Biosurfactant production by thermophilic dairy streptococci

Biosurfactant production of eight Streptococcus thermophilus strains, isolated from heat exchanger plates in the downstream side of the regenerator section of pasteurizers in the dairy industry has been measured using axisymmetric drop shape analysis by profile (ADSA-P). Strains were grown in M17 broth with either lactose, saccharose or glucose added. After harvesting, cells were suspended in water or in 10 mm potassium phosphate buffer, pH 7.0, and suspension droplets were put on a piece of FEP-Teflon. Changes in droplet profile were analysed by ADSA-P to yield the surface tension decrease due to biosurfactant production as a function of time. Surface tension decreases larger than 8 mJ·m^–2 were taken as indicative of biosurfactant production. Only five strains produced biosurfactants in water, solely when saccharose was added to the growth medium. In buffer, all strains produced biosurfactants and production was generally greater than in water. Also, most strains suspended in buffer produced maximally when saccharose was added to the growth medium, whereas one strain produced maximally in buffer upon the addition of glucose. Four strains suspended in buffer produced biosurfactants when glucose was added and only two strains when lactose was added. The possible role of these biosurfactants as anti-adhesives in the dairy industry and for the survival of these strains in natural systems is discussed.Correspondence to: H. J. Busscher     

Biosurfactant-Mediated Biodegradation of Polycyclic Aromatic Hydrocarbons—Naphthalene

The present study is aimed at the naphthalene degradation with and without biosurfactant produced from Pseudomonas aeruginosa isolated from oil-contaminated soil. The present study was carried out to isolate the bacterial strains for the naphthalene degradation and also for biosurfactant production. The isolated strains were screened for their ability to degrade the naphthalene by the methods of optimum growth rate test and for the production of biosurfactants by cetyltrimethylammonium bromide, blood agar medium, and thin-layer chromatography. The present study also focused on the effect of biosurfactant for the degradation of naphthalene by isolate-1. Two bacterial strains were isolated and screened, one for biodegradation and another for biosurfactant production. The second organism was identified as Pseudomonas aeruginosa by 16S rRNA analysis. The purified biosurfactant reduces the surface tension of water and also forms stable emulsification with hexadecane and kerosene. The end product of naphthalene degradation was estimated as salicylic acid equivalent by spectrophotometric method. The results demonstrated that Pseudomonas aeruginosa has the potential to produce biosurfactant, which enhances the biodegradation of naphthalene. The study reflects the potential use of biosurfactants for an effective bioremediation in the management of contaminated soils.     

Capacity for biosurfactant production of environmental Pseudomonas and Vibrionaceae growing on carbohydrates

Summary Pseudomonas and Vibrionaceae strains with the capacity to produce biosurfactants when growing on sucrose were isolated from the environment by a simple screening procedure. Agargrown colonies were randomly selected; each colony was suspended in a water droplet on a microscope slide. The tested strain was regarded as positive if the droplet spread over the surface.1779 Pseudomonas and 660 Vibrionaceae isolates were tested; 1% and 0.8% of the isolates, respectively, were positive for biosurfactant production. No production was detected amongst the isolates of a control group of 538 Gram-positive and 1063 Gram-negative strains.Four biosurfactant producing strains were grown in fermenter cultures on a semisynthetic medium using sucrose as carbon and energy source. The terminal concentrations of biosurfactants were in the range of a factor 40 times the critical micelle dilution. One P. fluorescens strain was grown in a carbon limited chemostat (succinate). The biosurfactant production was successively decreasing until it stopped after less than ten generation times.     

Antimicrobial potential of a lipopeptide biosurfactant derived from a marine Bacillus circulans

Aims: To isolate the biologically active fraction of the lipopeptide biosurfactant produced by a marine Bacillus circulans and study its antimicrobial potentials. Methods and Results: The marine isolate B. circulans was cultivated in glucose mineral salts medium and the crude biosurfactant was isolated by chemical isolation method. The crude biosurfactants were solvent extracted with methanol and the methanol extract was subjected to reverse phase high‐performance liquid chromatography (HPLC). The crude biosurfactants resolved into six major fractions in HPLC. The sixth HPLC fraction eluting at a retention time of 27·3 min showed the maximum surface tension‐reducing property and reduced the surface tension of water from 72 mNm^?1 to 28 mNm^?1. Only this fraction was found to posses bioactivity and showed a pronounced antimicrobial action against a panel of Gram‐positive and Gram‐negative pathogenic and semi‐pathogenic micro‐organisms including a few multidrug‐resistant (MDR) pathogenic clinical isolates. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of this antimicrobial fraction of the biosurfactant were determined for these test organisms. The biosurfactant was found to be active against Gram‐negative bacteria such as Proteus vulgaris and Alcaligens faecalis at a concentration as low as 10 μg ml^?1. The biosurfactant was also active against methicillin‐resistant Staphylococcus aureus (MRSA) and other MDR pathogenic strains. The chemical identity of this bioactive biosurfactant fraction was determined by post chromatographic detection using thin layer chromatography (TLC) and also by Fourier transform infrared (FTIR) spectroscopy. The antimicrobial HPLC fraction resolved as a single spot on TLC and showed positive reaction with ninhydrin, iodine and rhodamine‐B reagents, indicating its lipopeptide nature. IR absorption by this fraction also showed similar and overlapping patterns with that of other lipopeptide biosurfactants such as surfactin and lichenysin, proving this biosurfactant fraction to be a lipopeptide. The biosurfactant did not show any haemolytic activity when tested on blood agar plates, unlike the lipopeptide biosurfactant surfactin produced by Bacillus subtilis. Conclusions: The biosurfactant produced by marine B. circulans had a potent antimicrobial activity against Gram‐positive and Gram‐negative pathogenic and semi‐pathogenic microbial strains including MDR strains. Only one of the HPLC fractions of the crude biosurfactants was responsible for its antimicrobial action. The antimicrobial lipopeptide biosurfactant fraction was also found to be nonhaemolytic in nature. Significance and impact of the study: This work presents a nonhaemolytic lipopeptide biosurfactant produced by a marine micro‐organism possessing a pronounced antimicrobial action against a wide range of bacteria. There is a high demand for new antimicrobial agents because of the increased resistance shown by pathogenic micro‐organisms against the existing antimicrobial drugs. This study provides an insight into the search of new bioactive molecules from marine micro‐organisms.     

Production of water-soluble surface-active exolipids by Torulopsis apicola

Summary Several Torulopsis yeasts were screened for production of extracellular surface-active compounds. One strain, Torulopsis apicola IMET 43747, was studied in greater detail. Both on nalkanes and on carbohydrates it produced a mixture of water-soluble biosurfactants with remarkable interfacial activities and surface-tension values around 30 mN m^-1 and interfacial tension below 1 mN m^-1. Most of the biosurfactants are produced in the late exponential and in the early stationary growth phase. Production was increased by using hydrophobic compounds as the carbon source. The yields on n-alkanes were influenced by the concentrations of both the carbon source and the yeast extract. The effects of one purified biosurfactant on microbial growth on nalkanes and its antibacterial and antiphagal activities reveal new physiological aspects of biosurfactant generation by T. apicola.     

Anti-adhesion activity of two biosurfactants produced by <Emphasis Type="Italic">Bacillus</Emphasis> spp. prevents biofilm formation of human bacterial pathogens

In this work, two biosurfactant-producing strains, Bacillus subtilis and Bacillus licheniformis, have been characterized. Both strains were able to grow at high salinity conditions and produce biosurfactants up to 10% NaCl. Both extracted-enriched biosurfactants showed good surface tension reduction of water, from 72 to 26–30 mN/m, low critical micelle concentration, and high resistance to pH and salinity. The potential of the two lipopeptide biosurfactants at inhibiting biofilm adhesion of pathogenic bacteria was demonstrated by using the MBEC device. The two biosurfactants showed interesting specific anti-adhesion activity being able to inhibit selectively biofilm formation of two pathogenic strains. In particular, Escherichia coli CFT073 and Staphylococcus aureus ATCC 29213 biofilm formation was decreased of 97% and 90%, respectively. The V9T14 biosurfactant active on the Gram-negative strain was ineffective against the Gram-positive and the opposite for the V19T21. This activity was observed either by coating the polystyrene surface or by adding the biosurfactant to the inoculum. Two fractions from each purified biosurfactant, obtained by flash chromatography, fractions (I) and (II), showed that fraction (II), belonging to fengycin-like family, was responsible for the anti-adhesion activity against biofilm of both strains.     

Bench-Scale Production of Biosurfactants and their Potential in Ex-Situ MEOR Application

The fermentative production of biosurfactants by five Bacillus strains in a bench-scale bioreactor and evaluation of biosurfactant-based enhanced oil recovery using sand pack columns were investigated. Adjusting the initial dissolved oxygen to 100% saturation, without any further control and with collection of foam and recycling of biomass, gave higher biosurfactant production. The microorganisms were able to produce biosurfactants, thus reducing the surface tension and interfacial tension to 28 mN/m and 5.8–0.5 mN/m, respectively, in less than 10 hours. The crude surfactant concentration of 0.08–1.1 g/L, and critical micelle concentration (CMC) values of 19.4–39 mg/L, corresponding to the biosurfactants produced by the different Bacillus strains, were observed. The efficiency of crude biosurfactant preparation obtained from Bacillus strains for enhanced oil recovery, by sand pack column studies, revealed it to vary from 30.22–34.19% of the water flood residual oil saturation. The results are indicative of the potential of the strains for the development of ex-situ, microbial-enhanced, oil recovery processes.     

Isolation and characterisation of surface active compound-producing bacteria from hydrocarbon-contaminated environments

Bacteria able to produce surface active compounds (SACs) were isolated from hydrocarbon-contaminated environments. The phylogenetic diversity of the isolates was evaluated by 16S rRNA gene analysis. The production of bioemulsifiers and biosurfactants was determined on strains representative of 18 different bacterial genera. Cupriavidus sp. BSNC28C produced extracellular biosurfactants which reduce the surface tension into the culture medium up to 37.1 mN m⁻¹. Sixteen strains, belonging to 11 different genera, released extracellular emulsifiers able to stabilise oil–water emulsions. Among them, the strains Bradyrhizobium sp. BSNC30A and Bosea sp. BSNC5B showed emulsification activities comparable to those of synthetic surfactants. Overall, the novel SAC-producing strains characterised in this work display promising features for the future development of economically efficient industrial-scale biotechnological processes.     

Characterization and properties of biosurfactants produced by a newly isolated strain <Emphasis Type="Italic">Bacillus methylotrophicus</Emphasis> DCS1 and their applications in enhancing solubility of hydrocarbon

Six biosurfactant-producing bacteria were isolated from hydrocarbon contaminated soils in Sfax, Tunisia. Isolates were screened for biosurfactant production by different conventional methods including hemolytic activity, surface tension reduction, drop-collapsing and oil displacement tests. All these screening tests show that all the isolates behave differently. Among the isolated bacteria, DCS1 strain was selected for further studies based on its highest activities and it was identified as Bacillus methylotrophicus DCS1. This strain was found to be a potent producer of biosurfactant when cultivated in mineral-salts medium supplemented with diesel oil (2 %, v/v) as a sole carbon source. Physicochemical properties and stability of biosurfactants synthesized by B. methylotrophicus DCS1 were investigated. The produced biosurfactants DCS1, from Landy medium, possess high surface activity that could lower the surface tension of water to a value of 31 from 72 mN m^?1 and have a critical micelle concentration (CMC) of 100 mg L^?1. Compared with SDS and Tween 80, biosurfactants showed excellent emulsification activities against different hydrocarbon substrates and high solubilization efficiency towards diesel oil. Biosurfactants DCS1 showed good stability in a wide range of temperature, pH and salinity. These results suggested that biosurfactants produced by B. methylotrophicus DCS1 could be an alternative to chemically synthesized surfactants for use in bioremediation processes to enhance the solubility of hydrophobic compounds.     

Identification and ultra‐high‐performance liquid chromatography coupled with high‐resolution mass spectrometry characterization of biosurfactants,including a new surfactin,isolated from oil‐contaminated environments

Biosurfactant‐producing bacteria were isolated from samples collected in areas contaminated with crude oil. The isolates were screened for biosurfactant production using qualitative drop‐collapse test, oil‐spreading and emulsification assays, and measurement of their tensoactive properties. Five isolates tested positive for in the screening experiments and displayed decrease in the surface tension below 30 mN m^?1. The biosurfactants produced by these isolates were further investigated and their molecular identification revealed that they are bacteria related to the Bacillus genus. Additionally, the biosurfactants produced were chemically characterized via UHPLC‐HRMS experiments, indicating the production of surfactin homologues, including a new class of these molecules.     

Biosurfactants from thermophilic dairy streptococci and their potential role in the fouling control of heat exchanger plates

Recent work on biosurfactant release by thermophilic dairy streptococci is reviewed. There is a suggestion thatStreptococcus thermophilus isolates may release biosurfactants that stimulate detachment of already-adhering cells and leave an anti-adhesive coating on a substratum. A previously published rapid screening method is described for the identification of biosurfactant-releasing microorganisms, and growth medium supplements to enhance biosurfactant release by thermophilic dairy streptococci are reported. New experimental work described includes the isolation and purification of biosurfactants from dairy isolates by thin layer chromatography. Many compounds isolated were extremely surface-active and reduced the water surface tension to values around 30 mJ m^–2 at a concentration of 10 mg ml^–1. Most importantly, the thin layer chromatograms of various isolates resembled each other, and an adsorbed purified compound from one isolate retarded the deposition to glass of another isolate by a factor of two. Provided our findings implicate that these biosurfactants could also be adsorbed to heat exchanger plates in pasteurizers and thereby retard colonization by thermophilic streptococci, these compounds may have major economic implications. Further work is required, however.     

Inhibition of Streptococcus mutans NS Adhesion to Glass with and without a Salivary Conditioning Film by Biosurfactant- Releasing Streptococcus mitis Strains

The release of biosurfactants by adhering microorganisms as a defense mechanism against other colonizing strains on the same substratum surface has been described previously for probiotic bacteria in the urogenital tract, the intestines, and the oropharynx but not for microorganisms in the oral cavity. Two Streptococcus mitis strains (BA and BMS) released maximal amounts of biosurfactants when they were grown in the presence of sucrose and were harvested in the early stationary phase. The S. mitis biosurfactants reduced the surface tensions of aqueous solutions to about 30 to 40 mJ m⁻². Biochemical and physicochemical analyses revealed that the biosurfactants released were glycolipids. An acid-precipitated fraction was extremely surfactive and was identified as a rhamnolipidlike compound. In a parallel-plate flow chamber, the number of Streptococcus mutans NS cells adhering to glass with and without a salivary conditioning film in the presence of biosurfactant-releasing S. mitis BA and BMS (surface coverage, 1 to 4%) was significantly reduced compared with the number of S. mutans NS cells adhering to glass in the absence of S. mitis. S. mutans NS adhesion in the presence of non-biosurfactant-releasing S. mitis BA and BMS was not reduced at all. In addition, preadsorption of isolated S. mitis biosurfactants to glass drastically reduced the adhesion of S. mutans NS cells and the strength of their bonds to glass, as shown by the increased percentage of S. mutans NS cells detached by the passage of air bubbles through the flow chamber. Preadsorption of the acid-precipitated fraction inhibited S. mutans adhesion up to 80% in a dose-responsive manner. These observations indicate that S. mitis plays a protective role in the oral cavity and protects against colonization of saliva-coated surfaces by cariogenic S. mutans.     

The Influence of Biosurfactants Released by S. mitis BMS on the Adhesion of Pioneer Strains and Cariogenic Bacteria

The influence of Streptococcus mitis BMS biosurfactants on the adhesion of eight pioneer and four cariogenic oral bacterial strains was, for a first screening, examined in a microtiter plate assay. The adhesion to pellicle-coated wells of three cariogenic strains was inhibited > 70% by the biosurfactants, while only one pioneer strain showed > 70% reduction. The reduction for the other strains did not exceed 50%. Subsequently, adhesion of Streptococcus mutans ATCC 25175 and Streptococcus sobrinus HG 1025, both cariogenic strains, and Actinomyces naeslundii T14V-J1 and Streptococcus oralis J22, two pioneer strains, to biosurfactants-coated enamel with and without a salivary pellicle was studied in a parallel plate flow chamber. A biosurfactants coating to enamel with or without a pellicle caused a reduction in the number of adhering cariogenic organisms, although no such reduction was observed for the pioneer strains. Consequently, it is concluded that S. mitis BMS biosurfactants may play a protective role against adhesion of cariogenic bacteria.     

Biodegradability of bacterial surfactants

This work aimed at evaluating the biodegradability of different bacterial surfactants in liquid medium and in soil microcosms. The biodegradability of biosurfactants by pure and mixed bacterial cultures was evaluated through CO₂ evolution. Three bacterial strains, Acinetobacter baumanni LBBMA ES11, Acinetobacter haemolyticus LBBMA 53 and Pseudomonas sp. LBBMA 101B, used the biosurfactants produced by Bacillus sp. LBBMA 111A (mixed lipopeptide), Bacillus subtilis LBBMA 155 (lipopeptide), Flavobacterium sp. LBBMA 168 (mixture of flavolipids), Dietzia Maris LBBMA 191(glycolipid) and Arthrobacter oxydans LBBMA 201(lipopeptide) as carbon sources in minimal medium. The synthetic surfactant sodium dodecyl sulfate (SDS) was also mineralized by these microorganisms, but at a lower rate. CO₂ emitted by a mixed bacterial culture in soil microcosms with biosurfactants was higher than in the microcosm containing SDS. Biosurfactant mineralization in soil was confirmed by the increase in surface tension of the soil aqueous extracts after incubation with the mixed bacterial culture. It can be concluded that, in terms of biodegradability and environmental security, these compounds are more suitable for applications in remediation technologies in comparison to synthetic surfactants. However, more information is needed on structure of biosurfactants, their interaction with soil and contaminants and scale up and cost for biosurfactant production.     

Evaluation Antimicrobial and Antiadhesive Properties of the Biosurfactant Lunasan Produced by <Emphasis Type="Italic">Candida sphaerica</Emphasis> UCP 0995

Different groups of biosurfactants exhibit diverse properties and display a variety of physiological functions in producer microorganisms; these include enhancing the solubility of hydrophobic/water-insoluble compound, heave metal binding, bacterial pathogenesis, cell adhesion and aggregation, quorum sensing and biofilm formation. Candida sphaerica was grown in a low cost medium, consisting of distilled water supplemented with 9% refinery residue of soybean oil and 9% corn steep liquor, for 144 h at 28°C and 150 rpm. The cell-free supernatant obtained at the end of the experiments was submitted to extraction, and afterward the biosurfactant was isolated using methanol with a yield of 9 g l⁻¹. The critical micelle concentration of the biosurfactant was found to be 0.25 mg ml⁻¹ with a surface tension of 25 mN m⁻¹. Several concentrations of the biosurfactant (0.625–10 mg ml⁻¹) were used to evaluate its antimicrobial and antiadhesive activities against a variety of microorganisms. The biosurfactant showed antimicrobial activity against Streptococcus oralis (68%), Candida albicans (57%), and Staphylococcus epidermidis(57.6%) for the highest concentration tested. Furthermore, the biosurfactant at a concentration of 10 mg ml⁻¹ inhibited the adhesion between 80 and 92% of Pseudomonas aeruginosa, Streptococcus agalactiae, Streptococcus sanguis12. Inhibition of adhesion with percentages near 100% occurred for the higher concentrations of biosurfactant used. Results gathered in this study point to a potential use of the biosurfactant in biomedical applications.     

Simultaneous hydrocarbon biodegradation and biosurfactant production by oilfield-selected bacteria

Aims: To study the bacterial diversity associated with hydrocarbon biodegradation potentiality and biosurfactant production of Tunisian oilfields bacteria. Methods and Results: Eight Tunisian hydrocarbonoclastic oilfields bacteria have been isolated and selected for further characterization studies. Phylogenetic analysis revealed that three thermophilic strains belonged to the genera Geobacillus, Bacillus and Brevibacillus, and that five mesophilic strains belonged to the genera Pseudomonas, Lysinibacillus, Achromobacter and Halomonas. The bacterial strains were cultivated on crude oil as sole carbon and energy sources, in the presence of different NaCl concentrations (1, 5 and 10%, w/v), and at 37 or 55°C. The hydrocarbon biodegradation potential of each strain was quantified by GC–MS. Strain C450R, phylogenetically related to the species Pseudomonas aeruginosa, showed the maximum crude oil degradation potentiality. During the growth of strain C450R on crude oil (2%, v/v), the emulsifying activity (E24) and glycoside content increased and reached values of 77 and 1·33 g l^?1, respectively. In addition, the surface tension (ST) decreased from 68 to 35·1 mN m^?1, suggesting the production of a rhamnolipid biosurfactant. Crude biosurfactant had been partially purified and characterized. It showed interest stability against temperature and salinity increasing and important emulsifying activity against oils and hydrocarbons. Conclusions: The results of this study showed the presence of diverse aerobic bacteria in Tunisian oilfields including mesophilic, thermophilic and halotolerant strains with interesting aliphatic hydrocarbon degradation potentiality, mainly for the most biosurfactant produced strains. Significance and Impact of the Study: It may be suggested that the bacterial isolates are suitable candidates for practical field application for effective in situ bioremediation of hydrocarbon‐contaminated sites.     

Rapid method for monitoring maximum biosurfactant production obtained by acetone precipitation

Summary The appearance of surface active compounds in the culture broths grown on hydrocarbons can be easily monitored by measuring the surface tension of the cell free broth. Using three bacterial strains it was found that yields of the biosurfactants were maximum at the time when lowest surface tension values were recorded. Thus reduction of surface tension of the medium is a rapid method for assay of maximum biosurfactant formation prior to their actual isolation.     

Physiological aspects of hydrocarbon emulsification, metal resistance and DNA profile of biodegrading bacteria isolated from oil polluted sites

The production of biosurfactants was evaluated for seven bacterial strains isolated from different oil contaminated sites by the Emulsification Index using diesel oil as the hydrocarbon source. Minimum Inhibitory Concentrations of Mg²⁺, Cr³⁺ and Cu²⁺ were determined to identify the less sensitive bacteria in order to select the best strains for bioremediation. Plasmid extraction was also performed in order to search for gene sequences involved with biosurfactant synthesis. All strains were able to emulsify diesel oil. Rhodococcus ruber AC239 presented the best index (58%), followed by other Rhodococcus strains. Pseudomonas aeruginosa, R. ruber AC239, AC87 and R. erytropolis AC272 presented smallest sensitivities to heavy metals used, being suitable for use in sites contaminated with high concentrations of them. No plasmid DNA was detected showing that biosurfactant coding genes should be in the chromosomal DNA.     

泡菜水中产生物表面活性剂酵母菌株的筛选

[背景]由微生物产生的生物表面活性剂(biosurfactant,BS)具有低毒性、高效性、生物可降解性等多种特性,能在一定程度上缓解化学表面活性剂所造成的环境问题,因此筛选高产、安全的BS生产菌株备受研究者的关注.[目的]从泡菜水中筛选能代谢合成药食两用型BS的微生物菌株.[方法]运用滴崩法和排油圈法从传统发酵食品泡...     

Optimization of low-cost biosurfactant production from agricultural residues through response surface methodology

Biosurfactants are surface-active compounds capable of reducing surface tension and interfacial tension. Biosurfactants are produced by various microorganisms. They are promising replacements for chemical surfactants because of biodegradability, nontoxicity, and their ability to be produced from renewable sources. However, a major obstacle in producing biosurfactants at the industrial level is the lack of cost-effectiveness. In the present study, by using corn steep liquor (CSL) as a low-cost agricultural waste, not only is the production cost reduced but a higher production yield is also achieved. Moreover, a response surface methodology (RSM) approach through the Box–Behnken method was applied to optimize the biosurfactant production level. The results found that biosurfactant production was improved around 2.3 times at optimum condition when the CSL was at a concentration of 1.88 mL/L and yeast extract was reduced to 25 times less than what was used in a basic soybean oil medium (SOM). The predicted and experimental values of responses were in reasonable agreement with each other (Pred-R² = 0.86 and adj-R² = 0.94). Optimization led to a drop in raw material price per unit of biosurfactant from $47 to $12/kg. Moreover, the biosurfactant product at a concentration of 84 mg/L could lower the surface tension of twice-distilled water from 72 mN/m to less than 28 mN/m and emulsify an equal volume of kerosene by an emulsification index of (E24) 68% in a two-phase mixture. These capabilities made these biosurfactants applicable in microbial enhanced oil recovery (MEOR), hydrocarbon remediation, and all other petroleum industry surfactant applications.