Characterization of insertion sequence IS892 and related elements from the cyanobacterium Anabaena sp. strain PCC 7120.

IS892, one of the several insertion sequence (IS) elements discovered in Anabaena sp. strain PCC 7120 (Y. Cai and C. P. Wolk, J. Bacteriol. 172:3138-3145, 1990), is 1,675 bp with 24-bp near-perfect inverted terminal repeats and has two open reading frames (ORFs) that could code for proteins of 233 and 137 amino acids. Upon insertion into target sites, this IS generates an 8-bp directly repeated target duplication. A 32-bp sequence in the region between ORF1 and ORF2 is similar to the sequence of the inverted termini. Similar inverted repeats are found within each of those three segments, and the sequences of these repeats bear some similarity to the 11-bp direct repeats flanking the 11-kb insertion interrupting the nifD gene of this strain (J. W. Golden, S. J. Robinson, and R. Haselkorn, Nature [London] 314:419-423, 1985). A sequence similar to that of a binding site for the Escherichia coli integration host factor is found about 120 bp from the left end of IS892. Partial nucleotide sequences of active IS elements IS892N and IS892T, members of the IS892 family from the same Anabaena strain, were shown to be very similar to the sequence of IS892.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

Analysis of the regulatory region of the protease III (ptr) gene of Escherichia coli K-12

The ptr gene of Escherichia coli encodes protease III (Mr 110,000) and a 50-kDa polypeptide, both of which are found in the periplasmic space. The gene is physically located between the recC and recB loci on the E. coli chromosome. The nucleotide sequence of a 1167-bp EcoRV-ClaI fragment of chromosomal DNA containing the promoter region and 885 bp of the ptr coding sequence has been determined. S1 nuclease mapping analysis showed that the major 5' end of the ptr mRNA was localized 127 bp upstream from the ATG start codon. The open reading frame (ORF), preceded by a Shine-Dalgarno sequence, extends to the end of the sequenced DNA. Downstream from the -35 and -10 regions is a sequence that strongly fits the consensus sequence of known nitrogen-regulated promoters. A signal peptide of 23 amino acids residues is present at the N terminus of the derived amino acid sequence. The cleavage site as well as the ORF were confirmed by sequencing the N terminus of mature protease III.     

Mitochondrial DNA sequence analysis of the cytochrome oxidase subunit II gene from Podospora anserina. A group IA intron with a putative alternative splice site

A 5 kb region of the 95 kb mitochondrial genome of Podospora anserina race s has been mapped and sequenced (1 kb = 10(3) base-pairs). This DNA region is continuous with the sequence for the ND4L and ND5 gene complex in the accompanying paper. We show that this sequence contains the gene for cytochrome oxidase subunit II (COII). This gene is 4 kb in length and is interrupted by a subgroup IB intron (1267 base-pairs (bp) in length) and a subgroup IA intron (1992 bp in length). This group IA intron has a long open reading frame (ORF; 472 amino acid residues) discontinuous with the upstream exon sequence. A putative alternative splice site is present, which brings the ORF into phase with the 5' exon sequence. The 5'- and 3'-flanking regions of the COII gene contain G + C-rich palindromic sequences that resemble similar sequences flanking many Neurospora crassa mitochondrial genes.     

A novel IS element,IS621, of the IS110/IS492 family transposes to a specific site in repetitive extragenic palindromic sequences in Escherichia coli

An Escherichia coli strain, ECOR28, was found to have insertions of an identical sequence (1,279 bp in length) at 10 loci in its genome. This insertion sequence (named IS621) has one large open reading frame encoding a putative protein that is 326 amino acids in length. A computer-aided homology search using the DNA sequence as the query revealed that IS621 was homologous to the piv genes, encoding pilin gene invertase (PIV). A homology search using the amino acid sequence of the putative protein encoded by IS621 as the query revealed that the protein also has partial homology to transposases encoded by the IS110/IS492 family elements, which were known to have partial homology to PIV. This indicates that IS621 belongs to the IS110/IS492 family but is most closely related to the piv genes. In fact, a phylogenetic tree constructed on the basis of amino acid sequences of PIV proteins and transposases revealed that IS621 belongs to the piv gene group, which is distinct from the IS110/IS492 family elements, which form several groups. PIV proteins and transposases encoded by the IS110/IS492 family elements, including IS621, have four acidic amino acid residues, which are conserved at positions in their N-terminal regions. These residues may constitute a tetrad D-E(or D)-D-D motif as the catalytic center. Interestingly, IS621 was inserted at specific sites within repetitive extragenic palindromic (REP) sequences at 10 loci in the ECOR28 genome. IS621 may not recognize the entire REP sequence in transposition, but it recognizes a 15-bp sequence conserved in the REP sequences around the target site. There are several elements belonging to the IS110/IS492 family that also transpose to specific sites in the repeated sequences, as does IS621. IS621 does not have terminal inverted repeats like most of the IS110/IS492 family elements. The terminal sequences of IS621 have homology with the 26-bp inverted repeat sequences of pilin gene inversion sites that are recognized and used for inversion of pilin genes by PIV. This suggests that IS621 initiates transposition through recognition of their terminal regions and cleavage at the ends by a mechanism similar to that used for PIV to promote inversion at the pilin gene inversion sites.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

The nucleotide sequence and protein-coding capability of the transposable element IS5

The nucleotide sequence of IS5, a bacterial insertion sequence, has been determined. It is 1195 bp long and contains an inverted terminal repetition of 16 bp with one mismatch. One open reading frame, spanning nearly the entire length of the element, could encode a polypeptide of 338 amino acids. Upon insertion into a DNA segment, IS5 causes a duplication of 4 bp. Based on seven examples, this site of insertion appears to be nonrandom, and the consensus target site sequence is C . T/A . A . G/A (or C/T . T . A/T . G on the opposite strand). The nucleotide sequences of IS5 insertions into the B and cim genes of bacteriophage Mu have allowed tentative identification of the protein-coding frames of B and cim.     

Sequence and characteristics of IS900, an insertion element identified in a human Crohn's disease isolate of Mycobacterium paratuberculosis.

The complete sequence of an insertion element IS900 in Mycobacterium paratuberculosis is reported. This is the first characterised example of a mycobacterial insertion element. IS900 consists of 1451bp of which 66% is G + C. It lacks terminal inverted and direct repeats, characteristic of Escherichia coli insertion elements but shows a degree of target sequence specificity. A single open reading frame (ORF 1197) coding for 399 amino acids is predicted. This amino acid sequence, and to a lesser extent the nucleotide sequence, show significant homologies to IS110, an insertion element of Streptomyces coelicolor A3(2). It is proposed that IS900, IS110, and similar insertion elements recently identified in disease isolates of Mycobacterium avium are members of a phylogenetically related family. IS900 will provide highly specific markers for the precise identification of Mycobacterium paratuberculosis, useful in defining its relationship to animal and human diseases.     

Three new insertion sequence elements ISLdl2, ISLdl3, and ISLdl4 in Lactobacillus delbrueckii: isolation,molecular characterization,and potential use for strain identification

A group of new insertion sequence (IS) elements, ISLdl2, ISLdl3, and ISLdl4, from Lactobacillus delbrueckii subsp. lactis ATCC 15808 was isolated, characterized, and used for strain identification together with ISLdl1, recently characterized as an L. delbrueckii IS element belonging to the ISL3 family. ISLdl2 was 1367 bp in size and had a 24 bp IR and an 8 bp DR. The single ORF of ISLdl2 encoded a protein of 392 aa similar to transposases of the IS256 family. ISLdl3 had a single ORF encoding a protein of 343 aa similar to transposases of the IS30 family. Finally, ISLdl4 had a single ORF encoding a protein of 406 aa and displayed homology to the transposases of the IS110 family. ISLdl4 was only slight different from ISL4 (Accession No. AY040213). ISLdl1, ISLdl2, and ISLdl4 were present in all of the 10 L. delbrueckii subsp. lactis and subsp. delbrueckii strains tested, as well as in three of the 11 L. delbrueckii subsp. bulgaricus strains tested. ISLdl3 was present only in four closely related strains of L. delbrueckii subsp. lactis. These IS elements were not observed in Lactobacillus rhamnosus, Lactobacillus acidophilus, Lactobacillus helveticus, or Lactobacillus plantarum. A cluster of IS elements, ISLdl1, ISLdl2, ISLdl3, ISLdl4, and ISL6, was observed in L. delbrueckii subsp. lactis strain ATCC 15808. Within this cluster, ISLdl4 was inserted into ISLdl1 between the left IR and the start codon of ORF455, encoding a putative transposase. Most of the integration sites of the IS elements were strain-specific. We have observed that IS elements can migrate from one strain to another as integral parts of bacterial DNA by using phage LL-H as a vehicle. We demonstrate for the first time that inverse PCR and vectorette PCR methods with primers based on sequences of the IS elements could be used for identification of L. delbrueckii strains.     

A new insertion sequence, ISCb1, from Clostridium beijernickii NCIMB 8052

The NCIMB 8052 strain of Clostridium beijerinckii contains nine copies of a novel insertion sequence, ISCb1, belonging to the IS4 family. The 1764 bp element has 18 bp inverted repeats at its extremities, and generates 11 bp target repeats upon insertion. It contains a 1365 bp ORF whose predicted product (455 amino acids) resembles bacterial transposases. The highly conserved DD(35)E motif is present, as are signatures characteristic of the N3 and C1 domains of bacterial transposases. Codon usage of the ORF is somewhat different from that of other C. beijerinckii genes, suggesting that ISCb1 may have been acquired from another organism by horizontal gene transfer in the evolutionary past. One ISCb1 copy lies close to the site of insertion of Tn 1545 in a mutant strain, C10, which shows a reduced tendency to degenerate (i.e. loss of the potential to form solvents) compared with the wild type. In the C10 strain, the characteristic pattern of DNA fragments detected by an IS-specific probe was altered, but this was due to the Tn1545 insertion itself, rather than an ISCb1-mediated genome re-arrangement. There is currently no evidence that the element is involved in strain degeneration, since 12 independently isolated spontaneous mutants that had lost the ability to form solvents had the same ISCb1 profile as that of the wild type strain. The element is apparently restricted to a series of closely related solvent-forming clostridia.     

Nucleotide sequence of the traD region in the Escherichia coli F sex factor

The complete nucleotide sequence has been determined of a 3635-bp region, extending from the HpaI site in traT, at F coordinate 90.3 kb, to beyond the end of traD, of the F sex factor plasmid of Escherichia coli K-12. This region contains the C-terminal coding part of traT and the entire traD gene. An open reading frame (ORF) of 2148 bp within the sequence confirms that traD encodes an 81.4-kDa cytoplasmic membrane protein. The TraD protein has several regions with an unusually high pI (greater than 10), suggesting that they may correspond to the DNA-binding domains. Several other ORFs were detected within the region including the gene (ORF1) for a 26.3-kDa protein and ORF2, probably corresponding to traI, which continues to the end of the sequence. An ORF for an 8.5-kDa protein preceded by an excellent promoter and ribosome-binding site is present in the region following traD but on the opposite strand. This promoter is thought to correspond to the major RNA polymerase binding site in this region, implying that traI does not have its own promoter. The lack of a typical terminator following traD and ORF1 and the translational coupling provided by overlapping stop and start codons is consistent with this conclusion.     

Novel insertion sequence IS1380 from Acetobacter pasteurianus is involved in loss of ethanol-oxidizing ability.

Acetobacter pasteurianus NCI1380, a thermophilic strain isolated from the surface culture of acetic acid fermentation, showed genetic instability to produce at high frequency spontaneous mutants which were deficient in ethanol oxidation because of the loss of alcohol dehydrogenase activity. Southern hybridization experiments with the cloned alcohol dehydrogenase-cytochrome c gene cluster as the probe showed insertion of an unknown DNA fragment into a specific position in the cytochrome c gene in most of the mutant strains. Cloning and sequencing analyses revealed that the inserted sequence was 1,665 bp in length and had a terminal inverted repeat of 15 bp. In addition, this inserted sequence was found to generate a 4-bp duplication at the inserted site upon transposition. The target site specificity was not very strict, but a TCGA sequence appeared to be preferentially used. The inserted sequence contains two long open reading frames of 461 and 222 amino acids which are overlapped and encoded by different strands. Although these open reading frames showed no homology to any protein registered in the DNA data bases, the longer open reading frame contained many basic amino acids (87 of 461), as was observed with transposases of so-called insertion sequence (IS) elements. All of these characteristics are typical of IS elements, and the sequence was named IS1380. The copy number of IS1380 in a cell of A. pasteurianus NCI1380 was estimated to be about 100. Several strains of acetic acid bacteria also contained IS1380 at high copy numbers. These results suggest that IS1380 is associated with the genetic loss of ethanol-oxidizing ability as well as the genetic instability of acetic acid bacteria in general.     

DNA sequence of IS91 and identification of the transposase gene.

IS91 is a 1,830-bp insertion sequence that inserts specifically at the sequence CAAG or GAAC of the target and does not duplicate any sequence upon insertion (23). By transposon mutagenesis, we have identified open reading frame 426 (ORF426; bp 454 to 1731) as the putative ORF for the transposase. It displays a cysteine-rich, potential metal-binding domain in its N-terminal region. Adjacent to ORF426, there is an ORF (ORF121) which precedes and terminally overlaps ORF426 by one amino acid. Tn1732 insertions in ORF121 do not affect the transposition frequency. IS91 has sequence similarities to IS801 from Pseudomonas syringae. Their putative transposases are 36% identical, including conservation of the cysteine-rich cluster. The information concerning IS801 insertion specificity and target duplication has been reevaluated in the light of our results.     

Identification of an insertion sequence, IS1081, in Mycobacterium bovis

Abstract: An insertion sequence, IS1081, in the genome of Mycobacterium bovis has been identified and sequenced. It is 1324 bp long with 15 bp inverted repeat ends and contains a large ORF. There are six copies of IS1081 in the genome of M. bovis and the element is also present in Mycobacterium tuberculosis . IS1081 is not closely related to other DNA elements described in actinomycetes but its putative transposase bears some resemblance to that of IS256 from Staphylococcus aureus . IS1081 may be useful for genetic manipulations and for developing a diagnostic test for bovine tuberculosis based on the polymerase chain reaction.     

Identification of an insertion sequence, IS1081, in Mycobacterium bovis.

An insertion sequence, IS1081, in the genome of Mycobacterium bovis has been identified and sequenced. It is 1324 bp long with 15 bp inverted repeat ends and contains a large ORF. There are six copies of IS1081 in the genome of M. bovis and the element is also present in Mycobacterium tuberculosis. IS1081 is not closely related to other DNA elements described in actinomycetes but its putative transposase bears some resemblance to that of IS256 from Staphylococcus aureus. IS1081 may be useful for genetic manipulations and for developing a diagnostic test for bovine tuberculosis based on the polymerase chain reaction.     

A human dihydrofolate reductase intronless pseudogene with an Alu repetitive sequence: multiple DNA insertions at a single chromosomal site

A dihydrofolate reductase (DHFR) pseudogene, hDHFR-psi 3 has been isolated from a human genomic DNA fragment library. Sequence analysis of this gene revealed a lack of introns and the presence of a tract of nine adenines, 90 bp downstream from the end of the coding sequence. These features suggest that hDHFR-psi 3 was derived from a processed RNA molecule that has been converted into DNA and inserted into a chromosome, analogous to the origin of three intronless human DHFR genes previously described. An interesting feature of hDHFR-psi 3 is the presence of a member of the Alu moderately repetitive DNA sequence family within the DHFR coding region. This Alu element is flanked by a 16 bp directly repeated DNA segment derived from DHFR coding sequences. The Alu element apparently has been inserted into the intronless DHFR pseudogene and thus, there have been two insertions at a single chromosomal locus. The hDHFR-psi 3 contains only the 3' half of the DHFR coding sequence. Immediately upstream from the directly repeated sequence before the Alu element is an adenine-rich tract. The DNA farther upstream is moderately repetitive and is related to neither DHFR nor Alu DNA sequence. Therefore, it seems possible that a third insertion has occurred at the same site further disrupting the hDHFR coding sequences.