l^?1 IBA for 4 months. It took at least 6 months to produce well-rooted regenerated plantlets with an average of 3.2 roots and 3.6 leaves from the initial callus. The 6-month-old rooted plantlets were transferred onto PGR-free 1/2 MS medium for 6 months, and then potted with Sphagnum moss for acclimatization. After 2 month of culture, the survival rate was 100 %. The in vitro flowers were obtained on the 8-month-old plantlets at 1 mg l^?1 IBA, 5 mg l^?1 IBA and 0.1 mg l^?1 NAA, but the flowers showed a lack of the gynandrium. The abnormity was overcome by the aid of 5 mg l^?1 TDZ, and subsequently, the capsules formed without artificial pollination. This protocol provides the basis for further investigation on cell suspension, micropropagation, in vitro flowering and breeding programs in Dendrobium huoshanense.     

Plant regeneration of the arsenic hyperaccumulator <Emphasis Type="Italic">Pteris vittata</Emphasis> L<Emphasis Type="Italic">.</Emphasis> from spores and identification of its tolerance and accumulation of arsenic and copper

An in vitro plant regeneration system was established from the spores of Pteris vittata and identification of its tolerance, and accumulation of gametophytes and callous, to arsenic (As) and copper (Cu) was investigated. The highest frequency (100%) of callus formation was achieved from gametophyte explants treated with 0.5 mg l^?1 6-benzylaminopurine (6-BA) + 0.5 mg l^?1 gibberellin acid (GA). Furthermore, sporophytes were differentiated from the callus tissue derived from gametophyte explants on MS medium supplemented with 0.5 mg l^?1 6-BA, 0.5–1.0 mg l^?1 GA and additional 300 mg l^?1 lactalbumin hydrolysate (LH) for 4 weeks. The optimum combination of ½ MS + 1.0 mg l^?1 GA + 0.5 mg l^?1 6-BA + 300 mg l^?1 LH promoted sporophyte formation on 75 ± 10% of the callus. Every callus derived from gametophyte explants could achieve 3–4 sporophytes. The in vitro growth of gametophyte and callus was accelerated in the medium containing Na₃AsO₄ lower than 0.5 mM, but this growth was inhibited with 2 mM Na₃AsO₄. And with the increase of Na₃AsO₄ in the culture medium from 0 to 2 mM, the As accumulation in gametophytes and callus increased and achieved a level of 763.3 and 315.4 mg kg^?1, respectively. Gametophytes and calluses transplanted to culture medium, supplemented with different concentrations of CuSO₄, are similar to those in Na₃AsO₄, and the Cu accumulation in gametophytes could achieve 7,940 mg kg^?1 when gametophytes were subcultured in medium containing 3 mM CuSO₄. These results suggested that the high efficiency propagation system could be a useful and rapid means to identify other heavy metal tolerance and accumulation. Further, the regeneration ability of callus made it possible for genetic transformation of this fern.     

Effects of ascorbic acid,alpha-tocopherol,and glutathione on microspore embryogenesis in Brassica napus L.

The impact of culture conditions and addition of antioxidants to media on microspore embryogenesis in rapeseed (Brassica napus cv. ‘PF704’) was investigated. Different concentrations of ascorbic acid (0, 5, 10, 20, 50, 100, and 200 mg l^?1) and alpha (α)-tocopherol (0, 5, 10, 20, 50, 100, and 200 mg l^?1) were evaluated along with two temperature pretreatments (18 d at 30°C; 2 d at 32.5°C followed by 16 d at 30°C). In addition, combinations of reduced glutathione (0, 10, 50, and 100 mg l^?1) and ascorbic acid (5 and 10 mg l^?1) were tested. Microspore embryogenesis was significantly enhanced using 10 mg l^?1 ascorbic acid (334 embryos per Petri dish) compared with untreated cultures (184 embryos per Petri dish) at 30°C. α-Tocopherol (5 and 10 mg l^?1) enhanced (312 and 314 embryos per Petri dish, respectively) microspore embryogenesis relative to untreated cultures (213 embryos per Petri dish) at 30°C, although there were no significant differences among cultures treated with 5–50 mg l^?1 α-tocopherol. When 50 mg l^?1 α-tocopherol was combined with 5 or 10 mg l^?1 ascorbic acid, embryogenesis was significantly enhanced (308 and 328 embryos per Petri dish, respectively) relative to other ascorbic acid levels. Moreover, 10 mg l^?1 of reduced glutathione and 5 mg l^?l ascorbic acid enhanced microspore embryogenesis (335 embryos per Petri dish) compared to cultures without reduced glutathione (275 embryos per Petri dish). Microspore embryogenesis could be improved by adding ascorbic acid, α-tocopherol, and reduced glutathione when the appropriate combination and temperature pretreatment were selected.     

Biotrickling filtration of isopropanol under intermittent loading conditions

This paper investigates the removal of isopropanol by gas-phase biotrickling filtration. Two plastic packing materials, one structured and one random, have been evaluated in terms of oxygen mass transfer and isopropanol removal efficiency. Oxygen mass transfer experiments were performed at gas velocities of 104 and 312 m h^?1 and liquid velocities between 3 and 33 m h^?1. Both materials showed similar mass transfer coefficients up to liquid velocities of 15 m h^?1. At greater liquid velocities, the structured packing exhibited greater oxygen mass transfer coefficients. Biotrickling filtration experiments were carried out at inlet loads (IL) from 20 to 65 g C m^?3 h^?1 and empty bed residence times (EBRT) from 14 to 160 s. To simulate typical industrial emissions, intermittent isopropanol loading (16 h/day, 5 day/week) and intermittent spraying frequency (15 min/1.5 h) were applied. Maximum elimination capacity of 51 g C m^?3 h^?1 has been obtained for the random packing (IL of 65 g C m^?3 h^?1, EBRT of 50 s). The decrease in irrigation frequency to 15 min every 3 h caused a decrease in the outlet emissions from 86 to 59 mg C Nm^?3 (inlet of 500 mg C Nm^?3). The expansion of spraying to night and weekend periods promoted the degradation of the isopropanol accumulated in the water tank during the day, reaching effluent concentrations as low as 44 mg C Nm^?3. After a 7-week starvation period, the performance was recovered in less than 10 days, proving the robustness of the process.