Study of the enzymatic hydrolysis of cellulose for production of fuel ethanol by the simultaneous saccharification and fermentation process

The biochemical conversion of cellulosic biomass to ethanol, a promising alternative fuel, can be carried out efficiently and economically using the simultaneous saccharification and fermentation (SSF) process. The SSF integrates the enzymatic hydrolysis of cellulose to glucose, catalyzed by the synergistic action of cellulase and beta-glucosidase, with the fermentative synthesis of ethanol. Because the enzymatic step determines the ethanol. Because the enzymatic step determines the availability of glucose to the ethanologenic fermentation, the kinetic of cellulose hydrolysis by cellulase and beta-glucosidase and the susceptibility of the two enzymes to inhibition by hydrolysis and fermentation products are of significant importance to the SSF performance and were investigated under realistic SSF conditions. A previously developed SSF mathematical model was used to conceptualize the depolymerization of cellulose. The model was regressed to the collected data to determine the values of the enzyme parameters and was found to satisfactorily predict the kinetics of cellulose hydrolysis. Cellobiose and glucose were identified as the strongest inhibitors of cellulase and beta-glucosidase, respectively. Experimental and modeling results are presented in light of the impact of enzymatic hydrolysis on fuel ethanol production. (c) 1993 Wiley & Sons, Inc.     

A mechanistic model for rational design of optimal cellulase mixtures

A model‐based framework is described that permits the optimal composition of cellulase enzyme mixtures to be found for lignocellulose hydrolysis. The rates of hydrolysis are shown to be dependent on the nature of the substrate. For bacterial microcrystalline cellulose (BMCC) hydrolyzed by a ternary cellulase mixture of EG2, CBHI, and CBHII, the optimal predicted mixture was 1:0:1 EG2:CBHI:CBHII at 24 h and 1:1:0 at 72 h, at loadings of 10 mg enzyme per g substrate. The model was validated with measurements of soluble cello‐oligosaccharide production from BMCC during both single enzyme and mixed enzyme hydrolysis. Three‐dimensional diagrams illustrating cellulose conversion were developed for mixtures of EG2, CBHI, CBHII acting on BMCC and predicted for other substrates with a range of substrate properties. Model predictions agreed well with experimental values of conversion after 24 h for a variety of enzyme mixtures. The predicted mixture performances for substrates with varying properties demonstrated the effects of initial degree of polymerization (DP) and surface area on the performance of cellulase mixtures. For substrates with a higher initial DP, endoglucanase enzymes accounted for a larger fraction of the optimal mixture. Substrates with low surface areas showed significantly reduced hydrolysis rates regardless of mixture composition. These insights, along with the quantitative predictions, demonstrate the utility of this model‐based framework for optimizing cellulase mixtures. Biotechnol. Bioeng. 2011;108: 2561–2570. © 2011 Wiley Periodicals, Inc.     

Preparation of cellulase concoction using differential adsorption phenomenon

Controlled depolymerization of cellulose is essential for the production of valuable cellooligosaccharides and cellobiose from lignocellulosic biomass. However, enzymatic cellulose hydrolysis involves multiple synergistically acting enzymes, making difficult to control the depolymerization process and generate desired product. This work exploits the varying adsorption properties of the cellulase components to the cellulosic substrate and aims to control the enzyme activity. Cellulase adsorption was favored on pretreated cellulosic biomass as compared to synthetic cellulose. Preferential adsorption of exocellulases was observed over endocellulase, while β-glucosidases remained unadsorbed. Adsorbed enzyme fraction with bound exocellulases when used for hydrolysis generated cellobiose predominantly, while the unadsorbed enzymes in the liquid fraction produced cellooligosaccharides majorly, owing to its high endocellulases activity. Thus, the differential adsorption phenomenon of the cellulase components can be used for the controlling cellulose hydrolysis for the production of an array of sugars.     

Effect of cellulase mole fraction and cellulose recalcitrance on synergism in cellulose hydrolysis and binding

Elucidating the molecular mechanisms that govern synergism is important for the rational engineering of cellulase mixtures. Our goal was to observe how varying the loading molar ratio of cellulases in a binary mixture and the recalcitrance of the cellulose to enzymatic degradation influenced the degree of synergistic effect (DSE) and degree of synergistic binding (DSB). The effect of cellulose recalcitrance was studied using a bacterial microcrystalline cellulose (BMCC), which was exhaustively hydrolyzed by a catalytic domain of Cel5A, an endocellulase. The remaining prehydrolyzed BMCC (PHBMCC) was used to represent a recalcitrant form of cellulose. DSE was observed to be sensitive to loading molar ratio. However, on the more recalcitrant cellulose, synergism decreased. Furthermore, the results from this study reveal that when an exocellulase (Cel6B) is mixed with either an endocellulase (Cel5A) or a processive endocellulase (Cel9A) and reacted with BMCC, synergism is observed in both hydrolysis and binding. This study also revealed that when a "classical" endocellulase (Cel5A) and a processive endocellulase (Cel9A) are mixed and reacted with BMCC, only limited synergism is observed in reducing sugar production; however, binding is clearly increased by the presence of the Cel5A.     

Kinetics of adsorption, desorption, and re-adsorption of a commercial endoglucanase in lignocellulosic suspensions

This study conducted quantitative kinetic modeling and in situ and temporally resolved measurements of adsorption, desorption, and re-adsorption of a commercial endoglucanase in lignocellulosic suspensions. The study defined a cellulase adsorption and desorption competition parameter, a pseudo rate of binding and desorption, binding and desorption capacity, as well as cellulase-binding reversibility (a thermodynamic property) and recyclability (a engineering parameter). The results indicate that both substrate chemical and physical structures play important roles in cellulase binding and desorption. Binding of a commercial cellulase onto a cellulosic substrate was reversible. Bindings to two different lignocellulosic substrates were almost irreversible. While lignin and its structure positively affect binding capacity to substrate, they negatively affect cellulase recyclability. Collapsing of substrate pores reduced cellulose accessibility and cellulase-binding capacity and increased reversibility and recyclability. Increasing temperature and pH increase cellulase desorption and increased binding reversibility and capacity. This study lays the foundation for developing effective cellulase recycling strategies.     

Effect ofMyrothecium sp. cellulase on different types of cellulose and cellulosic materials

Three types of cellulase preparations were applied to different types of cellulose and cellulosic materials. The action of these types of cellulase on cellulose powder was increased with the increase of enzyme concentration. Both carboxymethyl cellulose (CMC) and sodium carboxymethyl cellulose (Na-CMC) released high amounts of reducing sugar as affected by cellulase application. Different types of paper pulp were moderately hydrolyzed, while agricultural wastes were slightly hydrolyzed. Vegetable and fruits cellulose were equally hydrolyzed but at low rate. Pretreatment of cellulose or cellulosic materials by grinding or by swelling with phosphoric acid gave rise to increased hydrolysis by the enzyme. Cellobiose was detected chromatographically as an intermediate product of hydrolysis of both cellulose and carboxymethyl cellulose with glucose.     

Enhanced production of cellulase from a novel strain Trichoderma gamsii M501 through response surface methodology and its application in biomass saccharification

Cellulolytic enzymes produced by Trichoderma sp. have attracted interest in converting the biomass to simple sugars in the production of cellulosic ethanol. In this work, a novel cellulolytic strain M501 was isolated and identified as T. gamsii by sequencing the ITS rDNA region. The production of cellulase (CMCase) by T. gamsii M501 was enhanced by employing statistical methods. The strain grown in the optimized production medium composed of mineral salts, microcrystalline cellulose (13.7 g/l), tryptone (4.8 g/l) and trace elements (2 mL/l) at pH 5.5 and 28 °C for 72 h produced a maximum CMCase of 61.3 U/mL. The optimized production medium also showed the other enzyme activity of FPU (2.6 U/mL), β-glucosidase (2.1 U/mL), xylanase (681 U/mL) and β- xylosidase (0.6 U/mL). The crude cellulase cocktail produced by T. gamsii M501 efficiently hydrolyzed alkali pretreated sugarcane bagasse with glucose and xylose yield of 78 % and 74 % respectively at 10 % solid loading. This study is the first of its kind research on biomass saccharification using T. gamsii cellulase cocktail. Therefore, the novel strain T. gamsii M501 would be useful for further development of an enzyme cocktail for cellulosic ethanol production.     

Screening of cellulases for biofuel production: online monitoring of the enzymatic hydrolysis of insoluble cellulose using high-throughput scattered light detection

A new prospective cellulase assay simultaneously combining high-throughput, online analysis and insoluble cellulosic substrates is described. The hydrolysis of three different insoluble cellulosic substrates, catalysed by a commercial cellulase preparation from Trichoderma reesei (Celluclast), was monitored using the BioLector - allowing online monitoring of scattered light intensities in a continuously shaken microtiter plate. Cellulase activities could be quantitatively assayed using the BioLector. At low cellulase/cellulose ratios, the Michaelis-Menten parameters of the cellulase mixture were mainly affected by the crystallinity index of the cellulose. Here, the apparent maximum cellulase activities inversely correlated with the crystallinity index of the cellulose. At high cellulase/cellulose ratios the particle size of the cellulose, defining the external surface area accessible to the cellulases, was the key determining factor for cellulase activity. The developed technique was also successfully applied to evaluate the pH optimum of cellulases. Moreover, the non-hydrolytic deagglomeration of cellulose particles was investigated, for the first time, using high-throughput scattered light detection. In conclusion, this cellulase assay ideally links high-throughput, online analysis and realistic insoluble cellulosic substrates in one simple system. It will considerably simplify and accelerate fundamental research on cellulase screening.     

A functionally based model for hydrolysis of cellulose by fungal cellulase

A new functionally based kinetic model for enzymatic hydrolysis of pure cellulose by the Trichoderma cellulase system is presented. The model represents the actions of cellobiohydrolases I, cellobiohydrolase II, and endoglucanase I; and incorporates two measurable and physically interpretable substrate parameters: the degree of polymerization (DP) and the fraction of beta-glucosidic bonds accessible to cellulase, F(a) (Zhang and Lynd, 2004). Initial enzyme-limited reaction rates simulated by the model are consistent with several important behaviors reported in the literature, including the effects of substrate characteristics on exoglucanase and endoglucanase activities; the degree of endo/exoglucanase synergy; the endoglucanase partition coefficient on hydrolysis rates; and enzyme loading on relative reaction rates for different substrates. This is the first cellulase kinetic model involving a single set of kinetic parameters that is successfully applied to a variety of cellulosic substrates, and the first that describes more than one behavior associated with enzymatic hydrolysis. The model has potential utility for data accommodation and design of industrial processes, structuring, testing, and extending understanding of cellulase enzyme systems when experimental date are available, and providing guidance for functional design of cellulase systems at a molecular scale. Opportunities to further refine cellulase kinetic models are discussed, including parameters that would benefit from further study.     

鸡尾酒δ整合策略构建表达三类纤维素酶的酿酒酵母工程菌株及初步评价

木质纤维素乙醇具有替代化石燃料的潜力,其生产过程包括生物质预处理、纤维素酶生产、水解和发酵等多个步骤。将纤维素酶生产、水解和发酵组合在一起的统合生物加工过程（consolidated bioprocessing,CBP）由于能降低水解和发酵成本而具有应用于纤维素乙醇生产的潜力,该技术的关键是构建能有效降解纤维素的工程菌株,而构建表达纤维素酶的酿酒酵母即是其中一种选择。采用鸡尾酒多拷贝δ整合的策略将7种纤维素酶基因（Trichoderma reesei cbh1、cbh2和egl2,Aspergillus aculeatus cbh1、egl1和bgl1）表达盒整合至酿酒酵母W303-1A染色体上,经4轮整合筛选得到菌株LA1、LA2、LA3和LA4。对这4个菌株进行纤维素酶活性测定,结果表明从LA1到LA3各种纤维素酶活性呈递增趋势,而LA4的酶活性与LA3的酶活水平相当。对菌株LA3进行酸碱预处理玉米芯料的发酵评价,结果表明：①在外加商品化纤维素酶的情况下,与对照菌株W303-1A和AADY相比,LA3能有效利用纤维素料发酵产醇;②与分步整合的菌株W3相比,发酵性能更优;③培养基中的营养成分影响菌株发酵性能。这些结果表明,鸡尾酒δ整合是一种有效的构建酿酒酵母CBP菌株的方法。     

Sorption of Talaromyces emersonii cellulase on cellulosic substrates

The sorption characteristics of the cellulase system of Talaromyces emersonii on various cellulosic substrates were examined. Analysis of reaction mixture supernatants by electrophoresis and enzyme assay showed that all components of the cellulase system were rapidly adsorbed by cellulose and then gradually returned to the liquid phase as the hydrolysis of the substrate progressed. The extent of adsorption in the rapid phase was influenced by pH, temperature, the nature of the substrate, and its concentration.     

The Unique Binding Mode of Cellulosomal CBM4 from Clostridium thermocellum Cellobiohydrolase A

The crystal structure of the carbohydrate-binding module (CBM) 4 Ig fused domain from the cellulosomal cellulase cellobiohydrolase A (CbhA) of Clostridium thermocellum was solved in complex with cellobiose at 2.11 Å resolution. This is the first cellulosomal CBM4 crystal structure reported to date. It is similar to the previously solved noncellulosomal soluble oligosaccharide-binding CBM4 structures. However, this new structure possesses a significant feature—a binding site peptide loop with a tryptophan (Trp118) residing midway in the loop. Based on sequence alignment, this structural feature might be common to all cellulosomal clostridial CBM4 modules. Our results indicate that C. thermocellum CbhA CBM4 also has an extended binding pocket that can optimally bind to cellodextrins containing five or more sugar units. Molecular dynamics simulations and experimental binding studies with the Trp118Ala mutant suggest that Trp118 contributes to the binding and, possibly, the orientation of the module to soluble cellodextrins. Furthermore, the binding cleft aromatic residues Trp68 and Tyr110 play a crucial role in binding to bacterial microcrystalline cellulose (BMCC), amorphous cellulose, and soluble oligodextrins. Binding to BMCC is in disagreement with the structural features of the binding pocket, which does not support binding to the flat surface of crystalline cellulose, suggesting that CBM4 binds the amorphous part or the cellulose “whiskers” of BMCC. We propose that clostridial CBM4s have possibly evolved to bind the free-chain ends of crystalline cellulose in addition to their ability to bind soluble cellodextrins.     

Fusion of cellulose binding domain from Trichoderma reesei CBHI to Cryptococcus sp. S-2 cellulase enhances its binding affinity and its cellulolytic activity to insoluble cellulosic substrates

Cryptococcus sp. S-2 carboxymethyl cellulase (CSCMCase) is active in the acidic pH and lacks a binding domain. The absence of the binding domain makes the enzyme inefficient against insoluble cellulosic substrates. To enhance its binding affinity and its cellulolytic activity to insoluble cellulosic substrates, cellulose binding domain (CBD) of cellobiohydrolase I (CBHI) from Trichoderma reesei belonging to carbohydrate binding module (CBM) family 1 was fused at the C-terminus of CSCMCase. The constructed fusion enzymes (CSCMCase-CBD and CSCMCase-2CBD) were expressed in a newly recombinant expression system of Cryptococcus sp. S-2, purified to homogeneity, and then subject to detailed characterization. The recombinant fusion enzymes displayed optimal pH similar to those of the native enzyme. Compared with rCSCMCase, the recombinant fusion enzymes had acquired an increased binding affinity to insoluble cellulose and the cellulolytic activity toward insoluble cellulosic substrates (SIGMACELL^® and Avicel) was higher than that of native enzyme, confirming the presence of CBDs improve the binding and the cellulolytic activity of CSCMCase on insoluble substrates. This attribute should make CSCMCase an attractive applicant for various application.     

Studies on the mechanism of enzymatic hydrolysis of cellulosic substances.

Most cellulosic substances contain appreciable amounts of cellulose and hemicellulose, which on enzymatic hydrolysis mainly yield a mixture of glucose, cellobiose, and xylose. In this paper, studies on the mechanisms of hydrolysis of bagasse (a complex native cellulosic waste left after extraction of juice from cane sugar) by the cellulase enzyme components are described in light of their adsorption characteristics. Simultaneous adsorption of exo- and endoglucanases on hydrolyzable cellulosics is the causative factor of the hydrolysis that follows immediately after. It supports the postulate of synergistic enzyme action proposed by Eriksson. Xylanase pretreatment enhanced the hydrolysis of bagasse owing to the creation of more accessible cellulosic regions that are readily acted upon by exo- and endoglucanases. The synergistic action of the purified exoglucanase, endoglucanase, and xylanse has been found to be most effective for hydrolysis of bagasse but not for pure cellulose. Significant quantities of glucose are produced in beta-glucosidase-free cellulase action on bagasse. Individual and combined action of the purified cellulase components on hydrolysis of native and delignified bagasse are discussed in respect to the release of sugars in the hydrolysate.     

Characterization of All Family-9 Glycoside Hydrolases Synthesized by the Cellulosome-producing Bacterium Clostridium cellulolyticum

The genome of Clostridium cellulolyticum encodes 13 GH9 enzymes that display seven distinct domain organizations. All but one contain a dockerin module and were formerly detected in the cellulosomes, but only three of them were previously studied (Cel9E, Cel9G, and Cel9M). In this study, the 10 uncharacterized GH9 enzymes were overproduced in Escherichia coli and purified, and their activity pattern was investigated in the free state or in cellulosome chimeras with key cellulosomal cellulases. The newly purified GH9 enzymes, including those that share similar organization, all exhibited distinct activity patterns, various binding capacities on cellulosic substrates, and different synergies with pivotal cellulases in mini-cellulosomes. Furthermore, one enzyme (Cel9X) was characterized as the first genuine endoxyloglucanase belonging to this family, with no activity on soluble and insoluble celluloses. Another GH9 enzyme (Cel9V), whose sequence is 78% identical to the cellulosomal cellulase Cel9E, was found inactive in the free and complexed states on all tested substrates. The sole noncellulosomal GH9 (Cel9W) is a cellulase displaying a broad substrate specificity, whose engineered form bearing a dockerin can act synergistically in minicomplexes. Finally, incorporation of all GH9 cellulases in trivalent cellulosome chimera containing Cel48F and Cel9G generated a mixture of heterogeneous mini-cellulosomes that exhibit more activity on crystalline cellulose than the best homogeneous tri-functional complex. Altogether, our data emphasize the importance of GH9 diversity in bacterial cellulosomes, confirm that Cel9G is the most synergistic GH9 with the major endoprocessive cellulase Cel48F, but also identify Cel9U as an important cellulosomal component during cellulose depolymerization.     

Specific quantification of trichoderma reesei cellulases in reconstituted mixtures and its application to cellulase-cellulose binding studies

Specific quantifications of the major cellulolytic components of the Trichoderma reesei enzyme complex, i.e., endoglucanases I and III and cellobiohydrolases I and II, are described and, employing a defined mixture of these four cellulases reconstituted according to the composition of the native Trichoderma cellulase complex, used to determine the binding of each individual component onto filter paper. During substrate degradation by this enzyme mixture, the specific adsorption of each individual cellulase gradually increases and no preferential binding of one enzyme component in any particular phase of cellulose hydrolysis is found. T. reesei cellobiohydrolases I and II admixed with endoglucanases I and III represent a "full-value" cellulase system that is capable of degrading semicrystalline cellulose efficiently. In comparison with the crude Trichoderma enzyme complex, almost identical adsorption properties and similar hydrolytic efficiency are found for the reconstituted mixture. (c) 1994 John Wiley & Sons, Inc.     

Kinetic modeling of rapid enzymatic hydrolysis of crystalline cellulose after pretreatment by NMMO

Pretreatment of cellulose with an industrial cellulosic solvent, N-methylmorpholine-N-oxide, showed promising results in increasing the rate of subsequent enzymatic hydrolysis. Cotton linter was used as high crystalline cellulose. After the pretreatment, the cellulose was almost completely hydrolyzed in less than 12 h, using low enzyme loading (15 FPU/g cellulose). The pretreatment significantly decreased the total crystallinity of cellulose from 7.1 to 3.3, and drastically increased the enzyme adsorption capacity of cellulose by approximately 42 times. A semi-mechanistic model was used to describe the relationship between the cellulose concentration and the enzyme loading. In this model, two reactions for heterogeneous reaction of cellulose to glucose and cellobiose, and a homogenous reaction for cellobiose conversion to glucose was incorporated. The Langmuir model was applied to model the adsorption of cellulase onto the treated cellulose. The competitive inhibition was also considered for the effects of sugar inhibition on the rate of enzymatic hydrolysis. The kinetic parameters of the model were estimated by experimental results and evaluated.     

臭腹腺蝗肠道中共存的淀粉和纤维素消化酶的纯化、动力学和抑制研究（英文）

【目的】本研究旨在了解臭腹腺蝗 Zonocerus variegatus 中碳水化合物的消化。【方法】依次通过CM-Sepharose CL-6B 阳离子交换、QAE Sephadex A-50阴离子交换以及Sephadex G-100凝胶过滤,对臭腹腺蝗中肠的酶粗提取液（其中α-淀粉酶和纤维素酶的比活性分别为283±1.72 U/mg和 17±0.83 U/mg）进行了纯化。最后通过层析将共存的酶分离成α-淀粉酶和纤维素酶。【结果】这两种酶都是单体,α-淀粉酶分子量为38 kDa ,纤维素酶分子量为21 kDa。α-淀粉酶对淀粉的K_m 值为 13.8±1.29 mg/mL,V_max为3 883±52.25 U/mg pro;而纤维素酶对羧甲基纤维素底物的 K_m 值为5.03±0.57 mg/mL ,V_max为433.00±5.24 U/mg pro 。臭腹腺蝗α-淀粉酶能以不同的效率水解原淀粉,纤维素酶也能不同程度水解各种纤维材料。α-淀粉酶的水解活性在pH 6和40℃下最高,而纤维素酶的水解高活性在pH 9和45℃下最高。【结论】 从番木瓜 Carica papaya 种子中分离到蛋白类抑制剂,发现它们是这两种酶的有效抑制剂,说明这些蛋白抑制剂(CpAI和 CpCI)如果在害虫取食的作物上过量表达,则可能有利于害虫防治。尽管纤维类和淀粉类物质可能都显著提供该害虫的能量需求,但是动力学分析表明臭腹腺蝗更偏向于淀粉类食物。