Surface adhesion of fusion proteins containing the hydrophobins HFBI and HFBII from Trichoderma reesei

Hydrophobins are surface-active proteins produced by filamentous fungi, where they seem to be ubiquitous. They have a variety of roles in fungal physiology related to surface phenomena, such as adhesion, formation of surface layers, and lowering of surface tension. Hydrophobins can be divided into two classes based on the hydropathy profile of their primary sequence. We have studied the adhesion behavior of two Trichoderma reesei class II hydrophobins, HFBI and HFBII, as isolated proteins and as fusion proteins. Both hydrophobins were produced as C-terminal fusions to the core of the hydrolytic enzyme endoglucanase I from the same organism. It was shown that as a fusion partner, HFBI causes the fusion protein to efficiently immobilize to hydrophobic surfaces, such as silanized glass and Teflon. The properties of the surface-bound protein were analyzed by the enzymatic activity of the endoglucanase domain, by surface plasmon resonance (Biacore), and by a quartz crystal microbalance. We found that the HFBI fusion forms a tightly bound, rigid surface layer on a hydrophobic support. The HFBI domain also causes the fusion protein to polymerize in solution, possibly to a decamer. Although isolated HFBII binds efficiently to surfaces, it does not cause immobilization as a fusion partner, nor does it cause polymerization of the fusion protein in solution. The findings give new information on how hydrophobins function and how they can be used to immobilize fusion proteins.     

Interactions of hydrophobin proteins in solution studied by small-angle X-ray scattering

Hydrophobins are a group of very surface-active, fungal proteins known to self-assemble on various hydrophobic/hydrophilic interfaces. The self-assembled films coat fungal structures and mediate their attachment to surfaces. Hydrophobins are also soluble in water. Here, the association of hydrophobins HFBI and HFBII from Trichoderma reesei in aqueous solution was studied using small-angle x-ray scattering. Both HFBI and HFBII exist mainly as tetramers in solution in the concentration range 0.5-10 mg/ml. The assemblies of HFBII dissociate more easily than those of HFBI, which can tolerate changes of pH from 3 to 9 and temperatures in the range 5°C-60°C. The self-association of HFBI and HFBII is mainly driven by the hydrophobic effect, and addition of salts along the Hofmeister series promotes the formation of larger assemblies, whereas ethanol breaks the tetramers into monomers. The possibility that the oligomers in solution form the building blocks of the self-assembled film at the air/water interface is discussed.     

Interaction and comparison of a class I hydrophobin from Schizophyllum commune and class II hydrophobins from Trichoderma reesei

Hydrophobins fulfill a wide spectrum of functions in fungal growth and development. These proteins self-assemble at hydrophilic-hydrophobic interfaces into amphipathic membranes. Hydrophobins are divided into two classes based on their hydropathy patterns and solubility. We show here that the properties of the class II hydrophobins HFBI and HFBII of Trichoderma reesei differ from those of the class I hydrophobin SC3 of Schizophyllum commune. In contrast to SC3, self-assembly of HFBI and HFBII at the water-air interface was neither accompanied by a change in secondary structure nor by a change in ultrastructure. Moreover, maximal lowering of the water surface tension was obtained instantly or took several minutes in the case of HFBII and HFBI, respectively. In contrast, it took several hours in the case of SC3. Oil emulsions prepared with HFBI and SC3 were more stable than those of HFBII, and HFBI and SC3 also interacted more strongly with the hydrophobic Teflon surface making it wettable. Yet, the HFBI coating did not resist treatment with hot detergent, while that of SC3 remained unaffected. Interaction of all the hydrophobins with Teflon was accompanied with a change in the circular dichroism spectra, indicating the formation of an alpha-helical structure. HFBI and HFBII did not affect self-assembly of the class I hydrophobin SC3 of S. commune and vice versa. However, precipitation of SC3 was reduced by the class II hydrophobins, indicating interaction between the assemblies of both classes of hydrophobins.     

Two crystal structures of Trichoderma reesei hydrophobin HFBI--the structure of a protein amphiphile with and without detergent interaction

Hydrophobins are small fungal proteins that are highly surface active and possess a unique ability to form amphiphilic membranes through spontaneous self-assembly. The first crystal structure of a hydrophobin, Trichoderma reesei HFBII, revealed the structural basis for the function of this amphiphilic protein--a patch consisting of hydrophobic side chains on the protein surface. Here, the crystal structures of a native and a variant T. reesei hydrophobin HFBI are presented, revealing the same overall structure and functional hydrophobic patch as in the HFBII structure. However, some structural flexibility was found in the native HFBI structure: The asymmetric unit contained four molecules, and, in two of these, an area of seven residues was displaced as compared to the two other HFBI molecules and the previously determined HFBII structure. This structural change is most probably induced by multimer formation. Both the native and the N-Cys-variant of HFBI were crystallized in the presence of detergents, but an association between the protein and a detergent was only detected in the variant structure. There, the molecules were arranged into an extraordinary detergent-associated octamer and the solvent content of the crystals was 75%. This study highlights the conservation of the fold of class II hydrophobins in spite of the low sequence identity and supports our previous suggestion that concealment of the hydrophobic surface areas of the protein is the driving force in the formation of multimers and monolayers in the self-assembly process.     

Behavior of Trichoderma reesei hydrophobins in solution: interactions, dynamics, and multimer formation

Filamentous fungi utilize small amphiphilic proteins called hydrophobins in their adaptation to the environment. The hydrophobins are used to form coatings on various fungal structures, lower the surface tension of water, and to mediate surface attachment. Hydrophobins function through self-assembly at interfaces, for example, at the air-water interface, and at fungal cellular structures. Despite their high tendency to self assemble at interfaces, hydrophobins can be very soluble in water. To understand the mechanism of hydrophobin self-assembly, in this work, we have studied the behavior of two Trichoderma reesei hydrophobins, HFBI and HFBII in aqueous solution. The main methods used were F?rster resonance energy transfer (FRET) and size exclusion chromatography. A genetically engineered HFBI variant, NCys-HFBI, was utilized for the site-specific labeling of dyes for the FRET experiments. We observed the multimerization of HFBI in a concentration-dependent manner. A change from monomers to tetramers was seen when the hydrophobin concentration was increased. Interaction studies between HFBI and HFBII suggested that at low concentrations homodimers are preferred, and at higher concentrations, the heterotetramers of HFBI and HFBII are formed. In conclusion, the results support the model where hydrophobins in aqueous solutions form multimers by hydrophobic interactions. In contrast to micelles formed by detergents, the hydrophobin multimers are defined in size and involve specific protein-protein interactions.     

Protein body formation in leaves of Nicotiana benthamiana: a concentration‐dependent mechanism influenced by the presence of fusion tags

Protein bodies (PBs) are endoplasmic reticulum (ER) derived organelles originally found in seeds whose function is to accumulate seed storage proteins. It has been shown that PB formation is not limited to seeds and green fluorescent protein (GFP) fused to either elastin‐like polypeptide (ELP) or hydrophobin (HFBI) fusion tags induce the formation of PBs in leaves of N. benthamiana. In this study, we compared the ELP‐ and HFBI‐induced PBs and showed that ELP‐induced PBs are larger than HFBI‐induced PBs. The size of ELP‐ and HFBI‐induced PBs increased over time along with the accumulation levels of their fused protein. Our results show that PB formation is a concentration‐dependent mechanism in which proteins accumulating at levels higher than 0.2% of total soluble protein are capable of inducing PBs in vivo. Our results show that the presence of fusion tags is not necessary for the formation of PBs, but affects the distribution pattern and size of PBs. This was confirmed by PBs induced by fluorescent proteins as well as fungal xylanases. We noticed that in the process of PB formation, secretory and ER‐resident molecules are passively sequestered into the lumen of PBs. We propose to use this property of PBs as a tool to increase the accumulation levels of erythropoietin and human interleukin‐10 by co‐expression with PB‐inducing proteins.     

Patterning of cells on functionalized poly(dimethylsiloxane) surface prepared by hydrophobin and collagen modification

Controllable cell growth on poly(dimethylsiloxzne) (PDMS) surface is important for its potential applications in biodevices. Herein, we developed a fully biocompatible approach for patterning of cells on the PDMS surface by hydrophobin (HFBI) and collagen modification. HFBI and collagen were immobilized on the PDMS surface one after another by using copper grids as a mask. HFBI self-assembly on PDMS surface converted the PDMS surface from hydrophobic to hydrophilic, which facilitated the following immobilization of collagen. Collagen had admirable ability to support cell adhesion and growth. Consequently, the HFBI/collagen-modified PDMS surface could promote cell adhesion and growth. What is more, the native PDMS surface did not support cell adhesion and growth. Patterning of cells was achieved by directly culturing 293T cells (the human embryonic kidney cell line) on the PDMS surface patterned with HFBI/collagen. Further studies by means of gene transfection experiment in vitro showed that the patterned cells were of good bioactivities. Herein, the biocompatible preparation of cell patterns on the PDMS surface could be of many applications in biosensor device fabrication.     

Self-assembled hydrophobin protein films at the air-water interface: structural analysis and molecular engineering

Hydrophobins are amphiphilic proteins produced by filamentous fungi. They function in a variety of roles that involve interfacial interactions, as in growth through the air-water interface, adhesion to surfaces, and formation of coatings on various fungal structures. In this work, we have studied the formation of films of the class II hydrophobin HFBI from Trichoderma reesei at the air-water interface. Analysis of hydrophobin aqueous solution drops showed that a protein film is formed at the air-water interface. This elastic film was clearly visible, and it appeared to cause the drops to take unusual shapes. Because adhesion and formation of coatings are important biological functions for hydrophobins, a closer structural analysis of the film was made. The method involved picking up the surface film onto a solid substrate and imaging the surface by atomic force microscopy. High-resolution images were obtained showing both the hydrophilic and hydrophobic sides of the film at nanometer resolution. It was found that the hydrophobin film had a highly ordered structure. To study the orientation of molecules and to obtain further insight in film formation, we made variants of HFBI that could be site specifically conjugated. We then used the avidin-biotin interaction as a probe. On the basis of this work, we suggest that the unusual interfacial properties of this type of hydrophobins are due to specific molecular interactions which lead to an ordered network of proteins in the surface films that have a thickness of only one molecule. The interactions between the proteins in the network are likely to be responsible for the unusual surface elasticity of the hydrophobin film.     

Aggregation and self-assembly of hydrophobins from Trichoderma reesei: low-resolution structural models

Hydrophobins are secreted fungal proteins, which have diverse roles in fungal growth and development. They lower the surface tension of water, work as adhesive agents and coatings, and function through self-assembly. One of the characteristic properties of hydrophobins is their tendency to form fibrillar or rod-like aggregates at interfaces. Their structure is still poorly known. In a step to elucidate the structure/function relation of hydrophobin self-assembly, we present the low-resolution structure of self-assembled fibrils of the class II hydrophobin HFBII from Trichoderma reesei based on small and wide-angle x-ray scattering. We first studied the solution state (10 mg/mL) of both HFBI and HFBII and showed that they formed assemblages in aqueous solution, which have a radius of gyration of ~24 A and maximum dimension of ~65 A, corresponding to the size of a tetramer. This result was supported by size-exclusion chromatography. Undried samples of HFBII fibrils had a monoclinic crystalline structure, which changed to hexagonal when the material was dried. A low-resolution structure for the HFBII fibrils is suggested. There are data in the literature based on staining properties suggesting that hydrophobins of class I form assemblies with an amyloid structure. Comparison of the HFBII data (x-ray results, staining with thioflavin T) to published data showed that the HFBII assemblages are not amyloid.     

Amperometric glucose biosensor based on self-assembly hydrophobin with high efficiency of enzyme utilization

Hydrophobins are a family of natural self-assembling proteins with high biocompability, which are apt to form strong and ordered assembly onto many kinds of surfaces. These physical-chemical and biological properties make hydrophobins suitable for surface modification and biomolecule immobilization purposes. A class II hydrophobin HFBI was used as enzyme immobilization matrix on platinum electrode to construct amperometric glucose biosensor. Permeability of HFBI self-assembling film was optimized by selecting the proper HFBI concentration for electrode modification, in order to allow H₂O₂ permeating while prevent interfering compounds accessing. HFBI self-assembly and glucose oxidase (GOx) immobilization was monitored by quartz crystal microbalance (QCM), and characterization of the modified electrode surface was obtained by scanning electron microscope (SEM). The resulting glucose biosensors showed rapid response time within 6 s, limits of detection of 0.09 mM glucose (signal-to-noise ratio = 3), wide linear range from 0.5 to 20 mM, high sensitivity of 4.214 × 10⁻³ A M⁻¹ cm⁻², also well selectivity, reproducibility and lifetime. The all-protein modified biosensor exhibited especially high efficiency of enzyme utilization, producing at most 712 μA responsive current for per unit activity of GOx. This work provided a promising new immobilization matrix with high biocompatibility and adequate electroactivity for further research in biosensing and other surface functionalizing.     

Structural hierarchy in molecular films of two class II hydrophobins

Hydrophobins are highly surface-active proteins that are specific to filamentous fungi. They function as coatings on various fungal structures, enable aerial growth of hyphae, and facilitate attachment to surfaces. Little is known about their structures and structure-function relationships. In this work we show highly organized surface layers of hydrophobins, representing the most detailed structural study of hydrophobin films so far. Langmuir-Blodgett films of class II hydrophobins HFBI and HFBII from Trichoderma reesei were prepared and analyzed by atomic force microscopy. The films showed highly ordered two-dimensional crystalline structures. By combining our recent results on small-angle X-ray scattering of hydrophobin solutions, we found that the unit cells in the films have dimensions similar to those of tetrameric aggregates found in solutions. Further analysis leads to a model in which the building blocks of the two-dimensional crystals are shape-persistent supramolecules consisting of four hydrophobin molecules. The results also indicate functional and structural differences between HFBI and HFBII that help to explain differences in their properties. The possibility that the highly organized surface assemblies of hydrophobins could allow a route for manufacturing functional surfaces is suggested.     

Expression of a Fungal Hydrophobin in the Saccharomyces cerevisiae Cell Wall: Effect on Cell Surface Properties and Immobilization

The aim of this work was to modify the cell surface properties of Saccharomyces cerevisiae by expression of the HFBI hydrophobin of the filamentous fungus Trichoderma reesei on the yeast cell surface. The second aim was to study the immobilization capacity of the modified cells. Fusion to the Flo1p flocculin was used to target the HFBI moiety to the cell wall. Determination of cell surface characteristics with contact angle and zeta potential measurements indicated that HFBI-producing cells are more apolar and slightly less negatively charged than the parent cells. Adsorption of the yeast cells to different commercial supports was studied. A twofold increase in the binding affinity of the hydrophobin-producing yeast to hydrophobic silicone-based materials was observed, while no improvement in the interaction with hydrophilic carriers could be seen compared to that of the parent cells. Hydrophobic interactions between the yeast cells and the support are suggested to play a major role in attachment. Also, a slight increase in the initial adsorption rate of the hydrophobin yeast was observed. Furthermore, due to the engineered cell surface, hydrophobin-producing yeast cells were efficiently separated in an aqueous two-phase system by using a nonionic polyoxyethylene detergent, C_12-18EO₅.     

Expression of a fungal hydrophobin in the Saccharomyces cerevisiae cell wall: effect on cell surface properties and immobilization

The aim of this work was to modify the cell surface properties of Saccharomyces cerevisiae by expression of the HFBI hydrophobin of the filamentous fungus Trichoderma reesei on the yeast cell surface. The second aim was to study the immobilization capacity of the modified cells. Fusion to the Flo1p flocculin was used to target the HFBI moiety to the cell wall. Determination of cell surface characteristics with contact angle and zeta potential measurements indicated that HFBI-producing cells are more apolar and slightly less negatively charged than the parent cells. Adsorption of the yeast cells to different commercial supports was studied. A twofold increase in the binding affinity of the hydrophobin-producing yeast to hydrophobic silicone-based materials was observed, while no improvement in the interaction with hydrophilic carriers could be seen compared to that of the parent cells. Hydrophobic interactions between the yeast cells and the support are suggested to play a major role in attachment. Also, a slight increase in the initial adsorption rate of the hydrophobin yeast was observed. Furthermore, due to the engineered cell surface, hydrophobin-producing yeast cells were efficiently separated in an aqueous two-phase system by using a nonionic polyoxyethylene detergent, C(12-18)EO(5).     

Effect of gene copy number and chaperone coexpression on recombinant hydrophobin HFBI biosurfactant production in Pichia pastoris

Hydrophobins are small highly surface-active fungal proteins with potential as biosurfactants in a wide array of applications. However, practical implementation of hydrophobins at large scale has been hindered by low recombinant yields. In this study, the effects of increasing hydrophobin gene copy number and overexpressing endoplasmic reticulum resident chaperone proteins Kar2p, Pdi1p, and Ero1p were explored as a means to enhance recombinant yields of the class II hydrophobin HFBI in the eukaryotic expression host Pichia pastoris. One-, 2-, and 3-copy-HFBI strains were attained using an in vitro multimer ligation approach, with strains displaying copy number stability following subsequent transformations as measured by quantitative polymerase chain reaction. Increasing HFBI copy number alone had no effect on increasing HFBI secretion, but increasing copy number in concert with chaperone overexpression synergistically increased HFBI secretion. Overexpression of PDI1 or ERO1 caused insignificant changes in HFBI secretion in 1- and 2-copy strains, but a statistically significant HFBI secretion increase in 3-copy strain. KAR2 overexpression consistently resulted in enhanced HFBI secretion in all copy number strains, with 3-copy-HFBI secreting 22±1.6 fold more than the 1-copy-HFBI/no chaperone strain. The highest increase was seen in 3-copy-HFBI/Ero1p overexpressing strain with 30±4.0 fold increase in HFBI secretion over 1-copy-HFBI/no chaperone strain. This corresponded to an expression level of approximately 330 mg/L HFBI in the 5 ml small-scale format used in this study.     

Negatively charged phospholipid membranes induce amyloid formation of medin via an alpha-helical intermediate

Medin, a recently discovered 5.5 kDa peptide, is associated with amyloid deposits in the medial layer of human arteries and the prevalence is nearly 100% within individuals above 50 years. Presently, not much is known about its biochemical and biophysical properties or its pathway from soluble peptide to insoluble amyloid. Here we have characterized the behavior of medin in the presence of lipid membranes, using circular dichroism, isothermal titration calorimetry, differential scanning calorimetry, size exclusion chromatography, and atomic force microscopy (AFM). Medin was shown to exist as a monomer in solution with a predominantly random-coil structure. It binds lipid vesicles that have either a neutral or a negative surface potential. Upon association to membranes containing acidic lipids, it undergoes an electrostatically driven conformational change towards a mainly α-helical state. Prolonged incubation converts medin from an α-helical structure into an amyloid β-sheet fibrillar state as confirmed by AFM. Based on these findings, we propose a mechanism of medin-amyloid formation where medin electrostatically associates in its monomeric form to biological interfaces displaying a negative potential. This process both increases the local peptide concentration and induces an aggregation-prone α-helical fold.     

Heterologous expression and characterization of the hydrophobin HFBI in Pichia pastoris and evaluation of its contribution to the food industry

The class II hydrophobin HFBI from Trichoderma reesei was heterologously expressed by Pichia pastoris using pPIC9 vector under the control of the promoter AOX1. The recombinant HFBI (rHFBI) was purified by ultrafiltration and reverse-phase high performance liquid chromatography. Tricine-SDS-PAGE and Western blotting demonstrated that rHFBI with the expected molecular weight of 7.5 kDa was secreted into the culture medium. X-ray photoelectron spectroscopy and water contact angle measurements indicated that rHFBI could lead to the conversion of the wettability of the hydrophobic siliconized glass and hydrophilic mica surfaces relying on the self-assembly membrane on hydrophobic/hydrophilic interfaces. It was demonstrated that rHFBI had the ability to stabilize oil droplets, which was far excess of the class I hydrophobin HGFI heterologously expressed in P. pastoris (rHGFI) and the typical food emulsifier sodium caseinate. In gushing experiments, it was shown that rHFBI was a strong gushing inducer in beer, whereas rHGFI did not display any signs of gushing. This provided the potential of rHFBI to be used as a novel emulsifying agent and a predictor of gushing risk.     

Misfolding of a bacterial autotransporter

The adhesin involved in diffuse adherence (AIDA) is an autotransporter protein that confers the diffuse adherence phenotype to certain diarrheagenic Escherichia coli strains. It consists of a 49 amino acid signal peptide, a 797 amino acid passenger domain, and a 440 amino acid beta-domain integrated into the outer membrane. The beta-domain consists of two parts: the beta(1)-domain, which is predicted to form two beta-strands on the bacterial cell surface, and the beta(2)-domain, which constitutes the transmembrane domain. We have previously shown that the beta-domain can be folded from the urea-denatured state when bound to a nickel column during purification. It has not been possible to achieve proper refolding of the beta-domain in solution; instead, a misfolded state C is formed. Here, we characterize this misfolded state in greater detail, showing that despite being misfolded, C can be analyzed as a conventional conformational state, with cooperative unfolding in urea and SDS as well as showing simple exponential kinetics during its formation in the presence of lipid vesicles and detergent micelles. The kinetics of formation of C is sensitive to the lipid composition in vesicles. We have also attempted to identify biological factors that might aid folding of the beta-domain to the properly folded state. However, no purified periplasmic or cytosolic chaperone was found to increase folding yields, and no factor in a periplasmic extract was identified that could bind to C. We conclude that it is the exposure to the unique spatial arrangement of the bacterial cell that leads to proper refolding of the beta-domain.     

Solution structure and interface‐driven self‐assembly of NC2, a new member of the Class II hydrophobin proteins

Hydrophobins are fungal proteins that self‐assemble spontaneously to form amphipathic monolayers at hydrophobic:hydrophilic interfaces. Hydrophobin assemblies facilitate fungal transitions between wet and dry environments and interactions with plant and animal hosts. NC2 is a previously uncharacterized hydrophobin from Neurospora crassa. It is a highly surface active protein and is able to form protein layers on a water:air interface that stabilize air bubbles. On a hydrophobic substrate, NC2 forms layers consisting of an ordered network of protein molecules, which dramatically decrease the water contact angle. The solution structure and dynamics of NC2 have been determined using nuclear magnetic resonance spectroscopy. The structure of this protein displays the same core fold as observed in other hydrophobin structures determined to date, including the Class II hydrophobins HFBI and HFBII from Trichoderma reesei, but certain features illuminate the structural differences between Classes I and II hydrophobins and also highlight the variations between structures of Class II hydrophobin family members. The unique properties of hydrophobins have attracted much attention for biotechnology applications. The insights obtained through determining the structure, biophysical properties and assembly characteristics of NC2 will facilitate the development of hydrophobin‐based applications. Proteins 2014; 82:990–1003. © 2013 Wiley Periodicals, Inc.     

Structure of Avian Thymic Hormone, a High-Affinity Avian β-Parvalbumin, in the Ca-Free and Ca-Bound States

Originally isolated on the basis of its capacity to stimulate T-cell maturation and proliferation, avian thymic hormone (ATH) is nevertheless a parvalbumin, one of two β-lineage isoforms expressed in birds. We recently learned that addition of Ca²⁺-free ATH to a solution of 8-anilinonaphthalene-1-sulfonate (ANS) markedly increases ANS emission. This behavior, not observed in the presence of Ca²⁺, suggests that apolar surface area buried in the Ca²⁺-bound state becomes solvent accessible upon Ca²⁺ removal. In order to elucidate the conformational alterations that accompany Ca²⁺ binding, we have obtained the solution structure of the Ca²⁺-free protein using NMR spectroscopy and compared it to the Ca²⁺-loaded protein, solved by X-ray crystallography. Although the metal-ion-binding (CD-EF) domains are largely coincident in the superimposed structures, a major difference is observed in the AB domains. The tight association of helix B with the E and F helices in the Ca²⁺-bound state is lost upon removal of Ca²⁺, producing a deep hydrophobic cavity. The B helix also undergoes substantial rotation, exposing the side chains of F24, Y26, F29, and F30 to solvent. Presumably, the increase in ANS emission observed in the presence of unliganded ATH reflects the interaction of these hydrophobic residues with the fluorescent probe. The increased solvent exposure of apolar surface area in the Ca²⁺-free protein is consistent with previously collected scanning calorimetry data, which indicated an unusually low change in heat capacity upon thermal denaturation. The Ca²⁺-free structure also provides added insight into the magnitude of ligation-linked conformational alteration compatible with a high-affinity metal-ion-binding signature. The exposure of substantial apolar surface area suggests the intriguing possibility that ATH could function as a reverse Ca²⁺ sensor.     

A novel two-step extraction method with detergent/polymer systems for primary recovery of the fusion protein endoglucanase I–hydrophobin I

Extraction systems for hydrophobically tagged proteins have been developed based on phase separation in aqueous solutions of non-ionic detergents and polymers. The systems have earlier only been applied for separation of membrane proteins. Here, we examine the partitioning and purification of the amphiphilic fusion protein endoglucanase I_core–hydrophobin I (EGI_core–HFBI) from culture filtrate originating from a Trichoderma reesei fermentation. The micelle extraction system was formed by mixing the non-ionic detergent Triton X-114 or Triton X-100 with the hydroxypropyl starch polymer, Reppal PES100. The detergent/polymer aqueous two-phase systems resulted in both better separation characteristics and increased robustness compared to cloud point extraction in a Triton X-114/water system. Separation and robustness were characterized for the parameters: temperature, protein and salt additions. In the Triton X-114/Reppal PES100 detergent/polymer system EGI_core–HFBI strongly partitioned into the micelle-rich phase with a partition coefficient (K) of 15 and was separated from hydrophilic proteins, which preferably partitioned to the polymer phase. After the primary recovery step, EGI_core–HFBI was quantitatively back-extracted (K_{EGIcore–HFBI}=150, yield=99%) into a water phase. In this second step, ethylene oxide–propylene oxide (EOPO) copolymers were added to the micelle-rich phase and temperature-induced phase separation at 55°C was performed. Total recovery of EGI_core–HFBI after the two separation steps was 90% with a volume reduction of six times. For thermolabile proteins, the back-extraction temperature could be decreased to room temperature by using a hydrophobically modified EOPO copolymer, with slightly lower yield. The addition of thermoseparating co-polymer is a novel approach to remove detergent and effectively releases the fusion protein EGI_core–HFBI into a water phase.