Nucleotide sequence of the transposable DNA-element IS2.

The complete sequence of the transposable DNA element IS2 in gal OP-308:: IS2 (I) has been determined. This element is 1.327 bp long. The integrated element is flanked by a five base pair long sequence duplication. The termini of IS2 are not perfect inverted repeats, but a close approximation.     

Isolation of a new insertion sequence, IS13655, and its application to Corynebacterium glutamicum genome mutagenesis

A new functional Corynebacterium glutamicum insertion sequence (IS) element, IS13655, was isolated using a suicide vector. The IS element was 1,293 bp in size and contained 26-bp imperfect inverted repeats (IRs) and 3-bp target site duplication as direct repeats (DRs). IS13655 harbored two ORFs with high similarity to the transposase of IS1206, an IS3 family element. IS13655 revealed relatively high transposition efficiency, with low target site selectivity along the Corynebacterium glutamicum R genome, making it a potentially useful genetic engineering tool.     

Nucleotide sequence and characterization of a repetitive DNA element from the genome of Bordetella pertussis with characteristics of an insertion sequence

A repeating element of DNA has been isolated and sequenced from the genome of Bordetella pertussis. Restriction map analysis of this element shows single internal ClaI, SphI, BstEII and SalI sites. Over 40 DNA fragments are seen in ClaI digests of B. pertussis genomic DNA to which the repetitive DNA sequence hybridizes. Sequence analysis of the repeat reveals that it has properties consistent with bacterial insertion sequence (IS) elements. These properties include its length of 1053 bp, multiple copy number and presence of 28 bp of near-perfect inverted repeats at its termini. Unlike most IS elements, the presence of this element in the B. pertussis genome is not associated with a short duplication in the target DNA sequence. This repeating element is not found in the genomes of B. parapertussis or B. bronchiseptica. Analysis of a DNA fragment adjacent to one copy of the repetitive DNA sequence has identified a different repeating element which is found in nine copies in B. parapertussis and four copies in B. pertussis, suggesting that there may be other repeating DNA elements in the different Bordetella species. Computer analysis of the B. pertussis repetitive DNA element has revealed no significant nucleotide homology between it and any other bacterial transposable elements, suggesting that this repetitive sequence is specific for B. pertussis.     

An Acetobacter xylinum insertion sequence element associated with inactivation of cellulose production.

An insertion sequence (IS) element, IS1031, caused insertions associated with spontaneous cellulose deficient (Cel-) mutants of Acetobacter xylinum ATCC 23769. The element was discovered during hybridization analysis of DNAs from Cel- mutants of A. xylinum ATCC 23769 with pAXC145, an indigenous plasmid from a Cel- mutant of A. xylinum NRCC 17005. An IS element, IS1031B, apparently identical to IS1031, was identified on pAXC145. IS1031 is about 950 bp. DNA sequencing showed that the two elements had identical termini with inverted repeats of 24 bp containing two mismatches and that they generated 3-bp target sequence duplications. The A. xylinum ATCC 23769 wild type carries seven copies of IS1031. Southern hybridization showed that 8 of 17 independently isolated spontaneous Cel- mutants of ATCC 23769 contained insertions of an element homologous to IS1031. Most insertions were in unique sites, indicating low insertion specificity. Significantly, two insertions were 0.5 kb upstream of a recently identified cellulose synthase gene. Attempts to isolate spontaneous cellulose-producing revertants of these two Cel- insertion mutants by selection in static cultures were unsuccessful. Instead, pseudorevertants that made waxlike films in the liquid-air interface were obtained. The two pseudorevertants carried new insertions of an IS1031-like element in nonidentical sites of the genome without excision of the previous insertions. Taken together, these results suggest that indigenous IS elements contribute to genetic instability in A. xylinum. The elements might also be useful as genetic tools in this organism and related species.     

Nucleotide sequence of IS110, an insertion sequence of Streptomyces coelicolor A3(2).

The nucleotide sequences of the Streptomyces transposable element IS110 and its insertion site in the DNA of a derivative of the temperate phage luminal diameter C31 were determined. The element is inserted about 460 bp from the right-hand end of luminal diameter C31 DNA, in a region of apparently non-coding DNA. The target site (in a run of seven C residues) is within an 11 bp sequence homologous with one end of IS110. The inserted element is flanked by runs of 11 and 15 C residues which form part of more extensive regions of homology between the left and right junction regions. Imperfect inverted repeats (10 matches out of 15 bp) are present near (but not at) the ends of IS110. The whole IS110 element contains about 1550 bp of which 71% are G-C bp. One major potentially protein-coding region (ORF 1215) was detected, of 1215 bp, the product of which, a presumptively soluble protein of MR 43,563, was not overtly related to any entry in a protein sequence database. A smaller open reading frame (ORF 330) was tentatively identified in the opposite strand of the ORF 1215 region.     

Characterization of IS1001, an insertion sequence element of Bordetella parapertussis.

By analysis of repetitive DNA in Bordetella parapertussis, an insertion sequence element, designated IS1001, was identified. Sequence analysis revealed that IS1001 comprised 1,306 bp and contained inverted repeats at its termini. Furthermore, several open reading frames that may code for transposition functions were identified. The largest open reading frame coded for a protein comprising 406 amino acid residues and showed homology to TnpA, which is encoded by an insertion sequence element (IS1096) found in Mycobacterium smegmatis. Examination of flanking sequences revealed that insertion of IS1001 occurs preferentially in stretches of T's or A's and results in a duplication of target sequences of 6 to 8 bases. IS1001 was found in about 20 copies in 10 B. parapertussis strains analyzed. No restriction fragment length polymorphism was observed in B. parapertussis when IS1001 was used as a probe. An insertion sequence element similar or identical to IS1001 was found in B. bronchiseptica strains isolated from pigs and a rabbit. In these strains, about five copies of the IS1001-like element were present at different positions in the bacterial chromosome. Neither B. pertussis nor B. bronchiseptica strains isolated from humans and dogs contained an IS1001-like element. Therefore, IS1001 may be used as a specific probe for the detection of B. parapertussis in human clinical samples.     

Nucleotide sequence of IS26, a new prokaryotic mobile genetic element.

The DNA sequence of a new IS element, the IS26, is 820 bp long and carries 14 bp perfect terminal inverted repeats. Upon integration, IS26 generates an 8 bp duplication of its target sequence. A large open reading frame within IS26 could code for a protein of 234 amino acids. On its reverse strand, IS26 also carries one large open reading frame, 591 bp long, which contains no stop codon within IS26.     

A new insertion sequence, ISCb1, from Clostridium beijernickii NCIMB 8052

The NCIMB 8052 strain of Clostridium beijerinckii contains nine copies of a novel insertion sequence, ISCb1, belonging to the IS4 family. The 1764 bp element has 18 bp inverted repeats at its extremities, and generates 11 bp target repeats upon insertion. It contains a 1365 bp ORF whose predicted product (455 amino acids) resembles bacterial transposases. The highly conserved DD(35)E motif is present, as are signatures characteristic of the N3 and C1 domains of bacterial transposases. Codon usage of the ORF is somewhat different from that of other C. beijerinckii genes, suggesting that ISCb1 may have been acquired from another organism by horizontal gene transfer in the evolutionary past. One ISCb1 copy lies close to the site of insertion of Tn 1545 in a mutant strain, C10, which shows a reduced tendency to degenerate (i.e. loss of the potential to form solvents) compared with the wild type. In the C10 strain, the characteristic pattern of DNA fragments detected by an IS-specific probe was altered, but this was due to the Tn1545 insertion itself, rather than an ISCb1-mediated genome re-arrangement. There is currently no evidence that the element is involved in strain degeneration, since 12 independently isolated spontaneous mutants that had lost the ability to form solvents had the same ISCb1 profile as that of the wild type strain. The element is apparently restricted to a series of closely related solvent-forming clostridia.     

The inverted repeats of IS<Emphasis Type="Italic">1384</Emphasis>, a newly described insertion sequence from<Emphasis Type="Italic"> Pseudomonas putida</Emphasis> strain H,represent the specific target for integration of IS<Emphasis Type="Italic">1383</Emphasis>

Analysis of a region on plasmid pPGH1 from Pseudomonas putida strain H that is flanked by two copies of IS1383 has revealed an additional element with the typical features of a bacterial insertion sequence. This new IS element, designated IS1384, contains a single ORF of 972 bp, and is flanked by 9-bp inverted repeats. Based on sequence homology and structural characteristics of the putative transposase it encodes, IS1384 belongs to the IS5 subgroup of the IS5 family. Two copies of IS1384 are present on plasmid pPGH1, whereas none could be detected on the chromosome of P. putida strain H. Sequence analysis revealed the presence of two truncated copies of IS1384 on the second plasmid in this strain, pPGH2. The inverted repeats of all IS1384 copies (including the truncated ones) are interrupted by the integration of an IS1383 element. All integrations were found to be site- and orientation-specific. PCR studies and sequence data indicate that IS1383 can form a circular intermediate on excision. In the circular form, the previously described 13-bp inverted repeats of IS1383 are separated by 10 bp that are identical to the 5-bp motif that flanks each side of the element when it is integrated in its target. We provide evidence that these additional nucleotides, although not of inverted symmetry, represent an essential part of the inverted repeats. Furthermore, the data indicate that IS1383 integrated into the inverted repeats of IS1384 by a site-specific recombination rather than a site-specific insertion event.     

Sequence and distribution of IS866, a novel T region-associated insertion sequence from Agrobacterium tumefaciens

We have identified a new insertion sequence, IS866, located in the auxin synthesis gene TA iaaH of Tm4, a wide host range biotype III octopine/cucumopine type Agrobacterium tumefaciens strain with two T regions on its tumor-inducing (Ti) plasmid, TA, and TB. IS866 is 2716 bp long, has inverted repeats of 27 bp with three mismatches, and generates 8-bp direct repeats upon integration. In addition to IS866, pTiTm4 carries two copies of a related element, IS867, associated with TA and TB, respectively. A systematic study of 92 virulent Agrobacterium strains has shown that among the three biotypes all octopine/cucumopine and vitopine biotype III isolates contain IS866-like elements. The various octopine/cucumopine Ti plasmids always carry IS866 and IS867 at the same position as in pTiTm4. The chromosomes of the bacteria which contain these Ti plasmids also carry IS866 and IS867 copies but in varying numbers and locations.     

Isolation, characterization, and nucleotide sequence of IS1202, an insertion sequence of Streptococcus pneumoniae.

A comparative hybridization protocol was used to isolate a small segment of DNA present in the Streptococcus pneumoniae type 19F strain SSZ but absent from strain Rx1, a nonencapsulated derivative of the type 2 strain D39. This segment of DNA is a 1,747-bp insertion sequence, designated IS1202, flanked by 23-bp imperfect inverted repeats and containing a single open reading frame sufficient to encode a 54.4-kDa polypeptide. A 27-bp target sequence is duplicated at either end of the element. IS1202 is not related to any of the currently known insertion elements and is the first reported for S. pneumoniae. Although found predominantly in type 19F strains in up to five copies, it has also been shown to be present in the chromosomes of pneumococci belonging to other serotypes. One of the four IS1202 copies in the encapsulated strain SSZ is located 1,009 bp downstream of the dexB gene, and transformation studies reveal that it is also closely linked to the type 19F capsular polysaccharide synthesis (cps) locus.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

IS902, an insertion element of the chronic-enteritis-causing Mycobacterium avium subsp. silvaticum.

An insertion sequence element of Mycobacterium avium subsp. silvaticum was isolated and its complete nucleotide sequence determined. IS902 is 1470 bp in size and is repeated 10-12 times per genome. An open reading frame of 1200 bp was identified, encoding a protein product of Mr 43932. This protein is highly similar to the predicted proteins of IS900 of Mycobacterium paratuberculosis, IS116 of Streptomyces clavuligerus and IS110 of Streptomyces coelicolor. IS902 lacks terminal inverted repeats and flanking direct repeats but displays insertion site specificity.     

Characterization of a Mycobacterium tuberculosis insertion sequence belonging to the IS3 family

A repetitive element (IS986), previously isolated from Mycobacterium tuberculosis and shown to detect multiple restriction fragment-length polymorphisms (RFLPs), has been sequenced. It consists of a potential insertion sequence of 1358bp, with 30-bp inverted repeat ends. IS986 has four potentially significant open reading frames (ORFs): ORFa1, ORFa2 and ORFb on one strand and ORFc on the complementary strand. The sequences of the potential translated products identify IS986 as a member of the IS3 family, with an apparent frameshift between ORFa1 and ORFa2. IS986 has potential as a highly specific probe for detection and typing of M. tuberculosis, as well as for transposon mutagenesis of mycobacteria. The sequence of IS986 is virtually identical to that of another recently described element, IS6110 (Thierry et al., 1990).     

Characterization of insertion sequence IS892 and related elements from the cyanobacterium Anabaena sp. strain PCC 7120.

IS892, one of the several insertion sequence (IS) elements discovered in Anabaena sp. strain PCC 7120 (Y. Cai and C. P. Wolk, J. Bacteriol. 172:3138-3145, 1990), is 1,675 bp with 24-bp near-perfect inverted terminal repeats and has two open reading frames (ORFs) that could code for proteins of 233 and 137 amino acids. Upon insertion into target sites, this IS generates an 8-bp directly repeated target duplication. A 32-bp sequence in the region between ORF1 and ORF2 is similar to the sequence of the inverted termini. Similar inverted repeats are found within each of those three segments, and the sequences of these repeats bear some similarity to the 11-bp direct repeats flanking the 11-kb insertion interrupting the nifD gene of this strain (J. W. Golden, S. J. Robinson, and R. Haselkorn, Nature [London] 314:419-423, 1985). A sequence similar to that of a binding site for the Escherichia coli integration host factor is found about 120 bp from the left end of IS892. Partial nucleotide sequences of active IS elements IS892N and IS892T, members of the IS892 family from the same Anabaena strain, were shown to be very similar to the sequence of IS892.     

A new insertion sequence element,ISLdl1, in Lactobacillus delbrueckii subsp. lactis ATCC 15808

A new insertion sequence element designated ISLdl1 has been isolated and characterized from Lactobacillus delbrueckii subsp. lactis ATCC 15808. It is the first IS element of L. delbrueckii subsp. lactis described. ISLdl1 is a 1508 bp element flanked by 26 bp imperfect inverted repeats, and generates an 8 bp AT-rich target duplication upon insertion. It contains one ORF encoding a protein of 455 amino acids. This protein shows significant homology to the transposases of the ISL3 family and to other bacterial transposases and putative transposases, and no homology to other proteins. Based on these structural features, ISLdl1 belongs to the ISL3 family. ISLdl1 is present in about 10-12 copies in the genome of ATCC 15808 based on Southern hybridization analysis. Location sites of eight ISLdl1 copies have been determined in more detail by cloning and sequencing one or both of the flanking regions of each ISLdl1 copy. ISLdl1 or ISLdl1-like IS elements were found exclusively in Lactobacillus delbrueckii species and in all strains of subsp. lactis tested. The nucleotide sequence of ISLdl1 is deposited under the accession number AJ302652.     

The novel insertion sequences IS1417, IS1418, and IS1419 from Burkholderia glumae and their strain distribution

Three insertion sequences, IS1417, IS1418, and IS1419, were isolated from Burkholderia glumae (formerly Pseudomonas glumae), a gram-negative rice pathogenic bacterium, on the basis of their abilities to activate the expression of the neo gene of the entrap vector pSHI1063. The 1335-bp IS1417 element with 17-bp imperfect terminal inverted repeats was found to be flanked by 5-bp direct repeats of the vector sequence. IS1418 is 865 bp in length and carries 15-bp inverted repeats with a target duplication of 3 bp. The 1215-bp IS1419 sequence is bounded by the 36-bp terminal inverted repeats of the element and 7-bp direct repeats of the vector sequence. IS1417 and IS1418 belong to the IS2 subgroup of the IS3 family and the IS427 subgroup of the IS5 family, respectively, whereas IS1419 does not appear to be a member of any known IS family. Southern blot analysis of DNAs from B. glumae field isolates indicated that those IS elements are widely distributed, but the host range of the three IS elements appears to be limited to B. glumae and some other related species such as B. plantarii. The polymorphisms exhibited in B. glumae isolates suggest that those elements are useful for molecular epidemiological studies of B. glumae infections.