苏云金芽胞杆菌大质粒pBMB165的克隆与分析

以pBeloBAC11为载体,成功构建了苏云金芽胞杆菌YBT-1765的基因组人工染色体(BAC)文库和质粒BAC文库.根据已克隆的包含复制子ori165在内的3.6kb片段中编码复制蛋白Rep165的核苷酸序列设计探针,通过染色体步移方式,对质粒文库和基因组文库进行筛选,得到13个覆盖YBT-1765菌株中质粒pBMB165不同区域的克隆子.通过Hind Ⅲ和BamH Ⅰ酶切分析,建立了质粒pBMB165的物理图谱和线状重叠连锁图,并测算出该质粒的大小为82kb.根据部分核苷酸序列初步统计了pBMB165上转座因子的存在机率.YBT-1765菌株基因组文库的构建和物理图谱的绘制为克隆苏云金芽胞杆菌大质粒提供了一套可行的方案,成功解决了大质粒难克隆的问题.     

Directional cloning of native PCR products with preformed sticky ends (Autosticky PCR)

A novel method for the directional cloning of native PCR products was developed. Abasic sites in DNA templates make DNA polymerases stall at the site during synthesis of the complementary strand. Since the 5′ ends of PCR product strands contain built-in amplification primers, abasic sites within the primers result in the formation of 5′ single-stranded overhangs at the ends of the PCR product, enabling its direct ligation to a suitably cleaved cloning vector without any further modification. This “autosticky PCR” (AS-PCR) overcomes the problems caused by end sensitivity of restriction enzymes, or internal restriction sites within the amplified sequences, and enables the generation of essentially any desired 5′ overhang. Received: 11 August 1998 / Accepted: 2 October 1998     

Directional cloning of native PCR products with preformed sticky ends (Autosticky PCR)

A novel method for the directional cloning of native PCR products was developed. Abasic sites in DNA templates make DNA polymerases stall at the site during synthesis of the complementary strand. Since the 5′ ends of PCR product strands contain built-in amplification primers, abasic sites within the primers result in the formation of 5′ single-stranded overhangs at the ends of the PCR product, enabling its direct ligation to a suitably cleaved cloning vector without any further modification. This “autosticky PCR” (AS-PCR) overcomes the problems caused by end sensitivity of restriction enzymes, or internal restriction sites within the amplified sequences, and enables the generation of essentially any desired 5′ overhang.     

Method for cloning restriction fragments containing the termini of BAC inserts

We have developed a method to isolate the termini of BAC clones. The method is based on the two unique NotI sites located approximately 300 bp on either side of the EcoRI cloning site of the BAC vector pECS-BAC4. Our strategy includes the following steps: (i) generation of Southern blots with BAC clones digested with NotI and a second restriction enzyme; (ii) identification of the termini attached to the NotI/EcoRI fragment of the BAC vector via hybridization with a probe derived from sequences located between one NotI site (left or right arm) and the cloning site; (iii) ligation of the doubly digested BAC clone (NotI and the selected second restriction enzyme) with an equally doubly digested cloning plasmid vector; and (iv) confirmation of the clone as a terminus. This strategy has allowed us to begin the construction of a contig near a common bean gene that controls resistance to a group of potyviruses.     

Cloning and characterization of the termination site tI for the gene int transcript in phage lambda

A series of plasmid vectors containing the multiple cloning site (MCS7) of M13mp7 has been constructed. In one of these vectors a kanamycin-resistance marker has been inserted into the center of the symmetrical MCS7 to yield a restriction-site-mobilizing element (RSM). The drug-resistance marker can be cleaved out of this vector with any of the restriction enzymes that recognize a site of the flanking sequences of the RSM to generate an RSM with either various sticky ends or blunt ends. These fragments can be used for insertion mutagenesis of any target molecule with compatible restriction sites. Insertion mutants are selected by their resistance to kanamycin. When the drug-resistance marker is removed with PstI, a small in-frame insertion can be generated. In addition, two new MCSs having single restriction sites have been formed by altering the symmetrical structure of MCS7. The resulting plasmids pUC8 and pUC9 allow one to clone doubly digested restriction fragments separately with both orientations in respect to the lac promoter. The terminal sequences of any DNA cloned in these plasmids can be characterized using the universal M13 primers.     

Vectors containing infrequently cleaved restriction sites for use in BAL 31 nuclease-assisted and end-label-mediated analysis of cloned DNA fragments

Cloning vectors derived from plasmids pUC8 and pUC18 and phage M13mp10 were constructed so as to have multiple cloning sites (MCS) flanked by the recognition/cleavage sites for the Sfi I and Not I restriction nucleases. Cleavage of vectors containing cloned DNA fragments with either of the infrequently cleaving Sfi I or Not I endonucleases will usually yield linear DNAs cleaved only at the corresponding site in the MCS, so that the cloned insert can be degraded unidirectionally by the duplex exonuclease activity of the BAL 31 nucleases until an amount equal to the length of the vector has been degraded. The ends of the above constructs resulting from cleavage with Not I or Sfi I can readily be labeled, with labeling at only the terminus of the cloned DNA available for the Sfi I site. The BAL 31 nuclease-mediated procedures enhance a previous technique for mapping of restriction enzyme fragments, allow for localization of sequences in cloned segments for which a probe is available, and improve a method for sequencing cloned inserts through the production of sets of nested unidirectional deletions from either end of the parent cloned fragment. The advantages of end-label-mediated restriction site mapping using the above vectors over existing such procedures are also demonstrated.     

Construction of a bacterial artificial chromosome library containing large Eco RI and Hin dIII genomic fragments of lettuce

 Existing bacterial artificial chromosome (BAC) vectors were modified to have unique EcoRI cloning sites. This provided an additional site for generating representative libraries from genomic DNA digested with a variety of enzymes. A BAC library of lettuce was constructed following the partial digestion of genomic DNA with HindIII or EcoRI. Several experimental parameters were investigated and optimized. The BAC library of over 50,000 clones, representing one to two genome equivalents, was constructed from six ligations; average insert sizes for each ligation varied between 92.5 and 142 kb with a combined average insert size of 111 kb. The library was screened with markers linked to disease resistance genes; this identified 134 BAC clones from four regions containing resistance genes. Hybridization with low-copy genomic sequences linked to resistance genes detected fewer clones than expected from previous estimates of genome size. The lack of hybridization to chloroplast and mitochondrial sequences demonstrated that the library was predominantly composed of nuclear DNA. The unique EcoRI site in the BAC vector should allow the integration of BAC cloning with other technologies that utilize EcoRI digestion, such as AFLP^TM markers and RecA-assisted restriction endonuclease (RARE) cleavage, to clone specific large EcoRI fragments from genomic DNA. Received: 5 August 1996 / Accepted: 23 August 1996     

A fast and efficient method for isolation of the BAC end

As a new developmental vector system, the bacterial artificial chromosome (BAC) has been used widely in constructing genomic libraries and in generating transgenic animals. Isolation of the BAC insert end is useful to analyze the BAC clone. Here, we describe a fast and efficient method to obtain the BAC end by ligating the BAC fragments digested with Not I and another selected restriction enzyme into universal cloning vector, followed by determining the correct clones with HindIII digestion. Further DNA sequencing analysis verified the results mentioned above.     

LoxP-directed cloning: use of Cre recombinase as a universal restriction enzyme.

We have developed a novel way to use the Cre/loxP system for in vitro manipulation of DNA and a technique to clone DNA into circular episomes. The method is fast, reliable, and allowsflexible cloning of DNA fragments into episomes containing a loxP site. We show that a loxP site can serve as a universal target site to clone a DNA fragment digested with any restriction enzyme(s). This technique abolishes the need for compatible restriction sites in cloning vectors and targets by generating custom-designed 5' 3', or blunt ends in the desired orientation and reading frame in the vector Therefore, this method eliminates the limitations encountered when DNA fragments are cloned into vectors with a confined number of cloning sites. The 34-bp loxP sequence assures uniqueness, even when large episomes are manipulated. We present three examples, including the manipulation of a bacterial artificial chromosome. Because DNA manipulation takes place at a loxP site, we refer to this technique as loxP-directed cloning.     

利用Red重组系统快速构建基因打靶载体

基因敲除小鼠模型是在哺乳动物体内研究基因功能最可靠的方法之一。利用常规的分子克隆的方法构建基因打靶载体往往工作周期长,对于难度特别大的基因有时甚至无法完成打靶载体的构建。通过合理应用Red重组系统和低拷贝中间载体,利用50bp的同源重组序列直接从BAC载体中克隆了长片段的小鼠基因组序列;将得到的基因组序列再次通过重组和改造,构建了Gpr56等基因的完全敲除并带有报告基因的打靶载体,实现了打靶载体的快速构建。     

A primer-based approach to genome walking

A genome walking strategy based on annealing and ligation of single-stranded DNA primers to 3′ overhangs following restriction endonuclease digestion was developed. A set of primers contains 4 nucleotides at the 3′ end that are complementary to overhangs formed by restriction endonucleasesApaI;PstI;SacI andSphI. Following ligation, 5′ end overhangs are formed on the DNA, which serves as sites for the adaptor primers and nested primers for PCR amplification in combination with the gene-specific primers. This strategy was verified by the amplification of up to 4 kb of a potato leafroll virus full-length infectious clone. The procedure could be adopted to target any upstream and downstream regions flanking known sequences within the plant genome.     

A simplified procedure for cDNA and genomic library construction using nonpalindromic oligonucleotide adaptors

The properties and characteristics of oligonucleotide adaptors for use in a simplified procedure for the construction of cDNA and genomic DNA libraries are described. The adaptors are suitable for joining to blunt ended cDNA or sheared genomic DNA, and then to the cohesive ends of restriction sites in vectors. Each adaptor consists of two oligonucleotides with complementary but nonpalindromic sequences that include an internal restriction site, a 5' phosphorylated blunt end, and an overlapping or staggered 5' hydroxylated end corresponding to a restriction endonuclease site in a vector of choice. Ligation of the blunt end to high molecular weight target DNA proceeds efficiently and there is no tandem concatenation of the adaptor. Insertion into the appropriate vector only requires ligation of the cohesive ends. There is no requirement for methylation, restriction enzyme cleavage, G-C tailing, or denaturation after ligation of the adaptor to the target DNA, all characteristics of other procedures.     

Method for cloning single-stranded oligonucleotides in a plasmid vector

A method for cloning single-stranded oligonucleotides in a plasmid vector has been developed. The method relies on ligation of the oligonucleotide into suitable restriction enzyme sites of the cloning vector such that the site at the 5' end has a 5' overhang [for example, a Bgl II site (A decreases GATCT)], and the site at the 3' end has a 3' overhang [for example, a Sac I site (GAGCT decreases C)]. This arrangement allows the oligonucleotide to anneal to the single-stranded ends of the vector and to be covalently joined by T4 DNA ligase. The complementary strand can be synthesized in vitro to generate a double-stranded plasmid, or the partially single-stranded molecule can be used as a target for site-directed mutagenesis. The subsequent transfer of the oligonucleotide to test plasmids or excision for other manipulations, such as band shift experiments to identify protein binding sites, is facilitated by cloning of the oligonucleotide into a polylinker containing multiple restriction enzyme sites. For this purpose, the plasmid vector, pKP59, which is a 2.0 kB derivative of pBR322 lacking "poison sequences" and containing 16 cloning sites, has been the most satisfactory.     

A simple and versatile method for the preparation of vector-primers by adapter-end-primer ligation

A group of efficient cDNA cloning strategies employs vector-primers where cDNA synthesis starts from the oligo(dT)-primer tail, which is conventionally attached to cloning vectors by use of terminal deoxynucleotidyl transferase. An alternative, efficient and more versatile method of vector-primer preparation is to directly ligate, by use of T4 DNA ligase, a double-digested vector, e.g., pTZ18R/Pst I/Bam HI, to a synthetic (Bam HI)-adapter-end-primer, 5'-pGATCC-Tn or 5'-pGATCC-site-specific sequence. The use of a utility-vector containing a sizable spacer between the two selected restriction sites enables unambiguous separation on agarose gels of the double-digested vector precursors from single-digested ones, further simplifying the vector preparation. The adapter-end-primer ligation method can be applied to any suitable vectors with multiple cloning sites for the preparation of not only oligo(dT)-tailed, but also site-specific sequence-tailed vectors. Thus, the method enables the cDNA cloning of total poly (A+)-mRNAs, as well as specific RNA or mRNA species with or without poly(A)-tail.     

New cloning vectors and techniques for easy and rapid restriction mapping

We have modified plasmid, phage lambda and cosmid cloning vectors to be of general use for easily and unambiguously determining restriction maps of recombinant DNA molecules. Each vector is constructed so that it contains the rarely found NotI restriction site joined to a short synthetic linker sequence that is followed by a multiple cloning site. DNA cloned into these vectors may be restriction-mapped by either of two methods. In one technique, the cloned DNA is completely digested with NotI, followed by partial digestion with any other restriction enzyme. After electrophoresis and transfer to a nylon membrane, the fragments are hybridized to a labeled probe complementary to the NotI linker. In the second technique, referred to as recession hybridization detection, cloned DNA is digested with NotI and then briefly treated with exonuclease III to recess the 3' ends. After hybridizing a labeled complementary oligodeoxynucleotide to the single-stranded 5' end containing the linker sequence, the DNA is partially digested with another restriction enzyme, electrophoresed and the gel is exposed to x-ray film. With either method the size of each labeled fragment corresponds directly to the distance that a restriction site is located from the NotI linker terminus. Methods for obtaining partial restriction enzyme digests have been devised so that as many as 20 different enzymes may be conveniently mapped on a single gel in little more than a day. The vectors and techniques described may also be adapted to automated or semi-automated devices that read fragment lengths and calculate the resulting restriction map.(ABSTRACT TRUNCATED AT 250 WORDS)     

Twin PCRs: a simple and efficient method for directional cloning of PCR products

A simple and efficient method was developed for directional cloning of PCR products without any restriction enzyme digestion of the amplified sequence. Two pairs of primers were designed in which parts of two restriction enzyme recognition sequences were integrated, and the primers were used for two parallel PCRs. The PCR products were mixed, heat denatured and re-annealed to generate hybridized DNA fragments bearing sticky ends compatible with restriction enzymes. This method is particularly useful when it is necessary to use a restriction enzyme but there is an additional internal restriction site within the amplified sequence, or when there are problems caused by end sensitivity of restriction enzymes.     

Vectors with hidden cloning sites

A general strategy is described for using the cleavage site of restriction enzymes in vectors for cloning regardless of how many sites the given enzymes have in the vector. The application of this method allows one to open any vector at its cloning site with protruding ends which can be compatible with almost every commercially available Class II restriction enzyme. By employing this method, the laborious construction of new vectors can be simplified considerably. This general strategy is based on the known ability of Class IIS restriction enzymes to cut any sequence located outside of their recognition site; the introduction of a linker containing recognition site(s) for Class IIS restriction enzyme(s), not present originally in the vector, gives rise to the possibility of opening the vector so as to produce overhangs of arbitrary sequence. In particular, when a symmetrical short sequence representing the protruding end of any Class II enzyme is situated at the cutting position of the Class IIS enzyme, cleavage with the Class IIS enzyme exposes the hitherto hidden, "unique" cloning site. This technique is demonstrated by cloning the cDNA of the multidrug resistance protein to an expression vector.     

Cloning and stable maintenance of DNA fragments over 300 kb in Escherichia coli with conventional plasmid-based vectors.

Bacterial artificial chromosome (BAC) and P1-derived artificial chromosome (PAC) systems were previously developed for cloning of very large eukaryotic DNA fragments in bacteria. We report the feasibility of cloning very large fragments of eukaryotic DNA in bacteria using conventional plasmid-based vectors. One conventional plasmid vector (pGEM11), one conventional binary plasmid vector (pSLJ1711) and one conventional binary cosmid vector (pCLD04541) were investigated using the widely used BAC (pBeloBAC11 and pECBAC1) and BIBAC (BIBAC2) vectors as controls. The plasmid vector pGEM11 yielded clones ranging in insert sizes from 40 to 100 kb, whereas the two binary vectors pCLD04541 and pSLJ1711 yielded clones ranging in insert sizes from 40 to 310 kb. Analysis of the pCLD04541 and pSLJ1711 clones indicated that they had insert sizes and stabilities similar to the BACs and BIBACs. Our findings indicate that conventional plasmid-based vectors are capable of cloning and stably maintaining DNA fragments as large as BACs and PACs in bacteria. These results suggest that many existing plasmid-based vectors, including plant and animal transformation and expression binary vectors, could be directly used for cloning of very large eukaryotic DNA fragments. The pCLD04541 and pSLJ1711 clones were shown to be present at at least 4-5 copies/cell. The high stability of these clones indicates that stability of clones does not seem contingent on single-copy status. The insert sizes and the copy numbers of the pCLD04541 and pSLJ1711 clones indicate that Escherichia coli can stably maintain at least 1200 kb of foreign DNA per cell. These results provide a new conceptual and theoretical basis for development of improved and new vectors for large DNA fragment cloning and transformation. According to this discovery, we have established a system for large DNA fragment cloning in bacteria using the two binary vectors, with which several very large-insert DNA libraries have been developed.     

Restriction digestion monitors facilitate plasmid construction and PCR cloning

Plasmid construction by "forced" or "directional" ligation of fragments digested with two different restriction enzymes is highly efficient, except when inhibited digestion of one site favors vector recircularization. Such failures often result because incomplete double digestion is undetected in vector polylinkers or at terminal cloning sites on a PCR fragment. To test cleavage efficiency indirectly, a "monitor" plasmid is added to the digest. In a suitable monitor, the two test sites are separated by enough DNA (approximately 20% of full length) to distinguish the double digest from the failed single digest. To make this applicable to combinations of 32 popular cloning enzymes, we constructed a set of 4 monitors (pDM1, pDM2, pDM3, and pDM4). Each contains three polylinkers separated by stuffer segments of approximately 1 kb. The 32 sites are distributed in the polylinkers such that at least one plasmid in the set is diagnostic for each enzyme pair. The set is designed to be extended to up to 81 sites. A linearized version of the monitor allows for the determination of which of the two enzymes has failed in an incomplete double digest and is also useful when the target DNA is close to the size of the pDM backbone. The plasmids also serve as versatile self-monitoring cloning vectors for any site combination.