Near real-time biosensor-based detection of 2,4-dinitrophenol

A fluorescent biosensor assay has been developed for near real-time detection of 2,4-dinitrophenol (DNP). The assay was based on fluorescent detection principles that allow for the analysis of antibody/antigen interactions in solution using the KinExA immunoassay instrument. Our KinExA consisted of a capillary flow observation cell containing a microporous screen that maintains a compact capture antigen-coated bead bed. The bead bed was comprised of polymethylmethacrylate (PMMA) beads coated with dinitrophenol-human serum albumin (DNP-HSA) conjugate. Phosphate buffered saline (PBS) solutions, containing various concentrations of free DNP, were incubated for 30 min with mouse anti-DNP monoclonal antibody to equilibrium. Solutions containing the DNP-monoclonal antibody complex and possible excess free antibodies were then passed over DNP-HSA labeled beads. The free monoclonal anti-DNP antibody, if available, was then bound to the DNP-HSA fixed on the beads. The system was then flushed with excess PBS to remove unbound reactants in the bead bed. The beads were then subjected to brief contact with PBS solutions containing goat anti-mouse fluorescein isothiocyanate (FITC)-labeled secondary antibody, once again, followed by a short PBS flush. The fluorescence was recorded during the addition of the FITC labeled secondary antibody to the bead bed through the final PBS flushing with the KinExA. The amount of DNP detected could then be determined from the fluorescent slopes that were generated or by the remaining fluorescence that was retained on the beads after final PBS flushing of the system. This assay has been able to detect a minimum of 5 ng/ml of DNP in solution and can be adapted for other analytes of interest simply by changing the capture antigen and antibody pairs.     

Economic comparison of diagnostic antibody production in perfusion stirred tank and in hollow fiber bioreactor processes

The total operating costs of small-scale monoclonal antibody production were calculated for two different upstream options and general downstream procedure based on protein A chromatography. The upstream options were a spin-filter equipped stirred-tank bioreactor (STR) and a hollow fiber bioreactor (HFB). Both the bioreactors were operated in perfusion mode. The total operating costs of the processes were 6,900 €/g for STR option and 6,400 €/g for the HFB option. In the both systems, the costs were dominated by expenses derived from the downstream section (almost 80%) that was almost identical in the both systems. In the upstream section, the investment depreciation was the largest cost item. The lower total costs of the HFB option were a result of lower investment costs and more concentrated product that led into savings also in downstream section. This study brings out the HFB as on viable alternative for stirred-tank bioreactor, especially in small-scale diagnostic monoclonal antibody production.     

Hybridoma perfusion systems: a comparison study

The efficiency of lgM production by hybridoma cells (1) cultured in suspension; (2) entrapped in alginate beads; or (3) packed in hollowfiber cartridge bioreactors, were compared in long-term perfusion cultures. The results showed that steady-state cell concentration and antibody production, per liter of perfused medium per day, were similar when cells were either entrapped in alginate beads of maintained in suspension. These values were also similar whether cells were maintained at high density in a hollowfiber cartridge bioreactro, or at low density in suspension. This work points out that cell behavior and antibody yield are comparable overall in the various perfusion systems currently used. However, a significant reduction of antibody production appeared whenever a part of the viable cells was lost in the filtrate. The reduction was due both to a decrease of viable cell yield and a decline of lgM productivity on a percell basis. This result is well in agreement with the previously presented model of "grow or die" cell cycle system of hybridoma, which proposes that the ratio of arrested to proliferating cells in perfusion cultures, should be increased in proportion to cell retention in the bioreactor, with a concomitant increase of lgM productivity.     

Agitation,aeration and perfusion modules for cell culture bioreactors

For an optimized bioreactor design which is adapted to the cultivation of sensitive animal cells different modular bioreactor components for gentle agitation, sufficient aeration and long-term perfusion were developed and investigated with respect to their suitability from laboratory to production scale. Aeration systems have been designed for both shear sensitive cells and cells which tolerate bubbles. The systems are based on either membranes for bubble-free aeration or stainless steel sparger systems. They were characterized by determination of their oxygen transfer capacity and optimized in cultivation processes of different cell lines under process conditions such as batch and perfusion mode.Different impellers for suspension cells and cells grown on carriers were investigated for their suitability to ensure homogeneous gentle mixing. A large pitch blade impeller as well as a novel 3-blade segment impeller are appropriate for homogeneous mixing at low shear rates. Especially with the 3-blade segment impeller fluid mechanical stress can be reduced at a given stirrer speed which is advantageous for the cultivation of cells attached to microcarriers or extremely shear sensitive suspension cells. However, our results indicate that shear sensitivity of animal cells has been generally overestimated.Continuous perfusion of both suspension cell cultures and cells cultivated on microcarriers could be successfully performed over extended periods of time using stainless steel spinfilters with appropriate pore sizes and systems based on microporous hydrophilic membranes. Spinfilters are suitable cell retention systems for technical scale bioreactors allowing continuous perfusion cultures of suspension cells (pore size 10 to 20 m) as well as anchorage dependent cells grown on microcarriers (pore size 75 m) over six weeks to 3 months.Applying the developed modules for agitation, aeration and perfusion process adapted bioreactor set-ups can be realized which ensure optimum growth and product formation conditions in order to maximize cell and product yields.     

Experience in scale-up of homogeneous perfusion culture for hybridomas

A perfusion system for production of monoclonal antibodies was developed using an externally-mounted, hollow-fibre cartridge. The experimental apparatus was operated for 420 h and demonstrated increased steady-state viable cell concentration with increase in perfusion rate. Antibody titres were up to three times those measured for batch cultures and specific antibody productivity was doubled.The procedure was successfully scaled to a 10 dm³ system which produced antibody under conditions of Good Manufacturing Practice (GMP). A calculation of productivity between the scaled perfusion system and 260 dm³ batch cultures resulted in comparable antibody production, whereas the perfusion allowed a halving in medium utilisation. Reactivity assays conducted on the purified antibody from both batch and perfusion cultures showed no evidence of proteolysis or altered antibody activity in the final perfusion product. This study provides additional support for the use of homogeneous perfusion cultures in production of monoclonal antibodies under GMP conditions.     

High Yield of Human Monoclonal Antibody Produced by Stably Transfected Drosophila Schneider 2 Cells in Perfusion Culture Using Wave Bioreactor

Since it was first introduced in late 1990s Wave bioreactor has been used for protein production by mammalian and insect cell lines. However, using Wave bioreactor to produce human monoclonal antibody by stable Drosophila Schneider 2 (S2) cell transfectants has not been reported before. In this study, S2 cells were co-transfected with an inducible vector expressing human monoclonal antibody heavy and light chains, respectively, specific for hemagglutinin (HA) of H5N1 influenza virus. Stable S2 transfectant clone was selected by limiting dilution assay. Stable S2 transfectant clone that produce the highest amount of human monoclonal antibody was inoculated into two 2-l disposable cellbags, where cell growth and antibody production were compared between batch and perfusion cultures using Wave bioreactor. Here, we report that maximum viable cell density reached 1.06?×?10(7) cells/ml in batch culture; whereas 1.04?×?10(8)?cells/ml was achieved in perfusion culture. The maximum volumetric antibody productivity in batch culture was 52?mg/l/day; while perfusion culture yielded 1,437?mg/l/day. As a result, the total antibody production was 201?mg in batch culture and 8,212?mg in perfusion culture. The antibody produced by both cultures displays full neutralizing activity. Thus, our results provide strong support for using Wave bioreactor in perfusion culture for a large-scale production of human monoclonal antibody by stable S2 cell transfectants.     

Model simulation and analysis of perfusion culture of mammalian cells at high cell density.

Rate equations recently proposed by the authors for growth, death, consumption of nutrients, and formation of lactic acid, ammonium, and monoclonal antibody of hybridoma cells are used to simulate and analyze the behavior of perfusion cultures. Model simulations are in good agreement with experimental results from three different cell lines under varied perfusion and cell bleed rates except for cultures with very low viability. Analysis of simulations and experimental results indicates that in perfusion cultures with a complete cell separation cell bleed rate is a key parameter that strongly affects all the process variables, whereas the perfusion rate mainly affects the total and viable cell concentrations and the volumetric productivity of monoclonal antibody. Growth rate, viability, and specific perfusion rate of cells are only a function of the cell bleed rate. This also applies to cultures with partial cell separation in the permeate if the effective cell bleed rate is considered. It is suggested that the (effective) cell bleed rate of a perfusion culture should be carefully chosen and controlled separately from the perfusion rate. In general, a low cell bleed rate that warrants a reasonable cell viability appears to be desirable for the production of antibodies. Furthermore, model simulations indicate the existence of an optimum initial glucose concentration in the feed. For the cell lines considered, the initial glucose concentration used in normal cell culture media is obviously too high. The initial glutamine concentration can also be reduced to a certain extent without significantly impairing the growth and antibody production but considerably reducing the ammonia concentration. The mathematical model can be used to predict these optimum conditions and may also be used for process design.     

High-level production of a monoclonal antibody in murine myeloma cells by perfusion culture using a gravity settler

A perfusion system is described for the production of a human monoclonal antibody in non-secreting murine myeloma (NS0) cells that was previously shown to be difficult to produce at high levels using fed-batch culture. The perfusion system was based on the use of a commercially available cell settler as the separation device to separate the cells from the culture. Separation efficiency of the cell settler was above 98%. Based on the growth and glucose consumption rates, fresh media was added to the culture and the turnover rate for the bioreactor was set at a maximum of 1.5 times the bioreactor volume per day. The perfusion process resulted in twice the maximum viable cell densities and up to three times the total protein production in a 53-day run period when compared to the fed-batch process. In addition, charge heterogeneity of the antibody as measured by ion exchange chromatography was lower for material purified from the perfusion runs compared to fed-batch. Perfusion mode of culture using a commercially available gravity settler is therefore a viable alternative to fed-batch mode for high-level production of this monoclonal antibody in NS0 cells.     

Achievement of high cell density and high antibody productivity by a controlled-fed perfusion bioreactor process

Controlled feeding of nutrient supplements to a cell culture to enhance monoclonal antibody productivity has been practiced widely in high-yield, fed-batch processes. In this study, a similar feeding concept has been applied to a perfused culture and evaluated for the effects on bioreactor productivity and product quality. Our experimental results show that, by using such a "controlled-fed perfusion" approach, the volumetric antibody productivity (antibody per liter per day) was significantly increased by nearly twofold over the perfusion process, and surpassed fed-batch and batch processes by almost tenfold. The substantial boost in the overall productivity is attributable primarily to the combined effects of increased cell density as well as reduced product dilution. Both were achieved through careful nutrient supplementation in conjunction with metabolite minimization. As the manufacturing process evolved from roller bottles to the controlled-fed perfusion bioreactor system, the immunoreactivity and the cDNA sequences of the antibody were well preserved. However, the product glycosylation distribution patterns did alter. The controlled-feed perfusion process demonstrated a unique encompassment of the advantages of fed-batch and perfusion methods; that is, high product concentration with high volume throughput. Therefore, it may be very suitable for large-scale production of monoclonal antibodies.     

On-line monitoring of monoclonal antibody formation in high density perfusion culture using FIA

An automated flow injection system for on-line analysis of proteins in real fermentation fluids was developed by combining the principles of stopped-flow, merging zones flow injection analysis (FIA) with antigen-antibody reactions. IgG in the sample reacted with its corresponding antibody (a-IgG) in the reagent solution. Formation of insoluble immunocomplexes resulted in an increase of the turbidity which was determined photometrically. This system was used to monitor monoclonal antibody production in high cell density perfusion culture of hybridoma cells. Perfusion was performed with a newly developed static filtration unit equipped with hydrophilic microporous tubular membranes. Different sampling devices were tested to obtain a cell-free sample stream for on-line product anlysis of high molecular weight (e.g., monoclonal antibodies) and low molecular weight (e.g., glucose, lactate) medium components. In fermentation fluids a good correlation (coefficient: 0.996) between the FIA method and an ELISA test was demonstrated. In a high density perfusion cultivation process mAb formation was succesfully monitored on-line over a period of 400 h using a reliable sampling system. Glucose and lactate were measured over the same period of time using a commercially available automatic analyser based on immobilized enzyme technology.Abbreviations TIA Turbidimetric immunoassay - mAb Monoclonal Antibody     

Use of scanning electron microscopy and energy dispersive X-ray spectroscopy to identify key fouling species during alternating tangential filtration

Alternating tangential flow filtration (ATF) has become one of the primary methods for cell retention and clarification in perfusion bioreactors. However, membrane fouling can cause product sieving losses that limit the performance of these systems. This study used scanning electron microscopy and energy dispersive X-ray spectroscopy to identify the nature and location of foulants on 0.2 μm polyethersulfone hollow fiber membranes after use in industrial Chinese hamster ovary cell perfusion bioreactors for monoclonal antibody production. Membrane fouling was dominated by proteinaceous material, primarily host cell proteins along with some monoclonal antibody. Fouling occurred primarily on the lumen surface with much less protein trapped within the depth of the fiber. Protein deposition was also most pronounced near the inlet/exit of the hollow fibers, which are the regions with the greatest flux (and transmembrane pressure) during the cyclical operation of the ATF. These results provide important insights into the underlying phenomena governing the fouling behavior of ATF systems for continuous bioprocessing.     

Different fermentation processes produced variants of an anti-CD52 monoclonal antibody that have divergent in vitro and in vivo characteristics

The anti-CD52 antibody has already been approved for the treatment of patients with resistant chronic lymphocytic leukemia, relapsing-remitting multiple sclerosis, and has demonstrable efficacy against stem cell transplantation rejection. A CHO cell line expressing a humanized anti-CD52 monoclonal antibody (mAb-TH) was cultivated in both fed-batch and perfusion modes, and then purified. The critical quality attributes of these mAb variants were characterized and the pharmacokinetics (PK) properties were investigated. Results showed that the perfusion culture achieved higher productivity, whereas the fed-batch culture produced more aggregates and acid components. Additionally, the perfusion culture produced similar fucose, more galactose and a higher proportion of sialic acid on the anti-CD52 mAb compared to the fed-batch culture. Furthermore, the perfusion process produced anti-CD52 mAb had higher complement-dependent cytotoxicity (CDC) efficacy than that produced by the fed-batch culture, a result probably linked to its higher galactose content. However, antibody produced by fed-batch and perfusion cultures showed similar PK profiles in vivo. In conclusion, perfusion is a more efficient method than fed-batch process in the production of functional anti-CD52 monoclonal antibody. Product quality variants of anti-CD52 mAb were found in different cell culture processes, which demonstrated different physiochemical and biological activities, but comparable PK properties. Whether these observations apply to all mAbs await further investigation.     

Changes in monoclonal antibody productivity of recombinant BHK cells immobilized in collagen gel particles

Animal cell perfusion high density culture is often adopted for the production of biologicals in industry. In high density culture sometimes the productivity of biologicals has been found to be enhanced. Especially in immobilized animal cell culture, significant increase in the productivity has been reported. We have found that the specific monoclonal antibody (MAb) productivity of an immobilized hybridoma cell is enhanced more than double. Several examples of enhancing productivities have been also shown by collagen immobilized cells. Immobilized cells involve some different points from non-immobilized cells in high density culture: In immobilized culture, some cells are contacted together, resulting in locally much higher cell concentration more than 10⁸ cells/ml. Information originating from a cell can be easily transduced to the others in immobilized culture because the distance between cells is much nearer. Here we have performed collagen gel immobilized culture of recombinant BHK cells which produce a human IgG monoclonal antibody in a protein-free medium for more than three months. In this high density culture a stabilized monoclonal antibody production was found with around 8 times higher specific monoclonal antibody productivity compared with that in a batch serum containing culture. No higher MAb productivity was observed using a conditioned medium which was obtained from the high density culture, indicating that no components secreted from the immobilized cells work for enhancing monoclonal antibody production. The MAb productivity by the non-immobilized cells obtained by dissolving collagen using a collagenase gradually decreased and returned to the original level in the batch culture using a fresh medium. This suggests that the direct contact of the cells or a very close distance between the cells has something to do with the enhancement of the MAb productivity, and the higher productivity is kept for a while in each cell after they are drawn apart.     

Calcium alginate immobilized hybridomas grown using a fluidized-bed perfusion system with a protein-free medium

Hybridoma SPO1 cells were immobilized in calcium alginate beads and were further grown in a fluidized-bed perfusion system with a protein-free medium. The presence of serum in the steps of entrapment was shown to be helpful for the preservation of cell viability. Each step during immobilization was investigated with respect to the extent of cell damage caused. The immobilization process using small beads caused a lower cell viability initially but allowed a higher rate of cell growth subsequently, compared to those in large beads. In a perfusion system for the continuous production of monoclonal antibodies (MAb), the viable cell density reached 2×10⁷ cells per ml of beads with a viability of 40%. Compared with the cells in suspension culture, the immobilized SPO1 cells showed higher viable cell based specific rates of substrate uptake (glucose and glutamine) and of MAb production. A significant drop in the formation of lactate after the cell growth entered a steady state suggested a higher activity of the Tricarboxylic Acid Cycle in the cells when the cell density became high.     

A computer-aided approach to compare the production economics of fed-batch and perfusion culture under uncertainty

Fed-batch and perfusion culture dominate mammalian cell culture production processes. In this paper, a decision-support tool was employed to evaluate the economic feasibility of both culture modes via a case study based upon the large-scale production of monoclonal antibodies. The trade-offs between the relative simplicity but higher start-up costs of fed-batch processes and the high productivity but higher chances of equipment failure of perfusion processes were analysed. Deterministic analysis showed that whilst there was an insignificant difference (3%) between the cost of goods per gram (COG/g) values, the perfusion option benefited from a 42% reduction in capital investment and a 12% higher projected net present value (NPV). When Monte Carlo simulations were used to account for uncertainties in titre and yield, as well as the risks of contamination and filter fouling, the frequency distributions for the output metrics revealed that neither process route offered the best of both NPV or product output. A product output criterion was formulated and the options that met the criterion were compared based on their reward/risk ratio. The perfusion option was no longer feasible as it failed to meet the product output criterion and the fed-batch option had a 100% higher reward/risk ratio. The tool indicated that in this particular case, the probabilities of contamination and fouling in the perfusion option need to be reduced from 10% to 3% for this option to have the higher reward/risk ratio. The case study highlighted the limitations of relying on deterministic analysis alone.     

Effective production of anti-tetanus toxoid and anti-HBsAg human monoclonal antibodies by serum-free culture of hybridomas

Two hybridoma systems, mouse·human-human (m·h-h) heterohybridoma and human-human (h-h) hybridoma, have been established, and hybridomas secreting anti-tetanus toxoid and anti-HBsAg human monoclonal antibodies (MoAbs), both having a neutralizing activity have been obtained. Cell-line improvement was shown to be an efficient method for improving the productivity in a cell culture process. Two kinds of serum-free media, GFS (a serum substitute)-containing media and polyethylene glycol (PEG)-containing media, have been established to produce human MoAbs. m·h-h Heterohybridomas could be cultivated for a long period by perfusion culture in an agitation vessel, but h-h hybridomas could not. We found that h-h hybridomas show growth-associated antibody production kinetics and established two kinds of long-term cultivation systems: continuous perfusion culture and semicontinuous immobilized perfusion culture. We also scaled up batch culture and short-term perfusion culture to 200-L and 50-L fermentors, respectively. Processes for large-scale purification from the culture supernatants of both GFS- and PEG-containing serum-free media have also been developed.     

Application of a cell-once-through perfusion strategy for production of recombinant antibody from rCHO cells in a Centritech Lab II centrifuge system

Based upon the results of scale-down intermittent perfusion processes, a cell-once-through (COT) perfusion concept was applied to a dual bioreactor system coupled to a Centritech Lab II centrifuge for culture of recombinant Chinese hamster ovary (rCHO) cells for monoclonal antibody production. In this new culture mode, i.e., the COT perfusion process, total spent medium was transferred to the centrifuge and a fixed percentage was removed. Approximately 99% of the viable cells are transferred to another bioreactor filled with fresh medium by single operation of the Centritech Lab II centrifuge system for about 30 min. Accordingly, a significant reduction of the cell-passage frequency to the centrifuge led to minimization of cell damage caused by mechanical shear stress, oxygen limitation, nutrient limitation, and low temperature outside the bioreactor. The effects of culture temperature shift and fortified medium on cell growth and recombinant antibody production in the COT perfusion process were investigated. Although the suppressive effects of low culture temperature on cell growth led to a loss of stability in a long-term COT perfusion culture system, the average antibody concentration at 33 degrees C was 157.8 mg/L, approximately 2.4-fold higher than that at 37 degrees C. By the use of a fortified medium at 37 degrees C, rCHO cells were maintained at high density above 1.2 x 10(7) cells/mL, and antibody was produced continuously in a range of 260-280 mg/L in a stable long-term COT perfusion culture. The proposed new culture mode, the COT perfusion approach, guarantees the recovery of rCHO cells damaged by lowered temperature or high lactate and ammonium concentration. It will be an attractive choice for minimization of cell damage and stable long-term antibody production with high cell density.     

Influence of cell- and media-derived factors on the integrity of a human monoclonal antibody after secretion into serum-free cell culture supernatants

To investigate the effects of factors secreted by different cell lines on human monoclonal antibody (MAb) integrity, 600 mg of a human MAb, which specifically binds to human erythrocytes, were produced in a perfusion process. After purification by protein A affinity chromatography, the MAb was used for integrity testing in supernatants of several cell lines to investigate their potential to degrade the antibody in the extracellular environment. One insect cell line (IPLB-SF-21 AE) and four mammalian cell lines [CHO K1, BHK-21 (C13), C1271, P3-X63-Ag8.653], all of them commonly used for the production of recombinant proteins, and the human-human-mouse heterohybridoma cell line itself (H-CB-hahE), were adapted to serum-free culture media. For integrity testing all cell lines were cultivated in spinner flasks using serum-free media supplemented with 30 mug mL(-1) of purified MAb. MAb integrity was assayed by SDS polyacrylamide gel electrophoresis (SDS-PAGE), isoelectric focusing, both followed by Western blotting, and an antigen binding assay. None of the mammalian cells showed any detectable effects on antibody stability and integrity during exponential growth, whereas isoelectric focusing of monoclonal antibody taken from IPLB-SF-21 AE culture supernatants revealed a new band indicating a partial modification of the MAb by secreted factors of these cells. This observation did not correlate with the total proteolytic activity, which was measured in all supernatants and found to be lowest in the insest cell cultures. For mammalian cell cultures, it could be concluded from these findings that shifts of the antibody microheterogeneity pattern, which can be found normally as a result of variations in different production parameters, are not caused by extracellular factors once the product has been secreted into the supernatant. In addition to their well-known advantages in posttranslational modifications (e.g., formation of complex type N-glycans), mammalian cells appear to be more suitable as expression systems for human monoclonal antibodies to be used in vivo when compared with baculovirus-infected insect cells. (c) 1995 John Wiley & Sons, Inc.     

Impact of S-sulfocysteine on fragments and trisulfide bond linkages in monoclonal antibodies

The quality of recombinant proteins such as monoclonal antibodies produced using Chinese hamster ovary cell-based mammalian systems is dependent on many factors, including cell line, process and cell culture media. Due to these factors, the generated product is heterogeneous and may have chemically-induced modifications or post-translational modifications that affect antibody stability, functionality and, in some cases, patient safety. This study demonstrates that S-sulfocysteine, a cysteine derivative, can increase the antibody specific productivity in different cell lines cultivated with different processes while minimizing trisulfide linkages in generated mAbs, mainly between heavy and light chain. The supplementation of a cell culture feed with S-sulfocysteine also proved to be useful to reduce the percentage of antibody fragments generated from the monoclonal antibody. Overall, this new component used in the upstream process allows a reduction of product heterogeneity.     

Cell Culture conditions determine the enhancement of specific monoclonal antibody productivity of calcium alginate-entrapped S3H5/gamma2bA2 hybridoma cells

Immobilization offers several intrinsic advantages over free suspension cultures for the production of monoclonal antibodies. An important advantage of immobilization is the improved specific monoclonal antibody (MAb) productivity (q(MAb)) that can be obtained. However, there are conflicting reports in the literature on the enhancement of the q(MAb) with immobilization. The discrepancies between these reports can be attributed to the different to either the cultivation methods used for immobilized cell or to difference between the cell lines used in the various studies. We show that these differences may be attributed to the different cultivation methods used for one model hybridoma cell line. S3H5/Upsilon2bA2 hybridoma cells entrapped in different sizes of calcium alginate beads were cultivated in both T- and spinner flasks in order to determine whether cultivation methods (T- and spinner flasks) and bead size influence the q(MAb) Free-suspended cell cultures inoculated with cells recovered from alginate beads were also carried out in order to determine whether changes in the q(Mab) of the entrapped cells are reversible.The cultivation methods was found to influence significantly the q(MAb) of the entrapped cells. When the entrapped cells in 1-mn diameter beads were cultivated in T-flasks, the q(MAb) was not increased by 200% as previously observed in an entrapped cell culture using 1-mm-diameter alginate beads in spinner flasks. The q(MAb) of the entrapped cell was approximately 58% higher than that of the free-suspended cells in a control experiment. Unlike the cultivation method, the bead size in the range of 1- to 3-mm diameter did not significantly influence the q(MAb), regardless of cultivations methods. The changes in q(MAb) of an entrapped cells were reversible. When the free-suspended cells recovered from the T- and spinner flasks were sub-cultured in T- and spinner flasks enhanced q(MAb) of the entrapped cells in both cases decreased to the level of the free-suspended cell in a control experiments. Taken together, these results shows that the method of cultivation of hybridoma cells immobilized in alginate beads determines the extent of enhancement of the q(MAb). (c) 1993 John Wiley & Sons, Inc.