The Life Cycle of Didymium laxifilum and Physarum album on Oat Agar Culture

The plasmodial slime molds is the largest group in the phylum Amoebozoa. Its life cycle includes the plasmodial trophic stage and the spore‐bearing fruiting bodies. However, only a few species have their complete life cycle known in details so far. This study is the first reporting the morphogenesis of Didymium laxifilum and Physarum album. Spores, from field‐collected sporangia, were incubated into hanging drop cultures for viewing germination and axenic oat agar plates for viewing plasmodial development and sporulation. The spores of D. laxifilum and P. album germinated by method of V‐shape split and minute pore, respectively. The amoeboflagellates, released from spores, were observed in water film. The phaneroplasmodia of two species developed into a number of sporangia by subhypothallic type on oat agar culture. The main interspecific difference of morphogenesis was also discussed.     

Pelagostrobilidium liui n. sp. (Ciliophora,Choreotrichida) from the Coastal Waters of Northeastern Taiwan and an Improved Description of Pelagostrobilidium minutum Liu et al., 2012

The number of somatic kineties in Pelagostrobilidium ranges from 4 to 6 according to the present state of knowledge. This study investigates Pelagostrobilidium liui n. sp. using live observation, protargol stain, and small subunit rDNA data sequencing. Pelagostrobilidium liui n. sp. is characterized by having a spherical‐shaped body, four somatic kineties, with kinety 2 spiraled around the left side of body, about six elongated external membranelles, and invariably no buccal membranelle. It differs from its most similar congener, Pelagostrobilidium minutum Liu et al., 2012 , in (i) cell shape; (ii) macronucleus width; (iii) oral apparatus; (iv) anterior orientation of kinety 2; (v) location where kinety 2 commences; (vi) arrangement of kinety 1; (vii) distance between the anterior cell end and the locations where kineties commence; and (viii) the presence of 12 different bases (including two deletions) in the small subunit rDNA sequences. The diagnosis of P. minutum Liu et al., 2012 is also improved to include the following new characteristics: invariably four somatic kineties; kineties 2 and 4 alone commence at the same level; kinety 2 originates from right anterior cell half on ventral side, extends sinistrally posteriorly, over kinety 1, around left posterior region, terminates near posterior cell end on dorsal side; kinety 1 commences below anterior third of kinety 2.     

A genetic analysis of the quality of northern-style Chinese steamed bread

Dissecting the genetic basis for the traits of northern-style Chinese steamed bread (NCSB) is of great significance for wheat quality breeding. Quantitative trait loci (QTLs) for the processing quality of NCSB were studied using a recombinant inbred line (RIL) consisting of 173 lines derived from a “Shannong01–35 × Gaocheng9411” cross. Twenty-four putative additive QTLs were detected on chromosomes 1A, 1B, 1D, 3A, 3B, 4A, 4B, 5B, 6B, and 7B. Of these QTLs, QTex1A.1-27, QHei5B.5-488, and QGum4B.4-17 had the highest contribution and accounted for 9.33, 10.9, and 12.0% of the phenotypic variations, respectively. Several co-located QTLs with additive effects were detected on chromosomes 1A, 1D, 4B, and 5B. Two clusters (RFL_CONTIG2160_524-WSNP_CAP12_C2438_1180601 and EX_C101685_705-RAC875_C27536_611) for height, total score, and texture and for chewiness, gumminess, and hardness were detected on chromosomes 1A and 4B, respectively. Two QTLs for chewiness and hardness (QCh1D-4, QHa1D-4) with additive effects were detected; these alleles could be good targets for improving the processing quality of steamed bread from common wheat (Triticum aestivum L.). In addition, QTLs for wheat flour quality and the associated correlations with NCSB were simultaneously analyzed. Negative correlations were detected between chewiness and the wet/dry gluten content (WGC/DGC) or protein content. Two QTLs (QCh4B.4-17 and QPr4B.4-17) and three QTLs (QCh4B.4-13, QWG4B.4-13, and QDG4B.4-13) clustered in the same chromosomal region. The detected QTL clusters should be further investigated during wheat breeding and could be used by breeders to improve wheat quality and especially the processing quality of NCSB.     

Practical application of genomic selection in a doubled-haploid winter wheat breeding program

Crop improvement is a long-term, expensive institutional endeavor. Genomic selection (GS), which uses single nucleotide polymorphism (SNP) information to estimate genomic breeding values, has proven efficient to increasing genetic gain by accelerating the breeding process in animal breeding programs. As for crop improvement, with few exceptions, GS applicability remains in the evaluation of algorithm performance. In this study, we examined factors related to GS applicability in line development stage for grain yield using a hard red winter wheat (Triticum aestivum L.) doubled-haploid population. The performance of GS was evaluated in two consecutive years to predict grain yield. In general, the semi-parametric reproducing kernel Hilbert space prediction algorithm outperformed parametric genomic best linear unbiased prediction. For both parametric and semi-parametric algorithms, an upward bias in predictability was apparent in within-year cross-validation, suggesting the prerequisite of cross-year validation for a more reliable prediction. Adjusting the training population’s phenotype for genotype by environment effect had a positive impact on GS model’s predictive ability. Possibly due to marker redundancy, a selected subset of SNPs at an absolute pairwise correlation coefficient threshold value of 0.4 produced comparable results and reduced the computational burden of considering the full SNP set. Finally, in the context of an ongoing breeding and selection effort, the present study has provided a measure of confidence based on the deviation of line selection from GS results, supporting the implementation of GS in wheat variety development.     

Epistemic artefacts: on the uses of complexity in anthropology

Distinctions between the ‘simple’ and the ‘complex’ have enjoyed a long and varied career in anthropology. Simplicity was once part of a collective fantasy about what life was like elsewhere, tingeing studies of tribal life with human longing for simpler ways of being. With the reflexive turn and the rise of cultural critique, simplicity has been all but excommunicated in favour of widespread diagnoses of complexity. In this article, I tease out some transformations in the uses of complexity in anthropology, and weave in some critical responses to these uses, spanning many decades, from within the discipline. I pay special attention to recent critiques by anthropologists who are beginning to grow weary of complexity as both an end‐in‐itself for scholarship and an empirical diagnosis. For these critics, complexity is deeply entwined with anthropological methods and knowledge practices. Drawing on these critical views, I suggest that complexity may be an epistemological artefact, rather than something that can be diagnosed ‘out there’, and offer a way of reframing complexity as a ‘dominant problematic’ in anthropology and beyond.     

Effect of Bone Mineral Density on Rotator Cuff Tear: An Osteoporotic Rabbit Model

IntroductionAn increased bone mineral density (BMD) in the proximity to tendon insertion can improve rotator cuff repair and healing. However, how a decrease of BMD in the humeral head affects the biomechanical properties of the rotator cuff tendon is still unclear. Previous studies have demonstrated ovariectomy in animals to lead to osteoporosis and decreased BMD, and Teriparatide (PTH) administration to improve BMD and strength of bone. This study aimed to explore the correlation between humeral head BMD and infraspinatus (ISP) tendon insertion strength, and if an increase in bone quantity of the humeral head can improve the strength of the rotator cuff.ResultsSignificant differences were observed in the measured humeral head BMD of the Control and OVX-PTH groups compared to the OVX-Saline group (P = 0.0004 and P = 0.0024, respectively). No significant difference was found in failure stress among the three groups, but an expected trend with the control group and OVX-PTH group presenting higher failure strength compared to the OVX-Saline group. BMD at the humeral head showed a positive linear correlation with stress (r² = 0.54). Histology results showed the superiority in OVX-PTH group ISP enthesis compared to the OVX-Saline group.ConclusionBone loss of the humeral head leads to decreased tendon/bone insertion strength of the infraspinatus tendon enthesis. Teriparatide administration can increase bone density of the humeral head and may improve the mechanical properties of the infraspinatus tendon enthesis.     

Insights into the discrepant luminescence for BaSiO3:Eu2+ phosphors prepared by solid‐state reaction and precipitation reaction methods

Two synthesis routes, solid‐state reaction and precipitation reaction, were employed to prepare BaSiO₃:Eu²⁺ phosphors in this study. Discrepancies in the luminescence green emission at 505 nm for the solid‐state reaction method sample and in the yellow emission at 570 nm for the sample prepared by the precipitation reaction method, were observed respectively. A detail investigation about the discrepant luminescence of BaSiO₃:Eu²⁺ phosphors was performed by evaluation of X‐ray diffraction (XRD), photoluminescence (PL)/photoluminescence excitation (PLE), decay time and thermal quenching properties. The results showed that the yellow emission was generated from the BaSiO₃:Eu²⁺ phosphor, while the green emission was ascribed to a small amount of Ba₂SiO₄:Eu²⁺ compound that was present in the solid‐state reaction sample. This work clarifies the luminescence properties of Eu²⁺ ions in BaSiO₃ and Ba₂SiO₄ hosts.