The behaviors of metal ions in the CdTe quantum dots–H2O2 chemiluminescence reaction and its sensing application

The behaviors of 15 kinds of metal ions in the thiol‐capped CdTe quantum dots (QDs)–H₂O₂ chemiluminescence (CL) reaction were investigated in detail. The results showed that Ag⁺, Cu²⁺ and Hg²⁺ could inhibit CdTe QDs and H₂O₂ CL reaction. A novel CL method for the selective determination of Ag⁺, Cu²⁺ and Hg²⁺ was developed, based on their inhibition of the reaction of CdTe QDs and H₂O₂. Under the optimal conditions, good linear relationships were realized between the CL intensity and the logarithm of concentrations of Ag⁺, Cu²⁺ and Hg²⁺. The linear ranges were from 2.0 × 10^?6 to 5.0 × 10^?8 mol L^?1 for Ag⁺, from 5.0 × 10^?6 to 7.0 × 10^?8 mol L^?1 for Cu²⁺ and from 2.0 × 10^?5 to 1.0 × 10^?7 mol L^?1 for Hg²⁺, respectively. The limits of detection (S/N = 3) were 3.0 × 10^?8, 4.0 × 10^?8 and 6.7 × 10^?8 mol L^?1 for Ag⁺, Cu²⁺ and Hg²⁺, respectively. A possible mechanism for the inhibition of CdTe QDs and H₂O₂ CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

A highly selective fluorescent chemosensor for Cu2+: synthesis and properties of a rhodamine B‐containing diarylethene

A diarylethene bearing a triazole‐linked rhodamine B unit was synthesized. Its fluorescent emission was significantly enhanced in the presence of protons or Cu²⁺ due to transformation from the pirocyclic form to open‐ring form. The fluorescence was quenched sequentially upon irradiation with 297 nm light based on the intramolecular fluorescence resonance energy transfer mechanism. In an acetonitrile: water binary solvent (1: 1 v /v), the compound showed significant fluorescent enhancement for Cu²⁺ compared with a wide range of tested metal ions with a fast response and a limit of detection of 2.86 × 10^?8 mol L^?1. Using Cu²⁺ and UV light as the chemical inputs, and fluorescence intensity at 597 nm as the output, a logic gate was developed at the molecular level. Moreover, the compound can be used with a high accuracy to detect Cu²⁺ in a natural water sample.     

Detection of mercury(II) by DNA templated gold nanoclusters based on forming thymidine–Hg2+–thymidine duplexes

We have successfully synthesized gold nanoclusters (AuNCs) templated with DNA (5′‐CCCCCCCCCCCCTTTTTT‐3′), and subsequently employed the fluorescent DNA‐AuNCs as a novel probe for sensitive detections of mercury ions (Hg²⁺). Basically, the procedure is due to the formation of thymidine–Hg²⁺–thymidine duplexes between DNA‐AuNCs and Hg²⁺, thus leading to aggregations of DNA‐AuNCs described here occurring, and facilitating their fluorescence decrease. Significantly, this decrease of fluorescent signals permitted sensitive detection of Hg²⁺ in a linear range of 0.1–100 µmol L^?1, with a detection limit of 0.083 µmol L^?1 at a signal‐to‐noise ratio of 3. Additionally, the practicality of this probe for assaying Hg²⁺ in human urine and lake water samples was further validated, and showed various advantages including simplicity, selectivity, sensitivity and low cost, demonstrating its potential to broaden ways for assaying Hg²⁺ in real samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Glutathione‐stabilized Cu nanocluster‐based fluorescent probe for sensitive and selective detection of Hg2+ in water

In this paper, an innovative and facile one‐pot method for synthesizing water‐soluble and stable fluorescent Cu nanoclusters (CuNCs), in which glutathione (GSH) served as protecting ligand and ascorbic acid (AA) as reducing agent was reported. The resultant CuNCs emitted blue‐green fluorescence at 440 nm, with a quantum yield (QD) of about 3.08%. In addition, the prepared CuNCs exhibited excellent properties such as good water solubility, photostability and high stability toward high ionic strength. On the basis of the selective quenching of Hg²⁺ on CuNCs fluorescence, which may be the result of Hg²⁺ ion‐induced aggregation of the CuNCs, the CuNCs was used for the selective and sensitive determination of Hg²⁺ in aqueous solution. The proposed analytical strategy permitted detection of Hg²⁺ in a linear range of 4 × 10^?8 to 6 × 10^?5 M, with a detection limit of 2.2 × 10^?8 M. Eventually, the practicability of this sensing approach was confirmed by its successful application to assay Hg²⁺ in tap water, Lotus lake water and river water samples with the quantitative spike recoveries ranging from 96.9% to 105.4%.     

Prevention by Ce3+ of DNA destruction caused by Hg2+ in fish intestine

The interactions between Hg²⁺, Ce³⁺, and the mixuure of Ce³⁺ and Hg²⁺, and DNA from fish intestine in vitro were investigated by using absorption spectrum and fluorescence emission spectrum. The ultraviolet absorption spectra indicated that the addition of Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ to DNA generated an obviously hypochromic effect. Meanwhile, the peak of DNA at 205.2 nm blue-shifted and at 258.2 nm red-shifted. The size of the hypochromic effect and the peak shift of DNA by metal ion treatments was Hg²⁺>Hg²⁺+Ce³⁺>Ce³⁺. The fluorescence emission spectra showed that with the addition of Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ the emission peak at about 416.2 nm of DNA did not obviously change, but the intensity reduced gradually and the sequence was Hg²⁺>Hg²⁺+Ce²⁺>Ce³⁺. Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ had 1.12, 0.19, and 0.41 binding sites to DNA, respectively; the fluorescence quenching of DNA caused by the metal ions all attributed to static quenching. The binding constants (K _A ) of binding siees were 8.98×10⁴ L/mol and 1.02×10⁴ L/mol, 5.12×10⁴ L/mol and 1.10×10³ L/mol, 6.66×10⁴ L/mol and 2.36×10³ L/mol, respectively. The results showed that Ce³⁺ could relieve the destruction of Hg²⁺ on the DNA structure.     

β‐Cyclodextrin protected Cu nanoclusters as a novel fluorescence sensor for graphene oxide in environmental water samples

This paper proposed a simple and sensitive approach for detecting graphene oxide (GO) in a wide pH range in environmental water samples using fluorescent β‐CD protected Cu NCs based on the hydrogen‐bond interactions between GO and 6‐SH‐β‐CD. The influences of dilution ratio and pH were investigated. We found that the fluorescence quenching efficiency of Cu NCs by GO remained almost the same under pH from 4 to 10, which benefitted the monitoring of GO under different pH conditions in real samples. The fluorescence quenching mechanism was also discussed. The fluorescence of β‐CD protected Cu NCs could be quenched in the presence of GO with a lowest detection concentration of 0.1 mg·L^?1. Good linear correlations were obtained over the concentration range from 0 to 30 mg·L^?1 at different pH values (pH = 4, pH = 7 and pH = 12). In addition, this method was successfully applied to the determination of GO in real samples which presents more opportunities for application in environmental and material sciences.     

Fluorescence spectra,fluorescence quantum yield and dissociation constant of sarafloxacin

In this study, the fluorescence spectra of sarafloxacin (SAR) under different pH conditions were investigated to determine the structural changes due to protonation that result from change in pH. At pH < 1.02, SAR exists in the H₃L²⁺ form for which the maximum fluorescence emission wavelength was about 455 nm. At pH 1.87–4.94, SAR exists in the H₂L⁺ form in which H₃L²⁺ loses one proton in the nitrogen molecule at the 1‐position in the quinoline ring. Fluorescence intensity was strong and steady and the maximum emission wavelength was 458 nm. At pH 7.14–9.30, the maximum emission wavelengths were gradually blue shifted to 430 nm with increase in pH, here SAR exists in the form of a bipolar ion HL in which H₂L⁺ loses a carboxyl group proton. At pH > 11.6, HL transforms into anionic L^? in which HL loses one proton from the piperazine ring, leading to a decrease in fluorescence intensity, and the maximum emission wavelength was red shifted to approximately 466 nm. The two‐step dissociation constant pKa for SAR was calculated, pK _a1 was 6.06 ± 0.37 and pK _a2 for SAR was 10.53 ± 0.19. In a pH 3.62 buffer solution with quinine sulfate as the reference, the fluorescence quantum yield of SAR at the maximum excitation wavelength of 276 nm was 0.09.     

A ratiometric fluorescence sensor based on carbon quantum dots realized the quantitative and visual detection of Hg2+

In this paper, based on the fluorescence of carbon quantum dots (CQDs) quenched by mercury ions (Hg²⁺) and the nonresponse of Hg²⁺ to rhodamine B fluorescence, a dual emission ratio fluorescence sensor was constructed to realize the quantitative detection of Hg²⁺. Under excitation at 365 nm, the fluorescence spectrum showed double emission peaks at 437 nm and 590 nm, corresponding to the fluorescence emissions of CQDs and rhodamine B, respectively. This method quantitatively detected Hg²⁺ based on the linear relationship between the ratio of the intensities of the two emission peaks F₄₃₇/F₅₉₀ and the concentration of Hg²⁺. The detection range was 10–70 nM, and the limit of detection (S/N = 3) was 3.3 nM. In addition, this method could also realize the qualitative and semiquantitative detection of Hg²⁺ according to the fluorescence colour change of the probe under ultraviolet light. After various evaluations, the method could be successfully applied to the quantitative and visual detection of Hg²⁺ in tap water, and demonstrated excellent selectivity, anti-interference performance, and repeatability of the method.     

An integrated system of pyrene and rhodamine-6G for selective colorimetric and fluorometric sensing of mercury(II)

A pyrene and rhodamine-6G functionalized simple chemosensor L is studied toward sensing of metal ions in solution extensively. L shows selective color change from colorless to pink in the presence of Hg²⁺ in acetonitrile and the UV-Vis study shows peak at 525 nm with a ε value of 5.2 × 10⁴ M⁻¹ cm⁻¹ due to selective ring opening of rhodamine spirolactam moiety. The selective sensing of Hg²⁺ by L in the presence of other metal ions and reversible nature of “OFF-ON-OFF” functionality of L by Hg²⁺ and EDTA, respectively, are also established. The fluorescence study of L in the presence of Hg²⁺ shows emission at 550 nm when excited at 525 nm (ring opened rhodamine wavelength) or 340 nm (pyrene wavelength) in dry CH₃CN. Thus L acts as a selective colorimetric and fluorometric probe (dual probe) for the Hg²⁺ in solution. Metal ion sensing ability of L is also carried out in water as well as in aqueous Hepes buffer. These studies suggest that the fluorescence output of L in presence of Hg²⁺ in aqueous environment is apparently due to the generation of acid upon addition of Hg²⁺ salt in water.     

An OFF–ON–OFF type fluorescent probe based on a naphthalene derivative for Al3+ and F− ions and its biological application

A novel fluorescent probe‐based naphthalene Schiff, 1‐(C2‐glucosyl‐ylimino‐methyl)‐naphthalene‐2‐ol (L) was synthesized by coupling d ‐glucosamine hydrochloride with 2‐hydroxy‐1‐naphthaldehyde. It exhibited excellent selectivity and highly sensitivity for Al³⁺ in ethanol with a strong fluorescence response, while other common metal ions such as Pb²⁺, Mg²⁺, Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Fe²⁺, Mn²⁺, Hg²⁺, Li⁺, Na⁺, K⁺, Fe³⁺, Cr³⁺, Zn²⁺, Ag⁺, Ba²⁺ and Ca²⁺ did not cause the same fluorescence response. The probe selectively bound Al³⁺ with a binding constant (K_a) of 5.748 × 10³ M^?1 and a lowest detection limit (LOD) of 4.08 nM. Moreover, the study found that the fluorescence of the L ? Al³⁺ complex could be quenched after addition of F^? in the same medium, while other anions, including Cl^?, Br^?, I^?, NO₂^?, NO₃^?, ClO₄^?, CO₃^2?, HCO₃^?, SO₄^2?, HSO₄^?, CH₃COO^?, PO₄^3?, HPO₄^2?, S^2? and S₂O₃^2? had nearly no influence on probe behaviour. Binding of the [L ? Al³⁺] complex to a F^? anion was established by different fluorescence titration studies, with a detection limit of 3.2 nM in ethanol. The fluorescent probe was also successfully applied in the imaging detection of Al³⁺ and F^? in living cells.     

Luminescent properties of 4‐aminobenzo‐15‐crown‐5 after preferential binding of ferric ions in aqueous solutions

We report a combined approach that introduces the use of 4‐aminobenzo‐15‐crown‐5 (4AB15C5) for the detection of ferric(III) ions by colorimetric, ultraviolet (UV)–visible light absorption, fluorescence, and live‐cell imaging techniques along with density functional theory (DFT) calculations. We have found that 4AB15C5 is sensitive and selective for binding ferric(III) ions in aqueous solutions. DFT calculations using the polarizable continuum model have been used to explain the strong binding of the ferric ion by 4AB15C5 in aqueous solutions. The detection limit in the fluorescence quenching measurements was found to be as low as 50 μM for the ferric ion with a determined Stern–Volmer constant of 1.52 × 10⁴ M^?1. Fluorescence intensity did not change for other ions tested, Fe²⁺, Co²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Ca²⁺, NH₄⁺, Na⁺, and K⁺ ions. Live‐cell fluorescence imaging was also used to check the intracellular variations in ferric ion levels. Our spectroscopic data indicated that 4AB15C5 can bind ferric ions selectively in aqueous solutions.     

A carbonothioate‐based highly selective fluorescent probe with a large Stokes shift for detection of Hg2+

Mercury (Hg) is one of the heavy metal pollutants in the environment. Even a very small amount of mercury can cause serious harm to human beings. Herein, we reported a new carbonothioate‐based fluorescent probe for the detection of Hg²⁺ without interference from other metal ions. This probe possessed a very large Stokes shift (192 nm), which could improve the detection sensitivity by minimizing the interferences resulted from self‐absorption or auto‐fluorescence. With the addition of Hg²⁺ to the probe solution, considerable fluorescence enhancement was observed. Additionally, the Hg²⁺ concentration of 0–16 μM and fluorescence intensity showed a good linear relationship (y = 22106× + 53108, R² = 0.9955). Finally, the proposed probe was used to detect Hg²⁺ in real water samples, and its result was satisfactory. Therefore, our proposed probe would provide a promising method for the determination of Hg²⁺ in the environment.     

Development of an optical sensor for chlortetracycline detection based on the fluorescence quenching of l‐tryptophan

A simple and selective spectrofluorimetric method for the detection of chlortetracycline (CTC) was studied. In pH 7.4 buffer medium l ‐tryptophan (l ‐Trp), applied as the fluorescence probe, interacted with CTC resulting in fluorescence quenching of the probe. CTC was detected with maximum excitation and emission wavelengths at λ_ex/λ_em = 275/350 nm. Notably, quenching of fluorescence intensities was positively proportional to the CTC concentration over the range of 0.65–30 μmol L^?1 and the limit of detection was 0.2 μmol L^?1. Effect of temperature shown in Stern?Volmer plots, absorption spectra and fluorescence lifetime determination, indicated that fluorescence quenching of l ‐Trp by CTC was mainly by static quenching. The proposed study used practical samples analysis satisfactorily.     

Nitrogen-rich silicon quantum dots: facile synthesis and application as a fluorescent ‘on–off–on’ probe for sensitive detection of Hg2+ and cyanide ions

The sensitive and reliable detection of Hg²⁺ and CN⁻ as harsh environmental contaminants are of great importance. In view of this, a novel ‘on–off–on’ fluorescent probe based on nitrogen-rich silicon quantum dots (NR-SiQDs) has been designed for sensitive detection of Hg²⁺ and CN⁻ ions in aqueous medium. NR-SiQDs were synthesized using a facile, one-step, and environment friendly procedure in the presence of 3-aminopropyl trimethoxysilane (APTMS) and ascorbic acid (AA) as precursors, with l -asparagine as a nitrogen source for surface modification. The NR-SiQDs exhibited strong fluorescence emission at 450 nm with 42.34% quantum yield, satisfactory salt tolerance, and superior photostability and pH stability. The fluorescence emission was effectively quenched using Hg²⁺ (turn-off) due to the formation of a nonfluorescent stable NR-SiQDs/Hg²⁺ complex, whereas after the addition of cyanide ions (CN⁻), Hg²⁺ ions could be leached from the surface of the NR-SiQDs and the fluorescence emission intensity of the quenched NR-SiQDs fully recovered (turn-on) due to the formation of highly stable [Hg(CN)₄]²⁻ species. After optimizing the response conditions, the obtained limits of detection were found to be 53 nM and 0.46 μM for Hg²⁺ and CN⁻, respectively. Finally, the NR-SiQD-based fluorescence probe was utilized to detect Hg²⁺ and CN⁻ ions in water samples and satisfactory results were obtained, suggesting its potential application for environmental monitoring.     

Determination of nucleic acid by [tetra‐(3‐methoxy‐4‐hydroxyphenyl)]–Tb3+ porphyrin as the fluorescence spectral probe in bis(2‐ethylhexyl)sulfosuccinate sodium salt micelle system

A new system for the determination of nucleic acid by rare earth metallic porphyrin of [tetra‐(3‐methoxy‐4‐hydroxyphenyl)]–Tb³⁺ [T(3‐MO‐4HP)–Tb³⁺] porphyrin as fluorescence spectral probe has been developed in this paper. Nucleic acid can enhance the fluorescence intensity of the T(3‐MO‐4HP)–Tb³⁺ porphyrin in the presence of bis(2‐ethylhexyl)sulfosuccinate sodium salt(AOT) micelle. In pH 8.00 Tris–HCl buffer solution, under optimum conditions, the enhanced fluorescence intensity is in proportion to the concentration of nucleic acids in the range of 0.05–3.00 µg mL^?1 for calf thymus DNA (ct DNA) and 0.03–4.80 µg mL^?1 for fish sperm DNA(fs DNA). Their detection limits are 0.03 and 0.01 µg mL^?1, respectively. In addition, the binding interaction mechanism between T(3‐MO‐4HP)–Tb³⁺ porphyrin and ct DNA is also investigated by resonance scattering and fluorescence spectra. The maximum binding number is calculated by molar ratio method. The new system can be used for the determination of nucleic acid in pig liver, yielding satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Simple and green approach for photoluminescent carbon dots prepared from faba bean seeds as a luminescent probe for determination of Hg+ ions and cell imaging

In this research, for the first time, a dedicated sensor was designed to detect Hg⁺ ions using photoluminescent carbon dots (CDs). Due to the preferred green synthesis of CDs from bio-resources, carbohydrate-rich faba bean seeds as a potential carbon precursor were applied to the synthesis of CDs. The CDs were prepared from the faba bean seeds using the hydrothermal method in an aqueous solution in the absence of substances such as an acid or base and any other additives. The synthesized CDs exhibited maximum emission intensity at 387 nm when excited at 310 nm and their luminescence quantum yield was calculated to be ~5.94%. Then, the fluorescence emission of CDs was examined in the presence of different metal ions. Results revealed that the CDs had good selectivity towards the Hg⁺ ions, so the fluorescence emission was significantly changed in the presence of these ions with a limit of detection (LOD) as low as 0.35 μM. Furthermore, because of their very low cytotoxicity, these CDs can be applied for cell imaging.     

Fluorescence‐based logic gate for sensing of Ca2+ and F− ions using PVP crowned chrysene nanoparticles in aqueous medium

Polyvinyl pyrrolidone (PVP) crowned chrysene nanoparticles (CHYNPs) were prepared by using a reprecipitation method. Dynamic light scattering (DLS) and scanning electron microscope (SEM) studies indicate that the monodispersed spherical nanoparticles bear a negative charge on their surfaces. The bathochromic spectral shift in the UV–visible and fluorescence spectrum of CHYNPs from chrysene (CHY) in acetone solution supports the J‐ type aggregation of nanoparticles. The aggregation‐induced enhanced emission of CHYNPs at 486 and 522 nm decreases by increasing the concentration of the Ca²⁺ ion solution. It can display an ON–OFF type fluorescence response with high selectivity towards Ca²⁺ ions aqueous medium. Furthermore, the in situ generated PVP–CHYNPs–Ca²⁺ ensemble could recover the quenched fluorescence upon the addition of fluoride anions resulting in an OFF–ON type sensor. The present method has a correlation coefficient R² = 0.988 with a detection limit of 1.22 μg/mL for Ca²⁺ in the aqueous medium. The fluorescence changes of PVP crowned CHYNPs upon the addition of Ca²⁺ and F^? can be utilized as an INHIBIT logic gate at the molecular level, using Ca²⁺ and F^? chemical inputs and the fluorescence intensity signal as output.     

A highly efficient and selective turn‐on fluorescent sensor for Hg2+, Ag+ and Ag nanoparticles based on a coumarin dithioate derivative

Based on chelation‐enhanced fluorescence, a new fluorescent coumarin derivative probe 3(1‐(7‐hydroxy‐4‐methylcoumarin)ethylidene)hydrazinecarbodithioate for Hg²⁺, Ag⁺ and Ag nanoparticles is reported. Fluorescent probe acts as a rapid and highly selective “off–on” fluorescent probe and fluorescence enhancement by factors 5 to12 times was observed upon selective complexation with Hg²⁺, Ag⁺ and Ag nanoparticles. The molar ratio plots indicated the formation of 1:1 complexes between Hg²⁺ and Ag⁺ with the probe. The linear response range covers a concentration range 0.1 × 10^–5–1.9 × 10^–5 mol/L, 0.1 × 10^–5–2.3 × 10^–5 mol/L and 0.146 × 10^–12–2.63 × 10^–12 mol/L for Hg²⁺, Ag⁺ and Ag nanoparticles, respectively. The interference effect of some anions and cations was also tested. Copyright © 2013 John Wiley & Sons, Ltd.     

A new rhodamine‐based fluorescent chemodosimeter for mercuric ions in water media

A new rhodamine–ethylenediamine–nitrothiourea conjugate (RT) was synthesized and its sensing property as a fluorescent chemodosimeter toward metal ions was explored in water media. Analytical results from absorption and fluorescence spectra revealed that the addition of Hg²⁺ ions to the aqueous solution of the chemodosimeter RT caused a distinct fluorescence OFF–ON response with a remarkable visual color change from colorless to pink; however, no clear spectral and color changes were observed from other metal ions including: Zn²⁺, Cu²⁺, Cd²⁺, Pb²⁺, Ag⁺, Fe²⁺, Cr³⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. The sensing results and the molecular structure suggested that a Hg²⁺‐induced a desulfurization reaction and cyclic guanylation of the thiourea moiety followed by ring‐opening of the rhodamine spirolactam in RT are responsible for a distinct fluorescence turn‐on signal, indicating that RT is a remarkably sensitive and selective chemodosimeter for Hg²⁺ ions in aqueous solution. Hg²⁺ within a concentration range from 0.1 to 25 μM can be determined using RT as a chemodosimeter and a detection limit of 0.04 μM is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Core–shell structured CdTe/CdS@SiO2@CdTe@SiO2 composite fluorescent spheres: Synthesis and application for Cd2+ detection

Core–shell structured quantum dot (QD)–silica fluorescent nanoparticles have attracted a great deal of attention due to the excellent optical properties of QDs and the stability of silica. In this study, core–shell structured CdTe/CdS@SiO₂@CdTe@SiO₂ fluorescent nanospheres were synthesized based on the Stöber method using multistep silica encapsulation. The second silica layer on the CdTe QDs maintained the optical stability of nanospheres and decreased adverse influences on the probe during subsequent processing. Red‐emissive CdTe/CdS QDs (630 nm) were used as a built‐in reference signal and green‐emissive CdTe QDs (550 nm) were used as a responding probe. The fluorescence of CdTe QDs was greatly quenched by added S^2?, owing to a S^2?‐induced change in the CdTe QDs surface state in the shell. Upon addition of Cd²⁺ to the S^2?‐quenched CdTe/CdS@SiO₂@CdTe@SiO₂ system, the responding signal at 550 nm was dramatically restored, whereas the emission at 630 nm remained almost unchanged; this response could be used as a ratiometric ‘off–on’ fluorescent probe for the detection of Cd²⁺. The sensing mechanism was suggested to be: the newly formed CdS‐like cluster with a higher band gap facilitated exciton/hole recombination and effectively enhanced the fluorescence of the CdTe QDs. The proposed probe shows a highly sensitive and selective response to Cd²⁺ and has potential application in the detection of Cd²⁺ in environmental or biological samples.