Reliability of ultrasound speckle tracking with singular value decomposition for quantifying displacement in the carpal tunnel

Inhibited movement patterns of carpal tunnel structures have been found in carpal tunnel syndrome (CTS) patients. Motion analysis on ultrasound images allows us to non-invasively study the (relative) movement of carpal tunnel structures and recently a speckle tracking method using singular value decomposition (SVD) has been proposed to optimize this tracking. This study aims to assess the reliability of longitudinal speckle tracking with SVD in both healthy volunteers and patients with CTS.Images from sixteen healthy volunteers and twenty-two CTS patients were used. Ultrasound clips of the third superficial flexor tendon and surrounding subsynovial connective tissue (SSCT) were acquired during finger flexion-extension. A custom made tracking algorithm was used for the analysis. Intra-class correlation coefficients (ICCs) were calculated using a single measure, two-way random model with absolute agreement and Bland-Altman plots were added for graphical representation.ICC values varied between 0.73 and 0.95 in the control group and 0.66–0.98 in the CTS patients, with the majority of the results classified as good to excellent. Tendon tracking showed higher reliability values compared to the SSCT, but values between the control and CTS groups were comparable.Speckle tracking with SVD can reliably be used to analyze longitudinal movement of anatomical structures with different sizes and compositions within the context of the carpal tunnel in both a healthy as well as a pathological state. Based on these results, this technique also holds relevant potential for areas where ultrasound based dynamic imaging requires quantification of motion.     

Finite element analysis for transverse carpal ligament tensile strain and carpal arch area

Mechanics of carpal tunnel soft tissue, such as fat, muscle and transverse carpal ligament (TCL), around the median nerve may render the median nerve vulnerable to compression neuropathy. The purpose of this study was to understand the roles of carpal tunnel soft tissue mechanical properties and intratunnel pressure on the TCL tensile strain and carpal arch area (CAA) using finite element analysis (FEA). Manual segmentation of the thenar muscles, skin, fat, TCL, hamate bone, and trapezium bone in the transverse plane at distal carpal tunnel were obtained from B-mode ultrasound images of one cadaveric hand. Sensitivity analyses were conducted to examine the dependence of TCL tensile strain and CAA on TCL elastic modulus (0.125–10 MPa volar-dorsally; 1.375–110 MPa transversely), skin-fat and thenar muscle initial shear modulus (1.6–160 kPa for skin-fat; 0.425–42.5 kPa for muscle), and intratunnel pressure (60–480 mmHg). Predictions of TCL tensile strain under different intratunnel pressures were validated with the experimental data obtained on the same cadaveric hand. Results showed that skin, fat and muscles had little effect on the TCL tensile strain and CAA changes. However, TCL tensile strain and CAA increased with decreased elastic modulus of TCL and increased intratunnel pressure. The TCL tensile strain and CAA increased linearly with increased pressure while increased exponentially with decreased elastic modulus of TCL. Softening the TCL by decreasing the elastic modulus may be an alternative clinical approach to carpal tunnel expansion to accommodate elevated intratunnel pressure and alleviate median nerve compression neuropathy.     

高频超声联合剪切波弹性成像对于上肢神经卡压综合征的诊断价值

摘要 目的：探讨高频超声联合剪切波弹性成像对于上肢神经卡压综合征的诊断价值。方法：收集2017年1月-2022年11月于我院收治的行手术治疗的66例上肢神经卡压综合征患者作为观察组,并将其按照疾病严重程度分为轻度组、中重度组,其中腕管综合征43例、轻度组18例、中重度组25例,肘管综合征23例、轻度组12例、中重度组11例,选取同时期66例健康人群作为对照组。所有受试者均行常规超声及剪切波弹性成像检查,在豌豆骨及肘管入口水平分别测量正中神经及尺神经前后径、左右径、横截面面积、杨氏模量。比较各个测量指标在各组间的差异。以临床诊断为金标准,分析高频超声及高频超声联合剪切波弹性成像对上肢神经卡压综合征临床分型价值。结果：观察组正中神经横截面积、杨氏模量均显著高于对照组,差异具有统计学意义（P<0.05);观察组尺神经左右径、横截面积、杨氏模量均显著高于对照组,差异具有统计学意义（P<0.05）;中重度组正中神经、尺神经杨氏模量均显著高于轻度组,差异具有统计学意义（P<0.05）;高频超声、高频超声联合剪切波弹性成像对腕管综合征临床分型的准确率为65.12%、81.40%,敏感度为61.11%、83.33%,特异度为68.0%、80.0%,精确度为57.89%、75.0%;高频超声、高频超声联合剪切波弹性成像对肘管综合征临床分型的准确率为52.17%、78.26%、敏感度为58.33%、83.33%、特异度为45.45%、72.73%、精确度为53.85%、76.92%。结论：高频超声联合剪切波弹性成像对上肢神经卡压综合征表现出较好的诊断价值,可实现以无创的方式对该疾病做出准确诊断。     

Finite element model of subsynovial connective tissue deformation due to tendon excursion in the human carpal tunnel

Carpal tunnel syndrome (CTS) is a nerve entrapment disease, which has been extensively studied by the engineering and medical community. Although the direct cause is unknown, in vivo and in vitro medical research has shown that tendon excursion creates microtears in the subsynovial connective tissue (SSCT) surrounding the tendon in the carpal tunnel. One proposed mechanism for the SSCT injury is shearing, which is believed to cause fibrosis of the SSCT. Few studies have reported quantitative observations of SSCT response to mechanical loading. Our proposed model is a 2-D section that consists of an FDS tendon, interstitial SSCT and adjacent stationary tendons. We believe that developing this model will allow the most complete quantitative observations of SSCT response to mechanical loading reported thus far. Boundary conditions were applied to the FEA model to simulate single finger flexion. A velocity was applied to the FDS tendon in the model to match loading conditions of the documented cadaver wrist kinematics studies. The cadaveric and FEA displacement results were compared to investigate the magnitude of stiffness required for the SSCT section of the model. The relative motions between the model and cadavers matched more closely than the absolute displacements. Since cadaveric models do not allow identification of the SSCT layers, an FEA model will help determine the displacement and stress experienced by each SSCT layer. Thus, we believe this conceptual model is a first step in understanding how the SSCT layers are recruited during tendon excursion.     

神经传导测定技术对腕管综合征病情评估的价值

目的:近年来腕管综合征发病率逐年升高,然而其慢性、隐匿性不易引起人们的重视,发现时往往已造成较大的危害。本文探讨腕管综合征的神经传导测定对病情评估的临床价值,旨在为患者腕管综合征早期发现和后续治疗提供进一步的临床参考依据。方法:选取我院124例确诊的腕管综合征患者。其中无大鱼际肌萎缩者有64例,并选取平均年龄相近的64例正常人作为对照(组A);有大鱼际肌畏缩者60例,并选取平均年龄相近的60例正常人作为对照(组B)。A、B组均经行神经电图检查,握力测定和两点辨别觉测定,分析神经传导速度改变与感觉、运动功能减退程度的关系。结果:A、B两组患者均有不同程度的神经传导改变:在A组患者神经传导改变中,运动和感觉传导速度(MCV和SCV)轻度下降,运动和感觉电位波幅(CMAP和SNAP)轻度下降,潜伏期(ML)轻度延长;在B组患者神经传导中,运动和感觉传导速度(MCV和SCV)明显下降,运动和感觉电位波幅(CMAP和SNAP)明显下降,潜伏期明显延长。结论:腕管综合征患者不同的临床表现有不同程度的神经电图表现,因此神经电图对神经传导的测定结果对腕管综合征患者的病情有良好的评估价值,值得临床推广。     

Finite element simulation of the mechanical impact of computer work on the carpal tunnel syndrome

Carpal tunnel syndrome (CTS) is a clinical disorder resulting from the compression of the median nerve. The available evidence regarding the association between computer use and CTS is controversial. There is some evidence that computer mouse or keyboard work, or both are associated with the development of CTS. Despite the availability of pressure measurements in the carpal tunnel during computer work (exposure to keyboard or mouse) there are no available data to support a direct effect of the increased intracarpal canal pressure on the median nerve.     

肌电图检查评估腕管综合征手术效果的临床分析

目的:探讨采用肌电图检查评估腕管综合征的手术治疗效果。方法:选取35例(患侧手共39侧)临床确诊为腕管综合征并接受腕管切开减压术治疗的患者,于手术前后分别行肌电图检查,应用正中神经传导检查和拇短展肌针极肌电图检查,分析患者手术前和手术后腕部正中神经功能的变化情况。结果:手术后,患者正中神经感觉传导潜伏期异常率(33%)、正中神经运动传导潜伏期异常率(36%)较手术前(72%、74%)明显下降(P0.05),正中神经感觉传导波幅(7.40±5.05)较手术前(4.86±3.60)显著降低(P0.001),拇短展肌静息状态下失神经电位的异常率(69%)、重收缩时募集电位异常率(13%)均较手术前(85%、26%)明显下降(P0.05)。患者手术前后正中神经感觉传导速度和运动传导速度对比差异无统计学意义(P0.05)。结论:腕管切开减压术可解除正中神经卡压状态,明显恢复正中神经功能,增强拇短展肌肌力,临床治疗效果好。肌电图检查可为腕管综合征患者手术治疗效果的评估提供客观的依据。     

Estrogen and progesterone receptors in carpal tunnel syndrome

Carpal tunnel syndrome (CTS) is a compression median nerve neuropathy common in women at menopausal age. The aim of this work was to study immunohistochemically the expression of estrogen (ER) and progesterone (PR) receptors in CTS and control specimens. Biopsies of transverse carpal ligament (TCL) and flexor tendon synovitis were collected from 23 women and from 7 men undergoing surgery for median nerve decompression at the wrist for CTS. In TCL and synovial tissue, cells expressed ER and PR with statistically significant differences related to the age and sex of patients. Immunoreactivity was observed in fibroblasts of TCL, and in lining cells and fibroblasts of synovial tissue. In women, the number of ER-positive cells in the TCL and synovial tissue increased with the age, peaking at 55-70 years, and then decreasing. PR-immunoreactivity was observed only in fibroblasts of TCL and its expression decreased with age, while no immunolabeling was found in the synovial tissue. In TCL samples, the number of ER- and PR-positive cells in non-CTS patients was significantly lower than in CTS patients. These results demonstrate that ER and PR are present in TCL and flexor tendon synovitis, suggesting a role for sex steroid hormones in the pathogenesis of CTS disease.     

The mechanical properties of the rabbit carpal tunnel subsynovial connective tissue

The rabbit model is commonly used to study carpal tunnel syndrome (CTS). It has been proposed that the subsynovial connective tissue (SSCT) in the carpal tunnel may play a role in the etiology of CTS, but the material properties of the rabbit SSCT are unknown. The purpose of this study was to develop a method to measure the shear properties of the rabbit SSCT. In six rabbit cadaver forepaws, the excursion of the third digit flexor digitorum superficialis (FDS) and load to failure of the SSCT were measured in a custom device. The mean excursion to full flexion in this model was 7.08 mm (S.D. 0.77). The mean shearing force at full flexion was 317 mN (S.D. 166). At full flexion percentage of maximum shear force in the SSCT was 54.5% (S.D. 19.4). The mean energy absorbed at full flexion was 0.29 mJ (S.D. 0.31). The mean excursion needed to reach 5% of the maximum shear force was 3.04 mm (S.D. 0.99). The testing model presented in this study demonstrates structural parameters to evaluate the shear properties of the SSCT in a rabbit model. The data presented could be used for estimating sample sizes in a more comprehensive study of the effect of CTS on the SSCT properties.     

Elastic modulus of muscle and tendon with shear wave ultrasound elastography: variations with different technical settings

Standardization on Shear wave ultrasound elastography (SWUE) technical settings will not only ensure that the results are accurate, but also detect any differences over time that may be attributed to true physiological changes. The present study evaluated the variations of elastic modulus of muscle and tendon using SWUE when different technical aspects were altered. The results of this study indicated that variations of elastic modulus of muscle and tendon were found when different transducer's pressure and region of interest (ROI)'s size were applied. No significant differences in elastic modulus of the rectus femoris muscle and patellar tendon were found with different acquisition times of the SWUE sonogram. The SWUE on the muscle and tendon should be performed with the lightest transducer's pressure, a shorter acquisition time for the SWUE sonogram, while measuring the mean elastic modulus regardless the ROI's size.     

In Vivo Study of Transverse Carpal Ligament Stiffness Using Acoustic Radiation Force Impulse (ARFI) Imaging

The transverse carpal ligament (TCL) forms the volar boundary of the carpal tunnel and may provide mechanical constraint to the median nerve, leading to carpal tunnel syndrome. Therefore, the mechanical properties of the TCL are essential to better understand the etiology of carpal tunnel syndrome. The purpose of this study was to investigate the in vivo TCL stiffness using acoustic radiation force impulse (ARFI) imaging. The shear wave velocity (SWV) of the TCL was measured using Virtual Touch IQ^TM software in 15 healthy, male subjects. The skin and the thenar muscles were also examined as reference tissues. In addition, the effects of measurement location and ultrasound transducer compression on the SWV were studied. The SWV of the TCL was dependent on the tissue location, with greater SWV values within the muscle-attached region than those outside of the muscle-attached region. The SWV of the TCL was significantly smaller without compression (5.21 ± 1.08 m/s) than with compression (6.62 ± 1.18 m/s). The SWV measurements of the skin and the thenar muscles were also affected by transducer compression, but to different extents than the SWV of the TCL. Therefore to standardize the ARFI imaging procedure, it is recommended that a layer of ultrasound gel be maintained to minimize the effects of tissue compression. This study demonstrated the feasibility of ARFI imaging for assessing the stiffness characteristics of the TCL in vivo, which has the potential to identify pathomechanical changes of the tissue.     

A non-invasive method of tendon force measurement

The ability to measure the forces exerted in vivo on tendons and, consequently, the forces produced by muscles on tendons, offers a unique opportunity to investigate questions in disciplines as varied as physiology, biomechanics, orthopaedics and neuroscience. Until now, tendon loads could be assessed directly only by means of invasive sensors implanted within or attached to these collagenous structures. This study shows that the forces acting on tendons can be measured, in a non-invasive way, from the analysis of the propagation of an acoustic wave. Using the equine superficial digital flexor tendon as a model, it is demonstrated that the velocity of an ultrasonic wave propagating along the main axis of a tendon increases with the force applied to this tendon. Furthermore, we show that this velocity measurement can be performed even in the presence of skin overlying the tendon. To validate this measurement technique in vivo, the ultrasonic velocity plots obtained in the Achilles tendon at the walk were compared to the loads plots reported by other authors using invasive transducers.     

Apparent transverse compressive material properties of the digital flexor tendons and the median nerve in the carpal tunnel

Carpal tunnel syndrome is a frequently encountered peripheral nerve disorder caused by mechanical insult to the median nerve, which may in part be a result of impingement by the adjacent digital flexor tendons. Realistic finite element (FE) analysis to determine contact stresses between the flexor tendons and median nerve depends upon the use of physiologically accurate material properties. To assess the transverse compressive properties of the digital flexor tendons and median nerve, these tissues from ten cadaveric forearm specimens were compressed transversely while under axial load. The experimental compression data were used in conjunction with an FE-based optimization routine to determine apparent hyperelastic coefficients (μ and α) for a first-order Ogden material property definition. The mean coefficient pairs were μ=35.3 kPa, α=8.5 for the superficial tendons, μ=39.4 kPa, α=9.2 for the deep tendons, μ=24.9 kPa, α=10.9 for the flexor pollicis longus (FPL) tendon, and μ=12.9 kPa, α=6.5 for the median nerve. These mean Ogden coefficients indicate that the FPL tendon was more compliant at low strains than either the deep or superficial flexor tendons, and that there was no significant difference between superficial and deep flexor tendon compressive behavior. The median nerve was significantly more compliant than any of the flexor tendons. The material properties determined in this study can be used to better understand the functional mechanics of the carpal tunnel soft tissues and possible mechanisms of median nerve compressive insult, which may lead to the onset of carpal tunnel syndrome.     

Shear wave elastography of the supraspinatus muscle and tendon: Repeatability and preliminary findings

Shear wave elastography (SWE) is a promising tool for estimating musculoskeletal tissue properties, but few studies have rigorously assessed its repeatability and sources of error. The objectives of this study were to assess: (1) the extent to which probe positioning error and human user error influence measurement accuracy, (2) intra-user, inter-user, and day-to-day repeatability, and (3) the extent to which active and passive conditions affect shear wave speed (SWS) repeatability. Probe positioning and human usage errors were assessed by acquiring SWE images from custom ultrasound phantoms. Intra- and inter-user repeatability were assessed by two users acquiring five trials of supraspinatus muscle and tendon SWE images from ten human subjects. To assess day-to-day repeatability, five of the subjects were tested a second time, approximately 24 h later. Imaging of the phantoms indicated high inter-user repeatability, with intraclass correlation coefficient (ICC) values of 0.68–0.85, and RMS errors of no more than 4.1%. SWE imaging of the supraspinatus muscle and tendon had high repeatability, with intra- and inter-user ICC values of greater than 0.87 and 0.73, respectively. Day-to-day repeatability demonstrated ICC values greater than 0.33 for passive muscle, 0.48 for passive tendon, 0.65 for active muscle, and 0.94 for active tendon. This study indicates the technique has good to very good intra- and inter-user repeatability, and day-to-day repeatability is appreciably higher when SWE images are acquired under a low level of muscle activation. The findings from this study establish the feasibility and repeatability of SWE for acquiring data longitudinally in human subjects.     

The use of 2D ultrasound elastography for measuring tendon motion and strain

The goal of the current study was to investigate the fidelity of a 2D ultrasound elastography method for the measurement of tendon motion and strain. Ultrasound phantoms and ex vivo porcine flexor tendons were cyclically stretched to 4% strain while cine ultrasound radiofrequency (RF) data and video data were simultaneously collected. 2D ultrasound elastography was used to estimate tissue motion and strain from RF data, and surface tissue motion and strain were separately estimated using digital image correlation (DIC). There were strong correlations (R²>0.97) between DIC and RF measurements of phantom displacement and strain, and good agreement in estimates of peak phantom strain (DIC: 3.5±0.2%; RF: 3.7±0.1%). For tendon, elastographic estimates of displacement profiles also correlated well with DIC measurements (R²>0.92), and exhibited similar estimated peak tendon strain (DIC: 2.6±1.4%; RF: 2.2±1.3%). Elastographic tracking with B-Mode images tended to under-predict peak strain for both the phantom and tendon. This study demonstrates the capacity to use quantitative elastographic techniques to measure tendon displacement and strain within an ultrasound image window. The approach may be extendible to in vivo use on humans, which would allow for the non-invasive analysis of tendon deformation in both normal and pathological states.     

Measuring pad-pad pinch strength in a non-human primate: Macaca fascicularis.

The primary purpose of this study was to establish a methodology for determining and perhaps predicting (via regression analysis of anthropometric measures) Macaca fascicularis isometric pinch strength for a specific task. The larger purpose of this work was to properly scale a pinching task for the monkeys in order to study dose-response relationships in a non-human primate model for carpal tunnel syndrome. Three female and one male macaque (n = 4) of varying size and age were trained to perform a left-handed pad–pad pinch. The task required 60° of wrist flexion at a static pinching distance of 3 cm between the thumb and fingers. Subjects were trained for a period of 20-weeks. After that time, an analysis of performance gradients found that they had each reached a plateau in their force output. Pinch strength for the four animals ranged from 29.4 to 59.8 N. Regression analysis revealed that body mass (kg) and wrist circumference (cm) were both predictive of pinch strength, exhibiting adjusted R² values of 0.93 (p = 0.024) and 0.96 (p = 0.015), respectively. Thus, the results suggest that maximal pinch strength could be acceptably estimated in future subjects using either the wrist circumference or the body mass measures, as both were strong predictors of pad–pad pinch strength.     

A fluid-immersed multi-body contact finite element formulation for median nerve stress in the carpal tunnel

Carpal tunnel syndrome (CTS) is among the most important of the family of musculoskeletal disorders caused by chronic peripheral nerve compression. Despite the large body of research in many disciplinary areas aimed at reducing CTS incidence and/or severity, means for objective characterization of the biomechanical insult directly responsible for the disorder have received little attention. In this research, anatomical image-based human carpal tunnel finite element (FE) models were constructed to enable study of median nerve mechanical insult. The formulation included large-deformation multi-body contact between the nerve, the nine digital flexor tendons, and the carpal tunnel boundary. These contact engagements were addressed simultaneously with nerve and tendon fluid-structural interaction (FSI) with the synovial fluid within the carpal tunnel. The effects of pertinent physical parameters on median nerve stress were explored. The results suggest that median nerve stresses due to direct structural contact are typically far higher than those from fluid pressure.     

The effect of tendon loading on in-vitro carpal kinematics of the wrist joint

Measurements of in-vitro carpal kinematics of the wrist provide valuable biomechanical data. Tendon loading is often applied during cadaver experiments to simulate natural stabilizing joint compression in the wrist joint. The purpose of this study was to investigate the effect of tendon loading on carpal kinematics in-vitro.A cyclic movement was imposed on 7 cadaveric forearms while the carpal kinematics were acquired by a 4-dimensional rotational X-ray imaging system. The extensor- and flexor tendons were loaded with constant force springs of 50 N, respectively. The measurements were repeated without a load on the tendons. The effect of loading on the kinematics was tested statistically by using a linear mixed model.During flexion and extension, the proximal carpal bones were more extended with tendon loading. The lunate was on the average 2.0° (p=0.012) more extended. With tendon loading the distal carpal bones were more ulnary deviated at each angle of wrist motion. The capitate was on the average 2.4° (p=0.004) more ulnary deviated.During radioulnar deviation, the proximal carpal bones were more radially deviated with the lunate 0.7° more into radial deviation with tendon loading (p<0.001). Conversely, the bones of distal row were more flexed and supinated with the capitate 1.5° more into flexion (p=0.025) and 1.0° more into supination (p=0.011).In conclusion, the application of a constant load onto the flexor and extensor tendons in cadaver experiments has a small but statistically significant effect on the carpal kinematics during flexion–extension and radioulnar deviation.     

A comparison of flexor tenosynovectomy, open carpal tunnel release, and open carpal tunnel release with flexor tenosynovectomy in the treatment of carpal tunnel syndrome

The purpose of this study was to identify the advantages and disadvantages of performing a flexor tenosynovectomy without dividing the transverse carpal ligament, an open carpal tunnel release, and an open carpal tunnel release with flexor tenosynovectomy in the treatment of carpal tunnel syndrome. From 1990 to 1998, a retrospective study was done in which a flexor tenosynovectomy was performed in 133 patients without division of the transverse carpal ligament and compared with 68 patients who had an open carpal tunnel release and 75 patients who had an open carpal tunnel release and flexor tenosynovectomy. Patients were followed up for an average period of 30 weeks with history and physical findings and nerve conduction velocities and for an average period of 2.6 years with telephone interviews. There was a 2.3 percent incidence of pillar pain in the flexor tenosynovectomy group, which may explain the earlier return to their regular jobs at an average time of 9.9 weeks, compared with 10.7 weeks for the carpal tunnel release group and 12.0 weeks for the carpal tunnel release/flexor tenosynovectomy group. The latter two groups had an incidence of pillar pain of 12.1 percent and 25.3 percent, respectively. Postoperative grip strength was statistically significantly improved in the flexor tenosynovectomy group compared with the other two groups, where adjustments were made for sex and preoperative grip strengths with standard error of adjusted means. In the flexor tenosynovectomy group, 20.6 percent of patients had a previous open or endoscopic carpal tunnel release with recurrent carpal tunnel syndrome, compared with 5.2 percent in the open carpal tunnel release group and 21.6 percent in the open carpal tunnel release with flexor tenosynovectomy group. Excisional biopsies of flexor tenosynovium in the flexor tenosynovectomy, open carpal tunnel release, and open carpal tunnel release with flexor tenosynovectomy groups revealed an incidence of fibrosis in 89.2 percent, 88.9 percent, and 87.7 percent of specimens, respectively. Edema was a frequent finding, but an active inflammatory response was seldom seen. The findings in this study indicate that because of a significant decrease in pillar pain, a flexor tenosynovectomy in the treatment of carpal tunnel syndrome would likely benefit workers who use the palm of the hand in heavy manual or highly repetitive work by allowing them to return to regular duty sooner.     

Validation of a patient-specific one-dimensional model of the systemic arterial tree

The aim of this study is to develop and validate a patient-specific distributed model of the systemic arterial tree. This model is built using geometric and hemodynamic data measured on a specific person and validated with noninvasive measurements of flow and pressure on the same person, providing thus a patient-specific model and validation. The systemic arterial tree geometry was obtained from MR angiographic measurements. A nonlinear viscoelastic constitutive law for the arterial wall is considered. Arterial wall distensibility is based on literature data and adapted to match the wave propagation velocity of the main arteries of the specific subject, which were estimated by pressure waves traveling time. The intimal shear stress is modeled using the Witzig-Womersley theory. Blood pressure is measured using applanation tonometry and flow rate using transcranial ultrasound and phase-contrast-MRI. The model predicts pressure and flow waveforms in good qualitative and quantitative agreement with the in vivo measurements, in terms of wave shape and specific wave features. Comparison with a generic one-dimensional model shows that the patient-specific model better predicts pressure and flow at specific arterial sites. These results obtained let us conclude that a patient-specific one-dimensional model of the arterial tree is able to predict well pressure and flow waveforms in the main systemic circulation, whereas this is not always the case for a generic one-dimensional model.