Iron Se-bonded mono-selenocarbonates CpFe(CO)2SeCO2R: the first selenocarbonate complexes

The reactivity of the iron selenide complex (μ-Se)[CpFe(CO)₂]₂ toward chloroformates, ROCOCl, has been studied and the products CpFe(CO)₂SeCO₂R [R=Me (1), Et (2), iso-Bu (3), Ph (4), 2-C₆H₄Cl (5), 4-C₆H₄Cl (6), and 4-C₆H₄NO₂ (7)] have been obtained. The novel complexes, 1-7, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structure of CpFe(CO)₂SeCO₂Et, 2, was determined by an X-ray crystal structure analysis.     

Synthesis and characterization of amine complexes of the cyclopentadienyliron dicarbonyl complex cation, [Cp(CO)2Fe]

The organometallic Lewis acid, [CpFe(CO)₂]⁺ (Cp = η⁵-C₅H₅) reacts with excess dry diethyl ether at low temperatures to form the labile complex [CpFe(CO)₂(Et₂O)]⁺[BF₄]⁻ (1) which is stable at low temperatures and has been fully characterized. Complex 1 in turn reacts with 1-aminoalkanes and α,ω-diaminoalkanes to form new complexes of the type [CpFe(CO)₂NH₂(CH₂)_nCH₃]BF₄ (n = 2-6) (2) and [{CpFe(CO)₂}₂μ-(NH₂(CH₂)_nNH₂)](BF₄)₂ (n = 2-4) (3), respectively. These complexes have been fully characterized and the mass spectral patterns of complexes 2 are reported. The structures of compounds 2a (n = 2) and 2b (n = 3) have been confirmed by single crystal X-ray crystallography. The single crystal X-ray diffraction data show that complex 2a, [CpFe(CO)₂NH₂(CH₂)₂CH₃]BF₄, crystallizes in a triclinic space group while 2b, [CpFe(CO)₂NH₂(CH₂)₃CH₃]BF₄, crystallizes in an orthorhombic Pca2₁ space group with two crystallographically independent molecular cations in the asymmetric unit. Furthermore, the reaction of 1 with 1-alkenes gives the η²-alkene complexes in high yield.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

New aryl phosphinite ligands avoiding ortho-metallation: Synthesis and molecular structures of trans-[PdCl2(PPh2OR)2] and trans-[Rh(CO)Cl(PPh2OR)2] (R = 2,4,6-Me3C6H2; 2,6-Ph2C6H3)

The new aryl phosphinites PPh₂OR (R = 2,4,6-Me₃C₆H₂, 1; R = 2,6-Ph₂C₆H₃, 2) have been prepared from chlorodiphenylphosphine and the corresponding phenols. In these ligands, the ortho-positions of the aromatic phosphite function are blocked by methyl and phenyl substituents, which allows coordination to metal centres without ortho-metallation. Thus, reaction with [PdCl₂(cod)] leads to the complexes trans-[PdCl₂(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 3; R = 2,6-Ph₂C₆H₃, 4), while the reaction with [Rh₂(CO)₄Cl₂] gives trans-[Rh(CO)Cl(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 5; R = 2,6-Ph₂C₆H₃, 6). The single-crystal X-ray structure analyses of 3 and 5 confirm the trans-coordination of the new ligands in these square-planar complexes.     

Main group derivatives of a cyclometallated iron carbonyl anion. Crystal structures of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(SnPh3) and two isomers of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(I)

The iron hydrido complex HFe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄} (1), was rapidly deprotonated by DBU or [BzMe₃N][OH] in THF to afford the new carbonyl iron anion [Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}]⁻ ([2]⁻), containing an ortho-metallated triphenyl phosphite ligand. Complex [2]⁻ reacted with triorganostannyl and plumbyl salts and with halogens to give the octahedral Fe^II compounds Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}(X) (X=SnPh₃, 3; SnMe₃, 4; PbPh₃, 5; PbMe₃, 6; Cl, 7; Br, 8; I, 9). The Group 14 complexes 3-6 were obtained in one isomeric form in which the P^III-donor atoms are mutually cis, the carbonyl ligands are cis and the P(OPh)₃ and MR₃ (M=Sn, Pb; R=Ph, Me) groups are trans as determined by solution-state IR, ³¹P and ¹³C NMR spectroscopic data. This geometry was confirmed for 3 by a single crystal X-ray diffraction study. The halide complexes, however, were obtained as a mixture of isomers. The major isomer (7, X=Cl; 8a, X=Br; 9a, X=I) has cis P atoms, trans CO groups and the halide located trans to the phosphorus atom of the ortho-metallated phosphite ligand. The structure of 9a was confirmed by an X-ray diffraction study. Two other isomers, designated 8b (X=Br) and 9b (X=I), with cis P atoms and cis CO groups were isolated from the reactions of [2]⁻ with Br₂ and I₂, respectively. The structure of the latter was established by X-ray crystallography and is related to 9a by exchange of the P(OPh)₃ ligand and a carbonyl group such that the metal-bound C atom of the five-membered metallacycle is trans to CO. The stereo-geometry of 8b could not be unambiguously assigned from the spectroscopic data; however, two of the seven possible geometric isomers were suggested as plausible structures.     

Synthetic and mechanistic studies on ruthenium dicarbonyl complexes containing PhP(CH2CH2CH2PCy2)2 (Cyttp) ligand

A synthetic and mechanistic study is reported on ligand substitution and other reactions of six-coordinate ruthenium(II) carbonyl complexes containing tridentate PhP(CH₂CH₂CH₂PCy₂)₂ (Cyttp). Carbonylation of cis-mer-Ru(OSO₂CF₃)₂(CO)(Cyttp) (1) affords [cis-mer-Ru(OSO₂CF₃)(CO)₂(Cyttp)]O₃SCF₃ (2(O₃SCF₃)) and, on longer reaction times, [cis-mer-Ru(solvent)(CO)₂(Cyttp)](O₃SCF₃)₂ (solvent = acetone, THF, methanol). 2(O₃SCF₃) reacts with each of NaF, LiCl, LiBr, NaI, and LiHBEt₃ to yield [cis-mer-RuX(CO)₂(Cyttp)]⁺ (X = F (3), Cl (4), Br (5), I (6), H (7)), isolated as 3-7(BPh₄). These conversions proceed with high stereospecificity to afford only a single isomer of the product that is assigned a structure in which the Ph group of Cyttp points toward the CO trans to X (anti when X = F, Cl, Br, or I; syn when X = H). Treatment of 2(O₃SCF₃) with NaOMe and CO generates the methoxycarbonyl complex [cis-mer-Ru(CO₂Me)(CO)₂(Cyttp)]⁺ (8), whereas addition of excess n-BuLi to 2(O₃SCF₃) in THF under CO affords mer-Ru(CO)₂(Cyttp) (9). The two ¹³C isotopomers [cis-mer-Ru(OSO₂CF₃)(CO)(¹³CO)(Cyttp)]O₃SCF₃ (2′(O₃SCF₃): ¹³CO trans to P_C; 2″(O₃SCF₃): ¹³CO cis to all P donors) were synthesized by appropriate adaptations of known transformations and used in mechanistic studies of reactions with each of LiHBEt₃, NaOMe/CO, and n-BuLi. Whereas LiHBEt₃ reacts with 2′(O₃SCF₃) and 2″(O₃SCF₃) to replace triflate by hydride without any scrambling of the carbonyl ligands, the corresponding reactions of NaOMe-CO are more complex. The methoxide combines with the CO cis to triflate in 2, and the resultant methoxycarbonyl ligand ends up positioned trans to the incoming CO in 8. A mechanism is proposed for this transformation. Finally, treatment of either 2′(O₃SCF₃) or 2″(O₃SCF₃) with an excess of n-BuLi leads to the formation of the same two ruthenium(0) isomers of mer-Ru(CO)(¹³CO)(Cyttp). These products represent, to our knowledge, the first example of a syn-anti pair of isomers of a five-coordinate metal complex.     

Ru2(CO)4(OOCR)2L2 sawhorse-type complexes containing axial 5-(4-pyridyl)-10,15,20-triphenylporphyrin ligands

The thermal reaction of Ru₃(CO)₁₂ with various carboxylic acids (benzoic, 4-hydroxyphenylacetic, ferrocenic, stearic, oleic, 4-(octadecyloxy)benzoic) in refluxing tetrahydrofuran, followed by addition of 5-(4-pyridyl)-10,15,20-triphenylporphyrin (L), gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂L₂ (1: R = -C₆H₅, 2: R = -CH₂-p-C₆H₄OH, 3: R = -C₅H₄FeC₅H₅, 4: R = -(CH₂)₁₆CH₃, 5: R = -(CH₂)₇CHCH(CH₂)₇CH₃, 6: R = -p-C₆H₄O(CH₂)₁₇CH₃). Complexes 1-6 were characterised by IR, NMR, and ESI-MS as well as by elemental analysis. The UV-Vis spectra show the Soret band centred at 417 nm and the Q bands at 515, 550, 590 and 645 nm, respectively.     

Synthesis and characterization of isopropylamine complexes of lanthanide(II) diiodides: Molecular structure of TmI2(PrNH2)4 and EuI2(PrNH2)4

It was found that the lanthanide diiodides LnI₂ (1) (Ln = Nd, Sm, Eu, Dy, Tm, Yb) are dissolved in isopropylamine (IPA) without redox transformations. Stability of the formed solutions decreases in a row Eu ≈ Yb > Sm > Tm > Dy > Nd. Removing of a solvent in vacuum leaves complexes LnI₂(IPA)_x (2) (Nd, x = 5; Sm, Eu, Dy, Tm, Yb, x = 4) as crystalline colored solids. Stability of 2-Nd,Dy,Tm is higher than that of known THF or DME coordinated salts. Divalent state of metal in the products is confirmed by data of UV-Vis spectroscopy, magnetic measurements and their chemical behavior. Structure of 2-Eu and 2-Tm was established by X-ray diffraction analysis. Oxidation of 2-Nd,Dy in IPA affords amine-amides (PrⁱNH)Ln(IPA)_y (3) (Nd, y = 4; Dy, x = 3). n-Propylamine also dissolves the iodides 1-Sm,Eu,Dy,Tm,Yb but stability of the solutions is significantly lower. 1-Nd vigorously reacts with PrⁿNH₂ even at −30 °C which hampers the formation of the solution.     

Reactivity of the N-heterocyclic carbene complexes [Ru(IMes)2(CO)HX] (X = OH, Cl) with alkynes

Treatment of the 16-electron hydroxy hydride complex [Ru(IMes)₂(CO)H(OH)] (1, IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene) with HCCR affords the alkynyl species [Ru(IMes)₂(CO)H(CCR)] (R = Ph 3, SiMe₃, 4) and [Ru(IMes)₂(CO)(CCR)₂] (R = Ph, 5). Deuterium labelling studies show that the mono-alkynyl complexes are formed via hydrogen transfer from a coordinated alkyne ligand to Ru-OH, while bis-alkynyl formation is proposed to take place through hydrogen transfer to Ru-H. Both 3 and 5 readily coordinate CO to give the corresponding dicarbonyl species 6 and 7. Addition of HCCPh to the hydride chloride precursor [Ru(IMes)₂(CO)HCl] (2) results in a different reaction pathway involving alkyne insertion into the Ru-H bond to yield the alkenyl chloride complex [Ru(IMes)₂(CO)(CHCHPh)Cl] 8. Complexes 3-8 have been structurally characterised by X-ray crystallography.     

The synthesis and characterization of iron cyanide building blocks: [K]2[CpFe(CN)3] and its pentamethylcyclopentadienyl (Cp*) analog

The synthesis of [K]₂[CpFe(CN)₃] (1) and its pentamethylcyclopentadienyl analog (2) has been described via the photolysis of the corresponding [K][CpFe(CO)(CN)₂] salts in methanol in the presence of KCN. The structure of complex 1 has been characterized by means of X-ray crystallography, where the potassium ions are interacting with the N atoms of the cyanide ligands. As expected, the average ν_CN stretching frequency in the anion is 16 cm⁻¹ higher than that in the more electron-donating pentamethylcyclopentadienyl derivative.     

A new series of iodocarbonyl ruthenium (II) complexes with unsymmetrical phosphine-phosphine sulfide ligands of the type Ph2P(CH2)nP(S)Ph2, n = 1-4: Isolation and structural investigation

Hexa-coordinated chelate complex cis-[Ru(CO)₂I₂(P∩S)] (1a) {P∩S = η²-(P,S)-coordinated} and penta-coordinated non-chelate complexes cis-[Ru(CO)₂I₂(P∼S)] (1b-d) {P∼S = η¹-(P)-coordinated} are produced by the reaction of polymeric [Ru(CO)₂I₂]_n with equimolar quantity of the ligands Ph₂P(CH₂)_nP(S)Ph₂ {n = 1(a), 2(b), 3(c), 4(d)} in dichloromethane at room temperature. The bidentate nature of the ligand a in the complex 1a leads to the formation of five-membered chelate ring which confers extra stability to the complex. On the other hand, 1:2 (Ru:L) molar ratio reaction affords the hexa-coordinated non-chelate complexes cis,cis,trans-[Ru(CO)₂I₂(P∼S)₂] (2a-d) irrespective of the ligands. All the complexes show two equally intense terminal ν(CO) bands in the range 2028-2103 cm⁻¹. The ν(PS) band of complex 1a occurs 23 cm⁻¹ lower region compared to the corresponding free ligand suggesting chelation via metal-sulfur bond formation. X-ray crystallography reveals that the Ru(II) atom occupies the center of a slightly distorted octahedral geometry. The complexes have also been characterized by elemental analysis, ¹H, ¹³C and ³¹P NMR spectroscopy.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Synthesis and transition metal complexes of 3,3-bis(1-vinylimidazol-2-yl)propionic acid, a new N,N,O ligand suitable for copolymerisation

The new N,N,O heteroscorpionate ligand 3,3-bis(1-vinylimidazol-2-yl)propionic acid (Hbvip) (5) was synthesised in five steps starting from 1-vinylimidazole. This ligand is closely related to 3,3-bis(1-methylimidazol-2-yl)propionic acid (Hbmip), but contains two vinyl linker groups which can be used for radical-induced polymerisation reactions. The κ³-N,N,O coordination behaviour of 5 was proven by the synthesis of the tricarbonyl complexes [Re(bvip)(CO)₃] (6), [Mn(bvip)(CO)₃] (7) and [Cu(bvip)₂] (8). To obtain good yields of 6, it was synthesised in water instead of THF. The ligand as well as all three complexes were characterised by X-ray crystallography. Copolymerisation of 5 with pure methyl methacrylate (MMA) or a combination of MMA and ethylene glycol dimethacrylate (EGDMA) led to the solid phases P1 and P2. Polymer-bound rhenium and manganese tricarbonyl complexes could be obtained by the reaction of deprotonated P1 with [MBr(CO)₅] (M = Re, Mn) and also by copolymerisation of 6 and 7 with MMA. In both cases, the facial tripodal binding behaviour was evidenced by IR spectra of the polymers. Furthermore, the content of metal incorporated in the polymers was determined by elemental analysis, AAS or ICP-OES measurements. Reaction of the deprotonated solid phase P1 with copper(II) chloride led to a blue solid-phase (P1-Cu). The UV-Vis absorption maximum of P1-Cu is found at 615 nm, which is almost identical to that found for 8. Thereby, it seems likely that P1 is flexible enough to form bisligand complexes with copper(II). This means that the copper centres act as a kind of crosslinking agents. In contrast, the heterogeneous reaction of P2 with copper(II) chloride yielded a lime green solid phase (P2-Cu). The bathochromic shift of the absorption maximum by 102 nm suggests one-sided bound copper centres.     

Oxidative addition of methyl iodide to [Rh(CO)2I]2: synthesis, structure and reactivity of neutral rhodium acetyl complexes, [Rh(CO)(NCR)(COMe)I2]2

Reaction of [Rh(CO)₂I]₂ (1) with MeI in nitrile solvents gives the neutral acetyl complexes, [Rh(CO)(NCR)(COMe)I₂]₂ (R=Me, 3a; ^tBu, 3b; vinyl, 3c; allyl, 3d). Dimeric, iodide-bridged structures have been confirmed by X-ray crystallography for 3a and 3b. The complexes are centrosymmetric with approximate octahedral geometry about each Rh centre. The iodide bridges are asymmetric, with Rh-(μ-I) trans to acetyl longer than Rh-(μ-I) trans to terminal iodide. In coordinating solvents, 3a forms mononuclear complexes, [Rh(CO)(sol)₂(COMe)I₂] (sol=MeCN, MeOH). Complex 3a reacts with pyridine to give [Rh(CO)(py)(COMe)I₂]₂ and [Rh(CO)(py)₂(COMe)I₂] and with chelating diphosphines to give [Rh(Ph₂P(CH₂)_nPPh₂)(COMe)I₂] (n=2, 3, 4). Addition of MeI to [Ir(CO)₂(NCMe)I] is two orders of magnitude slower than to [Ir(CO)₂I₂]⁻. A mechanism for the reaction of 1 with MeI in MeCN is proposed, involving initial bridge cleavage by solvent to give [Rh(CO)₂(NCMe)I] and participation of the anion [Rh(CO)₂I₂]⁻ as a reactive intermediate. The possible role of neutral Rh(III) species in the mechanism of Rh-catalysed methanol carbonylation is discussed.     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.     

Carboxylate and dicarboxylate derivatives of [Et4N][Re2(CO)6(OR)3] (R = H or Me)

The ligand exchange reaction of the anionic binuclear rhenium complexes (R = H (1) or Me (2)) has been studied with the carboxylic acids; benzoic acid (3, 4, and 5), fumaric acid (6), and terephthalic acid (7). The exchange with benzoic acid can be controlled by stoichiometry to one, two, or three substitutions. The doubly (4) and triply (5) substituted complexes represent new structural motifs for the triply bridged Re₂(CO)₆ unit. The dicarboxylic acids fumaric and terephthalic bridge two dirhenium centers. Crystal structure determinations have been carried out for the new complexes synthesized.     

Supramolecular assemblies of new 2-D complexes: Syntheses, crystal structures, spectroscopic and magnetic properties of {[MnAu2(CN)4(NITpPy)2(H2O)2]}n and {[Co(N(CN)2)2(NITpPy)2(H2O)2]}n

Two new complexes, {[MnAu₂(CN)₄(NITpPy)₂(H₂O)₂]}_n (1) and {[Co(N(CN)₂)₂(NITpPy)₂(H₂O)₂]}_n (2), have been synthesized and characterized. The single-crystal X-ray analysis for the complexes 1 and 2 demonstrates that each M(II) (M = Mn or Co) ion assumes a distorted octahedral MN₄O₂ coordination polyhedron. Four nitrogen atoms come from the cyanide groups and the pyridyl rings in a common plane, and two oxygen atoms come from the H₂O molecules in trans-positions. The structures of complexes 1 and 2 illustrate that aurophilicity and/or hydrogen bonding interactions play important roles in increasing dimensionality. Magnetic investigations on complexes 1 and 2 show the presence of weak antiferromagnetic interactions.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).     

Reaction of [MCl2(CH3CN)2] (M = Pd(II), Pt(II)) compounds with N1-alkylpyridylpyrazole-derived ligands

Palladium(II) and platinum(II) complexes with N-alkylpyridylpyrazole-derived ligands, 2-(1-ethyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L¹) and 2-(1-octyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L²), cis-[MCl₂(L)] (M = Pd(II), Pt(II)), have been synthesised. Treatment of [PdCl₂(L)] (L = L¹, L²) with excess of ligand (L¹, L²), pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ and NaBPh₄ produced the following complexes: [Pd(L)₂](BPh₄)₂, [Pd(L)(py)₂](BPh₄)₂ and [Pd(L)(PPh₃)₂](BPh₄)₂. All complexes have been characterised by elemental analyses, conductivity, IR and NMR spectroscopies. The crystal structures of cis-[PdCl₂(L²)] (2) and cis-[PtCl₂(L¹)] (3) were determined by a single crystal X-ray diffraction method. In both complexes, the metal atom is coordinated by one pyrazole nitrogen, one pyridine nitrogen and two chlorine atoms in a distorted square-planar geometry. In complex 3, π-π stacking between pairs of molecules is observed.     

Antisymbiosis. Preferential coordination of anionic oxygen versus neutral sulfur donor atoms of methylsulfanyl- or methylsulfinyl-acetato, 2-benzoato and 2-phenolato to the cis-Pt(PPh3)2 and Pt(dppe) residues

The interaction of an excess of the title ligands L⁻ with the cis-Pt(phos)₂ moieties gives compounds a-bcis-[Pt(L-O)₂(phos)₂] (a, phos = P(Ph)₃; b, phos = 1/2 dppe), in which O- is preferred to S-coordination. Such preference is confirmed by the fact that the same products are obtained by reaction of excess of L⁻ with the previously reported a-d complexes [Pt(L-O,S)(phos)₂]⁺, (c, phos = PPh₃, d, phos = 1/2 dppe), for which chelate ring opening occurs with rupture of Pt-S rather than Pt-O bonds. Compound a can be obtained also by oxidative addition of HL to [Pt(PPh₃)₃]. The Pt-O bonds in compounds a-d are stable towards substitution by Me₂SO, pyridine and tetramethylthiourea. Substitution of L’s occurs with N,N′-diethyldithiocarbamate, which forms a very stable chelate with Pt(II). Thiourea and N,N′-dimethylthiourea also react, because they give rise to cyclometallated products [Pt(phos)₂(NRC(S)NHR)]⁺ (R = H, CH₃), with one ionised thioamido group, as revealed by an X-ray investigation of [Pt(PPh₃)₂(NHC(S)NH₂)]⁺. The preference of O versus S coordination, as well as the stability of the Pt-O bonds, are discussed in terms of antisymbiosis.