Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Reaction of [MCl2(CH3CN)2] (M = Pd(II), Pt(II)) compounds with N1-alkylpyridylpyrazole-derived ligands

Palladium(II) and platinum(II) complexes with N-alkylpyridylpyrazole-derived ligands, 2-(1-ethyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L¹) and 2-(1-octyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L²), cis-[MCl₂(L)] (M = Pd(II), Pt(II)), have been synthesised. Treatment of [PdCl₂(L)] (L = L¹, L²) with excess of ligand (L¹, L²), pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ and NaBPh₄ produced the following complexes: [Pd(L)₂](BPh₄)₂, [Pd(L)(py)₂](BPh₄)₂ and [Pd(L)(PPh₃)₂](BPh₄)₂. All complexes have been characterised by elemental analyses, conductivity, IR and NMR spectroscopies. The crystal structures of cis-[PdCl₂(L²)] (2) and cis-[PtCl₂(L¹)] (3) were determined by a single crystal X-ray diffraction method. In both complexes, the metal atom is coordinated by one pyrazole nitrogen, one pyridine nitrogen and two chlorine atoms in a distorted square-planar geometry. In complex 3, π-π stacking between pairs of molecules is observed.     

Ligand effects in cis-Ru(N-N)2L2 species where N-N is a substituted 2,2′-bisoxazoline and L is monodentate

Starting from previously reported cis-Ru(MeL)₂Cl₂, where MeL is 4,4,4′,4′-tetramethyl-2,2′-bisoxazoline, cis-Ru(MeL)₂Br₂ (1), cis-Ru(MeL)₂I₂ (2), cis-Ru(MeL)₂(NCS)₂ · H₂O (3), cis-Ru(MeL)₂(N₃)₂ (4) and cis-[Ru(MeL)₂(MeCN)₂](PF₆)₂ · (CH₃)₂CO (5) are synthesised. The X-ray crystal structures of complexes 1, 2, 3 and 5 have been determined. All the five new complexes have been characterized by FTIR, ESIMS and ¹H NMR. In cyclic voltammetry in acetonitrile at a glassy carbon electrode, the complexes display a quasireversible Ru(II/III) couple in the range 0.32-1.71 V versus NHE. The Ru(II/III) potentials yield a satisfactorily linear correlation with Chatt’s ligand constants P_L for the monodantate ligands. From the intercept and by comparing the known situation in Ru(2,2′-bipyridine)₂L₂, it is concluded that MeL, a non-aromatic diimine, is significantly more π-acidic than 2,2′-bipyridine.     

Synthesis of [SnPh2(SR)2] SR = SC6F4-4-H, SC6F5: Reactivity towards group 10 transition metal complexes

The organometallic tin(IV) complexes [SnPh₂(SR^F)₂] SR^F = ⁻SC₆F₄-4-H (1), ⁻SC₆F₅ (2), were synthesized and their reactivity with [MCl₂(PPh₃)₂] M = Ni, Pd and Pt explored. Thus, transmetallation products were obtained affording polymeric [Ni(SR^F)(μ-SR^F)]_n, monomeric cis-[Pt(PPh₃)₂(SC₆F₄-4-H)₂] (3) and cis-[Pt(PPh₃)₂(SC₆F₅)₂] (4) and dimeric species [Pd(PPh₃)(SC₆F₄-4-H)(μ-SC₆F₄-4-H)]₂ (5) and [Pd(PPh₃)(SC₆F₅)(μ-SC₆F₅)]₂ (6) for Ni, Pt and Pd, respectively. The crystal structures of complexes 1, 2, 3, 4 and 6 were determined.     

O-Alkylthio- and O-alkylselenooxalate iron complexes: Structures of CpFe(CO)2ECOCO2Me and [CpFe(CO)2ECO]2

When the iron sulfide complexes (μ-S_x)[CpFe(CO)₂]₂ (x = 2, 3) are treated with O-alkyl oxalyl chlorides ROCOCOCl the complexes CpFe(CO)₂SCOCO₂R (1) [R = Me (a), Et (b)] are obtained. Similarly, the complexes CpFe(CO)₂SeCOCO₂R (2) are obtained from the analogous iron selenide (μ-Se)[CpFe(CO)₂]₂ reaction with the same reagents. Treatment of the iron selenide with half equivalent of oxalyl chloride produces the dimeric complex [CpFe(CO)₂SeCO]₂ (3). The new complexes, 1, 2 and 3, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of 1a, 2a, 3 and [CpFe(CO)₂SCO]₂ (4) were determined by an X-ray crystal structure analysis.     

Structural analysis and magnetic properties of the copper(II) dicyanamide complexes [Cu2(dmphen)2(dca)4], [Cu(dmphen)(dca)(NO3)]n and [Cu(4,4-dmbpy)(H2O)(dca)2] (dca=dicyanamide; dmphen=2,9-dimethyl-1,10-phenanthroline; 4,4-dmbpy=4,4-dimethyl-2,2-bipyridine)

The preparation, crystal structures and magnetic properties of three copper(II) compounds of formulae [Cu₂(dmphen)₂(dca)₄] (1), [Cu(dmphen)(dca)(NO₃)]_n (2) and [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] (3) (dmphen=2,9-dimethyl-1,10-phenanthroline, dca=dicyanamide and 4,4^′-dmbpy=4,4^′-dimethyl-2,2^′-bipyridine) are reported. The structure of 1 consists of discrete copper(II) dinuclear units with double end-to-end dca bridges whereas that of 2 is made up of neutral uniform copper(II) chains with a single symmetrical end-to-end dca bridge. Each copper atom in 1 and 2 is in a distorted square pyramidal environment: two (1) or one (2) nitrile-nitrogen atoms from bridging dca groups, one of the nitrogen atoms of the dmphen molecule (1 and 2) and either one nitrile-nitrogen from a terminal dca ligand (1) or a nitrate-oxygen atom (2) build the equatorial plane whereas the second nitrogen atom of the heterocyclic dmphen fills the axial position (1 and 2). The copper-copper separations through double (1) and single (2) end-to-end dca bridges are 7.1337(7) (1) and 7.6617(7) (2). Compound 3 is a mononuclear copper(II) complex whose structure contains two neutral and crystallographically independent [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] molecules which are packed in two different layer arrangements running parallel to the bc-plane and alternating along the a-axis. The copper atoms in both molecules have slightly distorted square pyramidal surroundings with the two nitrogen atoms of the 4,4^′-dmbpy ligand and two dca nitrile-nitrogen atoms in the basal plane and a water oxygen in the apical position. A semi co-ordinated dca nitrile-nitrogen from a neighbour unit [2.952(6) Å for Cu(2)-N] is in trans position to the apical water molecule in one of the two molecules, this feature representing part of the difference in supramolecular connections in the alternating layers referred to above. Magnetic susceptibility measurements for 1-3 in the temperature range 1.9-290 K reveal the occurrence of weak antiferromagnetic interactions through double [J=−3.3 cm⁻¹ (1), ] and single [J=−0.57 cm⁻¹ (2), ] dca bridges and across intermolecular contacts [θ=−0.07 K (3)].     

Reactivity of the N-heterocyclic carbene complexes [Ru(IMes)2(CO)HX] (X = OH, Cl) with alkynes

Treatment of the 16-electron hydroxy hydride complex [Ru(IMes)₂(CO)H(OH)] (1, IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene) with HCCR affords the alkynyl species [Ru(IMes)₂(CO)H(CCR)] (R = Ph 3, SiMe₃, 4) and [Ru(IMes)₂(CO)(CCR)₂] (R = Ph, 5). Deuterium labelling studies show that the mono-alkynyl complexes are formed via hydrogen transfer from a coordinated alkyne ligand to Ru-OH, while bis-alkynyl formation is proposed to take place through hydrogen transfer to Ru-H. Both 3 and 5 readily coordinate CO to give the corresponding dicarbonyl species 6 and 7. Addition of HCCPh to the hydride chloride precursor [Ru(IMes)₂(CO)HCl] (2) results in a different reaction pathway involving alkyne insertion into the Ru-H bond to yield the alkenyl chloride complex [Ru(IMes)₂(CO)(CHCHPh)Cl] 8. Complexes 3-8 have been structurally characterised by X-ray crystallography.     

New ruthenium complexes from Ru3(CO)12 and 6-Alkyl- or 6-Phenyl-2-hydroxypyridines

Trirutheniumdodecacarbonyl (Ru₃(CO)₁₂) reacts with 2-hydroxy-6-methylpyridine and with 2-hydroxy-5,6,7,8-tetrahydroquinoline in toluene to form centrosymmetric tetranuclear complexes of the type [Ru(η², μ-L)(CO)₂(μ₃-L)Ru(CO)₂]₂, where L is the respective (N,O)-pyridonate ligand (2 and 3). The structures of these complexes, which are almost insoluble in all common solvents, could be determined by single-crystal X-ray diffraction. Reaction of Ru₃(CO)₁₂ with 2-hydroxy-4,6-diphenylpyridine in methanol includes ortho-metallation at the phenyl ring, furnishing the dinuclear complex [Ru(κ²N,C-L)(CO)₂(μ-OCH₃)₂Ru(CO)₂ (κ²N,C-L)] (4), where L = (2-(6-hydroxy-4-phenylpyridin-2-yl)phenyl), according to an X-ray crystal structure determination.     

Antisymbiosis. Preferential coordination of anionic oxygen versus neutral sulfur donor atoms of methylsulfanyl- or methylsulfinyl-acetato, 2-benzoato and 2-phenolato to the cis-Pt(PPh3)2 and Pt(dppe) residues

The interaction of an excess of the title ligands L⁻ with the cis-Pt(phos)₂ moieties gives compounds a-bcis-[Pt(L-O)₂(phos)₂] (a, phos = P(Ph)₃; b, phos = 1/2 dppe), in which O- is preferred to S-coordination. Such preference is confirmed by the fact that the same products are obtained by reaction of excess of L⁻ with the previously reported a-d complexes [Pt(L-O,S)(phos)₂]⁺, (c, phos = PPh₃, d, phos = 1/2 dppe), for which chelate ring opening occurs with rupture of Pt-S rather than Pt-O bonds. Compound a can be obtained also by oxidative addition of HL to [Pt(PPh₃)₃]. The Pt-O bonds in compounds a-d are stable towards substitution by Me₂SO, pyridine and tetramethylthiourea. Substitution of L’s occurs with N,N′-diethyldithiocarbamate, which forms a very stable chelate with Pt(II). Thiourea and N,N′-dimethylthiourea also react, because they give rise to cyclometallated products [Pt(phos)₂(NRC(S)NHR)]⁺ (R = H, CH₃), with one ionised thioamido group, as revealed by an X-ray investigation of [Pt(PPh₃)₂(NHC(S)NH₂)]⁺. The preference of O versus S coordination, as well as the stability of the Pt-O bonds, are discussed in terms of antisymbiosis.     

Ru2(CO)4(OOCR)2L2 sawhorse-type complexes containing axial 5-(4-pyridyl)-10,15,20-triphenylporphyrin ligands

The thermal reaction of Ru₃(CO)₁₂ with various carboxylic acids (benzoic, 4-hydroxyphenylacetic, ferrocenic, stearic, oleic, 4-(octadecyloxy)benzoic) in refluxing tetrahydrofuran, followed by addition of 5-(4-pyridyl)-10,15,20-triphenylporphyrin (L), gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂L₂ (1: R = -C₆H₅, 2: R = -CH₂-p-C₆H₄OH, 3: R = -C₅H₄FeC₅H₅, 4: R = -(CH₂)₁₆CH₃, 5: R = -(CH₂)₇CHCH(CH₂)₇CH₃, 6: R = -p-C₆H₄O(CH₂)₁₇CH₃). Complexes 1-6 were characterised by IR, NMR, and ESI-MS as well as by elemental analysis. The UV-Vis spectra show the Soret band centred at 417 nm and the Q bands at 515, 550, 590 and 645 nm, respectively.     

Rhenium(IV) cyanate complexes: Synthesis, crystal structures and magnetic properties of NBu4[ReBr4(OCN)(DMF)] and (NBu4)2[ReBr(OCN)2(NCO)3]

Two new rhenium(IV) mononuclear compounds of formula NBu₄[ReBr₄(OCN)(DMF)] (1) and (NBu₄)₂[ReBr(OCN)₂(NCO)₃] (2) (NBu₄ = tetrabutylammonium cation, OCN = O-bonded cyanate anion, NCO = N-bonded cyanate anion and DMF = N,N-dimethylformamide) have been synthesized and their crystal structures determined by single-crystal X-ray diffraction. 1 crystallizes in the monoclinic system with the space group P2₁/n, whereas 2 crystallizes in the triclinic one with as space group. In both complexes the rhenium atom is six-coordinated, in 1 by four Br atoms in the equatorial plane, and two trans-oxygen atoms, one of a DMF molecule and another one from a cyanato group, while in 2 by one bromide anion and five cyanate ligands, two of which are O-bonded and three N-bonded, forming a somewhat distorted octahedral surrounding. Magnetic susceptibility measurements on polycrystalline samples of 1 and 2 in the temperature range 1.9-300 K are interpreted in terms of magnetically isolated spin quartets with large values of the zero-field splitting (|2D| is ca. 41.6 and 39.2 cm⁻¹ for 1 and 2, respectively).     

Selective synthesis of triangular cluster oxido-sulfidocomplexes of Mo and W: High yield preparations of [Mo3O2S2(H2O)9], [W3O2S2(H2O)9], [W2MoO2S2(H2O)9] and their derivatization

Reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ or metallic Mo under hydrothermal conditions (140 °C, 4 M HCl) gives oxido-sulfido cluster aqua complex [Mo₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (1). Similarly, [W₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (2) is obtained from [W₂O₂(μ-S)₂(H₂O)₆]²⁺ and W(CO)₆. While reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with W(CO)₆ mainly proceeds as simple reduction to give 1, [W₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ produces new mixed-metal cluster [W₂Mo(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (3) as main product. From solutions of 1 in HCl supramolecular adduct with cucurbit[6]uril (CB[6]) {[Mo₃O₂S₂(H₂O)₆Cl₃]₂CB[6]}Cl₂⋅18H₂O (4) was isolated and structurally characterized. The aqua complexes were converted into acetylacetonates [M₃O₂S₂(acac)₃(py)₃]PF₆ (M₃ = Mo₃, W₃, W₂Mo; 5a-c), which were characterized by X-ray single crystal analysis, electrospray ionization mass spectrometry and ¹H NMR spectroscopy. Crystal structure of (H₅O₂)(Me₄N)₄[W₃(μ₃-S)(μ₂-S)(μ₂-O)₂(NCS)₉] (6), obtained from 2, is also reported.     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.     

6-Halogenopyridin-2-olato complexes with the diruthenium(2+) core: Equilibria between head-to-head and head-to-tail structures

The dinuclear bis(6-X-pyridin-2-olato) ruthenium complexes [Ru₂(μ-XpyO)₂(CO)₄(PPh₃)₂] (X = Cl (4B) and Br (5B)), [Ru₂(μ-XpyO)₂(CO)₄(CH₃CN)₂] (X = Cl (6B), Br (7B) and F (8B)) and [Ru₂(μ-ClpyO)₂(CO)₄(PhCN)₂] (9B) were prepared from the corresponding tetranuclear coordination dimers [Ru₂(μ-XpyO)₂(CO)₄]₂ (1: X = Cl; 2: X = Br) and [Ru₂(μ-FpyO)₂(CO)₆]₂ (3) by treatment with an excess of triphenylphosphane, acetonitrile and benzonitrile, respectively. In the solid state, complexes 4B-9B all have a head-to-tail arrangement of the two pyridonate ligands, as evidenced by X-ray crystal structure analyses of 4B, 6B and 9B, in contrast to the head-to-head arrangement in the precursors 1-3. A temperature- and solvent-dependent equilibrium between the yellow head-to-tail complexes and the red head-to-head complexes 4A-7A and 9A, bearing an axial ligand only at the O,O-substituted ruthenium atom, exists in solution and was studied by NMR spectroscopy. Full ¹H and ¹³C NMR assignments were made in each case. Treatment of 1 and 2 with the N-heterocyclic carbene (NHC) 1-butyl-3-methylimidazolin-2-ylidene provided the complexes [Ru₂(μ-XpyO)₂(CO)₄(NHC)], X = Cl (11A) or Br (12A). An XRD analysis revealed the head-to-head arrangement of the pyridonate ligands and axial coordination of the carbene ligand at the O,O-substituted ruthenium atom. The conversion of 11A and 12A into the corresponding head-to-tail complexes was not possible.     

Hydrogen bonding: further evidence for the cause of the color change of nitrosylpentaamminechromium (III) compounds. Crystal structures of [Cr(NO)(NH3)5](PF6)2 and [Cr(NO)(NH3)5]Cl(PF6)

The crystal structures of [Cr(NO)(NH₃)₅](PF₆)₂ (red) and [Cr(NO)(NH₃)₅]Cl(PF₆) (brown) have been determined. The [Cr(NO)(NH₃)₅]²⁺(A) complex cations in these compounds have a slightly distorted octahedral geometry with a strictly linear Cr-N-O arrangement (from symmetry). The short interatomic distances (2.399 Å × 4) between the O (nitrosyl) and H (ammonia in adjacent complex cations) atoms in A(PF₆)₂ indicate the existence of hydrogen bonds, while the interatomic distances (3.258 Å × 8) between those in ACl(PF₆) are much longer, and the hydrogen bonds should be weak in spite of the presence of the smaller counter anion of chloride ion in ACl(PF₆). Comparisons of the five crystal structures of A(PF₆)₂, ACl₂, ACl(ClO₄), ACl(PF₆), and A(ClO₄)₂ have led to the conclusion that the existence of the strong hydrogen bonds gives red crystals of A(PF₆)₂, while the absence of hydrogen bonds results in the formation of green crystals of A(ClO₄)₂ (O ? H, 3.595 Å × 2). The color change of the crystals (from red to green) with the change of outer sphere anions is attributed to the change of the strength of the hydrogen bonding between the complex cations.     

A new series of iodocarbonyl ruthenium (II) complexes with unsymmetrical phosphine-phosphine sulfide ligands of the type Ph2P(CH2)nP(S)Ph2, n = 1-4: Isolation and structural investigation

Hexa-coordinated chelate complex cis-[Ru(CO)₂I₂(P∩S)] (1a) {P∩S = η²-(P,S)-coordinated} and penta-coordinated non-chelate complexes cis-[Ru(CO)₂I₂(P∼S)] (1b-d) {P∼S = η¹-(P)-coordinated} are produced by the reaction of polymeric [Ru(CO)₂I₂]_n with equimolar quantity of the ligands Ph₂P(CH₂)_nP(S)Ph₂ {n = 1(a), 2(b), 3(c), 4(d)} in dichloromethane at room temperature. The bidentate nature of the ligand a in the complex 1a leads to the formation of five-membered chelate ring which confers extra stability to the complex. On the other hand, 1:2 (Ru:L) molar ratio reaction affords the hexa-coordinated non-chelate complexes cis,cis,trans-[Ru(CO)₂I₂(P∼S)₂] (2a-d) irrespective of the ligands. All the complexes show two equally intense terminal ν(CO) bands in the range 2028-2103 cm⁻¹. The ν(PS) band of complex 1a occurs 23 cm⁻¹ lower region compared to the corresponding free ligand suggesting chelation via metal-sulfur bond formation. X-ray crystallography reveals that the Ru(II) atom occupies the center of a slightly distorted octahedral geometry. The complexes have also been characterized by elemental analysis, ¹H, ¹³C and ³¹P NMR spectroscopy.     

Sn-S and Ru-Ru bonds cleavage reactions between [Ph3SnS(CH2)3SSnPh3] and Ru3(CO)12: X-ray crystal structures of [Ph3SnS(CH2)3SSnPh3] and trans-[Ru(CO)4(SnPh3)2]

The organotin complex [Ph₃SnS(CH₂)₃SSnPh₃] (1) was synthesized by PdCl₂ catalyzed reaction between Ph₃SnCl and disodium-1,3-propanedithiolate which in turn was prepared from 1,2-propanedithiol and sodium in refluxing THF. Reaction of 1 with Ru₃(CO)₁₂ in refluxing THF affords the mononuclear complex trans-[Ru(CO)₄(SnPh₃)₂] (2) and the dinuclear complex [Ru₂(CO)₆(μ-κ²-SCH₂CH₂CH₂S)] (3) in 20 and 11% yields, respectively, formed by cleavage of Sn-S bond of the ligand and Ru-Ru bonds of the cluster. Treatment of pymSSnPPh₃ (pymS = pyrimidine-2-thiolate) with Ru₃(CO)₁₂ at 55-60 °C also gives 2 in 38% yield. Both 1 and 2 have been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

Dioxouranium complexes as ligand. Synthesis and characterization of sandwich-type polyoxometalates [X2W18(UO2)2{(H2O)3M}2O68] (X = As and P) (M = Co, Cu, Mn, Ni and Zn)

The title complexes are synthesized by the reaction of an unusual ligand of [K₂P₂W₁₈(UO₂)₂O₆₈]¹²⁻ (1) and [KAs₂W₁₈(UO₂)₂O₆₈]¹³⁻ (2) with divalent metal ions of Co^II, Cu^II, Mn^II, Ni^II and Zn^II in 1:2 mole ratio and are characterized by elemental analysis, IR, ³¹P NMR, UV-Vis spectroscopy, TGA, and single crystal structure analysis. Crystals of [P₂W₁₈(UO₂)₂{(H₂O)₃Co}₂O₆₈]¹⁰⁻ (1a) and [As₂W₁₈(UO₂)₂{(H₂O)₃Cu}₂O₆₈]¹⁰⁻ (2b) are orthorhombic space group Cmca. Both 1a and 2b have structures in which two [M(H₂O)₃] (M = Co^II, Cu^II) and two UO₂ groups are sandwiched between two symmetry equivalent (XW₉) (X = P, As) units in a virtual C_i symmetry. In solution, 1a and [P₂W₁₈(UO₂)₂{(H₂O)₃Zn}₂O₆₈]¹⁰⁻ (1d) give two-line P NMR spectra that are consistent with a C_s symmetry structures so, are not consistent with the solid-state structures. The sodium salts of them give one-line P NMR spectra and are consistent with the C_i symmetry of solid-state structures. The uranium atoms have pentagonal-bipyramidal coordination, achieved by three equatorial bonds to the one XW₉ and two bonds to the other. The M atoms have octahedral or square pyramidal coordination, but only one bond to the one XW₉ and one bond to the other.     

Stepwise syntheses, structure and spectroscopic studies of ruthenium complexes of 2,6-bis(benzimidazol-2-yl)pyridine with o-iminoquinone ancillary ligand

The ruthenium complexes [Ru^II(bbp)(L)(Cl)] (1), [Ru^II(bbp)(L)(H₂O)] (2) and [Ru^II(bbp)(L)(DMSO)] (3) {bbp = 2,6-bis(benzimidazol-2-yl)pyridine, L = o-iminoquinone} have been synthesized in a stepwise manner starting from [Ru^III(bbp)Cl₃]. The single crystal X-ray structures, except for the complex 2, have been determined. All the complexes were characterized by UV-Vis, FT-IR, ¹H NMR, Mass spectroscopic techniques and cyclic voltammetry. The Ru^III/Ru^II couple for complexes 1, 2, and 3 appears at 0.63, 0.49, 0.55 V, respectively versus SCE. It is observed that complex 2, on refluxing in acetonitrile, results into [Ru^II(bbp)(L)(CH₃CN)], 4 which has been prepared earlier in a different method. The structural, spectral and electrochemical properties of complexes 1, 2 and 3 were compared to those of earlier reported complex 4, [Ru^II(bbp)(L)(CH₃CN)].